ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก

Can't Spray Your Car's Windshield? Diagnose Broken Washer Nozzles

แชร์
ฝัง
  • เผยแพร่เมื่อ 19 ส.ค. 2024

ความคิดเห็น • 102

  • @1AAuto
    @1AAuto  3 ปีที่แล้ว +8

    √ *Watch the Video*
    √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
    √ *Do it Yourself*
    √ *Save Money*

  • @elishmittywerminghanjensen1264
    @elishmittywerminghanjensen1264 4 ปีที่แล้ว +28

    These new videos are VERY different from the older ones but just as informative. Great to see channels bumping up production quality.

    • @1AAuto
      @1AAuto  4 ปีที่แล้ว +1

      +Eli Shmittywerminghanjensen Thanks for watching!

  • @raphaelsanchez4797
    @raphaelsanchez4797 3 ปีที่แล้ว +13

    I really enjoy your energy and enthusiasm. You’re a natural in front of the camera and great video skills.

  • @irishuwould5185
    @irishuwould5185 2 ปีที่แล้ว +79

    I’m 40 and starting to get a weak stream, is there any way I can replace my nozzle?

    • @iiinixkiii2346
      @iiinixkiii2346 2 ปีที่แล้ว +6

      Lmao

    • @dallassmith8854
      @dallassmith8854 2 ปีที่แล้ว +8

      Can't do a new nozzle but you're gonna hate how they clear the blockage

    • @hattrick-df4bo
      @hattrick-df4bo ปีที่แล้ว +6

      Wait another 10, 20 years... That gets worse..... 😂 😛

    • @mohibelahi2189
      @mohibelahi2189 ปีที่แล้ว +2

      😂

    • @boblongmore907
      @boblongmore907 ปีที่แล้ว +2

      Yes, that happens to me too in the bedroom!

  • @locomike102
    @locomike102 2 ปีที่แล้ว +4

    Great example of the basic troubleshooting process that everyone needs to practice.

  • @sammyday3341
    @sammyday3341 ปีที่แล้ว +1

    Thank you. My fluid was non-antifreeze and while visiting KY the temp dropped to -5. The leak was obvious - a hose connection I snapped back in place with no problem. Then it still wasn’t flowing. The second leak was another pull-apart connection. This leak was the line running under the hood insulation which was easy to remove using a rivet puller. The line had pulled apart when it runs into the spray nozzles.

  • @funnyfarm5555
    @funnyfarm5555 5 หลายเดือนก่อน +1

    Just started diagnosing the washer issue on our 2007 ford explorer; Original problem; wife said no washer fluid. The problem is some kind of slimy gooey in the tank mess that won't let the pump work. Will finish fixing tomorrow. Earlier in the day after it sat for a while it had good pressure then went to weak stream.

  • @jeksentoqtarbay1302
    @jeksentoqtarbay1302 ปีที่แล้ว

    Thank you very much for helpful video. I have just watched your video and fixed my car. Saved money and time.

  • @barrybebenek8691
    @barrybebenek8691 3 ปีที่แล้ว +1

    This video is perfect for me. My ‘14 Ram 1500 (same gen as in the vid), developed the common “weak spray” problem over night. 🇨🇦👍🏼

    • @1AAuto
      @1AAuto  3 ปีที่แล้ว

      +Barry Bebenek Thanks for the feedback!

  • @jessesweet3689
    @jessesweet3689 3 ปีที่แล้ว +1

    Thanks for the video. Helped me with solving the low spray flow issue with my 2012 Mazda CX-5. Checked everything else before finally finding a messed up check valve. I drilled it out and all is well. I think the purpose of the check valve is to keep the line from draining back to the reservoir after use. Not critical but it is a nice feature. I ordered new check valve on Amazon and will replace. Thanks again for your efforts in making useful videos.

