Thanks a lot for the video. I got a replacement power supply by chance from a flea market today for a console I needed to test out, but it turned out blown. I was quite disappointed, but thankfully I have some repair skills, and it appears I have the exact same issue. The switchmode chip is cracked and left a nasty burn mark underneath the PCB, taking R202 and the trace on its right along with it. I havent checked the fuse, but given the PSU doesnt react at all when plugged in, I think it's very fair to assume it's gone as well. I had gone the cheap route and it bit me in the ass as it does, but now it's about whether it'd be financially smarter to buy components and repair the PSU or buy a known working one outright
subbed for that amazingly in depth and comprehensive showcase of the PSU. Not only did you fix the problem in yours, you quickly addressed most common faults that others may have ("puffy" 5V cap on min) and offered solutions to solve said problems with little to no problems. Thank you, more of you should exist :)
@@Plan-C Finally done with the repairs and it works just fine again :P Didn't think I had any 1500μF 16V caps laying around, but old PC parts/psu's are perfect! Found several, but I now know I need a new and better soldering bolt. All this machine soldered stuff needs waay more heat than my gas bolt can make. Thanks again though, this means I won't have to buy a used one, or wait for new parts :P
Good job👍 I got an Xbox one PSU to check tomorrow, I’m gonna give the console to a friends son. It didn’t suddenly go off, just didn’t power up after last shut down, so I’m hoping it’s just a few caps.
@@Plan-C It was a fun watch =D Not many XBOX PSU repair vids around either! I didn't know you could get an adapter for the 360 PSU!!! =O I guess it makes sense, is the 360 PSU beefier than the XB1 PSU?
Hi, sorry to bother in an old video, but i saw your notes at 5:33 and you wroted the part "IRFB3306G" which is the faulty (shorted) mosfet i have. Its a common fault? Do i change both mosfets or just the faulty one? I only managed to adquire IRFB3306 which, according to the equivalence table, should work the same. Thanks!
Hi, Thanks for watching. Mosfets do fail pretty commonly in switchmode power supplies. Changing both would probably be more belt and braces as I believe tgey are working in a pair. You could probably get away with just changing the shorter one. I would double check the markings on the shorter mosfet when you remove it as it has been a while and those notes may have related to something else. Probably not. But worth double checking. Best of luck.
dont know if you guys cares but if you're stoned like me during the covid times then you can stream all of the new movies and series on instaflixxer. Been streaming with my gf for the last couple of days xD
hello , i have a power supply that has no problem with the capacitors , they are fine , i've changed them anyway but the power supply doesn't work , when i connect it to the xbox the light goes off , what could be the problem ? it could be the mosfets ? thank you
Thanks for watching. Not sure to be honest. It sounds like you have standby power but not the other rails? Tbh, I was pretty lucky with that one as it was easy to see what had failed lol. They are pretty complicated units. Good luck.
I'm trying to fix up one I got. I replaced the caps and all I'm getting now is orange light then turns off. Does anyone know what could be causing this? I believe it's a resister but idk what kind to buy and how to check.
Hey. No expert but what threw me was that resistor that came off with the cap R806 (shown at 16:06 in the vid) I lost it and had to go scanning pics of the board on Google to find the value lol. If you have lost a resistor or are unsure of the markings, it is amazing what you can find online and blow up to read the values. Best of luck. Let me know if you want a picture of the board.
![[427] How to Repair XBOX Power Supply / How to Fix XBOX Power Supply No Power ON](http://i.ytimg.com/vi/8RqupSMryUg/mqdefault.jpg)
![[427] How to Repair XBOX Power Supply / How to Fix XBOX Power Supply No Power ON](/img/tr.png)
Thanks a lot for the video. I got a replacement power supply by chance from a flea market today for a console I needed to test out, but it turned out blown. I was quite disappointed, but thankfully I have some repair skills, and it appears I have the exact same issue. The switchmode chip is cracked and left a nasty burn mark underneath the PCB, taking R202 and the trace on its right along with it. I havent checked the fuse, but given the PSU doesnt react at all when plugged in, I think it's very fair to assume it's gone as well. I had gone the cheap route and it bit me in the ass as it does, but now it's about whether it'd be financially smarter to buy components and repair the PSU or buy a known working one outright
subbed for that amazingly in depth and comprehensive showcase of the PSU. Not only did you fix the problem in yours, you quickly addressed most common faults that others may have ("puffy" 5V cap on min) and offered solutions to solve said problems with little to no problems. Thank you, more of you should exist :)
Thank You
@@Plan-C Finally done with the repairs and it works just fine again :P
Didn't think I had any 1500μF 16V caps laying around, but old PC parts/psu's are perfect! Found several, but I now know I need a new and better soldering bolt. All this machine soldered stuff needs waay more heat than my gas bolt can make. Thanks again though, this means I won't have to buy a used one, or wait for new parts :P
Nice fix. The PCB was really messed up. That PSU design is a lot more complex than I would have thought. Great work. 👍
Thanks. It must have really gone with a bang! 🤣 Got to try and get back to some good old retro stuff, pandemic permitting...😐
wow, great job, i've been looking for an explanatory video like this for days. thank you very much you got a new subscription.
