I was sceptical but gave it a try. I did all the mods and now I am able to do double backflips. I think the weight reduction from the carbon spacer made the biggest difference.
@@celsomonteiro6541 yes ofcourse. The xc racers will go so fast uphill with the weight reduction from removing the chain. Then they could remove the entire drivetrain cranks freehub bottombracket shifters. And you will save money on lubes
I'm relatively new to mountain biking...having ridden only 10-speeds in my youth. I am drawn to your videos because of your low-thrills video editing approach. In essence...you provide very useful information without all the sensationalism. THANK YOU! The vast array of subjects is also intriguing.
Best chain stay protector is to wrap 550 paracord wrapped around the stay then burn it to itself at the ends. It's quiet, cheap, looks pretty awesome, and who knows when you may need paracord on the ride.
If you have a downhill/freeride bike, I would recommend to wrap an old tube around the frame to protect it from the chain. Just secure it with zip ties at the ends. That's the best protection. It also has more of kind of an aggressive look to it which fits dh/fr pretty well.
Two hacks for standard handle bar grips: 1. Inject water between grip and handlebar with a cheap syringe to get them off the handlebar. 2. Spray some standard hairspray on the handlebar to put the grips on. The hairspray will work like a lubricant while it’s wet and like glue after 1-2 hours after you attached the grips.
@@Jay-we2ek That works fine when things are new. Once you have them on for 3 years they are stuck to the handlebar and sometimes have to be cut off. Having anything between can help, acrylates are used for that specific purpose elsewhere too; gives a bit of adhesion but can be softened with water when needed.
This was the first video I saw a year ago when I got back into biking. And I was hooked all your little hacks you have shown us I use on all my bikes. Thanks Seth for guiding me in the right path. I started with a specialized Rockhopper and now proud owner of DB R5C.
I would NOT use griptape on the chain-stay. Its highly abrasive and tends to release bits of grit. I'm not saying this would happen immediately, but over time you'd risk having little bits of abrasive gunk in your gears. Much better options out there. And if you think to use it on your shifters rub it with another piece of griptape and soften the harshness of it a bit, your fingers will thank you.
Don't use electrical tape as chain protection. With temperature and time the sticky sides kinda melts but stays really sticky, nasty sticky, like melted bubble gum. I've done it, and won't do it again. Plus the tape starts hanging and it looks really "ghetto". What i did instead was buy some cheap neoprene jacket at a thrift store, cut out some rectangle pieces and ziptied it around the part of the frame where the chain hits. Works great and it was cheap and you can make a lot of them.
I taped a worn out bike tube to the bottom of my bike and to the chain frame part (forgot what it's called lol) works really well. And if done neat, looks attractive
Another generic style comment about how this a classic Seth style video. This is not really his original or classic style in my opinion, the classic Seth used to sound relaxed and not care to say fuck or shit.
Can't disagree, but remember that not saying those words allows him to address a bigger audience. Like it or not, there are youtube users that get worked up when they hear those words. And some kids too, it seems.
Deartist 7 I tend to delete people who i watch on youtube or fb who swear a lot because there is no need for it I'm a father of 1 little 5 year old and don't want him growing up swearing his head off 😠
Stewart Summerside I teach my seven year old about curse words cause I'd rather he learn it from me than some kids at school. He also knows where and when it's appropriate to use them. If your kid watches any TH-cam unsupervised, they are gonna run into cursing.
Seth, I don't know if this is possible, but it would be amazing if you did a track stand on a paddle board in the ocean. You could get millions of views for that one.
I don't think sandpaper would be good for chainstay protection because every time your chain smacks against it your chain would get super scratched up, but pretty sweet video, I'm gona be buying a proper mtb pretty soon and these are some good ideas.
I was thinking that at first too, but the scratches would probably be negligible. You'd probably want to replace your chain due to regular wear first, but... yeah, I'd skip that 'upgrade' too. An old inner tube works well, despite being a bit heavy.
I use some old rim tape wrapped around the chain stay with electrical tape on either end , I don't wrap the electrical tape all the way around the chain stay along with the rim tape because the electrical tape would get all chewed up by chain slap and look nasty after a while , just a cool idea I thought of that I figured I'd share
I’m no bike expert but I’ve worked on cars and 4wd for a long time along with electrical, now the only one I know is a terrible idea is the type of cable tie used! The coloured type is not uv resistant! You need proper black UV resistant quality brand cable ties if you don’t want to be replacing them much more often than necessary!
