Bought the exact same model about 3 weeks ago from Tractor Supply. Mine came with hour meter. First thing I did was putting mulching kit on it and it performs fantastic, leaving some of the finest clippings I’ve ever seen and not spreading anything from a chute due to a plug in that comes with a kit. Agree with you on all points - I think Cub Cadet made a very well balanced garden tractor with everything I wanted to see in a tractor and nothing extra.
I bought the XT2 LX 42" with the fabricated deck, 20 hp, arm rests, front bumper,and hour meter. I absolutely love it. You should get the front bumper kit.
@georei I ended up getting one it looks better, and I like having some protection in front. I agree great mower I have about a whole season on mine now and love it.
I have a 2003 Cub Cadet 1525. It looks and runs like new still. But every year, something breaks on it. So maybe it's time for a new one. That's XT1 LT50 looks like something I could use. Great video
Nice! I purchased that exact mower and it's coming in 2-3 weeks. I also bought a bagger for it, as I didn't have a bagger for my JD. My JD L111 I bought in 2005 for my FLAT 1 acre, is on its last legs. Fuel pump, a battery, steering gear assy., steering arm assy. on right side, 42" deck support arm cracked at weld to deck and was rewelded, were all the individual issues I had with the L110. I did all the repairs myself. I also pulled a 40" Brinley core aerator annually for last 9 years with it. Still not bad for almost twenty years on it. I also pulled many 400lb. loads of landscape rock when I first purchased it. The Tuff Torq40 transmission in my JD is similar to the Tuff Torq46 in the LT50. They will last if you follow a few rules. DON'T pull heavy loads(aerator/LS rock) in high heat or on hills. REMOVE deck when pulling loads with it. Keep trans cool by blowing debris from the trans case and cooling fins after EVERY use. I never washed the JD in 19 years, just blew her off with the leaf blower in the yard. The deck will be removed and cleaned and stored for backup use. She'll be relegated to pulling the aerator and dump trailer. FYI: I have read that some people are experiencing failed spindle bearings on Cub Cadets with the deck wash system. It is rumored to be caused by not allowing the blade spindle bearings to cool prior to using the wash system. I guess the heat of the spindle bearing will pull moisture into the bearing through the seal when hot.
Thanks for letting me know about the spindle issue and I agree I always blow all the grass off after I am done mowing and think that helps a lot. I read about the new S type key for the blades on the XT Series, which apparently makes both the blades and spindles a little pricier. But upon further investigation, I found a kit including 3 star type spindles and three new blades for $120, so I'm not too concerned about losing a spindle now. When I compared options, deck quality, and price between brands, Cub Cadet seemed far superior to me.
@@TheElectronManLike you, I purchased the yellow front bumper for my LT50, and the mower hasn't even arrived yet. And like you I also bent my front exhaust, and I also cracked the front hood of my JD L111. So, for only 46 Federal Rubber Notes I felt I needed it. Mind telling where you found the star spindles that fit the 50" Fab deck?
Hello Mr. Man. My wife and I both kinda chuckled when you mentioned your old mower was a whopping 7 years old. Around here it's more like 17 years before one goes into the weedpatch. Couldn't help but notice your yellow ride this morning. Got one for myself about the same time you did. I just changed the 5 hour oil in it. You mentioned that your LT50 doesn't have an hour meter. Did you find it? Not much of one, but it's rat under steering column. Need close up glasses just to find it. Also, the next thing I did after mine arrived in a box was to order the yellow bumper. I like it a lot. My LT50 replaces my old hand-me-down Craftsman 16.5HP museum relic. No automatic nothing on it. Here's the deal...it actually had a smoother ride if you can believe that. My new CC finds every bump in the yard and transfers the bump energy straight up my spine. Uncanny! Else, while I can't say that I look forward to my acre....cutting is actually kinda fun again. I use my leaf blower on it after every session. And I shave a third the time off my old 42" Sears machine too. So good to see you. Lastly, a suggestion. You can cut a good bit of yard cutting time completely out if you'll install somewhere in the neighborhood of a 60x50' garden right in the middle of your back 40. Works for me! See ya!
