Timing My Built Mazdaspeed Motor!
ฝัง
- เผยแพร่เมื่อ 10 ต.ค. 2019
- Hey guys hope you like todays video! Hopefully my built motor will be going back in the car very soon! Be sure to stay tuned!
Follow me on social media!
Instagram: steven_devey
facebook: steven devey - ยานยนต์และพาหนะ
Simple and short. You are the best!
The only one who actually shows how that crank tool works, LEGEND!! Thank you sir
I tried my best! Thanks for the positivity:)
@@StevenDeveyhi i have problem my car is mazda 6 and its spenting about 1litar motor oil at 500km
@@StevenDeveyalso can you help what kinde of tool you can write to me, im going by it
@@StevenDeveymazda 6 1.8 gh ph2 2008_2012 88kw 120ps
@@emirkurtanovic6166 just search Mazdaspeed timing kit
Such an informative video! Thanks for all the details!
Plain and simple great video.
Awesome bro! Always lovin your content
James Handley aye it’s all coming together!
This was a good one! Nice job Steve
Je vais travailler avec vous
Tightening the pulley bolt the right way is a biiittch. Gotta have a special tool to hold the pulley in place, and the torque to degree it 90 is absolutely insane! What I would do.. put it to 75 ft lbs, then mark the bolt with a paint pen at 12 o clock, then use the impact to get it to 3 o clock.. make sure the the hole is lined up with that hole in the timing cover, otherwise your crank position sensor will be off. Has to be exact
craigzilla100 hey thanks for the helpful info. I’m probably going to have to time my engine again!
Yes correct expect for torquing the crank bolt that's TWICE @ 90 DEGREES and yes this is a bitch with out the SST TOOL 205-126 & 205-07202
Awesome awesome reference video. Torque specs on everything would have been the icing on top! But look forward to rest of build man.
C Bo ya brotha sorry I didn’t talk about the specs. I’ll have to do a video explaining the specs that I used
Nice video very thero and clean straight up to the point clean work brow
Thank you very much!
Love your videos, I cant wait to take my engine part, she has leaks.
dude, great video.. i enjoy learning about cars and this is very simple yet very informative. Excellent learning guide
fsflip3111 hey thanks so much for watching! If you have any questions at all feel free to ask. Anything else you would like to learn about?
Dude that looks way easier than i thought!
Crank pulley bolt has to be tightened 75 foot pounds and then a further 90 degrees. If it comes loose on you you’ll most likely destroy the engine. Using an impact and hoping for “good luck” is amateur.
And I guarantee the crank bounced off of the set pin when you use the impact I've done it too many times lol
Thank's for useful instruction.
Nice vid!!!
Easily the best video on timing for this motor, saved my ass!
Big mistake on that crank pulley bolt sir. I learned that lesson the hard way when a friend of mine used an electric impact gun to tighten my crank bolt. It didn't tighten nearly enough! That is a torque to yield bolt and it's used for a very good reason. It's very easy to do and can be done with the engine in the car if need be.
Can you use the transmission to keep the engine from rotating by putting the transmission in gear?
@@jb6574 Yeah but it doesn't work as well as locking it at the flywheel.
Did you remove engine+transmission from top/front of car? If so, did you leave the cat in place? Just about to do the job on a CX7...
Finally 🔥🔥🔥
speed6 king it’s about time right?
Steven Devey yessir
Nice one
Timing belt alignment is so easy on these blocks
Excelente trabajjo
Hey mate great vid, I've just finished rebuilding my 08 cx7 2.3 turbo, I noticed the pin on your vvt sprocket was at about 12 o'clock position, I never marked mine and I've set it to 1-2 o'clock but are getting p0012, wanting to know if you ever had any problems, cheers Dave
Hey I do not know that code off the top of my head I don't know if our engines our different in any way, the plate that I put on top is supposed to lock the cams In a specific spot so if you didn't use the plate than the timing could be off, or you could have slipped timing, please let me know any more info you have and I'll try my best to help
You don't loosen the camshaft sprockets then tension the chain?