Never had that issue. Firstly I don't lean my bike against a car, secondly with my wall it's the other way round it scratches my bike and with other bikes I never discovered that it gets scratches since it has very flush ends and also there isn't much force behind it (I mean my bike doesn't weigh a ton)
personally when using metal valve stems, i always add a small splodge of anti-seize or copper grease for good measure. nothing worse than going to pump up your tyres and finding out the stem cap has stuck! great video nonetheless!!
The comments here is like going to the Apollo. All most have to do now is upgrade their man cave to store all the spare stuff left over that came in packs of 10,000 units.
I've never liked the bolt on grips, I have big hands and find them all too short. And if you leave the handle bar ends open, you can collect soil for your pot plants at home.
They can also scratch your paint if you lean your bike on your vehicle the wrong way. You want to get tangled with bars in crash either. One sided bolt on grips are best imo.
@@lonh8554 Lean your bike on your vehicle???? Well what kind of f£$%&_~ idiot would do that???? Not me obviously. I didn't do that, and have my new Fat Bike slip backwards go down with the bars turning under the bike and actually break the little curved tube that supports the cable to my dropper seatpost. Obviously.
i once saw a guy who didn't have bar ends and the end of his bars were worn down and sharp, after taking a fall he trapped his thumb underneath it and cut the end clean off :O ever since our local skatepark won't let bmxers in without bar plugs!
one cheap part which makes crank maintenance easier is swapping shimanos preload cap with an aluminium hex key cap, so you don't need to dig out the preload cap tool.
ashlie higgins you have to be careful with hex caps since these preload caps are suppossed to be tighten with your hand only without applying much torque at all
Your logic is off. You use a tool to tighten Shimano preload caps, just like you would use a tool to tighten a hex cap. Just tighten it enough to take out any play. There's no reason to believe that having a hex cap would make a user more likely to overtighten their preload cap just because it uses a standard tool.
it's the faff of trying to dig out the preload tool, and you can't get any purchase on the crappy plastic ones, or if you get hopetech's preload tool, it's awkward to get it to fit, as it slides of the hex bit, when with a hex key cap just grab a 10mm hex key torque it up and it's fine.
he is talking about bikes, not torture devices. Seriously, go to a bike store and test drive 500$ to 1500$ Mountainbikes and you will notice that, at the moment, you are not riding a bike but make yourself miserable. ;)
As a chainstay protector, I would add: Use a flat inner tire. cut it open en then wrap it around the chainstay like you did with the tape. lock it in place with tie rips.
Kelvin Mulder it looks desgusting though. a better solution is to stick road bike dropbar tape at the top n bottom of your chainstays. it looks very clean n its lighter.
Fran Rod That is also a very good idea. I don't agree on the disgusting part though, I think it looks rough yes, but that is what mountainbiking is right?
I know that this was 5 years ago but I still love it as a newbie. Also the pacing with 10 tips in 7 min is refreshing. PS I did all the mods this past year and they are still good tips (especially in ongoing covid isolation)
Johannes Nilsen If you have rim brakes, the reflective tape will get in the way of your brake pads. You're better off making little reflector tape flags on a few spokes in that case.
Scott J of course I though you meant spoke mounted reflectors, but I broken some of those, I never ride with reflectors anymore,but not st tried reflector warping wheels yet.
M T , yeah good idea Bro 👍 in some countries it's also called "self laminating tape" or "self vulcanising tape". It's not sticky either so it doesn't leave any residue behind
RSA Jay. Instead of using electrical tape on your change stay use Self-Fusing Silicone Tape instead. It last a long time and works great. The only down side is that it doesn't come in very many colors. I've see white, red and black, but there might be other colors. I use this www.amazon.com/Emergency-Repair-Tape-Self-Fusing-Silicone/dp/B00KBSWRDO
Jo Seth! Great videos! I have a hack for you. If you don't want to wrap your chainstay with 3M tape, grab an old and damaged inner tube, cut a 20 inch piece from it and wrap it around your chainstay. Secure it with zip ties. This protector will last forever
The dork disc potentially saved me about a month ago. A small mishap on the trail (off the side of the trail and into a creek) knocked my derailleur out of adjustment. A bit further down the trail and thought my chain came off, only to find that the chain was riding between the cassette and the disc. While I don't know how much damage was avoided, I do know a quick adjustment on the side of the trail and I was able to make it home to properly adjust the derailleur without having to spend any money on repairs. Function should never take a backseat to appearance.
“Still you want to spoil your bike, but you’re totally friggin’ broke.” The way Seth says this sums up why I love Seth and this channel, and only mildly care about mtb 😂
Carbon Fibre Spacer and the Zip ties might count as upgrades as one makes your bike *wAY liGHteR* and the *pRo zIptIEs* keep the brake cable attached to the frame.
