Hp ProCurve Switch 3500yl-48G | Fan Fault | Noisy (SOLVED)
ฝัง
- เผยแพร่เมื่อ 19 ต.ค. 2019
- hp ProCurve Switch 3500yl-48G - fan fault & noisy (SOLVED)
solution/s:
1. cleaned the fan
2. put gear oil on the bearing for lubrication
3. replaced the defective fan
Don't forget to like and subscribe. Thank you.
For any help or assistance, you may send your concern at martealolor@gmail com
#HpProcurveSwitch
![เกิดใหม่ทั้งทีก็เป็นสไลม์ไปซะแล้ว ซีซั่น 3 - ตอนที่ 65 [ซับไทย]](http://i.ytimg.com/vi/4EsinscQCfs/mqdefault.jpg)
![Power Outlets PISS ME OFF [RANT]](/img/n.gif)
Not exactly what i was searching for but great video none the less.
IMHO still makes a lot of noise..so "solved" is only partially. Have you tried installing small noctua fans ? Works great in my synology rackmount nas
Thats good, I haven't try.
While you were in there did you happen to catch the fan make and model number?
If the work will resume. I will let you know the model number.
@@macor285 ok thanks! I have one I just can't get to it at the moment to take the cover off. I have two dead fans.
@@pattygq picclick.co.uk/6pcs-lot-Nidec-Beta-V-TA150DC-B34955-68-HPF-183566846165.html
What about Poe fault?
hello I have an HP 2510G=24 SWITCH J9279A and I want to remove the fun but it appears that if I remove the funs or put a different one it will give an error. Is there a way to flash the switch but it looks like the only funs that accepts are the one installed. Thank you in advance.
Sorry I haven't try it. You need to replace the fan or fix it.
Marte Alolor the fans are fine but I want to put bigger fan’s because the one it has are small and very noice and I did try an another fan it will work but the motherboard doesn’t recognize it and gives an error! Funny haha.. thank anyways for your advice I really appreciate it.
@@hrz_nrd4511 The noisy fan can be fixed, just use a gear oil to lubricate the fan. Put 3 to 4 drops of gear oil to the fan and leave it for 3 to 4 hours before using it.
@@macor285 and you dont want to run them while they are in the machine..if possible start first run outside the switch and on some white napkins/surface. then look if oil is on fins and clean.
@@janblokzijl7583 thats right. Thank you.
Hi i have the same switch and only fans 4-5-6 are spinning on boot and then the fan led is flashing orange. Is this normal (only 3 fans spinning) or should all 6 spin on boot?
All should spin.
Fan LED flashes because all should spin on boot. I have tried manually disconnecting a few fans to reduce noise and which gave me the fan error also
@@tyronjerez3468 i replaced the fans that weren't spinning and the switch is booting again. I found it strange that 3 fans were faulty at the same time.