Awesome instructions. Thanks mate! I've been meaning to make one of these for ages (and save my shirts and backside from dirt stripes) and you made it step by step easy. In fact I made the template for the fender while on a coffee break :)
This is super easy and works well I'm so happy I found this video and the front fender video. I did both of them and on my first try took less then 20mins. I didn't have any plastic laying around so I had to use cardboard. I don't expect it to last long. Also for the rear fender I made some adjustments. First I took a metal hanger and stretched it out. Then I put it through the bottom of the seat. (same place you have yours). Last I duct taped two pieces of cardboard matching the hangers design and that's it. Without this I would be all wet for work today thank you so much.
+BunkerHillAirsoft you could try painting/clearcoating the cardboard to seal it up & will prevent the cardboard from getting soggy too.also if you drill the holes a bit further apart it will curve the length slightly & prevent it from sagging,some trial & error tests made on scrap cardboard will allow u get the hole spacing right before making a better one in plastic,also measuring the width of the seat rails with vernier calipers or a ruler should make this process easier :)
also try laminating 2 thicknessess of cardboard together with p.v.a glue,this glue is plastic (poly vinyl acetate) so it will stand up to rain & the weather too :) also some watered down pva could be painted onto the cardboard to seal it up & as a bonus will stiffen it up too :)
I thought plastic cover on cardboard too. If water gets inside it makes cardboard soft. Maybe milk package, it is designed to hold watery product or juice package. They are limited in hight though. I made chainguard from plastic cover. Between tyre frame and chain to protect chain from mud.
thank you for the video, honestly after todays weather i was going to purchase one but I would much rather make my own for a fraction of the cost lol, great thinking as well with the chopstick idea, leaving now for the store to get this party started!! bike on man!
James Weber its true tho i made one the day o commented, and i used a all clear plastic from a box that had gift wrapping rolles in them , and i made a almost square triangle thst covered around the wheel and i can say i was spotless etven on the sides of the tighs and outter part of the cheeks , Thinking of making a tutorial aswell
![THE TOYS x NONT TANONT - ดอกไม้ที่รอฝน (spring) [Official MV]](http://i.ytimg.com/vi/pPa1d5cC8M4/mqdefault.jpg)
Thank you. I have a bike but it’s been so rainy and no fenders. Now away I go….you’re amazing. Take care
Thanks, looking at how simple the ones on sale are, I immediately thought, well I could make one, and then found your video. Nice one.
Awesome instructions. Thanks mate! I've been meaning to make one of these for ages (and save my shirts and backside from dirt stripes) and you made it step by step easy. In fact I made the template for the fender while on a coffee break :)
Nice video. What kind of sweater are you wearing ? IT can stash lots of ítems in its pockets.
I think I'm in love with you! Thanks for the tutorial and spending quality time with us teaching us
Great tutorial. The color matches your bike too. Very nice.
Thanks man. I appreciate the tutorial
You looked a bit nervous but good on you for making this and thank you! All the best, buddy :)
Not at all thats his demeanor
This is super easy and works well I'm so happy I found this video and the front fender video. I did both of them and on my first try took less then 20mins. I didn't have any plastic laying around so I had to use cardboard. I don't expect it to last long. Also for the rear fender I made some adjustments. First I took a metal hanger and stretched it out. Then I put it through the bottom of the seat. (same place you have yours). Last I duct taped two pieces of cardboard matching the hangers design and that's it. Without this I would be all wet for work today thank you so much.
+BunkerHillAirsoft you could try painting/clearcoating the cardboard to seal it up & will prevent the cardboard from getting soggy too.also if you drill the holes a bit further apart it will curve the length slightly & prevent it from sagging,some trial & error tests made on scrap cardboard will allow u get the hole spacing right before making a better one in plastic,also measuring the width of the seat rails with vernier calipers or a ruler should make this process easier :)
also try laminating 2 thicknessess of cardboard together with p.v.a glue,this glue is plastic (poly vinyl acetate) so it will stand up to rain & the weather too :) also some watered down pva could be painted onto the cardboard to seal it up & as a bonus will stiffen it up too :)
I thought plastic cover on cardboard too. If water gets inside it makes cardboard soft. Maybe milk package, it is designed to hold watery product or juice package. They are limited in hight though.
I made chainguard from plastic cover. Between tyre frame and chain to protect chain from mud.
Lo fabrique y me quedó muy bien! Gracias por la información y por su pedagogía
very cool sir, much appreciated! where can i find your music?
Thanks for the tips 🔥
Cool tutorial man ;)
Time to go shopping in my garden. Found an old no smoking sign lol
Fantastic, thanks 👍
Nice work man👍👍👍
Good information,really helpful.....👍👍👍👍👍worked greatly
The Loonie store. I'm a Canuck and that's the first time I ever heard someone call a dollar store by that name.
thank you for the video, honestly after todays weather i was going to purchase one but I would much rather make my own for a fraction of the cost lol, great thinking as well with the chopstick idea, leaving now for the store to get this party started!! bike on man!
Cool one, thanks for sharing! You look cool too! :-D
You are awesome!
Thanks I used a 20L water bottle works great. Have a great life ride safe and remember to smile there watching 👽
Goated to this day
Thanks a lot bro.👍👍
My boi got the drip
Which type of plastic are use
Thanks bro
Nice dude
awesome and cool . kipidab ! dongibab !
Nice sweater
Love the outfit
Cool pretty neat :)
Nice
tnx man❤️
Cool man.. I made my, tank`s!!!!
Jeez did all that stuff came out of that one pocket... gotta get me that cardigan
Tnx!
I made some to
Nice hair, it's pretty
Cool
New age mr rogers neighborhood lol jk thanks man
good shit
there is something called perforator that everyone has and is more useful for the holes
it's like ass-saver! Saw it online
nvbn🚑🚗🚖🚝🚁🚜🚠🚟🚞🚞🚡🚕🚜🚙🚟🚖🚝
"Extrapolate"? On a DIY bike fender? LOL!
Good Job.
The easiest Ass Saver for Bike that i've watched on YT.
😉😉😉❤
#ShareTheRoadToBikers
#GlobalPrayerForHumanity
Oct, 19 ,2021
Good video totally thought you were a chick from that outfit at first
Left handed. Word.
Bruuh, thats a lil too short😂
mis huevos!!...
look at mine
1:50 can’t make a straight line with a ruler. Confirmed!!!!
Lol
background music is terrible
Your super sweet yellow cardigan is gonna get all dirty with this crappy design, the fender needs to be down by the rear break.
he has style, who cares
lol youtube comments
never mind the part about how this design doesn't actually prevent your ass from getting drenched
James Weber its true tho i made one the day o commented, and i used a all clear plastic from a box that had gift wrapping rolles in them , and i made a almost square triangle thst covered around the wheel and i can say i was spotless etven on the sides of the tighs and outter part of the cheeks ,
Thinking of making a tutorial aswell
OMG. Why does he have to look like that?
You look like shit
dude these things cost $2 on ebay
Waste of time. This would not work well either.
It's a great tutorial! Unless you did it wrong
I think he is gay
yeah, or just really shy and being forced to do this
sakina azhar is wet ?
I think you're gay
Soo boring don't make any video ok
You're boring, don't talk shit