How To Replace The Battery On An Electric Bike Ebike
ฝัง
- เผยแพร่เมื่อ 30 ก.ย. 2024
- Here is how to replace the battery on an electric bike. If you have an E bike with a dead battery, and you want to replace the battery inside of the battery case, it is possible to buy a replacement battery and put it in your existing case. This can save you some money, and it is easy to do. A new battery in a case can cost $100 more then a new battery on its own. In this video I show you how to open up your battery case, disconnect the old battery, and connect the new battery to the charging case so that you will have your old ebike battery case with a new battery. Watch this video to learn how to DIY replace the battery in an E bike.
Here's an example of a battery for sale. Make sure you find the right size and voltage:
amzn.to/2BLsP0g
![[Live] ศึกมหึมันส์มวยไทยสังเวียนเดือด เวทีมวยชั่วคราวสวนสยาม | จันทร์ 30 กันยายน 2567](http://i.ytimg.com/vi/pM1k6f7JXUc/mqdefault.jpg)
So those eBay packs come with a BMS inside?
Without it those new batteries won’t last long at all folks.
Excellent How To Video without annoying music exactly what I wanted to see before I open mine up. Thankyou for sharing
You’re welcome.
make sure you get a battery with an actual charge port not a 'common port' which is super dangerous.
I purchased that same battery brand and I should warn you the charge port is the same as main power they use "common port" as the charge port is always live and if you accidently get anything that conducts electricity such as a drop of rain it will short circuit the battery exploding the charge port which has happened to me. It caused severe burns to my hand since it was near the charge port, splattered melted black charge port plastic all over the place. since there is no short-circuit protection on this battery or bms, it will explode or catch on fire. it took 8 or so seconds to burn through the live wires all over the connections until the wires just melted and stopped it from going up in flames. Just a word of caution. you maybe better off getting a battery with an actual charge port with a diode that stops accidental shorts from charge port.
I bought one 48v 20mah. It run fine for the first 25 miles with my 1000w kit. It still shows 2/5 bar before i charged it. The problem start from here. After finish charging, it no longer output voltage. Troubleshooting and open the whole thing out based on seller's instruction. No thing works. They sent new BMS but it did not help. They sent new battery as a replacemwnt but i had to pay $70 for shipping they claimed. It took almost 1 month to come. The big box finally arrived. It is the size of 5 batteries combine. The box got bitten up badly. No shipping foam or support materials in there. The battery probably bounced couple thousands time on the way. It got damage and scratches all over the place. Dusty as well. No more word to say. I dont think they want to do any business
Check your charger, fuse, and keyswitch.
Bms is no good.
*Works great my **Latest.Bike** I have a bad knee so I still get exercise but the bike assists me. I am a big guy so I didn’t think it would go as fast but it works great.*
I totally agree with other viewers; great video without annoying music. Many thanks for sharing your knowledge with us.
You’re welcome!
*I bought a case like this but the wires in the ignition key were so skinny I soldered some 12awg ones instead*
I would have cut the negative first solder. Then cut the red and solder. Avoid accidents
Thank you man. Ive just started my daily life of using ebike and got worried in the future where the battery goes out on me so I searched all over the internet where to buy the removable battery. No luck on anything because I didnt know the thing was only a casing and to replace it, you needed to change the actual battery inside. Thanks for shedding my worries away in the future man.
You’re welcome
I would have cut the negative first solder. Then cut the red and solder. Avoid accidents , but very informative
This all sounds good in theory, but how did it workout looking back 3 years later?
It still works.
Great Video. Could you have spliced the wires for the charging plug coming from the battery and used your old charger plug and charger or no?
Yes.
I'm looking to buy jetson j8 battery replacement, but no luck and look for diy on build battery pack myself, and looks for diy on dealing on the cable only...thanks for the informative videos like this.
How do you connect this to a custom electric bike, pls explain
Thanks a lot for this useful tutorial.. I have a similar battery with Alu case and lock/switch at top.. I need to replace the inner battery and I bought a proper size one at Aliexpress.. My question is: my new battery pack has in it (the manufacturer says) a Bms control.. The pack is wired as yours, cables for charging and cables for output current.. Hence, according to you my pack (with bms) can be connected just as yours? Do you think that my ebike can have another bms outside the battery? Thanks really a lot, Marco from Italy
That’s a good question. I don’t know the answer.