Yeah, you’re right about the 7 years. I have one that’s about 20 years old now; that one is in the weed patch. However, the Craftsman Pro is still going. In fact, I’m getting ready to do a service on it: oil change, spark plugs, new air filter, etc. I’m thinking about selling it, actually. I’m building quite a lawnmower fleet over here, LOL. The Pro has a 42" deck, and this new CC with a 50" deck makes a big difference with all the maintenance around here. I like keeping them fresh because after a couple of weeks without mowing, the grass gets out of control. Interestingly, it seems it’s a mixed bag on the hour meters-some have them, some don’t. Not sure why. I did some checking, and mine is all wired for it, just doesn’t have the meter. They are about $75.00, and I’m tempted to put one in. I’ve had several gardens over the years, and you’re right-it’s a more efficient use of the land. It’s too late this year, but maybe next year, I’ll take on another garden. I’m surprised you say it’s bumpier; mine seems smoother. I wonder if your tire pressure is too high-that can make a difference. Anyway, thanks for the comments and happy mowing!
@@TheElectronMan Hey, I will surely check the tires. I have not done that. Thanks for the suggestion. Looking forward to you having ALL the fun and clear sailing with your new lawnmower! (If it were me I'd at least try to get in touch with customer service about that hour meter before buying one. Couldn't hurt.) Good hearing from you! Your bestest fan in Alabam, Norm
@@TheElectronMan Back atcha Mr. Man. Just got back from the yard. After exchanging my wagon wheels for pewmatic tires, it do seem to make a difference. The back tires take 10;b of air and both were at nearly 30. Front tires weren't much better. After I set the pressure right I went to some of my frowziest yard for the test and sure enough it did seem to take some of the sharp out of the jounce. So....ya done good!!! I sure missed that one. Thanks 50 times!!! Norm
for the money Cubs are good. I've got an xt1 50 inch cut with 250 hrs on..only issue is I need to install a throttle control lever..mine is sticking but other that that it runs great. Cub push mower is also been a good purchase.
Looking at this same one, for pretty much all the reasons you mention: uneven terrain, rough, electric PTO, fabricated deck, a little wary of the Zero Turns, and fit and finish seems nicer than the comparably-priced John Deeres.
I agree and I am really happy with my choice I looked at John Deere's but I didn't see the justification on the price seems like it was premium just because of it's name not options or quality.
The first garden tractor we had was a Craftsman GT6000 with the Onan 18HP Twin cylinder horizontal shaft engine, 3 speed spicer transaxle with 2 ranges, and 44" mower deck....that thing mowed our 2 acre property for 21 years before the internal engine components decided to part ways with each other :(. It was replaced with a Craftsman YT4000 lawn tractor...it had the Briggs & Stratton 24HP Twin engine, and 42" mower deck....biggest pile of junk managed to get 7 years out of it before the engine threw a rod. The Cub Cadet XT1 42" with the Kohler 18HP single cylinder engine replaced the YT4000...good lawn tractor, my uncle has it now though, but it seemed to have better power than that YT4000's supposed 24HP engine...I ran the Cub Cadet 44" 3 stage snow blower a few times and it had plenty of power to run it, I had the rear weight bracket and tire chains for it. I had the mulching kit installed on my XT1, it mulched leaves extremely well, I had the Gator G5 mulching blades (not the Cub Cadet blades), plus the mulch plug and it did great, mulched the grass most of the year, except the first few cuttings in the spring when the grass was thick and heavy. It's cut quality was great, and if my uncle didn't need a mower I'd still have it LOL. If I replace my XT1, I may get a zero turn as I have a sub-compact tractor so I just need something to mow with so I don't have to install the 60" mid mount deck on my tractor all the time LOL. A fabricated deck is a good way to go....better built, easy to repair, and lasts a lot longer than those paper thin stamped decks. The fabricated decks are heavier too.
