I watch your videos for hours. My dad was a great painter like you. I was his prepper. And just as he was going to have me start painting he passed away. I watch your videos for the advice and tips. I prep 400 hr pay periods by myself. And now he's gone I don't wanna prep for no other painter. I wanna paint. He left me his tekna pro lite and his iwata supernova. Thank you for you great videos.
This is my opinion in relation to the time on your videos. When you show a full job it eliminates the assumption of the time it takes and the work process. So its great to get the reality of the job itself so that amateurs such as myself don't get frustrated thinking why is it so hard and long to complete a task that came off so easy after watching very short edited videos. I like to see when you correct mistakes because its impossible not to get any, and knowing the technique, when to use it, and what not to worry about is what determines real skill. So occasionally a long video on a specific topics is great so no stress. I have a friend that introduced me to your videos and he messes up to much because he doesn't fully understand the process and now he gave up. I am far better now so I can easily follow your work but before it was above my level since some approaches for beginners aren't included. thanks alot
Another big thank you from northern Ireland, your video's are magic , if you want a 57 year old apprentice I'm your man, always learning from you, cheers mate.
I can't thank you enough for this video. I recently got into a fender bender and had to reshape and repaint my rear bumper, including bumper end caps, and your clear coat video enabled me to get my clear coat looking like glass for the first time in my life. Every other time it always had orange peel and this time it's nearly flawless, and I even did it in my garage with the door open! I followed your 1/3 hardener, 10% acetone formula @ 2bar and it sprayed on perfectly with 2 coats, 4 minutes in between coats. Thank you thank you! Only issue now is my bumper looks better than the rest of my truck!
@@TheGunmanChannel ciao sono di Milano e sono un tuo fans ,sono verniciatore ,sto comprando una devilbiss GTI prolife per trasparente ( clear ) mi sai dire che ugelli usi ( esempio 1.2/1.3/1.4.....) dimmi il kit giusto ..grazie un saluto dell'Italia.
When you are trying to teach as you are doing, I don't think there is such a thing as a too long video. Love your vids, learning a lot, keep them coming !
Thanks for your video! I have done some paintjobs on my old beetle for several years. I stepped up a bit and now also did a fender, door, door paintjob on my black magic metallic Golf. I went well. I get several hints from your videos. That helped me a for do a descent job.
Well done, your a credit to us Painters, you made a nice job of that car. One of my last jobs before I left the trade was to repaint a brand new Astin Martin, which when It was in the showroom looked like the colour was uneven, Massive job but rewarding to know you can be trusted with a 100K super car. In the UK almost every body shop now uses water based paints, I see you used solvent base in this video, I prefer this too. I left the motor trade soon after I was only given 6 1/2 hrs on an insurance job to repaint two bumper bars a new wing and two door skins and repair the rear 1/4 panel. how could they expect you to earn you wages doing something like that.... Keep the video's coming they are very good
Novice when it comes to painting a whole car and I appreciate the editing and getting right into the job. Shooting the basecoat is new to me. Thanks and I'll be looking at your other videos.
I thought I had this metallic spray painting down pat, then I painted the bonnet, and now have wicked mottling. I figured I didn't allow the base metallic to dry off and put very heavy coats of clear down. Been following this channel, and bought the devilbiss GPI. Keep up the great videos mate!
My kids watch these videos with Play-Doh and slime called satisfying videos will this is my version of that these videos are not too long and is completely satisfying to watch you complete these jobs and see how you do it you are a gift to a lot of painters like myself that are good but not great thank you for everything you do keep it up man
I love all your vids btw, just subscribed! Im a painter as of the past 16 years. Still learning everyday. Can u do a video on wetbeds and blending pearls and hard to blend colors etc?
Gunman thanks for your videos you brought back my motivation to get back into this job and be positive and knock out good quality jobs for awile was getting tired of this trade but watching your videos brought back my inspiration to knock out quality jobs and take pride in the work keep up the awesome jobs !!
Nice Mr. Gunman! Cheers from Griffin Georgia in the States. I am learning to paint at Fifty years old, retiring from Fire Dept soon and have always wanted to paint. Adding on to my garage and putting in a Paint Booth. Been practicing with House of Kolor and some flakes, having a Blast! Watching and learning, thanks Mate!