I just need help with a connection. If you got an email or something so I can send you pictures of the connections I have. Maybe and hopefully you can help me
Thank you, this will save me buying a whole new battery. 👍👍👍
You’re welcome
I would be a little concerned about the quality of the battery cells. Samsung, Panasonic or LG or unbranded Chinese rubbish.
Does the battery switch work?
Jeez, I’m not sure I’d want to put a knife anywhere near a lithium ion cell.
Thx for the valuable info , always has been a concern of how expensive a new battery is , only to find out I can save a lot of money just buying one without the case
You’re welcome. I made this video along time ago, and since then I’ve seen that there are companies online who will rebuild bike batteries with new cells for you. That’s probably a safer option than doing it yourself. But that being said, the bike still works great with the battery I put in it. And my house hasn’t burned down.
make sure you get a battery with an actual charge port not a 'common port' which is super dangerous
I wouldn't dick around with cheap batteries and risk my bike catching fire or blowing up.
Pretty dumb cutting adhesive under a lithium ion battery with sharps very dumb bro
w i t f would ever do this??? i cant even get the battery switched without sparks and smoke help me with a real problem
On top of ur battery there is a black plastic star screw what is it for please driving bananas it's a 5:11sec near end of vt
but what was the size of the battery pack? physical size and hom many Ah did you fit in it
Rubber cleaning gloves to prevent electrical shock
No bms on this?
Is there any way to repair a e-bike battery, some car batteries can be repaired but what about e-bike batteries. What will be the name of the company that I can ship a e-bike battery to be repaired. And it should be a way to ship a e-bike that to a company that can repair just about all e-bikes ?
Look around on the Internet for the bike battery rebuilders. I know that they exist. If your battery has screws in it that make it easy to take apart, it probably has standard sized cells in it that can be replaced.
I’m trying to find out how I can change the battery on a yamee fat bear from 48v to 52v and this helps so much I’ve heard I should also change the controller..is the processes some what the same just pop one for the other minus the changing of the metal case of course
It’s probably the same process. I can’t say for sure, but I think these are all pretty much the same. You should be able to wire the new battery into the old controller.
This was great but you breezed over the most important and dangerous part: Attaching the wires !!! All of a sudden the battery was wired up !! You had me up to that point because it was clear and concise
I was about to say the same thing! That's the whole reason why I clicked on the video.
If you can't work out that you bare the two cut wires and just solder them together to the original wires to the switch then insulate them, you shouldn't be doing this kind of job.
He literally explains what to do?
yea he spend the vidoe talkin about glue and tape...the guy is a moron thinking anyone gives a tuned in for that
😍Ideas 💡 be at best???. 👍🏾
How to connect 1000w to 500 w battery to create a 1500w battery and make a charger. Easy steps
Please help as not good on phone as like to see face to face but getting more difficult now and I'm a virgin etc. Cheers tee hee.
I find it’s the same price if I just buy the whole thing brand new
That’s possible. Most of the cost of these things is the batteries themselves. I’m sure prices have come down since I made this video as well.
I bought a new 36v battery got it today, problem is it only has 1 copnnector & a charging port Only .......my Old battery had 2 connectors.............. problem is without that 2nd wire hooked up the bike cant power up. .. seems Ancheer would make an adapter or the battery maker would or something.
I just bought another battery and it has 3 wires off the battery, pos & neg for power, 1 for the charger port, crazy thing is the second wire goes from the charger port to a fuse....i need help reconnecting this
⚠️ WARNING!!! ANCHEER WILL NOT HONOR ITS WARRANTIES!!! IF YOU INVEST IN THIS COMPANY YOU ARE ON YOUR!! WARNING!!! ⚠️
He was never seen again…
I also have a battery box like this on a fat tire bike and I think battery is coming to end of life its a 48v 15mah and I was wondering I'm thinking of putting a 750w motor wheel on it I was wondering wat kind of battery pack could I put in this box for max power and speed
30 dollars max is for the case... And stuff inside without battery, not so much...
Thank you very much for the explaining
You’re welcome
Most pathetic battery securing I've ever seen
Why
Who builds the caomm battery ? I can find them. But, I want a specific caomm battery. Because i know they are good.
I can replace a 48v lithium ion battery for e-bike with a 24v lifepo4 transformed
I've got the same unit. I see when you push the battery button one led is not lighting up. Is that usual? I'm also having issues with the removal of the battery, lots of goo. Battery is 4 years old, and when going uphill it just stops... So probably a new battery...