You sound like me. I started years ago with Craftsman and have had at least five over the last 30 years. I had a real dog, the L2000, I think they called it. It had a Kohler 42" 18HP single-cylinder engine that developed a rod knock after five years. I also had a 20HP Briggs model that lasted about seven years but went through two decks and multiple spindles. Then I bought a Craftsman Pro series, which is still going strong, though I found out it was just a rebranded Cub Cadet. In fact, the steering wheel has a Cub symbol on it. The only issues it has had are with the spindles and deck, but it's one of the best mowers I've ever had. That’s why I went full-blown Cub Cadet this time. The fabricated deck was the selling point, as I have an Ariens 52" Zero Turn with a fab deck that has been through rough stuff without any deck problems. Its only issue is that it eats blade belts. I like having both. I can tell you the Zero Turns are great for flat areas, but they ride rough and are terrible on uneven terrain. I usually use the Zero Turn for my back area, which is smoother and flat, and the rider for all around the house and the uneven area in front. When you have acreage, you need dependable mowers. A broken-down mower around here for a couple of weeks means the grass gets out of control.
We bought one, got it in and when the delivery driver unloaded it he had started it and the owners Manuel was on top the engine and ruined the fan that cools motor. Tsc sent a replacement and the replacement was the excact same mower but it did have the hour meter. I had read in reviews before buying some had and some didn’t. I had bought a aftermarket hour meter hour meter that I’ll just use on something else was a amazon special at 10 bucks simple hook up just wrap around the plug wire.
Hey, its a bumblebee, no honestly though the first and last cub cadet i owned the hydro pump went out on it and said i would never own another one, i will use one of needed but would buy one. I like the Kohler motors but prefer kawasaki as i have had better luck with them but its different for everyone. Nice looking mower and glad to see they are putting a good deck on these now
I was also disappointed mine didn't come with an hour meter either. But if you have a local Cub Cadet Dealer near you, You can go buy one. They're like $65 and easy to install.
Good to see Kohler engines are back, the pandemic caused a back order on their engines. Kawasaki engines were available, and they are on a lot of 2023 mowers. Nothing wrong with Kawasaki except a little more costly on filters and service items in general. The Briggs 25hp engine is a good one IF you blow the grass off the heads and cooling fins after each mow. If not it will slip an exhaust valve guide on the left head at some point in life. I've seen the pushrod fall into the timing gears many times. I have never been a fan of the deck wash system, and blow decks off with a long reach blow gun. Under deck as well. Congrats on your new mower! We have a '99 Cadet 2140 AGS, it's still in great shape with 1200 hours. It's retired now, cut great just too slow.
Thank you and I am with you I prefer to just us my air compressor to clean my mower after I mow, to me the deck wash which just adds unnecessary water to the mower deck components.
I am a big guy like you. The problem I always have is that many of these mowers the seats are too close to the steering wheel. Does the seat move back far enough where your belly is almost up against the steering wheel and your legs don't feel like they cramped and are not comfortable?
Got mine about the same time as Mr. Man here. I can say this much...the seat is adjustable, backards and foards..... I'm not a teeny guy either and the front to back is dandy for me.
I've experienced some issues with the fabricated 50" deck bottoming out in the edges on small humps and hills, the workaround being just to raise the deck and then lower it again once you get over the hump. Not a huge deal but so far mine has been pretty great
Just bought one yesterday (June 13, 2024) and haven't used mine yet. I am coming from a 13 year old John Deere - 2 decks and plenty of spindle replacements. I passed on the John Deere because my neighbor has new one and always in the shop. Not what they used to be. Anyway, got the cub and in addition to the hour meter missing, I can't understand, at this price point, why they didn't add a front bumper. Anyway, new subscriber and appreciate your videos.
@@TheElectronMan The differences in quality of the decks are like night and day. I had no idea until I watched your video. I think I made the right choice, time will tell. I got mine at TSC too (on a whim) and ended up buying it. They let me use a free rental trailer too.
@@TheFishingStation I did the same thing just went over to TSC to window shop and walked out with one crazy thing I bought it on a Sunday and they came out about 3 hours later with it and did it for free. The deck like you said is night and day that was my weakest point on my last one. I have already put about 20 hours on this new one and it continues to impress me...
