Awesome review on the switch panel , only thing about this that alot of people dont like is that its a ground switch which you explained by adding relay for pod lights and they have a new switch panel that is the same but it is a powered switch so you wouldnt have to add that relay which im glad they updated because like you said its a nice panel.
Dude the k2 was confusing me since it was 3 wires an I was tryna wonder how I was able to use that combo with that one wire left now a relay definitely sense thanks man!
@@Fentertainment can this be installed through a converter I have a 48volt club car ds with a Roykaw Golf Cart Voltage Reducer Regulator Converter 36/48V to 12V for E-Z-GO Club Car (30A/360W) I bought for it.
@@williamtholken6147 Yes, So the converter output will go to the main power & ground input on this system. Then you will have all the switches and fuses already in place just to add you accessories. Just makes for a cleaner install.
@@Fentertainment will you make a video eventually on how to do this? I currently have a 36v on my golf cart. Both converter outputs go to the main panel or just the positive goes to the panel and the negative to the battery?
I have wired a number of things to it but have one 12" light bar that won't seem to work - when I connect the positive wire of the wiring harness to battery, the circuit board LED lights up regardless of state of the switch panel and it doesn't operate the light bar. (normally the LED only lights up when the switch is on). Any idea why? It's a simple light bar (nicoko 12") with a bluetooth control module and only two wires to the switch.
Great info Ryan as always. Can you tell us how tall the body of the lights are? From Amazon it looks like the dims 2"x3" but I didn't see any reference to the profile/height.
Bro, can I use the switch panel that has 2 sides and connect my 3 wire led bar, ground and amber light to one side and the white light wire to the other side to avoid using relay? Let me know if this will work please
I almost bought it, but information about switching the ground, not the positive is so important to me and make this inappropriate for my application. Thanks for that this
Sounds like a design flaw in their lights. Why wouldn’t they make the lights they sell have individual grounds for each light. They could share the power if they wanted to keep it a 3 wire setup.
@@Fentertainment I just retired. The place I got had a golf cart included. I believe it's a 96 club car. No experience on this stuff. I've replaced the FNR switch to make it go. Worked, shocked. Has a stereo that doesn't work. Anyway, thanks, I'll be watching.
![ตีสิบเดย์ [FULL] | เปิดใจ "อาจารย์ เบียร์ ฅนตื่นธรรม" นักสนทนาธรรมสายดุดัน!](http://i.ytimg.com/vi/vqaBI_mnoDk/mqdefault.jpg)
Thanks for taking the time to step through this setup. It looks like an ideal arrangement for my projects.
Awesome review on the switch panel , only thing about this that alot of people dont like is that its a ground switch which you explained by adding relay for pod lights and they have a new switch panel that is the same but it is a powered switch so you wouldnt have to add that relay which im glad they updated because like you said its a nice panel.
I have the new panel in another video.
Thank you so much for your share and awesome video as always!!
Dude the k2 was confusing me since it was 3 wires an I was tryna wonder how I was able to use that combo with that one wire left now a relay definitely sense thanks man!
Same 😂. I have been thinking about the 3 wires for too long and how I couldn't control the amber separately 😅
Tengo una lampara con 3 posiciones, trae tierra y tres cables mas, como instalarla en el panel? Con dos relays? Gracias
Can I extend the 3pin cable that goes from the panel into fuse box
Thanks Ryan I'm definitely getting that switch panel for you golf cart it's a game changer
I think so to. I can’t wait to get to the stage of installing it.
Make sure you make a video of the installation 👍🏾
@@Fentertainment can this be installed through a converter I have a 48volt club car ds with a Roykaw Golf Cart Voltage Reducer Regulator Converter 36/48V to 12V for E-Z-GO Club Car (30A/360W) I bought for it.
@@williamtholken6147 Yes, So the converter output will go to the main power & ground input on this system. Then you will have all the switches and fuses already in place just to add you accessories. Just makes for a cleaner install.
@@Fentertainment will you make a video eventually on how to do this? I currently have a 36v on my golf cart. Both converter outputs go to the main panel or just the positive goes to the panel and the negative to the battery?
I looked and did not find a review video on the power Queen battery. Was wondering did you do a video and I just missed it?
I have wired a number of things to it but have one 12" light bar that won't seem to work - when I connect the positive wire of the wiring harness to battery, the circuit board LED lights up regardless of state of the switch panel and it doesn't operate the light bar. (normally the LED only lights up when the switch is on). Any idea why?
It's a simple light bar (nicoko 12") with a bluetooth control module and only two wires to the switch.
GREAT INFO . HOW LONG IS THE CABLE FROM THE PANEL TO THE FUSE BLOCK ?
Thanks for the r switch info 👍
Great info Ryan as always. Can you tell us how tall the body of the lights are? From Amazon it looks like the dims 2"x3" but I didn't see any reference to the profile/height.
I have the auxbeam version and it works great.
I really like this setup!
Wondering if it could do ignition and starter on my buggy
Much more affordable option than SwitchPro SP9100. However this doesn’t have flash or strobe function. I chose MicTuning
Bro, can I use the switch panel that has 2 sides and connect my 3 wire led bar, ground and amber light to one side and the white light wire to the other side to avoid using relay? Let me know if this will work please
Late to the vid but how many amps are the rock lights pulling? I have the same ones and don’t wanna plug into the wrong location and blow a fuse. TIA
I have an auxbeam gang switch with tie ins from 5A to 30A
I almost bought it, but information about switching the ground, not the positive is so important to me and make this inappropriate for my application. Thanks for that this
Understandable. The new one switches power and not ground. On this one I used a 12v relay to switch polarity for one thing I powered with it.
@@Fentertainment OK, great news. I'm goin to reach out to them and see if I get what I need. Thanks for reply
Nice lights bro👍
Only thing I don't like is the negative side switching.
what’s negative side switching could you explain for me❤️
I think what he's saying is the red terminals are always hot and the black wire only is opened and closed for each terminal.@@Judy_zy
Sounds like a design flaw in their lights. Why wouldn’t they make the lights they sell have individual grounds for each light. They could share the power if they wanted to keep it a 3 wire setup.
You can't buy this stuff as of now from Amazon.
@@Dale-ko9kc amzn.to/4dBCmUc
@@Fentertainment I just retired. The place I got had a golf cart included. I believe it's a 96 club car. No experience on this stuff. I've replaced the FNR switch to make it go. Worked, shocked. Has a stereo that doesn't work. Anyway, thanks, I'll be watching.
It's a copy of the Aux power system except aux has phone app and can work with your cars touch screen no relays, 😡