    • @1AAuto
      @1AAuto  3 ปีที่แล้ว

      +Jesse Sweet Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c

  • @frankh5790
    @frankh5790 3 ปีที่แล้ว +1

    this guy is awesome! thanks for all the videos!!! ... for all the things! 04 dodge 1500 here

  • @ianhill4585
    @ianhill4585 3 หลายเดือนก่อน

    A coworker had a works van that kept dumping the washer fluid, when I mentioned why they didn't top it off, as I occasionally had to use it( she was day work,I was night).She got snotty and said she did every day! I had a quick look, a feed pipe had become loose, the place I worked at was a motor trade based operation, a zip / cable tie from the stores fixed it in seconds.

  • @ZorroDaddy
    @ZorroDaddy 3 ปีที่แล้ว +1

    This problem happens a lot, 2 NEW RAM trucks same problems. Great video. Thanks

    • @1AAuto
      @1AAuto  3 ปีที่แล้ว

      +A. JAY Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

    • @ZorroDaddy
      @ZorroDaddy 2 ปีที่แล้ว

      @@1AAuto Thanks, so which Nozzle is best, them mopars break, clogs, don't work after a month. Thanks

  • @batusay1977
    @batusay1977 4 ปีที่แล้ว +1

    thanks for all the videos very Helping people..

  • @robertcroft2352
    @robertcroft2352 3 ปีที่แล้ว +2

    Great video. I have the same type issue with my Nissan.

  • @drivendesperado
    @drivendesperado 2 ปีที่แล้ว

    ONCE AGAIN, you guys saved my bacon on repair bills. Roll on, friends.

  • @judss365
    @judss365 3 ปีที่แล้ว +1

    Good explanation bro

  • @Ski-bd1rq
    @Ski-bd1rq 3 ปีที่แล้ว +1

    Thanks. Fixed my issue with low pressure.

  • @trevorfulton2628
    @trevorfulton2628 8 หลายเดือนก่อน

    I love this guy 😂

  • @markbenoit
    @markbenoit ปีที่แล้ว

    I worked on one had weak pressure I unhooked the hose where the hood hinge is and blew air into the washer pump tank it cleared some sledge that was blocking it and fixed the problem.

  • @Jesus7Freak1
    @Jesus7Freak1 3 ปีที่แล้ว +3

    Freeze at 1:07 and the left sprayer is attached perfectly until he himself caused it to detach

    • @landonbrown8482
      @landonbrown8482 2 ปีที่แล้ว

      Everything in this video is now a lie.

  • @HillCountryPrepper
    @HillCountryPrepper 3 ปีที่แล้ว +1

    Very helpful and informative. Thanks

  • @sanchezgerardo7378
    @sanchezgerardo7378 ปีที่แล้ว

    I love these 1A Auto videos very informative and make things look easy. What would happen if someone goes to the point of trying to unclog it with drano liquid?

  • @racebannon5708
    @racebannon5708 ปีที่แล้ว

    Thank you gary

  • @ministerexharme
    @ministerexharme ปีที่แล้ว

    Sure love driving in the winter when salt gets kicked on to the windshield and sprayer doesnt work. Thanks for this.

  • @atiqkhan8865
    @atiqkhan8865 2 ปีที่แล้ว

    Good approach

  • @angelicanino3938
    @angelicanino3938 ปีที่แล้ว +1

    My nozzle only sprays with the hood open. I close the hood and only squirts a little water. What can it be?

  • @goolabawa4193
    @goolabawa4193 2 ปีที่แล้ว +1

    What causes the front hose on windsheild water reservior to come off? I can't use my windsheild washer?

  • @TomSnyder-gx5ru
    @TomSnyder-gx5ru 4 หลายเดือนก่อน

    Sometimes it's just calcium buildup from the water clogging the line, that's why I add a little vinegar to the reservoir once in awhile.

  • @randyowens2717
    @randyowens2717 4 ปีที่แล้ว +1

    Great video!

    • @1AAuto
      @1AAuto  4 ปีที่แล้ว

      +Randy Owens Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

  • @wishiknew1974
    @wishiknew1974 ปีที่แล้ว

    Buena inversión

  • @mostafa6944
    @mostafa6944 2 ปีที่แล้ว

    You made it so simple pro 👍

  • @marcoyongjing1129
    @marcoyongjing1129 2 ปีที่แล้ว

    Thank you mate

  • @mikagami69
    @mikagami69 ปีที่แล้ว

    Super-useful vid. Gonna go diagnose my... 'vehicurrrr' and fix it now. :p
    Thanks!

