that 18 minute video was probably one of the best fabrication videos i have seen on youtube to make a spoked wheen and have it even and run true is amazing..especialy making it by hand.
Nice custom wheel, with so many weld points, can it be strong enough, also what about the balance, can you show it on the wheel machine check it's balance?
It's amazing. VERY well done, the spokes with flames look 10/10 👏👏 Man, the process is immaculate!! One question: is it possible to braze on top on the TIG welds located where the spokes join the rim and hub, so it looks the same color as the flames? Doing this you could have a TIG weld with silicon braze on top; then you could shape the weld bead with the pneumatic belt grinder making a neat joint with golden color 😉 Greetings from Argentina!
I'll never look at a tire machine the same way again ...genius use of one , a bit worried about the crankcase oiling with the engine angled that way all the time and not just the occasional hill
Interesting… but two questions: why cut off the rim flanges of the wheel at such a late stage? To keep things rigid during welding, or a change of plan? And, erm… brakes? Don’t you want to stop? I suppose not having any front brake cures the problem of trying to keep the tyre on a flangless rim under braking, but being able to stop is going to be necessary at some point!
Awesome to see the problem solving in action, fantastic example of how visuals can convey the thought process of the project, not an easy thing to do, so hats off to you sir. Side note I bet that springer weighs more than what's left of the frame and motor, but I can't wait to see what you do with it. Just subscribed so I don't miss out, so glade I found this channel.
Love yur work bro, however the gloves useng the lathe i could barley watch! Super dangerous if that glove bites! Bare hands always with something spinning with that much mass, itll take your hand if not draw your face into the turning peice before you coud even react! Anyways be safe and look foward to seeing this build complete 👍
Muito inteligente, amei,,,, só uma pequena crítica..... Tirou a borda da roda, pra por câmara de ar ??? Deixava com a borda e usava pneu sem câmara. Me perdoe,. Mas teve um pequeno erro.
![[#4] KTM Big Single Project 理想のシングルスポーツを作る vol.4](http://i.ytimg.com/vi/iD6xitsmqcQ/mqdefault.jpg)
![[Full Episode] Hell's Kitchen Thailand EP.14 | 12 พ.ค. 67](http://i.ytimg.com/vi/MNspIlqlJcc/mqdefault.jpg)
車、バイクのカスタム動画を何十年も見てきているけど、オリジナルホイルを注文するってのは見たことあるけど…アナログながらもホイル造ったの初めて見たかもｗｗｗ最高だね!!!!
SNSで一度だけこのように作ってる写真を見たことがあり今回チャレンジしました。
形だけでも完成させればと思います。
That fixture for the grinder is the coolest thing that I've seen this week.
I love the attention to detail. It's looking so good!
スプリングコンプレッサーをクランプに使ったり、廃棄のキャリパーピストンで治具作ったり、使用してる工具等も整備工場の空き時間にチョッパー制作って感じなのにクオリティ高過ぎて最高でした🤩
アイデアとセンスに脱帽です✨
ありがとうございます😊
形だけでもかっこいいチョッパー、欲を言えばしっかり走れるバイクを作りたい所です！
本業の方は真面目に丁寧にを心がけております！
This is the coolest build maaan!!💪🏼🔥🔥🔥👍🏻
This is going to be insane! Can't wait for more!
普段は、完成品しか、観てないけれど、製作工程を観ると、モノ作りの凄さを感じます❗モノへの愛着、尊さを、より一層強く感じますね❗❗
完成品が、楽しみです❗❗
時間をかけて、必ず完成させれるように頑張ります！
Sick!. love that you're back at it.
that 18 minute video was probably one of the best fabrication videos i have seen on youtube to make a spoked wheen and have it even and run true is amazing..especialy making it by hand.
Good job mate 👍👍👍
Very impressive Sir.
You are a craftsman , sir.
製作過程にここまで興味を持っていかれるとは...発想力が凄まじい、、
ありがとうございます♪無い頭を振り絞っていつも製作しております😅
Nice custom wheel, with so many weld points, can it be strong enough, also what about the balance, can you show it on the wheel machine check it's balance?
見入ってしまって思わずチャンネル登録しちゃいました！
Lots of clever fabrication in this video! I especially liked the angle grinder fixture. You gave that tire machine a workout!
So cool 😎 love it!!
Absolute madness 🔥🔥🔥 very cool indeed
待ってました。センス良いインベーダー、DAXフレームにとても合いますね。精度も出てそうで凄い.... ホイール径も細さも絶妙でバランスとても好きです。本当に楽しみです。
ありがとうございます。
実は一回作ったホイールがサイズ感とデザインが気に入らなくて、おまけに精度が出ていなかったので作り直しています。かなり時間がかかってしまったのでここから取り返していきます！
Simply Amazing…
待ってました！
very good job ! quickly next !
Nice work ! These springer front ends are heavier than the whole bike, no wheelies intended I suppose ?😄
Trabalho incrível!
It's amazing. VERY well done, the spokes with flames look 10/10 👏👏
Man, the process is immaculate!!
One question: is it possible to braze on top on the TIG welds located where the spokes join the rim and hub, so it looks the same color as the flames? Doing this you could have a TIG weld with silicon braze on top; then you could shape the weld bead with the pneumatic belt grinder making a neat joint with golden color 😉
Greetings from Argentina!
Great ❤ отличный проект!
I'll never look at a tire machine the same way again ...genius use of one , a bit worried about the crankcase oiling with the engine angled that way all the time and not just the occasional hill
Happy channel! You have earned my respect... Every time I see such great project being done. You did very well sir❤❤❤❤
Like your handmade Invader front-Wheel!!!