A good video for me as I live in Western Australia; particularly about the temperature and how it affects the paint. I had ideal conditions yesterday for the primer but it is raining today and with no booth so painting is off..It was usefull to see your paint style and I shall try to replicate that when spray colour.
NOT too long. As long as you keep the info coming, We're paying attention. A lot of videos keep you riveted for much longer. Ed Kafka has one that comes to mind, he is flaming a tank, and you never get bored, when it's over, you're disappointed. I think that one is about 40 minutes. You do a fine job of narration while you work. Informative and well done! Maybe subtitle or overdub the section with bad audio (@ 7:20) Keep em coming, Thanks, Scott
Well done beautiful finishing and also nice application mate. You are good man. I like to watch other people and their technique because there is always room for to improve. I'm car painter as my self.
I have been watching few of your videos over the past 2 weeks. I have to say it is pretty handy to have the painter themself comment on the skills and technique used on each car. I hope your business gets a positive effect from the videos myou've uploaded so you can assure your customers how you handled the job. Really enjoying watching your videos whenever I feel like watching and listening. I did do work expirence as a panel beater for 2 weeks - and went back for 2 weeks on holidays for more work.
I'm in refinishing/ collision school right now, but we haven't had any booth time yet. This is an excellent video explaining what I've learned so far in the classroom! I like how you explained the blend reducer, I've been curious how that works. Great video!! Thanks for posting this!
great educational video man, appreciate your time, posting and sharing it. Very useful, I'm finishing up my DIY car project and preparing it to paint. Great job man!
Mate you are very quick with the gun. Lovely skill to watch. I like it how you include all the footage so we know how it is done. If the others don't like it they can always use the fast forward button
Actually, he's spraying very slowly but that's the HVLP gun that restricts how much you can put on. In the old days, they used a suction feed gun and you would spray three times as fast...you had to because you were pounding on the paint and if you slowed up ,you would get runs.
Great man, thanks for your feedback and make sure you check out some of my more recent videos, I think they are better than this video and there are some pretty cool ones coming soon too. Thanks again and pleased to meet you Carlos.
cheers gunman the use of diffrent air caps is some thing I will look in to (was not aware there was a choice ) wish i had 35 deg to spray in here in NZ. that would make life real easy LoL Great tutorial as always
VERY nice !!! ( 11:55 ) you mentioned nice orange peel ) ??? No one wants orange peel ? Also , can regular reducer be used to as the ''' blending reducer '' ? Actually never tried that '' blending technique ! Thanks so much for superb video !!
That seems so relaxing to paint a vehicle you just clear your mind and go to work it would be awesome to have that job but that’s all I would want to do I wouldn’t want to do bodywork I would just want to paint
hi you're spraying is flawless . always wanted to learn to spray like a professional. really appreciate all the hard work you put into your videos. and explaining how to do this etc in the most comprehensive way. hats off to you. I've subscribed. I bought a couple of sprayguns of ebay. but they are absolutely crap. my fault they where cheap. but after seeing your video on spray guns I've decided to purchase the deVilbiss gti. thanks again for all your hard work. be nice to know you're name.
The Gunman I’ve been watching some of newer vids and I’m hooked !! I learned so much already. Great views with head cam too. Helps you get a feel for the speed and distance etc. Thanks again mate 👍🏻
I love your work lots of detail about psi temp and mixtures love it keep doing what your doing wish you were in the us to paint my corvette your work comes out flawless like diamond's 👌
Just wondering, when you spray one door and the go to the next door, what happens to the overspray onto the first door? Does this not make the first door overspray dull? Also is the two pac clear bad for your skin and eyes?
You'll have to wait in line lol, I have many fans from the US. But I do plan on making it there one day for a bit of a working holiday and meet some of you awesome peeps. :-)
Thanks for your videos gunman . I think I'm having better results I have painted a few jobs with reasonable success but sometimes more runs than Bradman Sometimes when you're talking it's a difficult to hear over the fan. Good stuff Steve
not to long. great to see it in detail.. Just started to "follow" you... I'm not good to paint, just an hobbie. Good to wach and learn. Greatings from No(r)way
Gunman our blending reducer totally sucks unless you get the stuff in spray cans. So many guys on my video I used it say I did it wrong.....Ha ha I did it the same way you did. polish the area I berended into. guys say you gotta sand it. ha ha. say it will delaminate. Probably the same guys who gave you thumbs down.