@@anthonybrincefield2812 I did try battery tender on my first battery . That is why they replace it under warranty, plus there are no where mentioned to used a charger during the off season. The warranty book doesn’t even mention that. The place on the mower for the battery is so small that cannot even use a regular 12 volt mower battery, if in large the box and use a regular 12 volt battery which will void the warranty on the mover. It is just a screw up on design by MTD.
@waylove04 hum make sure you are moving forward it will cut off if you go in reverse unless you turn the key to reverse mode and push the yellow button. Also, it will cut off if you are not sitting on it as it has a safety interlock, so you can't turn blades on while not on it.
How does it mow the grass most of these Cubs I see end up with a lot of grass on top of the deck.. because the vacuum is no good.. my experience is they don't cut the grass completely they cut like a brush hog . The two blade is just terrible.. every time I mow my lawn I just hate it.. there's nothing you can do about it.. except for buy a John Deere to get revenge
Wasn't easy for me either but the option is either I keep good mowers to mow my place or hire someone which honestly there is no way that would be less expensive.
It has the new S type spindles but they are really no different than the older star versions meaning that you can use either, same size and hole spacing the only difference is the blade type you have to use on the hub.
@@WatchMan1962 Honestly I don't know for sure as I have had some people swear they are and others say they are not. From my experience they are solid tractors much better than what I would categorize as a MTD but that is just me I guess
@WatchMan1962 seems most of the ones sold at Tractor Supply and Home Depot don't but others do, which is strange it must have been a special priced series.
I just ordered mine and hope to see it in a week or so special purchase home depot $2399 and a fabracated deck? , replacing Husqvarna v22/46 2015 model 280 hours stamped deck and poor parts availablity even online. 9 years so close to the 10 year lifetime before sold as scrap metal. Rather work on a MTD product anyday as everything will need service sometime, dont need a mechanics advice on what they like or how much they can make on a repair. Not my problem.
Wow you got a great deal that is 250 less than I paid for mine and I got mine on sale. I am loving mine it is a beast and makes my lawn look like a golf course..
Wow I guess they all have lemons the couple Cub's that I have owned have been real work horses with minimum issues, wished I could say that about my 5K Ariens Zero Turn...
You got bumble bee from transformers i love it 👍
Bought the exact same model about 3 weeks ago from Tractor Supply. Mine came with hour meter. First thing I did was putting mulching kit on it and it performs fantastic, leaving some of the finest clippings I’ve ever seen and not spreading anything from a chute due to a plug in that comes with a kit.
Agree with you on all points - I think Cub Cadet made a very well balanced garden tractor with everything I wanted to see in a tractor and nothing extra.
That's crazy same place I bought mine, but mine doesn't have an hour meter strange. Yes I agree I just got off mine it's a beast I really like it...
@@TheElectronMan Same here. I bought mine today and it didn't have the hour meter either. Can you install one without cutting into wires?
@OhioCarl from what I have read the wires are all there just missing the meter.
$45 at Cub dealer. Plug and play.
Love my LT 50.
this is the mower I got this season
I bought the XT2 LX 42" with the fabricated deck, 20 hp, arm rests, front bumper,and hour meter. I absolutely love it. You should get the front bumper kit.
@georei I ended up getting one it looks better, and I like having some protection in front. I agree great mower I have about a whole season on mine now and love it.
Excellent review; very much appreciated the detail and showing it cut.
Thanks for watching!
I have a 2003 Cub Cadet 1525. It looks and runs like new still. But every year, something breaks on it. So maybe it's time for a new one. That's XT1 LT50 looks like something I could use. Great video
Go for it!
I have a Troy Bilt Bronco and installed an hour meter when I first bought it. They are ~ $10 on Amazon and pretty easy to install.
Nice! I purchased that exact mower and it's coming in 2-3 weeks. I also bought a bagger for it, as I didn't have a bagger for my JD. My JD L111 I bought in 2005 for my FLAT 1 acre, is on its last legs. Fuel pump, a battery, steering gear assy., steering arm assy. on right side, 42" deck support arm cracked at weld to deck and was rewelded, were all the individual issues I had with the L110. I did all the repairs myself. I also pulled a 40" Brinley core aerator annually for last 9 years with it. Still not bad for almost twenty years on it. I also pulled many 400lb. loads of landscape rock when I first purchased it.
