My Mazda CX-7, 2.5 four cylinder, South Africa, has now 340,000km on the clock. I am only now going to replace timing chain. No really necessary, but I think this is safe. Only replaced the fan belt since I bought it new end of 2010. Excellent vehicle!!!!😃
There is quite a lot cases of timing belt breaking the motor on CX-7. Does replacing it before gonna prevent the problem on a car with 60000km? Thanks for the answer
Hi I replaced my serpentine belt and oil pan gasket on my 2007 mazda cx 7. After that it wont start, their is crank but no start. It was running good before I replaced the serpentine and oil pan gasket. I did compression test 3 of the piston reads 100, 115,125. Piston number 1 is 175psi. All fuses are good fuel pump and injectors are good. Do you think the timing affected by replacing serpentine belt? My car only has 120k miles. Your response is appreciated. Thanks
I just bought a dirt cheap 2009 cx7 with 273k miles. Guy said it had never been replaced in his ownership and he bought it at 90k miles. Definitely planning on doing it soon!
As usual awesome video, so thanks a million. Do you recon the procedure is the same for Mazda 2 DE 2009? I have currently done 143000 miles in the UK and I am intending to do timing chains and oil pump replacement as a precautionary measure.
Hey guys great video, im attempting to do this on my 2011 mazdaspeed 3 next month and im using this video for guidance, if you guys have any other videos available that will help me please 🙏 send them to me
I have a 2007 cx7 I keep getting code for piston 4 miss fire. Last time I look it out it was making a clicking sound in the engine then I accelerated. Do u know what it can be?
Can you help me i want to know if the 2007 cx7 2.3 turbo and the 2008 use the same engine wiring harness mine is damage and i need to replace it and i want to know if the match thanks
I have a question for you guys my Mazda, CX seven has an issue where I’m getting one spark one pulse but that’s it. It will not start. It turns over I seem to lost power or somewhere but I don’t know where could you help a brother out?
Hi y'all 👋 hey chain was recently done by someone else but they didn't seal it up properly so I'm pulling side cover and resealing everything properly. I did valve cover gasket few months ago do I have to pull the valve cover again to just do the side cover?? Pls and thx I know as I'm taking it apart I'll figure it out but I just was trying to run it through my head first
Wow great video. How much do you think a job like this would cost? I have a 2007 Mazda cx 7 with 81,000 miles and think maybe it is time to get a new chain to prevent a failure.
@@LibsareTRASH we put a new oil filter/ cooler and it stopped the leaks. At 100k now but this Mazda is really the biggest cheaply build piece of crap we have ever owned. Gonna run it to death tho. Horrible uncomfortable car but it's cool to park anywhere and not give a damn what happens to it 😂😂
Tbh I love mine lol. Got it for $320 at auction and that was 2 years ago I've only put a valve cover gasket and oil changes no other issues. I too will be driving mine into the ground haha!
The shop told me it would cost more than the car is worth. I went on eBay and got all the parts for about 250$. I’m going to do the job with almost no power tools too. Wish me luck.
Hi guys. Can you help me to fox my car belt tensioner? When i trying to change the belt tensioner, the upper screw is broken. Can you tell me how to remove the rest of screw or bolt pert from engine? Or how to fix my problem? Please let me know as soon as possible. Thank you.
Hi, I love your videos, they are great! Would you please be able to kindly assist in sending me your link re repairing a Mazda CX7, 2008 2.3 litre turbo Timing chain kit replacement? Do you also have a detailed video re replacing the A/C Compressor and Condenser kit in the above mentioned Mazda CX7, 2008 2.3 litre turbo? Thank you very much in advance!
Hi gays grettins from Monterrey México, I SEE all yours vídeos, I need You help, I need replace the retainer ir the cober the crankshaft one's Mazda cx7 2.3 L 2008 I hope for you comment abaut. Sorry for My English write.see You and meny grettins for you.