Thanks
Good job👍
I got an Xbox one PSU to check tomorrow, I’m gonna give the console to a friends son. It didn’t suddenly go off, just didn’t power up after last shut down, so I’m hoping it’s just a few caps.
Many many thanks ❤❤❤
Excellent job!! =D
Thanks!
@@Plan-C It was a fun watch =D Not many XBOX PSU repair vids around either! I didn't know you could get an adapter for the 360 PSU!!! =O I guess it makes sense, is the 360 PSU beefier than the XB1 PSU?
excelent repair
Thanks for watching
Hi, sorry to bother in an old video, but i saw your notes at 5:33 and you wroted the part "IRFB3306G" which is the faulty (shorted) mosfet i have. Its a common fault? Do i change both mosfets or just the faulty one? I only managed to adquire IRFB3306 which, according to the equivalence table, should work the same. Thanks!
Hi, Thanks for watching. Mosfets do fail pretty commonly in switchmode power supplies. Changing both would probably be more belt and braces as I believe tgey are working in a pair. You could probably get away with just changing the shorter one. I would double check the markings on the shorter mosfet when you remove it as it has been a while and those notes may have related to something else. Probably not. But worth double checking. Best of luck.
Another great video.
Thanks mate. Catch up soon I hope.
dont know if you guys cares but if you're stoned like me during the covid times then you can stream all of the new movies and series on instaflixxer. Been streaming with my gf for the last couple of days xD
@Russell Mathias yea, I've been using InstaFlixxer for years myself :D
Cost of repairs?
Maybe £5 in parts. Can't recall exact figure.
@@Plan-C
I mean cost of doing repair
@@GTXnayeem oh, I don't do it for a living just try and fix things if I can lol
Hi great vid! I have one problem I cleaned mine and I noticed that its brown or darkened colored on the motherboard is that ok or what?
Hi, Thanks for watching. Depends where it is. It could just be old flux residue or maybe a resistor running too hot?
Fonte tem 5 volt quando LIGA no aparelho desliga
Mine blew because I kept it on carpet and overtime hair and dust got into it.
My power supply just went today.. I'm hoping it's nothing like this.
What should I do if mine is solid red??
Hi, Sorry not sure about that.
hello , i have a power supply that has no problem with the capacitors , they are fine , i've changed them anyway but the power supply doesn't work , when i connect it to the xbox the light goes off , what could be the problem ? it could be the mosfets ? thank you
Thanks for watching. Not sure to be honest. It sounds like you have standby power but not the other rails? Tbh, I was pretty lucky with that one as it was easy to see what had failed lol. They are pretty complicated units. Good luck.
what is te 12 v output mosfets number
Hi, I didn't make a note of it unfortunatelt and have since sealed it back up a while ago. Sorry.
I replaced the Xbox power supply, comes on now but goes off after 3 seconds, any suggestions
Not sure. Maybe overheating/full of dust or, worst case, bad connections under the CPU?
I'm trying to fix up one I got. I replaced the caps and all I'm getting now is orange light then turns off. Does anyone know what could be causing this? I believe it's a resister but idk what kind to buy and how to check.
Hey. No expert but what threw me was that resistor that came off with the cap R806 (shown at 16:06 in the vid) I lost it and had to go scanning pics of the board on Google to find the value lol. If you have lost a resistor or are unsure of the markings, it is amazing what you can find online and blow up to read the values. Best of luck. Let me know if you want a picture of the board.
How much is 60 quid in dollars..?
About 85
Ok. Thx
AMIGO nso com vc manda quemas fonte Xbox one fet para mim
Subbed!
Tem como fala português
not for amateurs like me...
We are all amateurs lol