*IF YOU DO NOT HAVE A SOLDERING IRON* *DISCLAIMER:* *READ THIS ALL OF THE WAY THROUGH AND MAKE SURE YOU UNDERSTAND BEFORE ATTEMPTING!* Cut the red and black plug cord off from the battery halfway down the black and red cords, then strip them down 1/4th to the wires, and then take a usb type A cable, strip the cord 1/3rd til you get to the red and black smaller cords inside of that, strip both of those 1/4th to the wires, and then combine the red usb cord wire to the red battery plug wire, and then combine the black usb cord wire to the black battery plug wire(Please cover the combined wires with electrical tape after your done if you have it) After this just plug your newly made USB plug cable straight into the motherboard where the battery used to be plugged in(Now instead of plugging a battery into the motherboard, in its place should be the half of a USB cable that plugs into your playstation) also remember to find a way for the cable to exit the controller when you put it back together.
I thought the same too, i want to do it too, but instead of connecting the cable to the battery I want to connect it directly removing the micro usb port and soldering the cable there, but i can't find any goot tutorial
Super useful! My battery was exhausted so for over a year now I’ve just kept the controller plugged into a power bank to keep it somewhat wireless but that doesn’t even work now. Thanks to the encouragement and direction of this video I went for it and it’s working. Only difference was I snipped my battery cables close to the battery and spliced into those to use the battery’s connector
O cabo da conexão só fornece energia, certo? Aqui só tô usando ele por Bluetooth, ou seja, conecto esse cabo da gambiarra numa entrada USB e pareio ele por Bluetooth por exemplo no meu celular. O problema é que pra conectar de volta no ps4 não tem como ser direto por Bluetooth, tem que antes conectar ele diretamente por cabo (pela entrada natural do controle). Tô com medo de conectar o USB pra fornecer energia e o USB pra parear com o ps4 e dar algum tipo de curto circuito. Você já testou fazer algo assim, ou alguma outra maneira de conectar no ps4?
loose USB. , Cant charge and cant connect using it, and buying a new usb board to replace too expensive here, and taking the battery out and in everytime to charge is too troublesome too
hello brother when i didn't no somethings about how volts work i used to charge my ps4 controller on a mobile charger and it stopped working , do you think that can be fixed or i shoud do what you did to your controller please help me , it isn't working now
i changed the battery but when ever i turn it on it will turn of immediately and with that a red light appear on the light bar' sorry for my english do you still have the controller is it working ?
have you thought about turning it into a diy arcade stick XD im thinking of doing so,i bought diy kit but its like raspberry pi it wont work on ps4 so i need original controller :/
Hey, thanks for the upload. Is there a reason you didn't solder the cable into the external connector? You know, the USB Micro B connector that is already there on the outside of the controller?
If you get a Loose USB board, my method sti works, if your usb board is ok what you said works too, but then the controller will be legit wired, my method keeps it like a "wireless with infinite battery" as keeps feedin from the source
Thank you buddy, I changed my controller to wired as in the video and it keeps disconnecting from the ps4.(I used a long wire about 5 meters) is it possible that because it became outside the range of the Bluetooth of the ps4
You think same could be done for ps3 controller? Have you noticed lower latency? The Bluetooth antenna is still there. I use ps2 controller on PS4 for that reason but great video!
Uuuh which version of the dualshock 2 do you use? Or u modded it?, Btw yeah if it have a power suply with the same "characteristics" as the PS4 definitely works but better to check if the PS3 USB Ports and the cable is 3.0 or lower to make sure nothun happens to the board or the Ports itself
The Commands have no input lag whatsoever, but in other side if you format the PS4 you gonna need either a keyboard or another controler or a PS4 Remote Play app to find the controlelr again cuz he still being detected as a "wireless" input the board just being feed by the power from the port
@@Thiagosldark DualShock 2 from ps2 era but with Bliss-box adapter. You can use brook adapter also or watch gunpala ps2 to switch adapter But if you mainly use PS4 use brook ps2 to ps3/ps4
Pretty useful! I want it to be more useful though. If I were to solder the USB connection onto the battery instead of removing it, could it work and charge that way as well?
Omg this is super helpful! I play fps games on my ps4 then switching back and forth pc and ps4, and tried ps4 wired and it looses connection and i dontblike using a xbox controller. So this helps so much
I was wondering the left and right thumb sticks is there a way to open the controller up and make the control think the left one is right and the right one is left so basically swap them about
This did work for me but when i tried to connect the wired controller to a different ps4, it would not connect but stay connected to the previous ps4? Anybody know what im doing wrong?