The Tuff Torq40 transmission in my JD is similar to the Tuff Torq46 in the LT50. They will last if you follow a few rules. DON'T pull heavy loads(aerator/LS rock) in high heat or on hills. REMOVE deck when pulling loads with it. Keep trans cool by blowing debris from the trans case and cooling fins after EVERY use. I never washed the JD in 19 years, just blew her off with the leaf blower in the yard. The deck will be removed and cleaned and stored for backup use. She'll be relegated to pulling the aerator and dump trailer.
FYI: I have read that some people are experiencing failed spindle bearings on Cub Cadets with the deck wash system. It is rumored to be caused by not allowing the blade spindle bearings to cool prior to using the wash system. I guess the heat of the spindle bearing will pull moisture into the bearing through the seal when hot.
Thanks for letting me know about the spindle issue and I agree I always blow all the grass off after I am done mowing and think that helps a lot. I read about the new S type key for the blades on the XT Series, which apparently makes both the blades and spindles a little pricier. But upon further investigation, I found a kit including 3 star type spindles and three new blades for $120, so I'm not too concerned about losing a spindle now. When I compared options, deck quality, and price between brands, Cub Cadet seemed far superior to me.
@@TheElectronManLike you, I purchased the yellow front bumper for my LT50, and the mower hasn't even arrived yet. And like you I also bent my front exhaust, and I also cracked the front hood of my JD L111. So, for only 46 Federal Rubber Notes I felt I needed it. Mind telling where you found the star spindles that fit the 50" Fab deck?
Hello Mr. Man. My wife and I both kinda chuckled when you mentioned your old mower was a whopping 7 years old. Around here it's more like 17 years before one goes into the weedpatch. Couldn't help but notice your yellow ride this morning. Got one for myself about the same time you did. I just changed the 5 hour oil in it. You mentioned that your LT50 doesn't have an hour meter. Did you find it? Not much of one, but it's rat under steering column. Need close up glasses just to find it. Also, the next thing I did after mine arrived in a box was to order the yellow bumper. I like it a lot.
My LT50 replaces my old hand-me-down Craftsman 16.5HP museum relic. No automatic nothing on it. Here's the deal...it actually had a smoother ride if you can believe that. My new CC finds every bump in the yard and transfers the bump energy straight up my spine. Uncanny! Else, while I can't say that I look forward to my acre....cutting is actually kinda fun again. I use my leaf blower on it after every session. And I shave a third the time off my old 42" Sears machine too. So good to see you. Lastly, a suggestion. You can cut a good bit of yard cutting time completely out if you'll install somewhere in the neighborhood of a 60x50' garden right in the middle of your back 40. Works for me! See ya!
Yeah, you’re right about the 7 years. I have one that’s about 20 years old now; that one is in the weed patch. However, the Craftsman Pro is still going. In fact, I’m getting ready to do a service on it: oil change, spark plugs, new air filter, etc.
I’m thinking about selling it, actually. I’m building quite a lawnmower fleet over here, LOL. The Pro has a 42" deck, and this new CC with a 50" deck makes a big difference with all the maintenance around here. I like keeping them fresh because after a couple of weeks without mowing, the grass gets out of control.
Interestingly, it seems it’s a mixed bag on the hour meters-some have them, some don’t. Not sure why. I did some checking, and mine is all wired for it, just doesn’t have the meter. They are about $75.00, and I’m tempted to put one in.
I’ve had several gardens over the years, and you’re right-it’s a more efficient use of the land. It’s too late this year, but maybe next year, I’ll take on another garden. I’m surprised you say it’s bumpier; mine seems smoother. I wonder if your tire pressure is too high-that can make a difference.
Anyway, thanks for the comments and happy mowing!
@@TheElectronMan Hey, I will surely check the tires. I have not done that. Thanks for the suggestion. Looking forward to you having ALL the fun and clear sailing with your new lawnmower! (If it were me I'd at least try to get in touch with customer service about that hour meter before buying one. Couldn't hurt.) Good hearing from you!