dude amazing j.o.b all my years in shop we never had this base coat clear coat step it was either enamel or lacquier or emron epoxi which is nasty stuff to work with but was used mainly truck apps we back then didn't have the water borne paints they were just in infant stage.. but flawless work
Right on. Don't worry about length. We beginners need all the help we can get ;) Some videos rush through like we know what we're doing. Thank you
I watch your videos for hours. My dad was a great painter like you. I was his prepper. And just as he was going to have me start painting he passed away. I watch your videos for the advice and tips. I prep 400 hr pay periods by myself. And now he's gone I don't wanna prep for no other painter. I wanna paint. He left me his tekna pro lite and his iwata supernova. Thank you for you great videos.
This is my opinion in relation to the time on your videos. When you show a full job it eliminates the assumption of the time it takes and the work process. So its great to get the reality of the job itself so that amateurs such as myself don't get frustrated thinking why is it so hard and long to complete a task that came off so easy after watching very short edited videos. I like to see when you correct mistakes because its impossible not to get any, and knowing the technique, when to use it, and what not to worry about is what determines real skill. So occasionally a long video on a specific topics is great so no stress. I have a friend that introduced me to your videos and he messes up to much because he doesn't fully understand the process and now he gave up. I am far better now so I can easily follow your work but before it was above my level since some approaches for beginners aren't included. thanks alot
This is my first video to reach 100,000 views on TH-cam, check it out if you missed it.
hey man, do you scrub the base color before applying the clear coat?
fishbonedotcom No, sometimes I use a tack cloth gently
+The Gunman is is so because the metallic bits can shift ?
Ednamole Qwe No it's mainly if the metallic starts drying as you're applying and goes dusty on blend areas
The Gunman how come you never use sealer?
Another big thank you from northern Ireland, your video's are magic , if you want a 57 year old apprentice I'm your man, always learning from you, cheers mate.
I can't thank you enough for this video. I recently got into a fender bender and had to reshape and repaint my rear bumper, including bumper end caps, and your clear coat video enabled me to get my clear coat looking like glass for the first time in my life.
Every other time it always had orange peel and this time it's nearly flawless, and I even did it in my garage with the door open!
I followed your 1/3 hardener, 10% acetone formula @ 2bar and it sprayed on perfectly with 2 coats, 4 minutes in between coats.
Thank you thank you! Only issue now is my bumper looks better than the rest of my truck!
Domush DIY Great to hear mate, that's all the motivation I need to make the next video :-)
@@TheGunmanChannel ciao sono di Milano e sono un tuo fans ,sono verniciatore ,sto comprando una devilbiss GTI prolife per trasparente ( clear ) mi sai dire che ugelli usi ( esempio 1.2/1.3/1.4.....) dimmi il kit giusto ..grazie un saluto dell'Italia.
When you are trying to teach as you are doing, I don't think there is such a thing as a too long video. Love your vids, learning a lot, keep them coming !
PRACERZ Thanks :-) This is one of my earlier videos and was still finding my feet as a TH-camr, thanks for the feedback.
it's not too long I like watching paint jobs getting done that's how we learn from each other great job..
Thanks Desi, check out my newer videos I think I've got a lot better at my video making lately.
I learn a lot from your videos. All it takes is confidence and patience and you can easily do good work.
Great job mate, takes me back to my painting days. Everything on point
This is a really GOOD video. Not too long at all! It is very instructive for people who want to learn how to blend repairs in the color coat.
Thanks for your video! I have done some paintjobs on my old beetle for several years. I stepped up a bit and now also did a fender, door, door paintjob on my black magic metallic Golf. I went well. I get several hints from your videos. That helped me a for do a descent job.
Your the best man,I have been a mechanical auto repair owner for many years,Just took up spraying as a hobby you have helped me a lot thank you
Dont be worried about the length of the video longer they are the more I can learn from you . Amazing work man . The k you for doing this
Thanks again for watching man, I value your feedback too cheers.
Well done, your a credit to us Painters, you made a nice job of that car.
One of my last jobs before I left the trade was to repaint a brand new Astin Martin, which when It was in the showroom looked like the colour was uneven, Massive job but rewarding to know you can be trusted with a 100K super car.
In the UK almost every body shop now uses water based paints, I see you used solvent base in this video, I prefer this too.
