Glass flashes extremely quick. Put it on and wipe off almost immediately. No pressure on the cloth. I just did my car with CQuartz and I messed a few things up. Fortunately Essence will remove any defects in application. Then you just apply again and you're good.
Michael have you tried the new Gliss V2 yet? I'm noticing a much better application yielding much more consistent results, holding up well after a few months on the test car next to EXOv4.
@@WaxMode Yes, I used Gliss V2 on my car. Gliss was easy for me because I applied it in the DAYLIGHT! As opposed to night, which is when I finished the CQuartz application and left a whole top passenger door with CQuartz drying overnight! I had to buff the door out again to remove it. Both products flash extremely fast. Gliss faster than CQuartz. I waited too long with both, I'm pretty sure. I see a few spots that need work, next time I have a moment. But when I apply it next time-- I'll remove it right away. All the videos I've watched since show immediate removal. Don't wait longer than 30 seconds on CQuartz and immediately remove Gliss. They also stress not to rub hard, just dust the dried transfer solution off, so you don't remove any ceramic with the dried solution.
I like seeing that exo and CSL in that final shot. Should do a comparison of EXO by itself to CSL by itself opposed to them used in tandem. Could even put it up against that Synchro kit.
Waqar Azeem I’ve always been curious to see how this would do against P21S 100% Carnauba. It would take a pretty big sale for me to pull the trigger but we will see.
Gyeon One is going to be much more similar to Gyeon Prime (now Pure), but with a much more tedious wipeoff process. See my review here on the forum: www.autopia.org/forums/detailing-product-reviews/188973-gyeon-impressions-gyeon-booster-testing.html
Hello my friend. In your opinion to revive a coating which is starting to be oxidized, (CQuartz lite + gliss V2), can we use an Iron remover without removing the coating? Example, meguiar's iron decon is supposed to have a balanced ph?!. I am thinking of buying myself in a future carpro essence plus. But without gasoline more how would you do? I'm thinking of washing with Meguiar's Ultimate Snow Foam to avoid damaging the coating, Iron Decon, and Meguiar's HCD. What do you think. thank you in advance
Good all around performance compared to Hydro2 and Wetcoat, you're paying extra for the fact that you can use Hydrosilex dry and that's not something you can do with the other two. The problem is so many people had issues with streaking/spotting using it wet that they've removed their recommendation to use it like this, and that's a huge blow to the selling point of the product. There are many other products that I would rather use solely dry compared Hydrosilex. And I believe Hydro2 and Wetcoat both had a higher hydrophobic potential compared to Hydrosilex used wet, so I still preferred to use those on wheels and hard to reach areas. Trying to market it as a sprayable coating is a stretch, it won't touch the potential of true coatings so this is more marketing than reality.
![เปิดบ้าน โคตรสวย ป๋องกพล รู้จักตั้งนาน เพิ่งรู้ว่ารวย!!! l [Nickynachat]](http://i.ytimg.com/vi/tmgCF_2HfYI/mqdefault.jpg)
![NISAMANEE - TADA (ท้าดา) [ OFFICIAL MV ]](http://i.ytimg.com/vi/hcQHEPMmJpU/mqdefault.jpg)
Glass flashes extremely quick. Put it on and wipe off almost immediately. No pressure on the cloth. I just did my car with CQuartz and I messed a few things up. Fortunately Essence will remove any defects in application. Then you just apply again and you're good.
Michael have you tried the new Gliss V2 yet? I'm noticing a much better application yielding much more consistent results, holding up well after a few months on the test car next to EXOv4.
@@WaxMode Yes, I used Gliss V2 on my car. Gliss was easy for me because I applied it in the DAYLIGHT! As opposed to night, which is when I finished the CQuartz application and left a whole top passenger door with CQuartz drying overnight! I had to buff the door out again to remove it.
Both products flash extremely fast. Gliss faster than CQuartz. I waited too long with both, I'm pretty sure. I see a few spots that need work, next time I have a moment. But when I apply it next time-- I'll remove it right away. All the videos I've watched since show immediate removal. Don't wait longer than 30 seconds on CQuartz and immediately remove Gliss. They also stress not to rub hard, just dust the dried transfer solution off, so you don't remove any ceramic with the dried solution.
I like seeing that exo and CSL in that final shot. Should do a comparison of EXO by itself to CSL by itself opposed to them used in tandem. Could even put it up against that Synchro kit.
Thumbs up good to see you back in action. Please review sonax premium class carnauba wax
Waqar Azeem I’ve always been curious to see how this would do against P21S 100% Carnauba. It would take a pretty big sale for me to pull the trigger but we will see.
Have a video with Skin after it has fully cured?
Nice. Maybe trying Gliss vsGyeon One since it’s an entry level coating.
Gyeon One is going to be much more similar to Gyeon Prime (now Pure), but with a much more tedious wipeoff process. See my review here on the forum: www.autopia.org/forums/detailing-product-reviews/188973-gyeon-impressions-gyeon-booster-testing.html
thank you! I've been curious about this.
Hi WaxMode! Would be cool to see your thoughts on Nanolex Si3D/Si3DHD. I see the Recharge back there hiding too lol
Hello, Guys! Can I use Gliss as top coat after two coats of CarPro SKIN in a satin black wrap for extra shine and make the color darker? thank you!
Hello my friend. In your opinion to revive a coating which is starting to be oxidized, (CQuartz lite + gliss V2), can we use an Iron remover without removing the coating? Example, meguiar's iron decon is supposed to have a balanced ph?!. I am thinking of buying myself in a future carpro essence plus. But without gasoline more how would you do? I'm thinking of washing with Meguiar's Ultimate Snow Foam to avoid damaging the coating, Iron Decon, and Meguiar's HCD. What do you think. thank you in advance
Mckees'37 coating with skin should be awesome
Should try the new sonax spray and seal
fortis619 I ordered Spray and Seal during the last sale, we will see how it does against Wet Coat and Hydro2!
WaxMode awesome thats what I’m actually looking for as comparisons , can’t wait
Great videos as always. Have you ever looked into testing One Grand Blitz wax?
First! Keep up the good work.
What's your views on hydrosilex?
Good all around performance compared to Hydro2 and Wetcoat, you're paying extra for the fact that you can use Hydrosilex dry and that's not something you can do with the other two. The problem is so many people had issues with streaking/spotting using it wet that they've removed their recommendation to use it like this, and that's a huge blow to the selling point of the product. There are many other products that I would rather use solely dry compared Hydrosilex. And I believe Hydro2 and Wetcoat both had a higher hydrophobic potential compared to Hydrosilex used wet, so I still preferred to use those on wheels and hard to reach areas. Trying to market it as a sprayable coating is a stretch, it won't touch the potential of true coatings so this is more marketing than reality.
Gyeon is a poor performer