I need to change my Beach Cruiser Ignition & Battery Lock so this gives me a idea of what to expect
Hello sir
agood vid but, i have aluminum simuliar case ,but has a three pronge pc male connector ,female dc connector and a locking key switch . all new all unwired. how do it wire the new battery with different connectors to mate them together? thanks emily
They way you dropped the knife on the battery made me shxt my pants
That white glue is heat sink glue used in led bulbs. You can use caulking silicone sealants instead.
I don’t know what happened to my bike, the battery seems to be full but the bike doesn’t turn on
hahahah Pair of Pruning shears too funny, but hey it works!!!
Shrink wrap or insulation tape would of been better because it's made for heat as well as to cover. Gorilla tape might melt and fall off, boom.
Where do you find these battery and how do you know how to wire the new one ? Do you reccomend a repair company?
Thanks good videio. 5:25 did you just hit something :)
What a wonderful way to explode your bike
Can you please show me how to put back the key ignition on the battery cuz my battery key ignition switch came out
Do you know of any ebay ebike batteries that are good (brand names) ?
Excellent video. Easy to follow but the link brings you to Amazon and they're out. Any other sources and what is a reasonable price for a 36V 10amp hours block battery?
I know they sell a lot of these on eBay, but I don’t know which ones are better than others. If possible, you want to get Samsung cells.
didn't you put a fake cell battery in it?
Nice work!!! Thanks for sharing
You’re welcome
Hi I am looking for a charger for an iride 1016c electric bike any suggestions? It does not have a 3 pin adapter for the charging port. Or do you have any suggestions for batteries. The bike is discontinued. PS Thank you for this tutorial also
What was the sound of the soldering again?
Put some tape around the wires!!! Cowboy
Hi I have a battery like this and where u put the fuse the housing inside has broke clean off and it has made it so I can't reattach it I was wondering could I use a fuse clamp from a wall plug and put a rubber installation round it ?
You may be able to do that. I would be worried that it would vibrate loose. If you could solder it as well, that would be better.
Hy my electric bike windgoo battery 36v and 6AH can I use 48v battery
I think so. People say that most motors are built to handle either one.
I pulled the old battery out, it has positive and negative on both ends. The bottom has two prongs for connection. Top is for charge port and key. I don't see battery's sold with both negative/positive on both ends ?? Any advice
Check the BMS wiring instructions. You can add discharge wires from the top+BMS output, to the discharge port at the bottom of the case.
Can I put a 52v battery in my 48v case
My battery looks same as this one
❤
I'm trying to get mine out of the case 🤣
i did not know you can buy just the core ! whats the difference in price !?
Battery prices have come down a little bit since I bought my original battery, but a new one would be around $250 including the case and charger. If you just buy the blue battery, it’s $125. A battery with a charger costs $10 more. So I’d estimate the average savings between 100 and $125.
@@hoohoohoblin If thats the case, then why does your link show the Amazon rice at $269 ?
what did you do with your old battery?
Buy 10 amp cells. Minimum 6 usually Samsung 5.9. You have to be at or above 20 amp remember. You can jog faster than a 12 amp controller Lol that's 24v.great for 3 wheeler
What do you mean minimum 6 usually 5.9?
What is the name of battery type
Bike ka battery chahiye kya kahan se milega hamen
I'm dealing with an issue where my battery is good but the circuit inside fails, is there a way to hard worker the battery directly to the jumpers plugs on the bike?
Don't do it. You must use a BMS or it will be dangerous!
get that sodaing done lol.
Thank you for sharing it! Great information (and pretty useful too)
Instead of Gorilla tape you could put a bead of silicone sealant around the battery at each end. That would be easy enough to cut through if needed.
Thanks. That’s a better idea for sure.
Thanks for informative video. Looks a quite feasible job for an amateur.
You’re welcome
Just be careful of brands
I have an ancheer foldable with blue square battery 36v 8A... if I get a knock off battery will it ruin the motor on the bike...also how can I charge it out of the bike..thanks
Yes. It will still run the bike. Ideally, you probably want to buy a battery that is the same size and shape as the one you have now. This way you can just put it in the old ones box.