  • @oppsmadness3320
    @oppsmadness3320 2 ปีที่แล้ว +2

    No insect’s where hurt to make this video

  • @craigmcdonald7145
    @craigmcdonald7145 2 ปีที่แล้ว +1

    Is there a fliter on the line? I ran my fluid out, was working fine...refilled it and now its got almost no pressure. Seems like a clog, maybe sludge at the bottom of the resevoir - but you didnt go that far. 2016 Ram 1500

  • @ahmed198555
    @ahmed198555 4 ปีที่แล้ว

    VERY PROFESSIONAL

    • @1AAuto
      @1AAuto  4 ปีที่แล้ว

      +ahmed ALBADI Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

  • @oledarbyd586
    @oledarbyd586 3 ปีที่แล้ว

    Thank you so much for the help.

  • @OleGit1497
    @OleGit1497 3 หลายเดือนก่อน

    I have a Fit since new and had an issue with the washer fluid from day one. The dealer tried it and said it works as per normal. They do not listen to customers. I explained that the pressure is weak when driving over 60 kmh (40 mph) any time, and also is weak when it is cold outside. Washer fluid is rated for -40 C, so it is not an issue of freezing. I checked the pump and lines; all are good and clear. Any idea as the cause?

  • @SDsailor7
    @SDsailor7 2 ปีที่แล้ว +1

    So where do i buy those plastic insulation holders that for sure are going to break?
    anyone know?
    Thank you

  • @debgurung1895
    @debgurung1895 3 ปีที่แล้ว

    Thanks for great advice

    • @1AAuto
      @1AAuto  3 ปีที่แล้ว

      +Deb Gurung Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

  • @raldogtm
    @raldogtm 3 ปีที่แล้ว

    Thanks!!!

  • @mowgli573
    @mowgli573 3 ปีที่แล้ว +1

    How about the rear wiper with a low pressure?

  • @demadim320
    @demadim320 2 ปีที่แล้ว

    Do you have any video like this for 09 Tahoe?
    Thanks

  • @raldogtm
    @raldogtm 3 ปีที่แล้ว

    Smashed the like button !

    • @1AAuto
      @1AAuto  3 ปีที่แล้ว

      +Raldo Maria Thanks for the support, its greatly appreciated! 1aauto.com

  • @jeffcuevas5918
    @jeffcuevas5918 4 ปีที่แล้ว +4

    Vericles.....

  • @CLH-hc8ce
    @CLH-hc8ce ปีที่แล้ว

    Clear and helpful, shows that this is not rocket science. If you had shown more slowly how you remove the nozzle, that would help. I gather that it just snaps in, with a little pressure.

  • @otsenres1636
    @otsenres1636 3 ปีที่แล้ว +3

    Might be a prostrate condition?

  • @mahmoudalshawi2010
    @mahmoudalshawi2010 4 ปีที่แล้ว

    Thanks...

    • @1AAuto
      @1AAuto  4 ปีที่แล้ว

      +Mahmoud Al Shawi Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

  • @moslem770
    @moslem770 4 ปีที่แล้ว +2

    My sprayer is broken and it is stuck inside the hose. Any tip on how to get it out?

    • @jimmyhanks215
      @jimmyhanks215 2 ปีที่แล้ว +1

      Screw small screw in and pull

  • @jondnz
    @jondnz 24 วันที่ผ่านมา

    My problem is, I can't even see the nozzle hole where the water should be coming out to hit the window. It's like that whole area has some kind of rubber plug right over it that I can't seem to move. Water does come out but it's not really going where I want it to go or it just seems to piddle out and flood around the nozzle area. Toyota Wish