Your bestest fan in Alabam,
Norm
@@TheElectronMan Back atcha Mr. Man. Just got back from the yard. After exchanging my wagon wheels for pewmatic tires, it do seem to make a difference. The back tires take 10;b of air and both were at nearly 30. Front tires weren't much better. After I set the pressure right I went to some of my frowziest yard for the test and sure enough it did seem to take some of the sharp out of the jounce. So....ya done good!!! I sure missed that one. Thanks 50 times!!!
Norm
@@OvGraphics No doubt glad to help you out.
for the money Cubs are good. I've got an xt1 50 inch cut with 250 hrs on..only issue is I need to install a throttle control lever..mine is sticking but other that that it runs great. Cub push mower is also been a good purchase.
I agree they are solid mowers I have had really good experience with them holding up well...
I've got this mower got the hour meter but not the manual choke I love it second season thanks for the video.
You got the old one
Right on
Looking at this same one, for pretty much all the reasons you mention: uneven terrain, rough, electric PTO, fabricated deck, a little wary of the Zero Turns, and fit and finish seems nicer than the comparably-priced John Deeres.
I agree and I am really happy with my choice I looked at John Deere's but I didn't see the justification on the price seems like it was premium just because of it's name not options or quality.
The first garden tractor we had was a Craftsman GT6000 with the Onan 18HP Twin cylinder horizontal shaft engine, 3 speed spicer transaxle with 2 ranges, and 44" mower deck....that thing mowed our 2 acre property for 21 years before the internal engine components decided to part ways with each other :(.
It was replaced with a Craftsman YT4000 lawn tractor...it had the Briggs & Stratton 24HP Twin engine, and 42" mower deck....biggest pile of junk managed to get 7 years out of it before the engine threw a rod.
The Cub Cadet XT1 42" with the Kohler 18HP single cylinder engine replaced the YT4000...good lawn tractor, my uncle has it now though, but it seemed to have better power than that YT4000's supposed 24HP engine...I ran the Cub Cadet 44" 3 stage snow blower a few times and it had plenty of power to run it, I had the rear weight bracket and tire chains for it. I had the mulching kit installed on my XT1, it mulched leaves extremely well, I had the Gator G5 mulching blades (not the Cub Cadet blades), plus the mulch plug and it did great, mulched the grass most of the year, except the first few cuttings in the spring when the grass was thick and heavy. It's cut quality was great, and if my uncle didn't need a mower I'd still have it LOL.
If I replace my XT1, I may get a zero turn as I have a sub-compact tractor so I just need something to mow with so I don't have to install the 60" mid mount deck on my tractor all the time LOL.
A fabricated deck is a good way to go....better built, easy to repair, and lasts a lot longer than those paper thin stamped decks. The fabricated decks are heavier too.
You sound like me. I started years ago with Craftsman and have had at least five over the last 30 years. I had a real dog, the L2000, I think they called it. It had a Kohler 42" 18HP single-cylinder engine that developed a rod knock after five years. I also had a 20HP Briggs model that lasted about seven years but went through two decks and multiple spindles.
Then I bought a Craftsman Pro series, which is still going strong, though I found out it was just a rebranded Cub Cadet. In fact, the steering wheel has a Cub symbol on it. The only issues it has had are with the spindles and deck, but it's one of the best mowers I've ever had. That’s why I went full-blown Cub Cadet this time. The fabricated deck was the selling point, as I have an Ariens 52" Zero Turn with a fab deck that has been through rough stuff without any deck problems. Its only issue is that it eats blade belts.
I like having both. I can tell you the Zero Turns are great for flat areas, but they ride rough and are terrible on uneven terrain. I usually use the Zero Turn for my back area, which is smoother and flat, and the rider for all around the house and the uneven area in front.
When you have acreage, you need dependable mowers. A broken-down mower around here for a couple of weeks means the grass gets out of control.
We bought one, got it in and when the delivery driver unloaded it he had started it and the owners Manuel was on top the engine and ruined the fan that cools motor. Tsc sent a replacement and the replacement was the excact same mower but it did have the hour meter. I had read in reviews before buying some had and some didn’t. I had bought a aftermarket hour meter hour meter that I’ll just use on something else was a amazon special at 10 bucks simple hook up just wrap around the plug wire.