Products that we use and recommend:
► Timing Chain Kit: amzn.to/2PMNEwd
► Timing Tool: amzn.to/2Mkt3NH
► Engine Sealant: amzn.to/2oKQOpp
► Front Crankshaft Seal: amzn.to/34MyVWg
► Dewalt Air Compressor: amzn.to/2nVApOq
► Impact Wrench: amzn.to/2nVAOjU
► Panel Removal Set: amzn.to/3YiMADu
► Assorted Fuses: amzn.to/4fx4s3F
► Tool Set: amzn.to/3p5MM6t
► Screwdriver Set: amzn.to/3XRB28Q
► Castrol Oil: amzn.to/3xBc8B9
► Oil Filter: amzn.to/3w0Ulme
► Torque Wrench: amzn.to/32qyRwg
► Liqui Moly Engine Flush: amzn.to/3IiDBID
► OBD Scanner that we use most often: amzn.to/3I4MQfe
► Check out our Amazon Store for the tools and parts that we use: www.amazon.com/shop/worldmechanics
My Mazda CX-7, 2.5 four cylinder, South Africa, has now 340,000km on the clock. I am only now going to replace timing chain. No really necessary, but I think this is safe. Only replaced the fan belt since I bought it new end of 2010. Excellent vehicle!!!!😃
very good video . . good thing I checked it . . . you saved me from messing this job up . . .
Appreciate the video! It's great that you had that spare engine to reference! Thanks
There is quite a lot cases of timing belt breaking the motor on CX-7. Does replacing it before gonna prevent the problem on a car with 60000km? Thanks for the answer
The oil pump chain comes off without having to remove the sprocket.you only need to remove the tensioner arm to do so.
Great insight into what is involved!! Thanks
Hi I replaced my serpentine belt and oil pan gasket on my 2007 mazda cx 7. After that it wont start, their is crank but no start. It was running good before I replaced the serpentine and oil pan gasket. I did compression test 3 of the piston reads 100, 115,125. Piston number 1 is 175psi. All fuses are good fuel pump and injectors are good. Do you think the timing affected by replacing serpentine belt? My car only has 120k miles. Your response is appreciated. Thanks
Where is part 2 installation? Thanks good video
at 13:30 the little metal cap piece fell out. Same thing happened to me. How do you replace it or reassemble it?
R&r timing phazer sprocket
Thanks buddy for this video. Keep up with the good work.
Excellent video explanation Thank you very much man
A lot of good information and great camera work to show it. At how many miles/kms should these chains be replaced at?
Around 100,000 miles. Mine failed at 140,000 some go longer some not so long
Long as you do serivce change oil on time they should last you all they life mate
mine failed around 214000 CHECK your service manual!! :D
I just bought a dirt cheap 2009 cx7 with 273k miles. Guy said it had never been replaced in his ownership and he bought it at 90k miles. Definitely planning on doing it soon!
im getting mine replaced now at 120,000mi
So question what’s the need to remove and replace the top dead center pin and what’s the difference from the old to the new one?
As usual awesome video, so thanks a million.
Do you recon the procedure is the same for Mazda 2 DE 2009?
I have currently done 143000 miles in the UK and I am intending to do timing chains and oil pump replacement as a precautionary measure.
Hey guys great video, im attempting to do this on my 2011 mazdaspeed 3 next month and im using this video for guidance, if you guys have any other videos available that will help me please 🙏 send them to me
How’d it go? Doing it on my speed 6 pretty soon here. Any tips?
@@kurtisvanwezel8303 he never replied so that means No lol
Looking for part 2 and can’t find it. Doing this on mine this weekend, and would like to see how to put it all back.
Do you have a video on how to replace the head gasket on this engine?
I have a 2007 cx7 I keep getting code for piston 4 miss fire. Last time I look it out it was making a clicking sound in the engine then I accelerated. Do u know what it can be?
how do you get the tdc pin in ?
What does the sound make when a cam bearing on a Mazda 2.3
Can you help me i want to know if the 2007 cx7 2.3 turbo and the 2008 use the same engine wiring harness mine is damage and i need to replace it and i want to know if the match thanks
Quand faut-il changer le kit chaîne de distribution à combien de kilomètres ?
I have a question for you guys my Mazda, CX seven has an issue where I’m getting one spark one pulse but that’s it. It will not start. It turns over I seem to lost power or somewhere but I don’t know where could you help a brother out?