You are by far the sickest TH-cam out there! What full suspension trail bike do you suggest that I get? Try to keep it around the $1500 range though! Great job!
Thanks! To be honest I think Greg Heil's article on this really hit the mark: www.singletracks.com/blog/mtb-gear/buyers-guide-budget-full-suspension-mountain-bikes/
Look into direct sales models from Chain Reaction or Jenson to get some really sweet deals. Also look into VITUS or Cube bikes-- really cheap, great spec, high quality. Giant is also an awesome brand that you can find at a local dealer. If you live outside of the U.S check out Canyon (although they should be shipping to the U.S in 2017). If you're a first timer I would highly recommend you get a hardtail though. More Value, less cash, lot of fun, helps you progress.
In the UK Cube bikes have took of in a big way. But when it comes to wheels go Mavic. I bought a set of Cross Rides a few yrs back when they just came out. Real sweet wheels
Yeah, these cheap upgrades are actually something I may actually do or utilize, he really did well here!!! Its really hard to be original since gmbn makes a video a day!!
John Nickerson I used to think so as well, it feels that way when you try it for the first time, but it turned out to be fine, I see no increased wear on the glove fingers after 6 months.
Dont use sandpaper on the shifter your just going to make your thumb and fingers sore, red and bleed if you constantly using them or if your finger slip. And dont use it for a chain stay as this will slowly wear away the chain as it hits the frame.
In dusty conditions cut out a strip of furnace filter about 15” x 4”; zip tie it to the frame support just behind the front wheel; small piece of tape keeps zip tie from sliding; now I don’t need to wear uncomfortable dust mask and the filter is super lite.
The dork disc is something I will never take off my bike! I love my bikes and they are very well maintained. But my chain has shifted off the cassete and would have destroyed my wheel. I smashed my derailluer on a fast descent and shifted off the cassette by accident, it was a broken hanger and derailleur but could have been much worse. I learnt a lesson that day.
My dork disc cracked and flew off. I checked online and bike shops and they cost $15 to $25!!! I finally found an unchained abandoned rusty bike with most of its parts stripped off...took it home and removed it's dork disc and put it on my wheel. Put what's left of that bike on the curb and by the next day some metal collector took it away.
Forgot to mention...I did that because I've heard of horror stories of a perfectly set rear derailleur or the chain popping off and completely breaking the spokes and mangling the wheel.
Awesome work Seth, I get cred on the trail now when I hang out with the bros there, thanks to following these tips. Now that the dork disc has gone and the addition of odd color cable end and ties, it has turned my life about, but now broke due the cash outlay with all the added bling, I cant wait to waste my life with trying more useless tips.
some or most neoprene chain protectors are not good, and will wear out fast,and side backwards,the best method is to cut a tube on the side and wrap it on the chain stay(s). it works on all frames,and you can get the perfect length. Dork disk is useless,but with proper rear dérailleur adjustment you don't need it, but eve nif you adjust it it will get loose quite fast,so Loctite the Rear dérailleur screws(and any other screws on your bike),temperature changes & vibrations will loosen bolts and screws so Loctite them!!!.
I wouldn't recommend the metal valve stem caps. Metal expands and contracts so a metal to metal connection can seize, especially if there is grime, salt, or corrosion. Unless you feel like lubing your stem caps to avoid that, stick to plastic.
Odyssey plastic Pedals were the best pedals I ever had, and you get them mostly under twenty Euro/Dollar. I am 1,93m, 95kg and broke my cranks with a lifetime warranty, but the pedals after 10 years are still alive on my BMX...
Oh yeah, the red bike theory is as peer reviewed as quantum theory. :D Actually perhaps if your bike is pimped out you tend to work harder not to embarrass yourself. Except if you're Fabio Wibmer in which case back flipping granny's bike is way cooler.
I don't even have a red bike sadly. But yes a nice looking bike is faster, like you said don't wanna look like a rich guy that can't put skills where his money is.
For the plastic disc behind derailer An old trick for securing it on better is use a soldering iron to melt holes into it then you can zip tie it to the spokes It beats those silly plastic nob ends for sure! I do that for some of my clients when doing tune ups if they tell me they ride trails yet want to keep them on
1.Change your C-clips and tie your brake cables together with zip ties 2. Put tape around your chainstay 3. Change your grips 4.Change your bar ends 5. Lube your drivetrain 6. Put grip tape on your levers 7. Change the silver cap on your brake ends 8. Remove your dork disc 9. Change your valve stems 10. Replace your stem spacers
I was sceptical but gave it a try. I did all the mods and now I am able to do double backflips. I think the weight reduction from the carbon spacer made the biggest difference.