As long
as he has the volts and amp hours if it's a knock off the battery won't kill the motor..run
Beer maid gloves that's what you should have said smart guy
I mean rubber maid gloves
Can you tell me what a battery bag is ? I assume that for some, the idea to replace a battery and do what you did here is too much so they buy a replacement battery like you did then put them in a bag which they then strap to the battery rack ? But its not only cost. For my maker they went out of business so I'm stuck with a nearly new bike and a battery that was garbage. So of course, I want to just replace the battery guts and not the battery case. I will do what you did. Thank you again
You’re welcome. I would guess a battery bag is a fabric case that you can Velcro onto a luggage rack.
Battery bag is bag that holds your battery not a case
Hey can you help me plzz ive got 36v/10AH LITHIUM-10N BATTERY on my bike and its not working i think the cells need to change your way is much easier to rigenerate battery can you help where can i find the battery like your thank you im from italy
I am in the USA, and there are a lot of people selling them on eBay. In the ad, they will tell you the size of the battery and how much power is in it, so you just need to get one that’s the same dimensions as your original battery. I don’t know if they do international shipping, or if you look at eBay in Italy if there are any sellers in your country.
@@hoohoohoblin is that okay if i put the 36v 15 or 20 ah battery or its depend on motor of by cycle
work ok moped?
Can i replace my battery 48v 10.4ah with another 48v 13ah/16ah ?
My ebike is running about 25km ,i want to increase it to 35 km at least. Any idea if new different AH battery can harm controller or bike motor ?
That’s a good question. I’m not sure if there is a fuse in there that will shut it down if there’s too much power.
You can take a look at the products I found on Amazon：www.amazon.com/X-go-Battery-Lithium-Electric-48v/dp/B098XKXBTM/ref=sr_1_15?crid=1IBVZ5ENXJVGQ&dchild=1&keywords=x-go+ebike+battery&qid=1630034108&refresh=1&sprefix=x-go+%2Caps%2C1134&sr=8-15
As long as you are in the same voltage 48v 13 ah or 20 ah will work
You can definitely replace the battery with *larger* capacity. The controller and BMS limit the current. If you can fit 15 or 16 Ah in the case, don't bother with smaller.
@@mrtechie6810so it won’t make your bike faster / more power . I would like more speed and it doesn’t climb hills to well .. I have the maxfoc x-1 . It’s not a big issue but if there is a way to upgrade I would want to
Really helpful thank you
Nice work 💪 Keep more video's coming 📹
Thanks
I thought the battery comes with charger?
You can buy it with or without the charger. I bought it with the charger.
Can I use a solar panel to charge the battery?
I bet you could, but it would take a long time.
Ya hit the trifecta on this one. Bike update, repair steps, and a burnout.....You'll have a hard time topping this video!
Thanks. I hope this one helps a lot of people out. This makes replacing a burned-out battery on one of these bikes a lot cheaper.
Hello. Does the key stop you from sliding the battery out the case? Or?
The switch is connected to the battery with wires. The key pops a little pin in and out that can be used to lock the battery onto a bike rack. It doesn’t stop the battery from being slid out of the casing.
@@hoohoohoblin thanks just saw your reply. TH-cam does not send notifications. I bought it and connected it in parallel with my other battery I have 😊
You think in rainy days that cover will be enough for the charging port?
How did the cao mm battery work out ? Did it take you on longer distances than the original battery ?
Does somebody have an idea how to get off the white glue when its around a corner/on the underside of the battery?
You just have to use a thin knife or screwdriver and be careful not to cut into the battery. It’s rubbery silicone glue.
Same issue here, lots of goo....
Did you crash?! XD
This bike’s been crashed a few times. A cruiser with a coaster brake wasn’t designed to have 1000 W motor that can do 30 miles an hour on the front wheel. It’s lots of fun though!
How well does this battery work what is the range and what kind of ebike do you have?
It’s a generic eBike kit from eBay. It was about 30 miles on a charge. It’s a 48 V thousand watt kit.
How many amps is the battery. Range throttle or and pas? thx im 180 u
How did you connect the battery to the motor? did you have to make a hole through the box? I didn't see any plugs.
It has a plug, similar to the plug you would use on any appliance that plugs into a recessed socket in the battery box.
@@hoohoohoblin that plug is like a triangle, I cant find any connectors for it, could you help me out?
You connect the battery to the BMS and the BMS to the controller.
Thank you your no joke we drink 🍻
You’re welcome.
Thank you so much man
You’re welcome