Hey, its a bumblebee, no honestly though the first and last cub cadet i owned the hydro pump went out on it and said i would never own another one, i will use one of needed but would buy one. I like the Kohler motors but prefer kawasaki as i have had better luck with them but its different for everyone. Nice looking mower and glad to see they are putting a good deck on these now
Lol, I like that bumblebee. Yeah, I like both motors, anything but a Briggs and yes glad to see Cub go to the fabricated decks.
Wish I had a neighbor like you to school me on my yeasu
I have the exact same mower however mine has a hour meter!
I just bought this 2 days ago. So far I love it. The reverse could be more responsive though. This is hard to find and a great deal.
Totally agree
I was also disappointed mine didn't come with an hour meter either. But if you have a local Cub Cadet Dealer near you, You can go buy one. They're like $65 and easy to install.
Thanks 👍🏾
Good to see Kohler engines are back, the pandemic caused a back order on their engines. Kawasaki engines were available, and they are on a lot of 2023 mowers. Nothing wrong with Kawasaki except a little more costly on filters and service items in general.
The Briggs 25hp engine is a good one IF you blow the grass off the heads and cooling fins after each mow. If not it will slip an exhaust valve guide on the left head at some point in life. I've seen the pushrod fall into the timing gears many times.
I have never been a fan of the deck wash system, and blow decks off with a long reach blow gun. Under deck as well.
Congrats on your new mower! We have a '99 Cadet 2140 AGS, it's still in great shape with 1200 hours. It's retired now, cut great just too slow.
Thank you and I am with you I prefer to just us my air compressor to clean my mower after I mow, to me the deck wash which just adds unnecessary water to the mower deck components.
I am a big guy like you. The problem I always have is that many of these mowers the seats are too close to the steering wheel. Does the seat move back far enough where your belly is almost up against the steering wheel and your legs don't feel like they cramped and are not comfortable?
Got mine about the same time as Mr. Man here. I can say this much...the seat is adjustable, backards and foards..... I'm not a teeny guy either and the front to back is dandy for me.
Yes it should fit I am big guy and I have lots of room...
appreciate the review... looking to get one of these while they are still on sale
I would grab it onsale while you can they are great mowers...
Nice mower my sister has the cubcadet xt1 42 she likes hers
Good mowers
I've experienced some issues with the fabricated 50" deck bottoming out in the edges on small humps and hills, the workaround being just to raise the deck and then lower it again once you get over the hump. Not a huge deal but so far mine has been pretty great
My zero turn was doing that the easy fix is to just lower you deck wheels than instead digging in it will just roll over it...
@@TheElectronMan that's fantastic advice, thank you.
@@oztinc Glad I was able to help out..
Just bought one yesterday (June 13, 2024) and haven't used mine yet. I am coming from a 13 year old John Deere - 2 decks and plenty of spindle replacements. I passed on the John Deere because my neighbor has new one and always in the shop. Not what they used to be. Anyway, got the cub and in addition to the hour meter missing, I can't understand, at this price point, why they didn't add a front bumper. Anyway, new subscriber and appreciate your videos.
Thank you and I agree they should have included the hour meter and bumper but still a really nice mower and the FAB deck is a big plus...
@@TheElectronMan The differences in quality of the decks are like night and day. I had no idea until I watched your video. I think I made the right choice, time will tell. I got mine at TSC too (on a whim) and ended up buying it. They let me use a free rental trailer too.
@@TheFishingStation I did the same thing just went over to TSC to window shop and walked out with one crazy thing I bought it on a Sunday and they came out about 3 hours later with it and did it for free. The deck like you said is night and day that was my weakest point on my last one. I have already put about 20 hours on this new one and it continues to impress me...
I have the same mover the AGM batter is weak, mine has a hour meter on it.I have already replace the AGM batter once in less than 50 hours
You paid a hefty price for the replacement too didn't ya? I have NO idea why YardMan loves those motorcycle batteries.