Oddball Mcdoodle
😂 hmmm I got similar results too.
thanks for the laugh xD
Whoa lol hahaha🤣
Lol thanks for the laugh...
U can also stick a empty plastic bottle on top of the back tire. wedged between the wheel and frame.
To get an amazing motorbike sound.
Or Pokémon cards
Are you filipino?
😂😂😂😂😂👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼🤣🤣🤣🤣🤣
i invented that
GGMU
Oh thank you so much for the colored wire end tips. Since i have switched from regular to blue I notice girls digging me left and right.
Yeah, me too put Ferari sticker on, now I open office doors without hads :)))
Shure buddy
@@carlwheezer7459 it was a joke buddy
4:02 Grip tape on the chain stay? So every time the chain bounces against that grip tape, it's getting sanded down. Lol.
Weight reduction my boy
The dream of xc racers and soon they’ll want
Carbon fiber lubricant
It's only a bad idea because it will make the chain rust by sanding off the protective outer layer
protects the bike by getting rid of the chain. Who needs a chain anyway xD
@@celsomonteiro6541 yes ofcourse. The xc racers will go so fast uphill with the weight reduction from removing the chain. Then they could remove the entire drivetrain cranks freehub bottombracket shifters. And you will save money on lubes
Thanks! I'm going to have the baddest Huffy bike on my block now.
lmao
huffy makes high-end, quality racing bikes too
My broke apart when i road it over a curb
I bought the new huffy rock creek 29 & I'm upgrading it, so far I've changed the tires to the kenda sport nevega 29 2 20
"Everyone hates valve caps"
I don't. They look better than a sharp valve poker.
Plus plastic ones are easier to get off after some time.
@@JohnyMcNeal yea but if you run over it with you bike
i like my blue anodized valve caps! wouldn't even think of not having valve caps! haha
Plastic ones crack. I hate that.
@@chiquicat1 but aluminum caps get crusty overtime, I just prefer plastic caps since they are cheaper. But I respect your opinion.
I'm relatively new to mountain biking...having ridden only 10-speeds in my youth. I am drawn to your videos because of your low-thrills video editing approach. In essence...you provide very useful information without all the sensationalism. THANK YOU! The vast array of subjects is also intriguing.
I asked my parents for some lube and i got smacked in the back of the head rip
@Ali youre kidding
Manny Pacquiao F
@Manny Pacquiao Epic gamer moment
Your parents need to change their attitude towards lube... in the end it makes the ride much smoother and pleasant for everyone! ^^
PotatoBlin lmaoooo
Best chain stay protector is to wrap 550 paracord wrapped around the stay then burn it to itself at the ends. It's quiet, cheap, looks pretty awesome, and who knows when you may need paracord on the ride.
Thats freakin' genius. I thought it was a stupid idea until the last part, then it all made sense...
Also nothing wrong with an old tube and a ziptie.. Quiet, tough and a great way to recycle an old tube.
@@JasonTankard and can be used to start fire in emergency
Too heavy, I'll pass.
@@CONFUCIUS-f2x how heavy do you think Paracord is?
If you have a downhill/freeride bike, I would recommend to wrap an old tube around the frame to protect it from the chain. Just secure it with zip ties at the ends. That's the best protection. It also has more of kind of an aggressive look to it which fits dh/fr pretty well.
Two hacks for standard handle bar grips:
1. Inject water between grip and handlebar with a cheap syringe to get them off the handlebar.
2. Spray some standard hairspray on the handlebar to put the grips on. The hairspray will work like a lubricant while it’s wet and like glue after 1-2 hours after you attached the grips.
Or,
1: pull them off
2: push them on.
Why complicate things?
@@Jay-we2ek That works fine when things are new. Once you have them on for 3 years they are stuck to the handlebar and sometimes have to be cut off. Having anything between can help, acrylates are used for that specific purpose elsewhere too; gives a bit of adhesion but can be softened with water when needed.
We are The lies baby
If you have the option, just use compressed air. To get them on and off easily without peeling
@@Jay-we2ekbecause putting them on like normal means they're going to slip around. I know you were born dumb, but it takes real effort to stay dumb.
I went and bought all these upgrades now all I need is a mountain bike 🚵♀️
Lmao
😆
Nice
😂😂🤣
😂
This was the first video I saw a year ago when I got back into biking. And I was hooked all your little hacks you have shown us I use on all my bikes. Thanks Seth for guiding me in the right path. I started with a specialized Rockhopper and now proud owner of DB R5C.
