Fixing up a Husqvarna 385xp turdsaw with some new oem parts!!
ฝัง
- เผยแพร่เมื่อ 13 ก.ย. 2022
- I ordered some oem parts for a 385 turdsaw I've had hanging up for a long time.
I've been trying to piece this saw together for years. this should get me started. - ยานยนต์และพาหนะ
![[TH] LEV vs TLN | TE vs VIT - VALORANT Champions 2024 DAY 3](http://i.ytimg.com/vi/_AbmrWv2lO0/mqdefault.jpg)
Hey tin man I got a carburetor for that 385 and some other parts and pieces
I haven't tried to swap a lot of parts from my 385 and 390 but looking at them side by side the only 2 things that I see that are different is the carbs and piston and cylinder.
I'd give up my 372s for a couple of 385 saws
I run a ported 385xp with 28" and 36" bars it rips. They are kinda a black sheep, but I like mine can't even tell ya how much wood it's cut. I cut around 20 cord of fire wood a year. Good luck with it I think you'll like it when you get it done.
Tinman congratulations on you newborn baby
I got decals also
I love my 385. In fact, I love it so much I put a 404 chain and bar on it, and that saw slices through anything with major sawdust production.
Jonsered 2186 ,2188, 385, 390 are basically all the same saws
Need a ironhorse an tinman collab video on turd polishing Haha
You get that 385 running good You'll put your other saws on the sidelines , 385 is the only saw I used when I logged in the northeast PA
Got a 385 in 2004 and it still screams through the wood.
Shes comin right in huh!!!. Have a good weekend
Nice saw!
Yes they were
I believe those and the 390 are pretty close handle inserts carbs and what not
2186 and 2188 jonsered parts will match up ! Most of engine parts will work! Great old saws! I don't think you will be disappointed
I have lots of parts for those 385s
are you selling parts? I have a 385xp and you never know when you need a part
Love the 394 surprise appearance
That wrap looks as good as that 394 sounds.
Good luck on the build 💪 👍
I liked the 385 better than 390 I’ve done hundreds of those if you need parts I might have a few things for the new dad tinman🎉
The grip inserts are the same as the Jonsered 630 if that helps. I am positive that the rubber mount that the air horn sits on is the same as the 372. Mate of mine runs 390’s and I’ve had one on the bench a couple of times now. I have used both 390 and 385 and found that the 90 vibrates a bit more and noticed that it likes rattling screws out. Donny Walker said it a while ago and he is right. Good videos Mate 👍🏻
The exhaust is the same as 372. Its like a big 372.
Great vidio you can do this everyday .good times
Haven't even seen a 385 in person. Looks pretty compact for its size class! Excited to learn more about it👍🏻
Gas tank for that saw is $200
I love my 390xp.
Also scrap the 576 clutch drum, it engages lovely but after a week of running you’ll notice that it cuts the arm on the oil pump drive because it has two pegs as appose to the notches in the 372/390 clutch drum.
It is the backlash from reviewing the saw up and down and the clutch slows down faster than the worm gear then the clutch speeds up faster than the worm gear on the way up in the revs.
That saw is well worth throwing good bucks on because they are rippers!
Love my 385xp. Had it for about 5 years, I run a 32” Oregon with a full house. It’s got mild cyl porting and a ported pipe. Quite a few people badmouth the 385, but it’ll keep up with if not beat my 395!
Tinman, looking forward to the build bro. I have just built a ported one here In NZ, you will like it. Mine was strong stock. Cheers
That plate bolts on the lower case on the front of the saw by the pull starter
I think the peices for the handle will work from a 394 ,395
385... awesome! I don't see many of them at all. Interesting to see the differences between it and the bigger brothers that are the 390, 394 and 395. Very cool. Also I just want to say that I hope you were able to continue not smoking. Wish you the best with that. How is the little one? Hope all is well with the family. I know I am just a stranger but we all watch you on youtube and even though you don't know me I have gotten to know you and only hope the best for ya. Great video Tinman. Love your stuff.
Hey Erik, thanks for the comment. Baby and mom.arw doing great..
Still not smoking, hoping I can keep it up.
@@tinmanssaws Awesome man!
Beast wanting to wake up u da man tinman hope all is well 👍
The only thing the same as a 372 is spark plug fuel filter and ignition oh ya clutch cover oh the switch that’s it big daddy
390xp parts
I'm pretty sure that deflector heat shield goes between the engine and the muffler .. Direct cooling fin air flow..
Bought a 385 a couple days ago from a homeowner who only used it 6 times saw is mint with no scratches anywhere so far I really like it
Yes 365-372 xp coil is swappable the 385 390 395 coils have a broader timing curve then the 372, and flywheels I think are the same as well other then im not sure if the base ignition timing is the same or 1 to 2 degrees advanced. Carbs can swap out. Also the 385 cylinder is more saute after then the 390 395 because of the transfer shapes. The plastics im not sure on at all. Again a great video from the Tinman. 👍😎
Thankyou for the info
Is this the blue or the black coil?
They both enter change as well as both have a different ignition timing curve as the 385-395 coils regardless if it's blue or black. The blue coils have a rev limit typically at 13500. Reason some swap coils regardless of the builtin timing curve is they like a higher free rev then most. Also to keep the in cut rpms higher depending on your timing #'s and grade of fuel you use. Compression has a bit in that part as well. Just depending on your build!