*IF YOU DO NOT HAVE A SOLDERING IRON*
*DISCLAIMER:* *READ THIS ALL OF THE WAY THROUGH AND MAKE SURE YOU UNDERSTAND BEFORE ATTEMPTING!*
Cut the red and black plug cord off from the battery halfway down the black and red cords, then strip them down 1/4th to the wires, and then take a usb type A cable, strip the cord 1/3rd til you get to the red and black smaller cords inside of that, strip both of those 1/4th to the wires, and then combine the red usb cord wire to the red battery plug wire, and then combine the black usb cord wire to the black battery plug wire(Please cover the combined wires with electrical tape after your done if you have it) After this just plug your newly made USB plug cable straight into the motherboard where the battery used to be plugged in(Now instead of plugging a battery into the motherboard, in its place should be the half of a USB cable that plugs into your playstation) also remember to find a way for the cable to exit the controller when you put it back together.
youre a legend for explaining this to people
awesome i will pint your message to help everyone!
If i remover the battery dirrct connect a usb cable positive and negative, the controller does not turn on not unless i jump the battery with it
I don’t have electrical tape lmao what’s else can I use
2:26 thats some quality craftsmanship there 😂 great vid tho thx for the help
Glad you enjoyed it
its not wired , its powered , still bluetooth
I thought the same too, i want to do it too, but instead of connecting the cable to the battery I want to connect it directly removing the micro usb port and soldering the cable there, but i can't find any goot tutorial
Do you happen to know a good tutorial here on youtube or on reddit maybe?
@@gabrielepjetra1209 change it to type c
Just super glue the cord in after you plug it in. Voila.
Super useful!
My battery was exhausted so for over a year now I’ve just kept the controller plugged into a power bank to keep it somewhat wireless but that doesn’t even work now.
Thanks to the encouragement and direction of this video I went for it and it’s working. Only difference was I snipped my battery cables close to the battery and spliced into those to use the battery’s connector
Can you please find a way to bypass the bluetooth because my bluetooth doesnt work in my dumb ps4
Same
I recommend getting a MicroUSB data cable and an OTG cable.
@@xlucqd_ wow but how to connect it to ps4 im confused
You can use it wired but you'll need you're DS4's charging cable
@@xlucqd_ i know but how do you connect it...when i plug it in it has to sync with bluetooth first then i can change to usb
Thanks for sharing this coz those micro ports are killing me
Yw thats all i been doing everytime something happenss lol
cheers from brazil, helped a lot bro
I am from brazil aswell but Glad it helped 💪
Po aí sim, tô com umas dúvidas aqui, tem como me ajudar?
O cabo da conexão só fornece energia, certo? Aqui só tô usando ele por Bluetooth, ou seja, conecto esse cabo da gambiarra numa entrada USB e pareio ele por Bluetooth por exemplo no meu celular. O problema é que pra conectar de volta no ps4 não tem como ser direto por Bluetooth, tem que antes conectar ele diretamente por cabo (pela entrada natural do controle). Tô com medo de conectar o USB pra fornecer energia e o USB pra parear com o ps4 e dar algum tipo de curto circuito. Você já testou fazer algo assim, ou alguma outra maneira de conectar no ps4?
@@Yan-tl5pv manda
Thank You
you helped me A LOT, I'm from Brazil
why? why didnt you just use the connector from the battery? also, why didnt you use the usb port on he controller?
loose USB. , Cant charge and cant connect using it, and buying a new usb board to replace too expensive here, and taking the battery out and in everytime to charge is too troublesome too
@@Thiagosldark Why didnt you just cut the battery connector and attach the red with red and black with black and avoid the solder on the board?
@@halfast lol I was wondering the EXACT same thing!
@@halfast cuz the battery still working fine i might use in other stuff
J how do I do that my battery had got some water on it and now it won’t work and I don’t got any money so how do I make it usb
Nice tutorial dude 👏🏻👏🏻
Tyyy 👨🎓
bro I connected as you did now it power on but it's not recognized on pc it is working Bluetooth only
swap the connector onto the usb board one instead
hello brother when i didn't no somethings about how volts work i used to charge my ps4 controller on a mobile charger and it stopped working ,
do you think that can be fixed or i shoud do what you did to your controller
please help me , it isn't working now
The battery is probably dead, either buy new battery or do the thing thats on the video
i changed the battery but when ever i turn it on it will turn of immediately and with that a red light appear on the light bar'
sorry for my english
do you still have the controller is it working ?