I would NOT use griptape on the chain-stay. Its highly abrasive and tends to release bits of grit. I'm not saying this would happen immediately, but over time you'd risk having little bits of abrasive gunk in your gears. Much better options out there. And if you think to use it on your shifters rub it with another piece of griptape and soften the harshness of it a bit, your fingers will thank you.
Þorír Bjørk 8
I skate and just bought my first mtb and I was like ".....wtf, no" hahaha
@@Gwilfawe yea same lol
Put some carbon on the soles of your shoes, then when you walk the trail, people will see your carbon footprint..👟👟🥾🥾👟👟🥾🥾👟👟🥾🥾👟👟
urban sk8r had me in stitches haha
Woooow 😂😂😂
Put some on Greta Thunberg's shoes.
lol stupid but funny
My footprint is carbon-neutral.
Don't use electrical tape as chain protection. With temperature and time the sticky sides kinda melts but stays really sticky, nasty sticky, like melted bubble gum. I've done it, and won't do it again. Plus the tape starts hanging and it looks really "ghetto".
What i did instead was buy some cheap neoprene jacket at a thrift store, cut out some rectangle pieces and ziptied it around the part of the frame where the chain hits. Works great and it was cheap and you can make a lot of them.
👍🏻
I glued a piece of leftover carpet on. Also handy to clean the soles of my shoes after a muddy ride
But did you spring for the 3m?
I ziptied a piece of old cycle tube on mine
I taped a worn out bike tube to the bottom of my bike and to the chain frame part (forgot what it's called lol) works really well. And if done neat, looks attractive
Its awesome that you consider making your bike look cooler "upgrading" it. I'm not the only one!
It's what the guys driving Civics with wings and fart cans think, too.
lmao ^^
Hahaha
Upgrading the look maybe???
Khyren Hoskovec unlike people in the car community who just say your a ricer! I too think customisation is a huge plus!
"So you just spent all your money on a new mountain bike"
...Yes
Another classic style seths bike hacks video
Another generic style comment about how this a classic Seth style video. This is not really his original or classic style in my opinion, the classic Seth used to sound relaxed and not care to say fuck or shit.
Can't disagree, but remember that not saying those words allows him to address a bigger audience.
Like it or not, there are youtube users that get worked up when they hear those words. And some kids too, it seems.
Deartist 7 I tend to delete people who i watch on youtube or fb who swear a lot because there is no need for it I'm a father of 1 little 5 year old and don't want him growing up swearing his head off 😠
Stewart Summerside He doesn't now, who cares.
Stewart Summerside I teach my seven year old about curse words cause I'd rather he learn it from me than some kids at school. He also knows where and when it's appropriate to use them. If your kid watches any TH-cam unsupervised, they are gonna run into cursing.
Seth, I don't know if this is possible, but it would be amazing if you did a track stand on a paddle board in the ocean. You could get millions of views for that one.
Big difference with my carbon spacer, so happy with this purchase
Bike went through an entire weight loss program thanks to you
Thanks Seth:D
"You stare at it, you pamper it, and of course you ride it." You talking about a bike or a girlfriend?
Both
Lol
He wants a girlfriend but pretends his bike like it
RFC Vlogs he’s married...
@@josephtatton966 r/wooosh
I don't think sandpaper would be good for chainstay protection because every time your chain smacks against it your chain would get super scratched up, but pretty sweet video, I'm gona be buying a proper mtb pretty soon and these are some good ideas.
I was thinking that at first too, but the scratches would probably be negligible. You'd probably want to replace your chain due to regular wear first, but... yeah, I'd skip that 'upgrade' too.
An old inner tube works well, despite being a bit heavy.
Mike O'. road bike dropbar tape is the best
I use some old rim tape wrapped around the chain stay with electrical tape on either end , I don't wrap the electrical tape all the way around the chain stay along with the rim tape because the electrical tape would get all chewed up by chain slap and look nasty after a while , just a cool idea I thought of that I figured I'd share
It wouldn't really damage your chain.
I use an old inner tube wrapped around and zip tied on each end.
Environmentally friendly, cheap and also keeps it quiet
I’m no bike expert but I’ve worked on cars and 4wd for a long time along with electrical, now the only one I know is a terrible idea is the type of cable tie used! The coloured type is not uv resistant! You need proper black UV resistant quality brand cable ties if you don’t want to be replacing them much more often than necessary!
How about put a seths bike hacks face sticker on it?
