Full complete frame off body restoration of 1995 Ford F Superduty crew cab 4x4 bodywork and paint
ฝัง
- เผยแพร่เมื่อ 2 ต.ค. 2024
- This was a long process. We do a whole frame off restoration on the 7.3 shop truck. We show you the steps to the paint and body process and how much it costs!
Thanks for watching
Plenty of previous videos down below in the playlist
7.3 build playlist
• 7.3 powerstroke shop t...
C&C Equipment stickers and merchandise can be found here
ccsurplus.ecwi...
Check out our friends at Area Diesel Service and mention us for free shipping
www.areadiesel...
Please be sure to check out there video on the turbo specs and all the options on the sx300 series
• #TurboTalk @AreaDiesel...
Build list of parts from Irate Diesel
www.iratediese...
Thanks for watching
Facebook
/ candcequipment
Instagram
/ ccequipment
Website
www.ccsurplus....
Email
sales@ccsurplus.com
A lot of work right there. Great job dad and sons. 👍
Lot of hours away from the family and a lot of $$$$$ if your a DIY. Great jobs guy.
Great to see your sons learning the trade and getting your knowledge of all types of mechanics and developers long term skills sets
There is so much work in a frame off restoration but I worker at the Chevrolet dealership back in 1972 when my older brother bought a new C 10 Cheyenne with factory AC. I bought it from my brother in 2002 and he had a local tech school do a paint job on the old girl. It looked like they were barn painters that did the textured job. I couldn’t stand it and did a frame off restoration. I could d believe how good the frame was but when I worked at Chevrolet I undercoated the truck using 35 gal of undercoat. All we had to do was steam clean the frame and where the undercoat had come loose there was some minor rust. The guy that was helping me said you must be planning to buy this truck when you were 19 years old when putting on that much undercoat. I did some figuring on the motor and to build the motor like I wanted it was going to be chunk of change and I found a GM performance 350 cui motor that pumped out 425 hp on regular gas. I found a brand new Rochester 4 barrel carb and re jetted it with some other tricks that made them scream. When I put the truck on the dyno it put out 472 wheel hp. They figured with the turbo 400 and all the other hp robbers it was a 600 hp engine.All in all I spent $30,000 bringing the family truck back to better than new. I put the optional wood floor in the old gal a year later. 10 years later I sold it for $72,000. I sold the original engine with a mountain of original parts for $12,000. I got my $30,000 back.
Clint, you are indeed a fortunate men to have two sons that want to work with you. Enjoy the videos.
2 sons, do you mean that Kevin is not #1 son?
Bro uses the paint gun like he’s done it before
@@genegoodman5233 you’re right 3 sons indeed 🤦♀️😂🤦♀️
For a non professional auto body painter you darn sure did a good job.
The hardest part of spray painting is not getting sags, runs or orange peel.
The first two are extremely hard to get out without "burning" the surrounding area.
Orange peel not so much.
Just a light touch of sanding with the right grit.
Plus, that you're teaching your sons about every aspect of what is being done is definitely outstanding fatherhood.gritins.
Given this posted post Christmas I hope all of the C&C Equipment family had a very Merry Christmas and that you guys have a very prosperous New Year.
Good to see it getting done,, would make a great viewer give away......after you put a super snake hood on it..
It’s going to look good when it is done
Great video Clint always enjoy watching videos with the boys working together 🇺🇸
Thanks 👍
Very nice color and the paint job is outstanding you rock Clint 👍😎🇺🇸NY
*I'm an expert by no means..* However, it was refreshing to see a video about painting something done by somebody who clearly knows the process. From being careful with the blaster, to the high build primer and blocking, down to the tape on the paint can to prevent spillage. Nicely done! I went to trade school for auto body and you guys done an exquisite job with the body and paint work. I commend you on explaining the process along the way as well. Too many people keep it a secret and that makes it difficult for people to learn. LOVE the new color over the gray. Take care 🔧🔩
Thanks
Lol hope mom dont watch….That was priceless
You know its special when boss man sprays his own truck 😂
😂😂 she’s watching 🤦♀️
Another awesome vigid!!!! I’m so glad you put those numbers out !!! Now people can see what it REALLY COSTS TO HAVE GOOD WORK DONE !!!
