Spektrum iX Setup: Start to Finish Tutorial - Dashboard and Model Adjust
ฝัง
- เผยแพร่เมื่อ 8 ธ.ค. 2022
- Step by step walk through of Dashboard and Model Adjust with IX Series Transmitters! Allows you to apply certain amounts of brake pressure like a full scale! If you're new to Spektrum or iX radios,after watching this video you will be prepared!
Spektrum iX14 Transmitter: (Affiliate Link)
bit.ly/3XiCEaT
Spektrum iX14 Owners Manual PDF:
www.horizonhobby.com/on/deman...
#SpektrumiX #Setup #Howto
Sir, I have long and strong technical background from technician to degreed engineer in electronics, nuclear reactor operation, mechanical, aeronautical arenas. I've performed education/training in most of those areas.
I have spent a lot of time watching Spektrum/Horizon Hobby created "educational videos" here on TH-cam. I did so because their, manuals from the very beginning, were obviously written by very informed , knowledgeable people who can't "teach" because everything to them is "intuitively obvious." They wave their hands, make some noise, then say read the manual if you want to know more. I have a new definition of frustration....
I've watched 3 videos of yours and have learned more than I have, in total, with the corporate blah, blah that know what their doing but can't tell you how to cross the street. You actually EXPLAIN. You can't cover every detail but what you have covered is actually understandable and, better yet, USABLE!!!
I know the effort it takes to put together the informative lessons that you put out and I have a deep appreciation of your investment of time.
THANK YOU!!!
Great feedback! Thanks so much!
Great video sir, you are the man when it comes to the spektrum transmitter,thank you for all the hard work you do for this channel.
Thanks for the support Glenn!
Watching your videos are a GREAT help to me getting back into a dramatically changed hobby. One video in particular saved me much agony mentioning there were TWO flight mode set-ups on my iX14
Glad to help!
Thanks for the time that you put on doing the tutorials, great information that is hard to find even in the Spectrum web page or the manual, I appreciate it.
Thanks Javiere!
I don’t have an ix14 but watch and learn through you in your videos about them. I have an nx8 and will one day upgrade to the ix14.
I like hearing that!
Love the video BD, now all that I need is the IX14! Thanks
Thanks Tracy! Use link in description if you decide to scoop one :)
Good video! Just got my 14 a couple days ago, loving it so far.
Awesome,glad to hear!
BD, would you consider doing a video from start to finish with this radio for something like a E-Flight viper or similar. I have been using a DX9 for years, and this radio has been rather confusing. I have watched all your videos, and wanted to say thanks for putting the effort, and clear communications into your videos !
Yes ill be doing that with others soon.
Awesome !!! i needed this help
Awesome willie! Thanks!
Great videos, keep up the great work
Thanks Donald!
@BD Tennessee when will you be doing more how to videos on the ix-14
I learn so much from your videos they are great
@@donaldjackson6823 soon.I got some more on the way.
@@BDTennessee awesome thank you
BD:
I did a bad thing yesterday. Ordered my 1st (& last) iX tx. The iX20SE. I'm still queezy on the $$.
Awesome! You ready now :D
@@BDTennessee
LOT of $$. I hope I didn't make an expensive mistake. ALL the ppl I fly with & know, (& Nate at HH I know), said I will be extremely happy!🤞
@@old-rcplane-phart top notch equipment! You going to be happy for sure!
@BD Tennessee
WELL, battery in it was made 08/2018 & had 2 volts in it. Finally got it up to 55%. HOPING it's not garbage (tx battery.). Love the tx!
@@old-rcplane-phart typical for a battery to be older than a radio.However its 4 years old and got to you at 2%. Did you buy it new?
Hi BD. Do you how to flight pack voltage to the main dashboard? I want to display the flight pack voltage in place of timer 2. Thank you.
I like my new IX 14 and appreciate your tutorials. I have something specific for you to cover. In setting up a twin electric with differential thrust, how can I get my throttle cut switch to affect both throttle channels? So far, I have not been able to figure this out or find any good info on it pertaining to this radio. Thanks.
There's a few ways to do that. Y the esc's, mix in rudder with esc's. Just depends on how many channels u have + how many mixes u have.
@@old-rcplane-phart It's not that simple when you need to use differential thrust.
I found a method on RCG from a guy named "Basser" that finally worked.
Could I use this with RC land vehicles? I hate the wheel transmitters and I’ve been trying to find a stick that I could use on my losi trucks.
Uses a different protocol so would need different RX than surface vehicles normally use.
Hey there BD. Any chance you will be out flying on New Year's Day?
Yes at noon.
BD, can you tell me if it's possible to use Spektrum transmitters with receivers from other companies?
Spektrum can work with Lemon Rx or Admiral receivers too.
BD:
Updates? You still flying? Haven't heard or seen anything in a FEW WEEKS!
Hi BD just got my IX14 sometimes I get an error message that say error loading air ware power off for 1 minuet. Have ever received this? Next question I did not see the Apprentice STS in the model photos. thanks for the help
Its something that happened on the IX12 too. Its on the Android side of it. The transmitter itself and the joysticks and switches are completely separated from the Android system, just for reasons like that.
Obviously you can't reset the controller if you have a Model in the Air.
But if it keeps happening I would do a fresh install of the lastest Firmware again and Airwave files if separate..
Seems to be a semi common issue. You could also google and see what others have found.
Put in a support ticket with Horizon/Spektrum. Maybe there's an issue that needs to be fixed and updated.
Sorry didnt see comment. Sometimes happens. I noticed never happens when i close airware before shutting down radio. Hope this helps :)
Hi, I just got the newest eflite a-10 smart 64edf. and I am trying to use switch B to have safe/off/as3x, is
that possible I have the NX10 radio?
I am trying to get my nx10 set up on my A-10 with safe and as3x to work on a switch that can shut both off//?? is it possible?
@@ronnieschaniel9927 yes. You need to setup through forward programming. Once in FP you can designate what different positions do...
@@BDTennessee so if I bind in safe mode will AS3X work, or do I need to Bind in AS3X mode, then set up Switch B a 3 position switch for AS3X/Safe/then all off?, sow in AS3X mode I see safe is still on?
What is the battery life on the TX ??
Plenty of life.I fly 4-6 days before charging.Also i dont let it get down to low level either.
Think the iX14 is significantly better than the NX10?
Both good radios.
NX can configure about anything you want and up 10 channels. Ix14 is more refined / novelty with bigger/color/touch screen.Also the Graphic user interface feels better and more details.Apps if you want to use them.NX is good all around value and does it job which is configure and fly. iX14 is step up in technology all around.