I left the motor trade soon after I was only given 6 1/2 hrs on an insurance job to repaint two bumper bars a new wing and two door skins and repair the rear 1/4 panel.
how could they expect you to earn you wages doing something like that....
Keep the video's coming they are very good
It's bullshit hey, they are starting to do the same shit here in Australia.
Joy to watch every move of a pro. Looks like the paint job has renewed the car.
Novice when it comes to painting a whole car and I appreciate the editing and getting right into the job. Shooting the basecoat is new to me. Thanks and I'll be looking at your other videos.
I thought I had this metallic spray painting down pat, then I painted the bonnet, and now have wicked mottling. I figured I didn't allow the base metallic to dry off and put very heavy coats of clear down. Been following this channel, and bought the devilbiss GPI. Keep up the great videos mate!
WOW gunman over a mil. Great job. I was terrible at making videos. But getting better now. More metal work stuff now. less paint.
Always plenty of detail and very informative. Keep up the great work!
My kids watch these videos with Play-Doh and slime called satisfying videos will this is my version of that these videos are not too long and is completely satisfying to watch you complete these jobs and see how you do it you are a gift to a lot of painters like myself that are good but not great thank you for everything you do keep it up man
I painted cars and trucks for a long time and I like your technique and teaching method, nice job
I like the long videos and especially when we get to see the final car done,polished and ready to go...
.
Jamiekins 1350
I love all your vids btw, just subscribed! Im a painter as of the past 16 years. Still learning everyday. Can u do a video on wetbeds and blending pearls and hard to blend colors etc?
Great easy to understand explanation from a skilled tradesman
Good length of video, helped me get a little bit of knowledge. I'm a diy dude now I am retired. Cheers
Your vids are awesome.. thanks for your time. Im a detailer but am moving to do this.. thanks
Your videos are never to long it's better this way alot more people will understand better
You're my favorite painter to watch on TH-cam. Upload more vids! :)
Gunman thanks for your videos you brought back my motivation to get back into this job and be positive and knock out good quality jobs for awile was getting tired of this trade but watching your videos brought back my inspiration to knock out quality jobs and take pride in the work keep up the awesome jobs !!
Nice Mr. Gunman! Cheers from Griffin Georgia in the States. I am learning to paint at Fifty years old, retiring from Fire Dept soon and have always wanted to paint. Adding on to my garage and putting in a Paint Booth. Been practicing with House of Kolor and some flakes, having a Blast! Watching and learning, thanks Mate!
Thanks, maybe I can come say hi when I visit USA :)
The Gunman u definitely should come visit USA. It’s awesome here
for automotive which sprat gun is more good ..
w 101 132g or w 200 ?
we waiiting for reply
Celtic Warrior have you stuck with painting?
A good video for me as I live in Western Australia; particularly about the temperature and how it affects the paint. I had ideal conditions yesterday for the primer but it is raining today and with no booth so painting is off..It was usefull to see your paint style and I shall try to replicate that when spray colour.
Very PROFESSIONAL job ! your eye for blending and over lapping coats is very good , thank you for sharing showed it to my paint class today !
it's long, but it's informative. I don't know anything and the process intimidates me to much to try. great job...
Check out this vid, you may get a bit more out of it.
thegunman.net.au/spray-painting-for-beginners/
Great video. You dont ramble on and repeat yourself 10x's like alot of these dudes do, its ridiculous. Informative and easy to watch
Change nothing mate this is perfect video for smash repair work
Thanks a lot man, its now an older one of my videos and good to hear people like it.
dude you are the best spray guy I have ever seen.
NOT too long. As long as you keep the info coming, We're paying attention.
A lot of videos keep you riveted for much longer. Ed Kafka has one that comes to mind, he is flaming a tank, and you never get bored, when it's over, you're disappointed. I think that one is about 40 minutes.
You do a fine job of narration while you work. Informative and well done! Maybe subtitle or overdub the section with bad audio (@ 7:20)
Keep em coming,
Thanks, Scott
Well done beautiful finishing and also nice application mate. You are good man. I like to watch other people and their technique because there is always room for to improve. I'm car painter as my self.