Could u just cut the battery wire and use that adapter on the end
yeah it would work too
I tried that but no power is coming in and yes i connect the right polarity.
Is it still working? Did you use any resistor because I think the battery is 3.7v while you used 5v wired usb.
Yeah it still works, and nope i made direct into the usb and no problems so far all this years
Nice , good luck in your channel
have you thought about turning it into a diy arcade stick XD im thinking of doing so,i bought diy kit but its like raspberry pi it wont work on ps4 so i need original controller :/
Uuu i havent thats a good one to rework the controller, I'll check on internet about it XD ty for d idea
@@Thiagosldark i bought the buttons and the box from aliexpress but i doubt thats a good idea now, maybe wish or banggood, came about 45 usd
Hey, thanks for the upload. Is there a reason you didn't solder the cable into the external connector? You know, the USB Micro B connector that is already there on the outside of the controller?
If you get a Loose USB board, my method sti works, if your usb board is ok what you said works too, but then the controller will be legit wired, my method keeps it like a "wireless with infinite battery" as keeps feedin from the source
Thank you buddy, I changed my controller to wired as in the video and it keeps disconnecting from the ps4.(I used a long wire about 5 meters) is it possible that because it became outside the range of the Bluetooth of the ps4
great mine still works to this day!
yeah but if you're gonna use it on PS5 or PC, you gotta use the data wires im sure.
ywep
Mine broke off is the still a way to do this
You think same could be done for ps3 controller? Have you noticed lower latency? The Bluetooth antenna is still there. I use ps2 controller on PS4 for that reason but great video!
Uuuh which version of the dualshock 2 do you use? Or u modded it?, Btw yeah if it have a power suply with the same "characteristics" as the PS4 definitely works but better to check if the PS3 USB Ports and the cable is 3.0 or lower to make sure nothun happens to the board or the Ports itself
The Commands have no input lag whatsoever, but in other side if you format the PS4 you gonna need either a keyboard or another controler or a PS4 Remote Play app to find the controlelr again cuz he still being detected as a "wireless" input the board just being feed by the power from the port
@@Thiagosldark DualShock 2 from ps2 era but with Bliss-box adapter. You can use brook adapter also or watch gunpala ps2 to switch adapter
But if you mainly use PS4 use brook ps2 to ps3/ps4
does it connect with bluetoth still? i want to make it wired to pc
yeah it works as bluetooth still if u want it fully wired you need to swap the usb board connectors into the cable
Amazing so much help thankyou
You welcome , sub for more and thanks 💪👽
Pretty useful! I want it to be more useful though. If I were to solder the USB connection onto the battery instead of removing it, could it work and charge that way as well?
It might work but i believe if wrong done can damage the battery life or even controller as it will be always receiving nonstop charge
@@Thiagosldark could voltage be a problem too since the battery is rated 3.7 which is lower than USBs 5?
Omg this is super helpful! I play fps games on my ps4 then switching back and forth pc and ps4, and tried ps4 wired and it looses connection and i dontblike using a xbox controller. So this helps so much
shoul of just charged from bottom ext connection. thats not wired controller thats bluetooth with wired power source but no data
Does the headphone work if u do that tho cause after I did that no headphone work
Yeah mine works
Thanks mate 🖒super useful 😆👍
if you use the controller for your pc, don’t do this. windows won’t recognize it unless you connect it with bluetooth
yeah for PC use you would need do the soldering direct into the USB board port, or the pc must have a bluetooth to use this method i posted
Is it working on pc ?
Yeah
it only works if you have bluetooth on your pc. if not the controller will turn on & it will not recognize it
Didn't work with me wtf ☹️💔
2:35 ص 8 ديسمبر 2023 .
isn't it easier to go to controller settings and select wired controller? 🤔
Nope if u have broken usb
I was wondering the left and right thumb sticks is there a way to open the controller up and make the control think the left one is right and the right one is left so basically swap them about
stupid and unnecessary to do smh!!!
This did work for me but when i tried to connect the wired controller to a different ps4, it would not connect but stay connected to the previous ps4? Anybody know what im doing wrong?
You got hold the pair button again to pair at your newer console