Hi Steven, I have a 2018 Mazda 3 2.0 here in Thailand. It has 71K Kilometers [44,100] miles. My timing chain sprocket is needing replacement, [I can't believe this]. I have had a similar problem before where the car had little power going up semi steep hills, it had to be downshifted [auto] sometimes to create enough force to go up the hill. Mazda repaired this under warranty, now we seem to be here again with a worse problem. it needs to accelerate up to 2500 rpm to shift gears. Is this possibly normal? or is there a solution, the cost of replacement seems high and the damage unusual for a low mileage car, we have changed the oil at 20-25K intervals. Would really be thankful for you quick diagnosis and possible solution. Thank you very much!
Can't wait to hear this thing fire up!
25KTF it’s on it’s way! Should I keep a loud exhaust or make it quieter?
@@StevenDevey its gotta be loud at least to start! Send it for a while
25KTF good point! The external wastegate will be out the hood. And it’s loud as it is!
What's the break in period for the timing chain before you can beat on the car
I was told i can damage/crack side cover by holding the crank pulley with the bolt you put through the hole on the pullet to hold it. Maybe a no issue with impact gun
I was told the same thing that’s why i used the impact gun
J'aime beaucoup votre travail et merci pour
Can you recommend a good place to buy the timing chain? I've seen a lot of cheap ones out there. Not sure where to get a good one.
Titaniumman Garage the only place to be sure if the Mazda dealer. I think edge auto sells authentic Mazda timing chains but mazda is a safe bet
Thanks.
Where did you buy your timing kit parts? What’s the part number? Thank you.
The weird method your talking about is using a angle torque gauge with a breaker bar ( 1st the brand new crankshaft bolt pn LF01-11-406 ) is to be torqued to 70.9 -76.7 ft/lbs then TWICE to 87 -93 DEGREES this is stretching / pre-loading the bolt that's why your supposed to replace , if you did not do this it's wrong !
Mr Fix It you are correct sir.
Sorry to correct you but cams do not go at TDC the piston does and the cams in cylinder 1 better be at the base of the lobe on intake cam and exhausts cam then you install the plate to hold the calls while you install the timing chain, also the cam sprocket should have a dot and the VVT should have a notch and both should be at position 12 o'clock before installing the chain , FYI
TYPO i meant to say hold the cams
On this engine - can you drop the oil pan easily while engine is in the car? It looks like some of the timing cover bolts goes sideways into pan - is this correct? I need to check for rod knock.
If you want to keep the timing cover on, you'll have to slide the transmission over about 0.2 inches to give the oil pan some clearance. Otherwise, it's jammed in place on both sides.
👍👍👍
Is very cool
dude i cant believe its almost done
paok paok I know right! I’ve got the tranny off the stock engine too!
Do you have a link to these parts and tools mister?
I have a question, I can see how to line up the cams, thanks for that helpful information. However, on my engine(which happens to be in a range rover evoke, but it appears to be the exact same engine which I think is a Ford engine) the cam sprockets are not keywayed. Does this mean the cam sprockets can go on any way? If there are alignment marks for the cam sprockets, please tell me what the line-up is for them? Thanks!
I’m not exactly sure on a Range Rover. I would look for a manual on the exact engine but I would think they need to be lined up somehow
Thanks I'll have to get that manual
Nice one I wish am there with you am a mechanic
Where do you buy your friction washers, I can’t find them damn things anywhere
Straight from Mazda
Literally been looking for a speed 6 for close to a year now, had an 06 v6 6 speed that my brother completely destroyed when I gave it to him when he was I need, fan of the speed 3s but not wanting one, so hard finding a stock one here in NC, there’s a few but are complete junk and been messed with way to much for me to be comfortable with buying, gonna keep searching a couple states away
YumYum Or Ginger hey dude sorry it’s been tough finding a speed! How do you think the V6 compares to the mazdaspeed turbo?
Steven Devey never had the opportunity in sitting in a mazdaspeed but man for being my second car and previously owning a chevy tracker It felt like a rocket ship, had so much fun with that car but unfortunately it’s sitting in my yard with so much wrong with it it’s not even worth putting money into, may even pick up another one
YumYum Or Ginger oh dude I need to check out the v6 than. You have to get a mazdaspeed next. I’m confident it will be way better than the mazda 6.