I have been watching few of your videos over the past 2 weeks. I have to say it is pretty handy to have the painter themself comment on the skills and technique used on each car. I hope your business gets a positive effect from the videos myou've uploaded so you can assure your customers how you handled the job. Really enjoying watching your videos whenever I feel like watching and listening. I did do work expirence as a panel beater for 2 weeks - and went back for 2 weeks on holidays for more work.
Thanks man, and I'm glad you enjoy my vids.
Brother, you talk about your videos being too long, man I can literally watch you paint cars for hours on end! Great videos! Keep up the good work!
+Rod Castaneda 🍻
you always bring life to all the cars you spray. lovely.
I'm in refinishing/ collision school right now, but we haven't had any booth time yet. This is an excellent video explaining what I've learned so far in the classroom! I like how you explained the blend reducer, I've been curious how that works. Great video!! Thanks for posting this!
I learned a lot by watching your motions. Short videos dont allow this type of learning
great educational video man, appreciate your time, posting and sharing it. Very useful, I'm finishing up my DIY car project and preparing it to paint. Great job man!
iv just started spraying bikes in uk and this might be a long video but so impressed with it
NEVER too long !!! Greeat to watch a expert work
Gray mate thank you for replying to my question about palm sander I appreciate and look forward to seeing your good work
No probs man, I always do my best
Children now have a very short attention span.
Your video is NOT too long.
Good video!!
Just found your videos wow not to long at all.you are very clear on what talking about.for what it is worth good on you mate
A new subscriber from Spain- Barcelona.Gracias for their videos and learn a lot comments with usted.Un greeting.
Thanks and welcome, be sure to check out my more recent videos and stay tuned because there is some great stuff to come.
Cool, i just clearcoated my old snowmobile to get som gloss and shine to it, and it turned out great 👍
Your videos helped me become a better painter love watching your videos.👍👍
Mate you are very quick with the gun. Lovely skill to watch. I like it how you include all the footage so we know how it is done. If the others don't like it they can always use the fast forward button
Actually, he's spraying very slowly but that's the HVLP gun that restricts how much you can put on. In the old days, they used a suction feed gun and you would spray three times as fast...you had to because you were pounding on the paint and if you slowed up ,you would get runs.
Fantastic video mate. Not to long at all. The more informative the better.
I'm learning a lot from you, soft spoken well spoken. thank you
No dont delete it is a very intuitive video
You make that look so easy !! Thats a good job. I'm starting up my own alloy repair business. Some good tips !!!
Informative video, well done! Video length not an issue.
very nice, blender technique is a difficult bad shit all time for me, you showed it as a teacher.
I think the video time is good, not boring at all. Super clean job. Keep it up man. You got a new subscriber from Puerto Rico 👍
Great man, thanks for your feedback and make sure you check out some of my more recent videos, I think they are better than this video and there are some pretty cool ones coming soon too. Thanks again and pleased to meet you Carlos.
cheers gunman the use of diffrent air caps is some thing I will look in to (was not aware there was a choice ) wish i had 35 deg to spray in here in NZ. that would make life real easy LoL
Great tutorial as always
+restolad Hey Restolad, I am missing your great videos, glad to hear your still busy
Awesome, good job thank you so much. I plan to paint my bumper cover soon for the fist time and I want to learn all I can before I try.
great video. Not too long. I like to see the complete job to finish, and the end product. thanks
VERY nice !!! ( 11:55 ) you mentioned nice orange peel ) ??? No one wants orange peel ? Also , can regular reducer be used to as the ''' blending reducer '' ? Actually never tried that '' blending technique ! Thanks so much for superb video !!
Keep dropping video's bro I'm addicted to painting cars now thanks to my u tube family thanks bro
That seems so relaxing to paint a vehicle you just clear your mind and go to work it would be awesome to have that job but that’s all I would want to do I wouldn’t want to do bodywork I would just want to paint
great video man. it is not long just perfect. thank you
DITTO ! ..... Gun man is my favorite painter. Lays it on efficiently and even with great touch
Very nice painting job I am painting Saudi Arabia I miss you your job
Hey man great work as usual, forget about feedback on video length,you are taking your own time to teach people. If it's 2min or 50 min don't worry ;)
DITTO ! Gun man is the best there is to teach and demonstrate and he's real and Hubble !!!! Thanks Gunny
Thank you for the lesson,
,keep up the good work mate,
I am inspired ready to paint soon
Cheers from San Diego
Hi gunman. My name is Brian . I just want to say that I have watched alo't of your videos. And they are very awesome keep up the good work man
hi you're spraying is flawless . always wanted to learn to spray like a professional. really appreciate all the hard work you put into your videos. and explaining how to do this etc in the most comprehensive way. hats off to you. I've subscribed.