@@rncboy2 the 390 is hard to tune with the blue coil. Maybe the free rev limit is lower. I agree that you shouldn’t be turning that thing too fast but it’s just plain hard to tune.
I can send you the part list of the 372 and 385. You can easily figure out similar parts by the part numbers. The small rubber base holding the air filter boot is identical on both models.
Thankyou
Check your mails 🙃
Great saws. My favorite for medium to large wood. Early ones could have issues with clutch side bearing and seal. Check for leaks just in case.
Hello tinman from Ireland, the 372 chainbrake handle is almost identical to the 385 but it won't clear the 385 top cover 👍
I like full wraps as well although I will say sometimes they’re not ideal depending on what your doing.
Nice saw, I just fired my 272xp last night. I was building it from parts in a box. Given to me by a friend. He claimed it was blown up but it was only a sheared flywheel key. Which was molded into the flywheel. The clutch is pinning, weak spring I'm thinking. Can it be upgraded? Nice to see old stuff revived. TC Mahalo Tinman 🤙🤙🤙
385 and 390 is same chain brake
I bought the 385XP new in Australia. I still have it in near show room condition. It gets treated like a baby. It's a fantastic saw.
U can use husky 390 parts on that 385 ,the muffler and clutch cover will work off 372 👌
Those 385 ported are bad ass compared to the 390
The 385xp is known for bad crank bearings. Maybe a good idea to replace them
Oh ya gas and oil cap
You need to reach out to iron horse. He know what you need!
Hi the muffler and bracket off 372 work, clutch cover also. I have been using Dukes aftermarket 385 carbs on my 372 builds. They tune good and have had no problems with them. The chain brake handle has to be for a 385 or 390. I have a set of handle plugs I will send you. You can use a 372 xtorq filter holder just gut it and the rubber thing that holds it works on a 372. Let let me know if you want the handle inserts.
That would be great, thank you
@@tinmanssaws I need a mailing address
@@dsteele7244 my email is on my about page. Please feel free to contact me there. Thankyou for your help.
385 with 390 top end would b nasty
Ya know I just p/u my 2nd 288xp. And I was looking at the same saw. But his price for the 385 was way high. So I grabbed the 288xp while I could. And being old and used to always finding parts, I'm getting nervous about 2 series parts but we will have to keep trying. Good luck with the 385. I'm wondering what happened to your 288 farm tech project. My 288 w/ 32 " bar is my go to. Now I've got a running parts saw. 😁See ya soon.
now you must make those new plastic parts looking old so they match that saw.
Hey Tinman, maybe do a short two or three minute video why you pull the recoil when you shut off saws?
That piece of the wrap kit fits on the bottom of the oil tank, 395xp tank is drilled and tapped for it. Doesn't look like your 394 can accommodate it.
It keeps the saw from leaning to recoil side when sitting on the big dawgs.
Ah that makes total sense!! I thought I was missing something!!
First thing, clean the saw.
Hello Tinman how’s the baby doing?👍👍♥️
She's doing great!!
Where do you find parts for vintage homelite chainsaw
And gas tank
I think that metal plate in your 394xp full wrap kit goes on the bottom front of the oil tank to guard it
Need a good cleaning, carb cleaner bath is due.
could have had a tillitson carb...i know some of the 390s did
Muffler from a 372 will fit
How did I miss this video?!
I LOVE my 385. Close on power and a kg lighter than a 395.
I find mine (currently stock) a fraction slower than my friends 660 and 661's but that could be my sharpening skills or as it was definately used before I got it.
Looking forward to watching what you do with yours as intend to warm mine up a little. I really want to out run my Stihl loving friends saws. 😁
I am sure I have read about people fitting 395 carbs on these when modifying them.
😎👍
I have a 288 in the inventory. 385? Alright.
I might b wrong but my buddy had a 385 and I think he put a black coil from a 72 on it and if I remember right it ripped
Bạnh test cưa vào gổ đi
I'd rather run a 385 over the 390
You need to get the jred 920 out and running and do some comparisons with the 385/394. What happened with the echo 590?
920 is on the list for sure.
I rekon a 385 and 394 would cut circles around a good 920.
Be interesting to look at a 910/920/930 comparison. I read they are all similar, but different. Right at the time when jred was being acquisition'd by husky.
I sent you a package twice and it got shipped back to me so if you know away for me to ship them let me know
Can you send me and email. It's on my about page. I'd like to figure out why the packages don't arrive.
@@tinmanssaws I'll try tomorrow it was when covid was hot and heavy but it still should have got to you
Buddy this saw is going to be epic. I just built one and my cuz laid claim to it lol.
What is oem parts????
Original Equipment Manufacture
385XP WERE KNOWN FOR CRANK BEARING ISSUES ,,THATS WHY THEY WERE DISCONTINUED AS FAR AS I KNOW
Yep. Bigger bearings then bigger head piston to a 390.
G'day Steve, there not that popular in Oz 👍.
Just ask Donny He will know
You can't polish a turd, Beavis!
Awesome vibes 😎 brother 🙌
You inspired me to start a channel! Check ✔️ it out if you have time!
Congratulations on the baby