  • @davidcolinstillman5585
    @davidcolinstillman5585 4 ปีที่แล้ว

    THANK YOU !
    ARE THERE NEW TYPE OF LINES OUT THERE TO REPLACE THE ONES THAT CAME WITH YOUR VEHICLE ? MY TRUCK IS 20 1/2 YEARS OLD & FORD SAYS THAT THEY DON'T CARRY THAT PART LIKE A BUNCH OF OTHER PARTS WHEN YOU NEED THEM. HAD TO GO TO A BUNCH OF AUTO PART STORES TO FIND & REPLACE THE PLASTIC ELBOWS / THE RIGHT INNER DIAMETER SO THEY WOULD FIT IN THE ORIGINAL HOSE & MAKE THE RIGHT PRESSURE TO SPRAY THE WINDSHIELD WASHER FLUID WHERE IT'S SUPPOSE TO GO/ GET / MOST OF THE TIME IT HAS ALL THE PRESSURE & SOMETIMES LESS , I GUESS THE TEMPERATURE HAS A LOT TO DO WITH THAT . PUT NEW WINDSHIELD WASHER PUMP IN , THE ORIGINAL ONE WAS STILL WORKING GOOD SO IT'S A SPARE .
    DO YOU HAVE ANY VIDEO ON 1999 XLT 4.6 L EXTENDED CAB DOORS REPLACING THE CABLES INSIDE THE DOOR SO YOU CAN OPEN / USE THE DOORS AGAIN ?
    THAT'S MY NEXT PROJECT BESIDES FINDING ALL NEW DOORS & TAILGATE . WORRY ABOUT THE TRUCK BED LATER .
    BE SAFE ! HAVE FUN ! HOPE YOU HAVE A GREAT YEAR ! GOD BLESS YOU ALWAYS ON YOUR JOURNEYS ! ENJOYED !

  • @guitarslinger3914
    @guitarslinger3914 3 ปีที่แล้ว

    Low flow on the washer jets?
    My BMW Z4 washer reservoir was full of dirty black gunk and the filters were almost blocked. Removed it, cleaned it, problem solved.

  • @googleplusisdead
    @googleplusisdead 4 ปีที่แล้ว +2

    Those are great squirters, fan spray covering whole windshield. My 2005 Prius has tiny holes that clog up. Any tips on how to not only clear them (I've used a single bristle from a handheld wire brush), and to get 'em aligned (they pivot on a ball)? That alignment has me pulling my hair out. I try to make a tiny adjustment and it goes too far, then back, and forth,etc. etc. etc.
    P.S. What's your take on youtube no longer sending emails when a video is posted??? Its the only way I get notification. No real reason to be subscribed without those emails, IMO.
    RichE San Diego, CA

  • @kevinrhodes6855
    @kevinrhodes6855 2 ปีที่แล้ว

    Pump works but the fluid is just leaking from under that cover under the hood. Pleas advise.

  • @goolabawa4193
    @goolabawa4193 2 ปีที่แล้ว

    Hi my washer was not spraying, I took the bottom off to see what was going on I saw the front hose from reservior was off so I put it back and filled reservior and when started pum the same front hose came off and no spray!!! What is causing this hose to come off "builds pressure"? Is it plugged lines, jets or what? Please help me.
    Thanks

  • @Jesus7Freak1
    @Jesus7Freak1 3 ปีที่แล้ว +5

    At 1:08 the left side was attached just fine until you started pulling on the entire assembly.. then you said well this wasn't even attached lol when you detached it yourself .. See when "mechanics" create problems then call you and say well this wasn't attached and give you a 800$ bill

  • @joegardiner4220
    @joegardiner4220 3 ปีที่แล้ว +2

    Collection receptacle....okay

  • @JBBI2011
    @JBBI2011 2 ปีที่แล้ว

    I was hoping to get the type of nozzles that my 2008 pathfinder uses since I need to replace them. My pathfinder nozzles are cracked.

    • @1AAuto
      @1AAuto  2 ปีที่แล้ว

      +Belinda Lynch Thanks for checking us out. Shop for high quality auto parts on 1AAuto.com:
      1aau.to/m/Shop-1AAuto-c

  • @zairemccarthy8591
    @zairemccarthy8591 3 ปีที่แล้ว

    How to replace/rep the hose from pump to the nozzles?