I bought a couple of sprayguns of ebay. but they are absolutely crap. my fault they where cheap. but after seeing your video on spray guns I've decided to purchase the deVilbiss gti.
thanks again for all your hard work. be nice to know you're name.
You are a great teacher, thanks for helping us all
Beautiful work! Video NOT too long! Leave it just like it is !! Liked !! Subbed !!
their never too long and always informative
This is a great video. Good job dude. The car paint looks like a million bucks.
I’m new to your channel and spraying car’s but this was a good starting point and I look forward to viewing your other Videos. 👍🏻
+Chris G thanks man, hope you enjoy the vids, this was a old vid and I think my newer videos are a lot better.
The Gunman I’ve been watching some of newer vids and I’m hooked !! I learned so much already. Great views with head cam too. Helps you get a feel for the speed and distance etc. Thanks again mate 👍🏻
ty gunny we enjoy your long videos keep em coming
I love your work lots of detail about psi temp and mixtures love it keep doing what your doing wish you were in the us to paint my corvette your work comes out flawless like diamond's 👌
Nice job. Thanks for sharing. Not to long. I especially appreciated the blending technique!
Thanks for the feedback mate glad you liked it
Grate job! Strange to start paintig from the flor up.👍💪
Just wondering, when you spray one door and the go to the next door, what happens to the overspray onto the first door? Does this not make the first door overspray dull? Also is the two pac clear bad for your skin and eyes?
Beautiful Job there Mate ! The next time you plan on visiting the States let me know. I'll have my 04 Corvette prepped and ready for color and clear !
You'll have to wait in line lol, I have many fans from the US. But I do plan on making it there one day for a bit of a working holiday and meet some of you awesome peeps. :-)
Hey man. I love your work. Following your foot steps
Thanks mate, be sure to check out my more recent vids, I think I am better at making them now days and I also have a better camera.
Man you do great work. You make it look easy. But I know better than that , it's tough.
Damn what a nice paint job mate !! Your an a expert 3.0 perfect done !!
Thanks for your videos gunman . I think I'm having better results
I have painted a few jobs with reasonable success but sometimes more runs than Bradman
Sometimes when you're talking it's a difficult to hear over the fan.
Good stuff
Steve
not to long. great to see it in detail.. Just started to "follow" you... I'm not good to paint, just an hobbie. Good to wach and learn. Greatings from No(r)way
Very professional demonstration. Enjoyed it lots
Gunman our blending reducer totally sucks unless you get the stuff in spray cans. So many guys on my video I used it say I did it wrong.....Ha ha I did it the same way you did. polish the area I berended into. guys say you gotta sand it. ha ha. say it will delaminate. Probably the same guys who gave you thumbs down.
every video that i watch of yours i watch from beginning to end
+TH-cam dude thanks man 👊 legend
Love your work ...I learned a lot by just watching your videos... should b a teacher at tafe, thank you
Excellent video (length and all), and beautiful job.. Much respect man..
Looks great! Blending the clear looked easy! Thanks.
Nice color, good video, and thanks for the instruction; I will shoot my motorcycle this weekend with base-clear.
John / Pittsburgh
Nice job mate... Came up real nice in the end
Outstanding Dude! Well explained and your skill sets are excellent!
Thanks for watching mate and I'm glad you liked it.
dude amazing j.o.b all my years in shop we never had this base coat clear coat step it was either enamel or lacquier or emron epoxi which is nasty stuff to work with but was used mainly truck apps we back then didn't have the water borne paints they were just in infant stage.. but flawless work
rock dawg Thanks mate :-)
your welcome G.day
plus we didn't have the HLPV guns back in the day mine ole school binks 7 with a seperate cup 2 quarts with hose to cup to gun what a pain
Spray gun technology sure has come a long way even in my 15 years from 2000'' when I started.
me back in the day early 1970 d's
It perfect.......noo need to change anything...great video...keep up the good work.. i learn a lot from you.
Mate love your vids and commentary. Keep up the good work.
If you liked this one you'd probably really love my newer videos, I think I'm better at making videos now.