Paint looks awsome!
Man this is going to be way worth seeing finished it looks good in pieces can't imagine what's going to look like together thanks for sharing good job man Cubs
Good to see your boy's getting involved in this project they are going to be two talented young men with the variety of things they get involved in. You should be really proud of them.
Happy New Year to you all. Hopefully, it will be a prosperous one.
It shows how much you care about him and just being there to help him do things
Good jobs aren't cheap
Cheap jobs aren't good
This is a valuable lesson for any of the younger crowd watching this.
The old saying "you get what you pay for" is as true today, as it was 100 years ago
Hey Clint!! Nice to see the boys helping and learning with their dad. It's amazing all the prep and work you're putting into the truck, but it will be on the road long after the stuff they build today. Looking forward for the reassembly video.
Thanks 👍
I love what you and your boys are doing with this project. You've got the tools and the space plus the motivation and attitude to make it all happen. Very inspiring, brother.
Not much you can’t do with machinery the attention to detail is awesome great to see you passing all your knowledge on to your sons they seem eager to learn .Happy New Year to you and your family looking forward to more content in 2023
Glad to see the boys jumping in and learning great life skills. Character Counts!
Wow C&C! Hugh Project, it will be worth when it is Finally finished! Love your attention Detail and perfection and taking the time to doing Right!! Tucker and Hunter are doing a Great Job Helping Dad! Post Merry Christmas and You and your Family have a Very Happy New Year!!! 👍😊❤
Thanks so much!
I did auto body paint for ten years starting 1975. I learned the art of leading no plastic filler. The labor rate you charge is very acceptable fir the year 2022. Great job teaching the boys how to do this work.
Best wishes for 2023
I would like to see the over land camper completed next year.
Regards
Clint, and team, this was an excellent video and very educational I think personally I would have Aaron, teach both boys the tips for different metals and welders, it would be so important for their futures, can't wait to see the putting together of your truck.
brings back memories i was a painter for 20 years at CN painted locomotives, great video and it's looking great 👏👏👍👍👌
Cool, thanks!
That blue is very nice...it looks really good...great job guys!
Thanks so much!
The Chief Financial Officer..."You're way over budget."
Sounds familiar 😂🤦♀️😂thanks for watching 😉
Clint, it is good to see you got your boys helping you. Blue Streak Express 💙 is coming along very well. It will look really good sitting next to Blue Streak 💙!!
Tape on the paint can so it doesn't drip down the can when poured - that's a good one. Filed for use.
I like how you work. Calm and deliberate, economy of effort, like you know exactly what you're doing.
Good stuff, thanks for taking us along.
Thanks 👍
So now it's the Smurfit truck. Lol God bless
Only one way to do it the rite way! Merry Christmas happy new year!
Same to you!
Nice to see the gun moving...shows you have done it many times. Reminds me of years back in my shop.
That you boys job
No doubt on blue being the right color. The Lord chose blue for the sky. He ain't wrong. Looks great. A friend of mine uses this stuff called Icing on his paint jobs. He does great with it.
So much respect for Mr. and Mrs. Clinton and the job they are doing. But I’m sure the grandparents had something to do with it.
Thank you for sharing it is really encouraging to see young people growing
Thanks so much! We are very proud of them and happy new year!! 🎉
Clinton Hunter Tucker and Kevin great video! The experience the boys are getting is priceless! No matter what they do in adult life they will have a jump on most people! Your teaching and work is being passed down and seems to be taken very seriously by the boys! It’s such a pleasure to watch a family grow like this! Thanks for sharing! Kevin
I have spent day block sanding back in highschool. I am glad you pointed out the importance of sanding at an angle in a cross hatch! Makes all the difference in the world. I learned in a body shop that worked on heavy trucks. Seeing your videos brings back a lot of memories!
Right on
Clinton you did a great job preparing and painting that truck! I bet it looks amazing when it’s back together!
Thanks 👍
If you ain't making noise or making a mess...you ain't working. Lots of good family progress on the shop truck Clint.