It adds a little weight, but the payoff is worthwhile
I don't know what you are talking about a Seth's bike hacks sticker reduced my bike weight by 5 pounds
You took the words out of my mouth.
Seth's Bike Hacks after the carbon spacer i think its worth the weight..
Seth's Bike Hacks how does a guy get one of your stickers?
Only problem with metallic bar ends is that they scratch anything that the bike leans against. Cars, walls, other bikes, etc.
Never had that issue. Firstly I don't lean my bike against a car, secondly with my wall it's the other way round it scratches my bike and with other bikes I never discovered that it gets scratches since it has very flush ends and also there isn't much force behind it (I mean my bike doesn't weigh a ton)
put a blob of hot gun glue on the end, problem solved !!!! Rocket Science !
@@philboeroe Just wait till you take a corner too tight
these are all good tips .. just got a new MTB bike for my son ... really helps .. thank you
2:10 my dad uses a old innertube to use as a chain guard
hey dude your videos are never boring 👌🏽👍🏼
Seth has the best TH-cam channel on biking. Hands down.
personally when using metal valve stems, i always add a small splodge of anti-seize or copper grease for good measure. nothing worse than going to pump up your tyres and finding out the stem cap has stuck!
great video nonetheless!!
another awesome upgrade is to clip hockey cards to the front and rear tire spokes. makes a really cool sound
that is only cool if you are ten and wanna impress your friends
stan lee bruh don’t need that my bike already sounds like a motorcycle lol
>hockey cards
hello, Canada
oh i always just jam a stick in my front wheel and do a sick front flip
Beer can wedged between the tire and fork sounds meaner
The comments here is like going to the Apollo. All most have to do now is upgrade their man cave to store all the spare stuff left over that came in packs of 10,000 units.
Dude that bike looks so bad ass. Frame is my favorite color and so are the bars.
I've never liked the bolt on grips, I have big hands and find them all too short. And if you leave the handle bar ends open, you can collect soil for your pot plants at home.
Wow, that's all organic 'n' stuff! ;D
They can also scratch your paint if you lean your bike on your vehicle the wrong way. You want to get tangled with bars in crash either. One sided bolt on grips are best imo.
@@lonh8554 Lean your bike on your vehicle???? Well what kind of f£$%&_~ idiot would do that????
Not me obviously. I didn't do that, and have my new Fat Bike slip backwards go down with the bars turning under the bike and actually break the little curved tube that supports the cable to my dropper seatpost. Obviously.
I've been collecting soil for years. I thought I was the only one.
i once saw a guy who didn't have bar ends and the end of his bars were worn down and sharp, after taking a fall he trapped his thumb underneath it and cut the end clean off :O ever since our local skatepark won't let bmxers in without bar plugs!
Watching my first ever Seth bike hacks video on the last day of 2019
keep shredding Seth love the videos dude
Ha Ha same here I love everyone of Seths uploads
one cheap part which makes crank maintenance easier is swapping shimanos preload cap with an aluminium hex key cap, so you don't need to dig out the preload cap tool.
That's pretty smart actually
ashlie higgins you have to be careful with hex caps since these preload caps are suppossed to be tighten with your hand only without applying much torque at all
Your logic is off. You use a tool to tighten Shimano preload caps, just like you would use a tool to tighten a hex cap. Just tighten it enough to take out any play. There's no reason to believe that having a hex cap would make a user more likely to overtighten their preload cap just because it uses a standard tool.
it's the faff of trying to dig out the preload tool, and you can't get any purchase on the crappy plastic ones, or if you get hopetech's preload tool, it's awkward to get it to fit, as it slides of the hex bit, when with a hex key cap just grab a 10mm hex key torque it up and it's fine.
Where do I find me one of these?
0:02 I spent my life savings 😢 a whole $90 bucks for a specialized hard rock😂
Nobody:
Seth every 10 seconds:
B O R I N G
Why did i watch this? I dont even have a mountain bike..
Jordan Edlin same here
but you want one
Same here. What the hell is a mountain bike?
fetB
I guess we do.
That is why you watched it you were curious this is all common knowledge to serious riders.
This is like my 15th time watching this😂
why ?
Me too! It's the only bike upgrade video on this channel!
Same
same
Same
I have 45$ bike what did you exspect me to buy 12$ grips?
i think this guide is meant for people with $200+ bikes
@@danielmattos2813 i think you missed a zero in your comment xD
@@danielmattos2813 2000*
he is talking about bikes, not torture devices. Seriously, go to a bike store and test drive 500$ to 1500$ Mountainbikes and you will notice that, at the moment, you are not riding a bike but make yourself miserable. ;)
Das Morbo 50 dollar bikes are not torture devices if you take care of them, why spend 500 if you can spend like 250
As a chainstay protector, I would add: Use a flat inner tire. cut it open en then wrap it around the chainstay like you did with the tape. lock it in place with tie rips.