Amazing job!
Can’t wait to see the next video!
Eccezionale!
Nice job bro 😁😁🤘🤘
Manifique la roue. 💪👏👏👏
This is crazy!
Классно, когда руки на месте. Вид бомбический!
ほぉ～‼️
そーきましたか‼️
毎度毎度素晴らしい‼️
毎度ありがとうございます！これからも良い意味で皆さんを裏切りたいですね！
I like some elements of works style
westport wa. state here
thank you for bring me along.
I'm waiting to see how the car is completed
Nice
I was not expecting such a heavy fork on the project.
Interesting… but two questions: why cut off the rim flanges of the wheel at such a late stage? To keep things rigid during welding, or a change of plan? And, erm… brakes? Don’t you want to stop? I suppose not having any front brake cures the problem of trying to keep the tyre on a flangless rim under braking, but being able to stop is going to be necessary at some point!
bravo!
まーた何かすげー事始めましたね！
ユウチューブってこうゆうコンテンツだけで良いと思う。誰も傷付かず
Top demais
More please.... don't leave us hanging.
👍Хонда супер
Very nice job
Awesome to see the problem solving in action, fantastic example of how visuals can convey the thought process of the project, not an easy thing to do, so hats off to you sir. Side note I bet that springer weighs more than what's left of the frame and motor, but I can't wait to see what you do with it. Just subscribed so I don't miss out, so glade I found this channel.
Hell yeah!
Needs solid forks on it...
👏👏👏
ผมรอชมนานเลยคับ
Did you coat the steel with something? would be a shame if starts rusting.
Luar biasa custumnya
gostei
Love yur work bro, however the gloves useng the lathe i could barley watch! Super dangerous if that glove bites! Bare hands always with something spinning with that much mass, itll take your hand if not draw your face into the turning peice before you coud even react! Anyways be safe and look foward to seeing this build complete 👍
Muito inteligente, amei,,,, só uma pequena crítica..... Tirou a borda da roda, pra por câmara de ar ??? Deixava com a borda e usava pneu sem câmara. Me perdoe,. Mas teve um pequeno erro.
Siiiickkkk 🔥
👍🏻
サムネから漂うスーパードライ缶
ダックスにスプリンガーは楽しみすぎます！
続き楽しみなんだよね〜
👋👍
и колпачок в виде черепа поставить
молодец заморочился
круто
Класс
The motorcycle could be redesigned? Into a modern motorcycle
А как масло в двигателе будет себя чувствовать под таким наклоном?
まさかテンパータイヤをオリジナルのホイールのベースにするとは、、、やっぱけんとさんのカスタム見てるのスゲー楽しいし感心するわ～！
自分でもテンパーを再利用するとは思っていませんでしたが、また一つ経験できて良かったです😁
Las ruedas de moto más pesadas y caras del mundo mundial
Quá kỳ công Day
最後の画像見てですよねぇ状態 前輪駆動のバイク作るのかと思ってしまった
At the end the little Honda Dax weights 120 Kilogram and drives a max. of 10 Km/h.
Gears are better than chains and belts! IDK WHY THEY DON'T MAKE THEM ALL GEARS
que paso con el Chapter3 ❓
красава,брат,и очень красиво,
オススメに上がってきて初めて動画を見させて頂きました
素晴らしい技術です！
まさに「ビルダー」でございますね
で、ふと思ったのですが何故リムを切り飛ばしてしまうのですか？
ご視聴ありがとうございます😊
安全に公道が走ることが出来てようやくビルダーと名乗れるかと思いますが、僕はまだその域に達していないので恐縮です。
リムを切った理由は、このままだとタイヤがハマらなかったからです。
Вот это настоящий кастом!!!
Was not expecting the springer
Can you tell me the name of the soundtrack the sound it's so cool !!!
これは、僕のTH-camチャンネルの為に作曲して頂いたオリジナルソングです😁
気に入ってくださり、ありがとうございます。
akira's bike?
仕事キッチリ。
meron bng Honda Jutz?
subscribeded. Past, present and future tense of subscribe.
Dax chopper
what hapenned with the Honda dax?!?!
旋盤を使う際は手袋はやめましょう😢
マジで巻き込まれたら手がなくなりますよ。
逆に回転式サンドペーパーを使用するさいは、革手袋が良いと思います⭕️
So 5 months have passed. I'd like to see this project finished before you die of old age.
c'est une belle réalisation technique mais chez nous en France on trouve ça vraiment pas beau de vraiment pas beau
これ何するんやろ？こうやるんか‼︎凄‼︎が連続でした笑
BGM曲名知りたいです
ご視聴ありがとうございました！
BGMは知り合いのトラックメーカー様に作曲して頂いたのでオリジナル曲となっております。
Слепил колесо для телеги.
아직 완성 안됫나요? 기다리고 있다... 어떤 멋진 작품일지.....
かっこいいフォルムですね。
ここまで横型エンジンを勝ちあげるとヘッドにオイル循環するか心配ですね😅
バイク屋さんに昔、そう言われたことがあります。
それもどうするのかも楽しみです☺️
エンジンオイル問題ですけ。
頭を悩ませています。
なんとか成立させたいです！頑張ります!
😯😯
Молодец конечно, но слишком заморочился из чернухи делать.
Братик ждём продолжение, когда оно будет?
Nc
Yamate kudusai
still waiting :))
ハブに入れるベアリングのハウジング公差が緩くないですか？
この後メッキ施工をし公差が適正になる予定ではあります。
ですが、狙って数字を追い求められなかった部分もありその点は悔しいです。
Next post
Ngalah ngalahi pabrik