Right on
i wish i had your paint booth the lady of the house hit a deer so the 05 escape now needs bunch of work weve got the parts in but ive got an old dairy milkin shed for a shop LOL dust n all manner of stuff 100+ yr old place here an i just got to the part where you open the paint an LO n BEhold its the same color as the escape ive got to work on
When I saw you mark some of the spots with a magic marker I choked. When I worked the paint booth at CAT magic markers were banned. Marks from those would bleed thru. I think we were using acrylic but don't remember for sure. I'm know you controlled the situation because i've already seen the finished truck before I watched this vid. I've dabbled in body work but not at the level you guys are taking. WOWl!!!!! As you know you can't fix body prep with more paint....
It may just be a "shop truck" but you don't know how to short cut the prep work!!!!
Thank You Clint for the cost breakdown. That is awesome. Paint costs have gone plum crazy.
I'm doing basically the same thing on my 74 F100 short box 4x4. Cab is rusted out bad, so I have a cab off a 77 I'm using. Its complete, no dents or rust. The bed is a little rough, but I have to save it because finding a short box is incredibly difficult and expensive. I don't have a lift or anything, so I'm using an engine hoist secured through the floor to lift it.
Thanks, Clint you are a very honest guy showing us how you just beat that floor up wid a hammer and not cut and arch it but it was a very interesting video 👍
Yep, manhours and supplies add up quick ... especially on "Frame Off". Did my 1961 MGA as a college kid (and thousands of F-16 and C-130J's over decades since) so well acquainted with the tasks. So yeah, $27k is a good number for what you and the guys have put into it. Thanks for letting us tag along and hope you all got some restful down time during the Holidays (and good home cooking you don't get at work or on the Road).
Love the color
Your a jack of all trades Bossman..Ur gifted...nice work with ur boys....
608 steering bracket used to make those in a die cast mach...Great Vid 👍👍👍👍👍👍🛠🛠🛠🛠
Great video as to how to do it right.. actual labor hours and cost of materials. Like your attention to the details and seeing you paints pretty impressive.. appreciate you sharing the costs as I have a truck in my fleet going in for painting this year. Wishing you and your team continued success for 2023😇🇺🇸🔧👍🎉
Great job very impressed
Thank you!
Big project, will be a nice rig when done. Boys are good workers. Helps alot
That blue is perfect. Lot better than that grey
Nicely done, enjoyed the video, realize how much work is involved. I’ve been repairing some old vintage tractors and don’t do the body work but when finished it gives a real sense of accomplishment. Cheers my friends.
Thanks 👍
You don't want happy panels waving back at you! 🤭
Lol
Happy New Year!
The best thing in all of this, is the knowledge you are passing down to your sons. The inclusion of your boys is by far the best part about your video sharing. We (as a society need more of the male role modeling and presence of a father in children's lives).
As kids, and to include the teenage years, sometimes the children resent the guidance of a parent, however years later, the actual truth of that presence and guidance becomes evident in their lives.
I commend you for being there for your boys. I wish I had had a father similar to you when I was growing up. Mine was never around, but I thank God I turned out fine. Presently, I have three grown kids. My wife and I reared our children (including a son), being ever so present in their lives. I made sure that they didn't go without a father's love and guidance.
So, in closing, may our Lord continue to bless you and your family. Amen.
Keep those videos coming. 🙂🙏
Thanks
I feel it’s very important to teach them right when they are young!
Nice work. I love the videos. You are lucky to have your boys work with you, and they are lucky to have a dad to teach them in that sweet shop. Merry Christmas
I think y’all are doing a damn good job. Love it.
I used to do autobody and paint,maybe a little helpfull hint,mix up a batch of paint and reduce it maybe 3 to 1 mostly metalic hold your gun back about a foot and spray it,ll help get rid of the streaks.
Clint, amazing video again! The projects are brilliant and are really educational as well. I do like how you will explain some of the basics as well as I'm sure I'm not the only one that isn't an expert. As for your sons, hard working polite and respectful, you and your good lady done a great job there. Thanks again for all the hard work with the content! It's very much appreciated! Hope you and yours had a great Christmas and have a great new year!
Many thanks!
Yes, ford made a factory crew cab in Louisville starting in 92. Only thing a sub company assembled the crew cab off sight in Louisville and shipped the bare metal cab to Kentucky Truck Plant to paint and trim out. I worked at the plant that welded it together in 1992.