Kelvin Mulder it looks desgusting though. a better solution is to stick road bike dropbar tape at the top n bottom of your chainstays. it looks very clean n its lighter.
Fran Rod That is also a very good idea. I don't agree on the disgusting part though, I think it looks rough yes, but that is what mountainbiking is right?
I always do this, looks clean if you get it right!
im new to the mtb scene, are you referring to zip ties and an inner tube?
whats the best way ro go about the process?
Albert francis Yes, thats it. Simple
Dangit seth, you posted this vid right as i got home from getting my paycheck. I now know what to spend my money on hahaha
Luckily you won't need to spend much!
flamezor123
I know that this was 5 years ago but I still love it as a newbie. Also the pacing with 10 tips in 7 min is refreshing. PS I did all the mods this past year and they are still good tips (especially in ongoing covid isolation)
If you have disc brakes, remove the reflectors from the spokes and put a few pieces of reflective tape on the rim.
This is something Seth should have included, cheap and actually useful as opposed to cosmetic
what have disc brakes to do with reflectors?
Johannes Nilsen If you have rim brakes, the reflective tape will get in the way of your brake pads. You're better off making little reflector tape flags on a few spokes in that case.
Scott J of course I though you meant spoke mounted reflectors, but I broken some of those, I never ride with reflectors anymore,but not st tried reflector warping wheels yet.
or the tire valve covers that light up work equally as well
-Unused- inner tube as chainstay protector look even cooler :)
YourNickIsTaken used or unused still cool
YourNickIsTaken You beat me to it! Not only cheap but it also dampens that annoying "clank" you get from the chain slap.
AJ MAC lol I have a DH tube on my bike's chainstay!
M T , yeah good idea Bro 👍 in some countries it's also called "self laminating tape" or "self vulcanising tape". It's not sticky either so it doesn't leave any residue behind
RSA Jay. Instead of using electrical tape on your change stay use Self-Fusing Silicone Tape instead. It last a long time and works great. The only down side is that it doesn't come in very many colors. I've see white, red and black, but there might be other colors.
I use this www.amazon.com/Emergency-Repair-Tape-Self-Fusing-Silicone/dp/B00KBSWRDO
I'm big fan of your super cheap mtb upgrades video series. 👍
You can use an old inner tube to protect the chainstay and makes your bike quieter over rough stuff
Pro tip for zip ties: use a fingernail clipper to cut off the excess. This will get the tails ultra short and won't be sharp!
Cutting edge pro tip!!
velotunes wow that's something I never thought of. Thanks for that tip!
Velotunes really I use proper snips.nail clippers lmfao
A knife does the best job. You can cut it all off perfectly.
You people are very very ill !!!! 😂😂😂😂😂
Jo Seth! Great videos! I have a hack for you. If you don't want to wrap your chainstay with 3M tape, grab an old and damaged inner tube, cut a 20 inch piece from it and wrap it around your chainstay. Secure it with zip ties. This protector will last forever
if you don't like end crimps at all, you could solder the cable ends
Also make it more recognisable if it ever gets stolen... be an amazing coincidence it's the one exactly the same coloured cable ends an dust caps.. 🤔
I put strong tape right beside the handle bars, and my bike is small and green so i can remember what it looks like
exactly. A thief won't steal a bike that's hard to sell
@@KiLLJoYTH-cam So, I just make by bike ugly as possible? Check.
I PUT mini gps in all my stuff. i use outside.
Just spent all my money on a new Norco Storm this video is invaluable awesome tips and very well put together. I just subscribed!!
The dork disc potentially saved me about a month ago. A small mishap on the trail (off the side of the trail and into a creek) knocked my derailleur out of adjustment. A bit further down the trail and thought my chain came off, only to find that the chain was riding between the cassette and the disc. While I don't know how much damage was avoided, I do know a quick adjustment on the side of the trail and I was able to make it home to properly adjust the derailleur without having to spend any money on repairs. Function should never take a backseat to appearance.
fuck off
@@CUZC0M salt?
This is me right now. I have no money and this helped me. Thx!!