Yeah it’s worth it in my opinion but I’ve never really sat behind any other quicker cars, could always keep up though, weird tho all trim levels have 140 on dash but when I bought mine used it has 160 even the forums think I’m lying lol
YumYum Or Ginger ya I feel brotha. Come to town and I’ll give you a ride. Speeds are so underrated
Good job! Honestly the proper torque procedure on the crank bolt is pretty important especially since yours isn't keyed and you are relying on friction. I hope you change your mind and torque it properly. 75 FT-LBs + 90 degrees is a torque to yield procedure and is probably close to 300ft-lbs on that size bolt. You would be fine with a M18 fuel 1/2" impact, but you probably didn't get close to that value with the gun you used.
You didn't use any sealant on the timing cover?
No, I definitely used a lot of sealant
Cool video, what's the specs on the engine, is it a petrol or diesel ?
It’s gasoline, 2.3l turbo
@@StevenDevey oh i wish mine had that engine :-D but i suppose the 2.2 diesel has a simillar principle used for the engine timing. Btw. I think that engineers who decide that non keyed crankshafts are to be used should be coated with tar and feathers and forced to run through town squares ... it's simply criminal
@@domagojgotic4421 I know how you feel but they end up working pretty well. People don’t like them cause they done believe they will hold but they have held on similar builds as mine up to 700hp
@@StevenDevey That's true. I do like how you have shown the usage of camshaft and crankshaft locking tools, that will come in handy one day.
Thanks
how do you align the camshaft? since you can flip it over 2 ways?
The slots in the camshafts are not centered. they are slightly above
Think bro
I had no idea how easy timing a speed engine was
Dominicano_Jay yes it is quite easy. It makes it harder when the engine is in the car.
Thanks for Teaching me...
I made the mistake of using an impact to tighten crank pulley on a eco boost today.. 5 miles down the road pulley comes loose and a full day wasted on setting timing once again.
That’s why I make sure to use torque limiting extensions to make sure that the bolt is properly tightened to the foot pounds I need, and then do a 90° turn as per the instructions. Those extensions work magic and theyve been proven to work and tested by people with a torque wrench :)
Can you reuse the stock timing parts?
i would not because of the stretch and your cam timing could be off a few degrees witch would turn on your engine light P0012 which the VVT would give the pcm wrong info and retard the VVT timing
I would HIGHLY recommend torquing that crank bolt.
I made a wrench that holds it in place I can let you barrow if you want.
Look at it this way, how much money do you have wrapped up into this engine so far?
Is it worth throwing all that money away because you didnt torque a bolt?
If you had the crank keyed then yeah, no biggie but those washers are the only things keeping your engine from becoming scrap.
broncomitch I feel ya brotha. Don’t worry it’s torqued down pretty tight! Probably 100 ft/lbs!
Torquing the nut 90 degrees, my digital torque wrench got up to 284 ft lbs.
One thing I learned rebuilding mine was every single time you cheap out or half ass something it bites you in the butt.
broncomitch oh for sure. Building an engine isn’t cheap. Does my timing look in order?
@@StevenDevey only thing you didn't do was set the chain tension. It's not super critical but dose make a difference.
Make sure your vvt is good, I thought mine was and it turned out to be bad so had to change it in the car.
Where you get your torque specs at?
Two Bunz my boy Jordan maxwell hooked me up on specs
i have them all THEY ARE NOT EASY TO GET
What kind of impact wrench did you use?
Kevin J I used an electric impact. I would recommend using a torque wrench though. I ended up having to redo my timing
@@StevenDevey Ahh alright then
@@StevenDevey why did you have to redo your timing?
MS3 VERYTHING I torqued it down with an impact gun but didn’t mark how far I turned the crank bolt. It might have been alright but I ended up torquing it down with the same impact just for longer, 90 degrees to be exact.
Really ?
Please I want the engine to buy
Timming fusión EcoBoost 2.0 turbo
DO NOT USE A IMPACT WRENCH ON THE CRABK BOLT FFS. you tighten it to 71 ft lbs then another 90 degrees. watching him blast that bolt in while holding only a cam made me cringe so hard i shit my pants. You litterally put over 200ft lbs of pulsating torque on the peuny timing cover bolt not to mention timing chain/ dry cam journals pressing into a cam that wants to angle, mushrooming the tdc pin and running the risk of breaking the end of the cam off where the timing plate has been. YOU SHOULD HOLD THE CRANK FROM THE OTHER SIDE WITH 2 BOLTS AND A BAR WHERE THE FLYWHEEL BOLTS IN TO JAM IT IF YOU DONT HAVE A FLYWHEEL HOLDER. You didnt mention the crank sensor which is part of the timing prosses.
this is a interference motor with NO key ways what so ever so if one of thoes friction washers slip because it was not tightened properly (VERY COMMON) or reuse a old one the valves fall into the pistons taking the whole motor and turbo out. but hey if it worked for other people then who cares amiright or amiright. people who think they need to follow proper instruction or how you put it "some weird method" are morons.
i really hate talking to someone like that its disrespectful but this is something someone may follow and potentially ruin there motor due to it.
ryguy 762 so you are saying it won’t work or I shouldn’t have done this?