They have since the 60s
This truck was never sold by ford as a crew cab in the f superduty format
A company called centurion made it a crew cab in Michigan then a company called quigiley in PA converted it to 4x4
Awesome choice on the colour. When you mentioned total cost i figured around 30 G. for a frame off respray. Very impressive work from all of you for getting as far as you all did in a week. Thank you for sharing this adventure of a project, and i hope your 2 sons learned a thing or two about a thing or two on appreciating hard work like that. Superb job guys! Can wait to see what it looks like when its all complete and the sun shines on it.
Thanks 👍
You have no idea what a pleasure it is to watch you and the family working together on projects. Coming together nicely, thanks for the update sir.
Thank you very much!
the truck looking good
That blue is so much better than that charcoal that was on it lol. nice work. Surprised Kevin didn't revolt when you wanted to mix paint in the Christmas Cave lol.
How bout showing us more on that 4 door bronco? That's unique
That is a real nice job Clint
Good job,congratulacion from Brazil.
You can do my Ford next. I'm working on it, but it's slow going for me.
Looks really good. Cant wait to see it go back together gonna be too nice to use for work lol.
Wow Clint.... Wow.... Paint looks great.... Hard to believe that cost man....
I watch Retropower and Project Binky and you're up there in quality work. From dozers to fine body work. I am glad I found this channel! I know it takes a very long time to do bodywork and you do it right.👌👍
Welcome aboard!
This total rebuild change of cab is amazing. Great to watch the process. Good to see Hunter and Tucker putting in full effort - learning heaps.
Thanks 👍
Nice color😍😍😍😍
Turbo Kevin already missing X-mas 😢
Turboman's, Christmas Fortress of Solitude.
😛❤❤🦾🦴👍👍👍👍👍
We use A LOT of salt in the winter in Canada. I can hear my car rusting in the driveway.
Looking good!
nice job going to be a beautiful truck
I've been waiting !! Big smile on my face! l Here we go!! Keeping it real! Cheers!;-)!
On video that color looks like Indigo Blue. I like that color, Back in 2004, I special ordered a brand new Z71 in Indigo Blue.
This isn't a Show Truck. It's a Shop Truck, That he's going to show. It's not a Show Truck.
PLEASE ASK THE YOUNG LADS TO TAKE THEIR HANDS OUT OF THEIR POCKETS AND TO STOP SLOUCHING AROUND THE WORKSHOPS; it looks so unprofessionable and they lacking interest.
Looking really good 👍
Thanks 👍
You can do it.!!!!! Love the video.
I love that color Clint. It’s beautiful. But that color would look good on anything even a Darn Old Ford. LOL. It’s going to look great.. Happy New Year to you and your family.
Buy the truck for $5k then add the $27k that you'd charge and you're still paying half the cost of a new truck.
Thanks for the memories, i started working with my dad at age of 8 in his bodyshop kinda like your sons , i sold it 40 years later, hard work, but lord we had fun .✌️
Since it's blue and it came from Canada, I'd call it blue ball. Checkout Quick Dici McDick for the reference.
da with 320- then paint/bas coat, clear with ppg,sand and buff
Can't wait to see the finished track. Merry Christmas to you too.
We used DP-40 & DP-48 at the body shop at Walt Disney World Florida I work at the shop almost 12yrs then transferred to Magic Kingdom Word their about 16yrs as a maintenance mini auto body shop and building paint We also used 2 part urethane paint on the building structure below 8 feet and below The company wanted to have 95 percent perfect work to be performed
That vp2050 is good stuff
Love your outlook on your work. Any job worth doing is worth doing well. ❤
👌🤓
You and your boys are privilaged: you to have young men to bond with, them to have you passing on to them... What I would have done to have my dad teach me?
You got a hell of an eye cuz I couldn't see any defects in the metal on my 7" screen! 😉 Thanks for the in-depth video and giving us some perspective on what a project like this costs. Glad to see your boys jumping in to learn and help.
That paint is nice. Sort of looks like a Ford color called Moonlight Blue Metallic. Ford had some nice colors in the 90's.
Great work Clinton. I have done some of this work myself and understand everything you were trying to get across. Very curious what did you do about your VIN number When you changed cabs. Thanks Buddy happy new year.
If you tint the primer blue the blue color coat covers better.