The size of the spray looks very small, having to make a number of passes to cover one side... maybe I'm missing something but it looks terrible to me, like it's just being run from a hose instead of pressure washer. Was the nozzle not closed enough to get higher pressure?
I bought one a while ago now when you recommended a red quite cheap snow foam,was on offer with quick change adaptor and a gun with the swivel joint from one of your contacts. Its quite good with my Karcher K4 but a mate bought the higher flow K6 and my same snow foam works amazingly. It is defo a matter of water flow rate counts for alot in these water powered “Venturi” snow foam devices. I am yet to do that nozzle or brass inside mod you showed us on a video of yours. Cheers
the mod will whip up more foam will on lower powered systems. you just need to be carefully it doesnt back the pressure up too much... if your machine pulses after putting in the 1.1 orrafiface you can go back to 1.25 you may also need to use larger quick release nozzles to decrease back pressure.
@@ForensicDetailing thank you Jon, can you point me in the direction of where I can try to get this 1.1 size brass part. Tbh I can’t for the life of me remember who I bought it from! Cheers.
@@lilchapmanlil If you jet wash it off and leave it to dry you'll get water spots. If you jet wash it off and dry it you'll be rubbing dirt into the panel..
@@MM168NSX i tried carefully to use onr in a spray bottle and place towels under the drop point were you spray. But still the latter. Then I leave my card.
@@gary7323 tag Heuer video. Just done it again. It ain't phone handset based. It's TH-cam and the channel. You probably have TH-cam premium membership.
I agree, Andrew. Pricey. I just can’t wrap myself around a foam cannon that requires a pressure washer. I want to give the IK pro foam 2 or 9 a chance. The 2 doesn’t hold much product.
@@callumtoye20 as a car washer that doesn’t wash cars that are as dirty as the ones shown in car detailer videos I don’t want to purchase a foamer that has poor reviews. They need too much pumping between coverages of small areas, don’t hold much product, leak, don’t spray a good foam or cover wide areas.
The size of the spray looks very small, having to make a number of passes to cover one side... maybe I'm missing something but it looks terrible to me, like it's just being run from a hose instead of pressure washer.
Was the nozzle not closed enough to get higher pressure?
I think the Griots brilliant foam cannon is the best I've ever used.
Agreed. Our Brilliant cannons replaced our MTMs and haven’t looked back. Teamed up Bilt Hamber Touchless it’s a fantastic combo. Griots nailed something.
I bought one a while ago now when you recommended a red quite cheap snow foam,was on offer with quick change adaptor and a gun with the swivel joint from one of your contacts. Its quite good with my Karcher K4 but a mate bought the higher flow K6 and my same snow foam works amazingly. It is defo a matter of water flow rate counts for alot in these water powered “Venturi” snow foam devices. I am yet to do that nozzle or brass inside mod you showed us on a video of yours.
Cheers
the mod will whip up more foam will on lower powered systems. you just need to be carefully it doesnt back the pressure up too much... if your machine pulses after putting in the 1.1 orrafiface you can go back to 1.25 you may also need to use larger quick release nozzles to decrease back pressure.
@@ForensicDetailing thank you Jon, can you point me in the direction of where I can try to get this 1.1 size brass part. Tbh I can’t for the life of me remember who I bought it from! Cheers.
What foam? Looks too thick for bilt hamber? Autoglym?
wax is dead snowfoam m8
Very very nice. I like it.
Performance wise it's ok. But the bottle is bobbins. Can't see through the little window thing.
I'm about to donate mine to my brother in law.
If it doesn’t fucking tip over, I’ll buy it
Ah was wanting see if you liked this !
Looks like a quality product that john
you should check out private plates for your new motor, i typed in fdc and it came up with a lot of 5 digit plates for 166, look cool in a 4d plate
It’s the best looking cannon IMO. I was hoping to see a more in depth review.
its not a review its just a you tube short of me using it. more to come on lances soon.
What do you do when you get overspray of snow foam onto another car?
You go and lick it from the other car obviously... or you simply jet wash it off when you come round to using that lol not rocket science.
@@lilchapmanlil If you jet wash it off and leave it to dry you'll get water spots.
If you jet wash it off and dry it you'll be rubbing dirt into the panel..
@@MM168NSX i tried carefully to use onr in a spray bottle and place towels under the drop point were you spray. But still the latter. Then I leave my card.
Hmmm so what? It looks like a quite mediocre snow foam Lance 🤔
video does not make any comment about the snow foam lance performance. Its just a short showing it in use.
🎮
Snowfoamin in hot sun..hmm...🤔🤔
yep and no water spots or soap stains :) hmm
wow you have officially made it to the big leagues Jon! You are snow foaming! Congrats! :) lol ;)
🌬
Not sure if we need an advert to begin on a 54 second shorts video
I never got an advert must be your phone mate
@@gary7323 tag Heuer video. Just done it again. It ain't phone handset based. It's TH-cam and the channel. You probably have TH-cam premium membership.
I don’t have TH-cam premium but I didn’t get any Ads with this shorts video, I even looked again and still didn’t
No ad here either 👍
Now a we buy any car advert
Don't get the golf wet lol
Very expensive cannon for an average performance
I agree, Andrew. Pricey. I just can’t wrap myself around a foam cannon that requires a pressure washer. I want to give the IK pro foam 2 or 9 a chance. The 2 doesn’t hold much product.
Nearly all of them are rebranded
@@callumtoye20 as a car washer that doesn’t wash cars that are as dirty as the ones shown in car detailer videos I don’t want to purchase a foamer that has poor reviews. They need too much pumping between coverages of small areas, don’t hold much product, leak, don’t spray a good foam or cover wide areas.
SUBSCRIBE! 🙄