Hi y'all 👋 hey chain was recently done by someone else but they didn't seal it up properly so I'm pulling side cover and resealing everything properly. I did valve cover gasket few months ago do I have to pull the valve cover again to just do the side cover?? Pls and thx I know as I'm taking it apart I'll figure it out but I just was trying to run it through my head first
Wow great video. How much do you think a job like this would cost? I have a 2007 Mazda cx 7 with 81,000 miles and think maybe it is time to get a new chain to prevent a failure.
Hope you didn't waste your money. Mines at 196k all original no codes no rattles drives like new
@@LibsareTRASH we put a new oil filter/ cooler and it stopped the leaks. At 100k now but this Mazda is really the biggest cheaply build piece of crap we have ever owned. Gonna run it to death tho. Horrible uncomfortable car but it's cool to park anywhere and not give a damn what happens to it 😂😂
Tbh I love mine lol. Got it for $320 at auction and that was 2 years ago I've only put a valve cover gasket and oil changes no other issues. I too will be driving mine into the ground haha!
The shop told me it would cost more than the car is worth. I went on eBay and got all the parts for about 250$. I’m going to do the job with almost no power tools too. Wish me luck.
@@Bearohazard how did it go?
Hi guys. Can you help me to fox my car belt tensioner? When i trying to change the belt tensioner, the upper screw is broken. Can you tell me how to remove the rest of screw or bolt pert from engine? Or how to fix my problem? Please let me know as soon as possible. Thank you.
Hi, I love your videos, they are great! Would you please be able to kindly assist in sending me your link re repairing a Mazda CX7, 2008 2.3 litre turbo Timing chain kit replacement?
Do you also have a detailed video re replacing the A/C Compressor and Condenser kit in the above mentioned Mazda CX7, 2008 2.3 litre turbo?
Thank you very much in advance!
Can we get a video showing how to remove engine from a CX7 AWD... maybe with and without the transmission would be really interesting.
Nice job
After seing this, selling off my cx-7.... 😂
Can you make vids of mazda2 Demio 2008 hacthback engine timing and other fixes? Plz
Why are you replacing the timing chain? What were the symptoms?
Do I have to replace the oil pump chain to be able to replace the timing chain?
no :D
How many miles do you recommend change the timing chain and turbo charger and VVT?
Thanks
70k if you already dont have problems. short drives kill this type of engine turbo setup. change the cat and o2 sensors too while the turbo is out.
kit will fit 2006 Mazda 5, 2.3??
Hey nice work but I need to know where dose the lock washer go on a timing chain
what lock washer? the friction washers?
Hi I have Mazda MPV 2.3t with 145000km when should I replace the chain
Iam having a problem with my car which is Mazda model:mpv ,engine L3,I want a good second hand engine,do you people have them?
This doesn’t work for the german layout/2.2l of the engine it’s quite different. Neither the sensor nor the pin position is the same.
So... Part 2? Or do I keep missing it?
Do u hv branches East london. I want to bring my car
Do chain job on mazda t2 mate plz thankyou
How do I get. Masda cx7 good mechanic in Nigeria please help m with the contact.
Don't see the tools to hold cams or for tdc
Yo, I noticed that when replacing my vvt phaser, the crank tdc bolt and the fixture for the camshaft are included
Привет как часто нужно менять?
80,000 - 120,000 miles. I don’t know in kilometers
The upgraded chain and cog package from 2012 is much better
Si ala madre de los anuncios 6 anuncios corridos para ver un video
Hi gays grettins from Monterrey México, I SEE all yours vídeos, I need You help, I need replace the retainer ir the cober the crankshaft one's Mazda cx7 2.3 L 2008 I hope for you comment abaut. Sorry for My English write.see You and meny grettins for you.
Most people tell me to get oem not aftermarket
NOICE
😊
Starting to seriously question this guys aptitude by the way he was leveraging that breaker bar on the mount lol
That was cringe worthy indeed.
remove lifter without move timing chan2005 mazda tribute2.3 liter
Je n'arrive pas a comprendre l'explication parlez français ausi
I bet this car still don’t work all these videos 😂😂
хахаха , гледам някой носи мартеници :)
You could do with better editing. Cut out some of the dead time. For instance, you need not show every turn of every bolt.
Way to much random talking. Jezz
You talk too much!