@@StevenDevey it will work its just safer to do it the way he told you to since theres a chance to break something doing it this way
No way the shit is that easy!!
No lube needed?
LexR45 I didn’t lube anything. When I start the engine I’ll put oil on the cams!
when you put the crank sprocket on I hope you had the hole pointing down and your 20 teeth over from the open tooth
I have prblum ford mustang GT timming prblum 4salnder Trbu
Could not see cam placement on timing tool
Sorry but the plate only goes one way it doesn't matter the cam placement because the plate only goes one way
Hello I have a Mazda engine that have a timing problem
Donc ces genres de moteurs n'ont pas la clavette
Hi
🇸🇦👍
Yo
aoiry xxs aye!
it`s near impossible to tighten the front crank pulley bolt up as specified by Mazda , I nether got mine to the correct 90% and I had a big tube on it and it was lifting the engine out, pluse ste it a good idea to get rid of the the pipe that run`s from the pcv valve to the inlet manifold [block the inlet manifold off] and run the union fitting or remove the ball from the pcv valve and rubber pipe it up so it is open all the time, and run a pipe to atmosphere or a catch tank high up [ THE PCV VALVE IS CAUSE OF MOST MAZDA`S SMOKING ON IDLE ] .ste did you know that there is new vvt sprocket for the Mazda's, it`s been out about 4yr ? .it`s got a stronger pin inside it as the old one use to brake up inside the gear . atb john
GIBBOJ / JOHN hey dude is the new VVT a revision by mazda? I have a brand new oem vvt sprocket that I put on my cam before hand. Is this what you are talking about?
GIBBOJ / JOHN also what is the best set up for the PCV plate? I’m interesting I’m deleting the hose that goes from my intake manifold to the PCV.
hi ste if the vvt was oem/ Mazda bought recently I would have though it should be the latest update by Mazda to solve the pin problem
GIBBOJ / JOHN ok good. I used brand new oem parts for the entire timing! Thanks for watching out for me! Does my timing look in order?
hi ste the set up im using is the std pcv plate with the steel ball and spring took out of the std pcv valve [straight though ] iv packed some stainless steel pan cleaners in the top of the block / pcv plate to act as a baffle to keep oil from getting out , it seem`s a bit extream but the pan cleaner`s can not fall anywear due to tiny gap`s in this area .a run a rubber hose 15mm / 9/32 id [compatible with oil ] from the pcv to a oil catch can / tin / breather filter /atmosphere as heigh up as you can get it [ as if it does blow out oil it will drain back through the pcv , [blow down the pipe to make sure it will vent air ] iv run mine into a homemade catch tank with a breather filter on it , it`s only done 1000ml from the rebuild but no oil in the catch tank as yet ,but a bit of smoke through the breather filter as the piston ring`s have not bedded in yet ? if it does carry on smoking a bit ill run a rubber hose into the airfilter box / hose and loose the breather filter , but it`s not a issue yet . hope this help`s ATB FROM THE UK / JOHN
Did you have to re do this
So far my timing has been ok but I did redo my cam gears
@@StevenDevey I probably will have to redo cam gears
I followed your video :/ but I did everything else right so I don’t think the valves bent
@@StevenDevey what happened to your built engine?
@@TokijiHorie my engine ran good but I haven’t put tons of miles on it yet. Did you slip timing or what happened to yours?
Tu n'a présente les position de l'arbre à cane
Je suis un mécanicien j'ai un nouveau rencontrer
Hello sir, I’m a mechanic and I’m very interested with your video
Is it ok? if I recap your video ,explaination with Thai language and Thai subtitle in my channel to be knowledge for Thai people who’s interested with the content like this.
It looks like a very weak engine, the chain is too light.
Expliquer en francais
Your skill is wrong
Donc ces genres de moteurs n'ont pas la clavette