  • @pirihern9329
    @pirihern9329 4 ปีที่แล้ว

    Low pressure. No blockage. Replaced windshield washer pump still not much pressure slightly better. Will all thanks

    • @1AAuto
      @1AAuto  4 ปีที่แล้ว

      +Piri Hern Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

  • @user-fj8dp6ed6x
    @user-fj8dp6ed6x ปีที่แล้ว

    2017 hyundai, 23,000 miles. Ran out of washer fluid. Filled container, nothing coming out. Mechanic said the nozzle on Pass. side was bad. Replaced it with nozzle from dealer. $180.00 bill. Picked up car, spray on driver side was weak then stopped working altogether. So Pass. side and back wiper and spray work. Took car back to mechanic they said everything worked right when done. Left car again to find out why. Received call it could be fixed for another $70.00. No explanation why even the low pressure stopped working. Told mechanic no, I was picking up my car. My keys were waiting for me on their counter.

  • @allyblackburn3201
    @allyblackburn3201 3 ปีที่แล้ว

    Do u know anything about dodge chargers hose when it sprayed on hood or inside hood I need help with 2019 dodge charger car plz I have a baby need transportation and way to see with the windshield fluid and hose it’s showing the liquid dripping from the inside of the hood showing the hose isn’t connected anymore idk how to connect it back

  • @kennethberryhill467
    @kennethberryhill467 2 ปีที่แล้ว

    I have a 2014 Nissan frontier SV pickup and the windshield washer fluid will not spray

  • @goolabawa4193
    @goolabawa4193 2 ปีที่แล้ว

    My car is Hyundai Santa Fe 2005.

  • @StormLaker
    @StormLaker 10 หลายเดือนก่อน

    So what if you've done this, used compressed air on your lines, replaced the resevoir pump and you're still not getting enough pressure.......replace all the hose and look for a more powerful pump? I swear Ford under engineers the washer pumps in their vehicles, lol. My 2003 F150 has really weak flow, I'm about to just build my own setup so I can get enough pressure to the windshield for winter driving.

  • @jimmys7865
    @jimmys7865 2 ปีที่แล้ว

    That dude's to happy like he got hit by a ice cream truck or something

  • @Theiliteritesbian
    @Theiliteritesbian 2 ปีที่แล้ว

    Make sure its facing in the right direction? Wtf... silence is golden

  • @bl8danjil
    @bl8danjil 4 ปีที่แล้ว

    What about the rear windshield nozzle on a 2006 Toyota Matrix. It just comes out in a stream instead of a spray. I'm not sure if that is normal. The front two nozzles seem okay.

    • @seanguy9720
      @seanguy9720 4 ปีที่แล้ว

      Rear wipers are usually a stream

    • @1AAuto
      @1AAuto  4 ปีที่แล้ว

      +Sean Guy Thanks for the feedback!

  • @nickr3441
    @nickr3441 4 ปีที่แล้ว +2

    Dodge, what else is new

  • @zanethanbrowning3154
    @zanethanbrowning3154 2 ปีที่แล้ว +1

    Buddy relax. You're freakin everybody out

  • @sjllee2588
    @sjllee2588 4 ปีที่แล้ว

    👍👍

    • @1AAuto
      @1AAuto  4 ปีที่แล้ว

      +John L Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

  • @sugawolf7
    @sugawolf7 3 ปีที่แล้ว

    What’s that forky tool called??

    • @kevinnsales592
      @kevinnsales592 3 ปีที่แล้ว

      It's called a Clip Remover Tool.

  • @baims8367
    @baims8367 7 หลายเดือนก่อน

    😂 what are those 😂
    👉🏻👓🤓

  • @salvadorgutierrezr5914
    @salvadorgutierrezr5914 4 ปีที่แล้ว

    👍👍👍👍👍👍👍👍👍🙏👌✌

    • @1AAuto
      @1AAuto  4 ปีที่แล้ว +1

      +Salvador Gutierrezr Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c