@@OvGraphics
No,the battery was under warrant for the 12 months
@@vafafarzaneh4815 Check out the replacement price outside of warranty.
AGM battery should last five years easy, use the correct charger for off season use occasionally and you will be fine. Probably just a bad one.
@@anthonybrincefield2812
I did try battery tender on my first battery . That is why they replace it under warranty, plus there are no where mentioned to used a charger during the off season. The warranty book doesn’t even mention that. The place on the mower for the battery is so small that cannot even use a regular 12 volt mower battery, if in large the box and use a regular 12 volt battery which will void the warranty on the mover. It is just a screw up on design by MTD.
Hi lift blades with the S center dont last. I only mow at 3 on the height. Need an alternative blade. Sand blades not much better..
I will go to mulching blades when these wear out, those are the ones I have best luck with...
How do ya engage the blades
It has an electric PTO switch on the dash you just pull it to engage the blades...
@@TheElectronMan it cuts out when I pull it up.
@waylove04 hum make sure you are moving forward it will cut off if you go in reverse unless you turn the key to reverse mode and push the yellow button. Also, it will cut off if you are not sitting on it as it has a safety interlock, so you can't turn blades on while not on it.
@TheElectronMan moving forward I will try that.
@@waylove04 If that doesn't work my guess is you have a bad interlock switch either on the pedal or the seat...
How does it mow the grass most of these Cubs I see end up with a lot of grass on top of the deck.. because the vacuum is no good.. my experience is they don't cut the grass completely they cut like a brush hog . The two blade is just terrible.. every time I mow my lawn I just hate it.. there's nothing you can do about it.. except for buy a John Deere to get revenge
It's a good cut for me and has a decent vacuum if you don't try to mow too tall of grass.
Tsc local $2799 for the 50" for the price i'm bout ready to get it. Which is sad when i can push mow my yard in less than 30 min.
That is the same price I paid been loving it and as for push mowing it, why when you can ride in style :)...
@@TheElectronMan Same price for me today. I missed the 0% APR by one day but got it at 2.9% so not bad.
@@OhioCarl Luckily I got the 0% APR which is what really sealed the deal for me but 2.9 is not bad..
I can window-shop all day every day without worry. My mind says yes, my wallet says no !!.😆😂
Wasn't easy for me either but the option is either I keep good mowers to mow my place or hire someone which honestly there is no way that would be less expensive.
MTD What spindles does the deck have?
It has the new S type spindles but they are really no different than the older star versions meaning that you can use either, same size and hole spacing the only difference is the blade type you have to use on the hub.
They aren’t MTD
@@WatchMan1962 Honestly I don't know for sure as I have had some people swear they are and others say they are not. From my experience they are solid tractors much better than what I would categorize as a MTD but that is just me I guess
@@blown503 what is this crap this woman is putting on TH-cam that says you’re not supposed to run straight gas in your riding lawnmower?
@WatchMan1962 are you kidding wow what put mix in it and foul the plugs no thanks now I do only put straight gas no ethanol in mine.
Mine has an hour meter
@WatchMan1962 seems most of the ones sold at Tractor Supply and Home Depot don't but others do, which is strange it must have been a special priced series.
I just ordered mine and hope to see it in a week or so special purchase home depot $2399 and a fabracated deck? , replacing Husqvarna v22/46 2015 model 280 hours stamped deck and poor parts availablity even online. 9 years so close to the 10 year lifetime before sold as scrap metal. Rather work on a MTD product anyday as everything will need service sometime, dont need a mechanics advice on what they like or how much they can make on a repair. Not my problem.
Wow you got a great deal that is 250 less than I paid for mine and I got mine on sale. I am loving mine it is a beast and makes my lawn look like a golf course..
I just ordered the same one yesterday from Home Depot for the same price sale ended last night
Hold on to your old mover, its much better than the new cub cadet
U cant even use. Regular battery on it due to small space
2022 cub cadet is piece junk keep throwing belt 5 times now battery dead has 10 hours on meter nothing but trouble
Wow I guess they all have lemons the couple Cub's that I have owned have been real work horses with minimum issues, wished I could say that about my 5K Ariens Zero Turn...