Great video Edwin. I have learned that if you wipe your filler down with laquer thinner prior to sanding, it sands alot easier and doesn't fill your sandpaper so fast. Thanks and take care.
No degreser before applying the stopper after the factory paint was feathered out..... leaving your self open for mapping on the edging further down the line 🙈
Good work but 1 thing I can't understand is why you applied only 1 lite coat of primer is it the type your using that allows u to do this?? And not have to worry about the filler bleeding through.or do you plan on sealing it before painting?
Because they are old school and good only for large sail panels. The sander he is using is a Mirka and slick as whale shit! The paper technology also now allows this. Don't know a professional body man, and I know hundreds, that would use an air board on this.
Do you think all people that put out video's, free of charge, so we all can learn sit by there computer and wait for questions? WTF Agelo. And I just left this comment I am now waiting by the computer for you to answer my question.
Yes,I’m fine.The Chinese New Year soon,So I’m busy ,We all have a holiday at this time in China ,But I still have a little work to do.How is the new job ?Hope everything goes well with you.
carmine barletta si perche lo stucco con due spatole col manico!!!????Minchia che maiale..e poi si stucca per lungo mica per verticale...sai che ondulazioni....in Italia sarebbero disoccupati sti cani
His skills are lost to painters in Vietnam. You only know how to use machinery vietnam does not use machines. I do not know how to scoop with vietnamese scabbard, do not know how to rinse matit by hand, try some solo artist painted with vietnamese who better
That may be true, but that is not because you are all so awesome in Vietnam. It is because your country is or was until very very recently underdeveloped. So you had no access to these machines. However it will now not be long before you "panel beaters" start to understand how these machines cut down on labor and are standing in line to buy one. And in no time "Unions" which you probably don't know the term (look it up), demand it. FFQ, your time is coming I promise you. You can not stay the way you currently are forever. Your people are soon going to demand better things.
Parabéns pelo seu Trabalho, está me ajudando muito!
Great video Edwin. I have learned that if you wipe your filler down with laquer thinner prior to sanding, it sands alot easier and doesn't fill your sandpaper so fast. Thanks and take care.
never heard that great tip
@@420sonni yup, takes the resin layer off the top that rises to surface.
Perfect body work and prep, amazing!!!
Pretty to watch champ,you got skills!
Отличная работа 👍
Always very good work 👍👍👍
Wow
thank's my friend
It's always a pleasure to watch your wonderful videos.
you are very good
Beautiful work 👍👍👍
Hard work good job sir
you are the like the king drug dealer of paint and body repair . very very good prep and painter
Thanks👍👍
Great Work!! Excellent Outcome! what type hand block sander are you using there? Liked !!
No degreser before applying the stopper after the factory paint was feathered out..... leaving your self open for mapping on the edging further down the line 🙈
Bravo,good job!
nice job my friemd
thank u Konstantin😁
Hi, my friend 👍👍👍✌😃
Good vids
Good work but 1 thing I can't understand is why you applied only 1 lite coat of primer is it the type your using that allows u to do this?? And not have to worry about the filler bleeding through.or do you plan on sealing it before painting?
Thanks,i use a uv filler because it is very thick i only need one coat its hard as rock and thicker then normal filler👍
Very good job! like doctor!! what type of surfaser you use here?
Sikkens uv primer
Great
good jobs
I've always curious how much the painted layer will be thicker than the factory oem paint if the repair work done at professional level.
you need to keep it as low as possible, if you have to much body filler on the panel, it will become dangerous
@@DjZeroPlayer1 Well that was sure as hell not the intelligent answer he was looking for.
👍👍👍
Merci bien 🙏
charlotttttttttt
good job. surfacer spies hecker?
Its sikkens uv primer😁
Hi
Helo ok 💪
Guick and EfficientlY !!!
What is the item at 26:53?
Lahar.prasad chauhan
Hi brother,I haven’t seen you for a long time, I Have been busy in recent months
Hi bro! How are you these days? I m switched from job last october
Don't understand for the life why you are not using a air file.
Because they are old school and good only for large sail panels. The sander he is using is a Mirka and slick as whale shit! The paper technology also now allows this. Don't know a professional body man, and I know hundreds, that would use an air board on this.
Hello Friend. Why do not you answer?
Sorry my friend,i m using standox now so every vid from now on is standox👍
Do you think all people that put out video's, free of charge, so we all can learn sit by there computer and wait for questions? WTF Agelo. And I just left this comment I am now waiting by the computer for you to answer my question.
Fubuless
Thanks
Viet nam i don`t no....
Wheres your dusk mask
Yes,I’m fine.The Chinese New Year soon,So I’m busy ,We all have a holiday at this time in China ,But I still have a little work to do.How is the new job ?Hope everything goes well with you.
I'm fine to thanks! New job is excelent very happy with it. How is the quality of the repairs in China?
My Favorit Channel. China pays great attention to quality,but still has some cheap labor!They work badly,but this’s getting better!
Hello possible request
Apaan ini.. lama bener.. gw 5 mnit kelar tuh
Veramente tutti pensate che questo ha fatto un buon lavoro? Questo è un lavoro pessimo
Sir.haindi
M
tu es un très bon peintre mais tu as une facon bizarre de travailler
stephanie digitello
un peut bezar de mastic
Cambia mestiere non ne hai fatta una giusta......esiste il fondo scuro per colori scuri...si vede ancora tutto lo stucco.
carmine barletta si perche lo stucco con due spatole col manico!!!????Minchia che maiale..e poi si stucca per lungo mica per verticale...sai che ondulazioni....in Italia sarebbero disoccupati sti cani
Le spatole sarebbe il meno...............ahahahahahaha.
,🧩
His skills are lost to painters in Vietnam.
You only know how to use machinery
vietnam does not use machines.
I do not know how to scoop with vietnamese scabbard, do not know how to rinse matit by hand, try some solo artist painted with vietnamese who better
That may be true, but that is not because you are all so awesome in Vietnam. It is because your country is or was until very very recently underdeveloped. So you had no access to these machines. However it will now not be long before you "panel beaters" start to understand how these machines cut down on labor and are standing in line to buy one. And in no time "Unions" which you probably don't know the term (look it up), demand it. FFQ, your time is coming I promise you. You can not stay the way you currently are forever. Your people are soon going to demand better things.
Videos are too lengthy
Then scroll through it you dumb fuck
MusicAddiction lmao
Ffsk it's real time bodywork from an expert. You couldn't get a better education if you paid for it.
Im sori but its stupid work
Why ??
Yes please tell us all why it is so stupid. What stupid job do you do? Haj fahanallli khukar kse higppan?