Your choice of words is fenomenal
Next on 10 cheap upgrades for your mountain bike:
Multicolor wheels
3months and I'm Still recovering financially 😉
“Still you want to spoil your bike, but you’re totally friggin’ broke.” The way Seth says this sums up why I love Seth and this channel, and only mildly care about mtb 😂
Informative, but there are places called 'local bike shops' to get bike parts and accessories. Not just Amazon.
Bike shops often times charge a lot more, defeating the purpose of a cheap upgrade.
bike shops are now more of a snob starbikes. Everythibg is a premium. Its better to bit by bit equip your homemade repair center.
Or local s-market
Why would you ride your brand new bike lol
It's a joke kid
EXACTLY!!!!
oooooh!!!!!!!!!!!!!!!!!!!!!!!!!!
That's a horrible joke 😓 bikes are meant to be ridden!!!!!!
Nice one Felpel102!!!
One of the best MTB channel
These are not really "upgrades" these are customizations.
Carbon Fibre Spacer and the Zip ties might count as upgrades as one makes your bike *wAY liGHteR* and the *pRo zIptIEs* keep the brake cable attached to the frame.
true but its a video on cheap mtb stuff, you have to spent $100+ on any performance part
Orange and Blue, it’s a McLaren!
*for the F1 Fans*
That’s what I said!
That’s what I said!
it has a sigma notation and an infinity symbol, It's a MacLaurin series!
for calculus fans
McLaren is white and red. Blue and orange is a temporary rash on it's bottom
@@porscheoscar oh i see... 1995? Hakkinen?
Man, I love your channel! Every video is cool and calming.
You are by far the sickest TH-cam out there! What full suspension trail bike do you suggest that I get? Try to keep it around the $1500 range though! Great job!
Thanks! To be honest I think Greg Heil's article on this really hit the mark: www.singletracks.com/blog/mtb-gear/buyers-guide-budget-full-suspension-mountain-bikes/
Carter & Dayson's Biking as
Look into direct sales models from Chain Reaction or Jenson to get some really sweet deals. Also look into VITUS or Cube bikes-- really cheap, great spec, high quality. Giant is also an awesome brand that you can find at a local dealer. If you live outside of the U.S check out Canyon (although they should be shipping to the U.S in 2017). If you're a first timer I would highly recommend you get a hardtail though. More Value, less cash, lot of fun, helps you progress.
In the UK Cube bikes have took of in a big way. But when it comes to wheels go Mavic. I bought a set of Cross Rides a few yrs back when they just came out. Real sweet wheels
Love the video. Simple, cheap yet effective
Yeah, these cheap upgrades are actually something I may actually do or utilize, he really did well here!!! Its really hard to be original since gmbn makes a video a day!!
MTBdropIN yes I know what you mean! I think he did great. I may have to try sone
MTBdropIN GMBN doesn't do very many videos with hacks like this though
i needed this soo bad 🤣🤣👌👌
I'm not even joking when I say this the first 17 seconds of the video are all true completely true he truly understands me
seth you should do a video on how to lube the chain and gears!
Great vid, great comments and music too. Love the use of the Orange p7 as a devotee of the brand for 35 years from the other side of the pond. 👍👍
2:38 Haha no way i just ordered these yesterday!
“All high end bike come with them (lock ons) pre installed”
My $249 Schwinn Boundary came with them!
Schwinn IS high end. You just got a budget version of a high end product line. It's still not cheap, it's lower end from Schwinn.
Seth’s life hacks are the only one that works
Zip tie a piece of an old inner tube onto the chain stay to protect it from chain-slap.
What can't inner tubes be used for ha
JB Bike a condom... wait... 😂
Aaron Doyle gubbins lmao
grip tape will trash fingers of your gloves
John Nickerson I have grip tape on my dropper remote. 3 months later gloves are still fine.
Chris Barger have on shiftier, half season hole in finger and thumb
John Nickerson I used to think so as well, it feels that way when you try it for the first time, but it turned out to be fine, I see no increased wear on the glove fingers after 6 months.
i used to have skin, now i just have bones to press my shifters with xD
then put tiny plastic pads on the gloves. better if its custom made, and if it looks clean.
Dont use sandpaper on the shifter your just going to make your thumb and fingers sore, red and bleed if you constantly using them or if your finger slip. And dont use it for a chain stay as this will slowly wear away the chain as it hits the frame.
I bought a 2019 Cannodale Jekyll, it's going to be a while before I recover lol.
Bought myself the zipties, carbon spacers, and the cable ends for my Cervelo!
what model is your cervelo
MrAlexanderHwang bikes are so simple
Amazon echo dot hookup
In dusty conditions cut out a strip of furnace filter about 15” x 4”; zip tie it to the frame support just behind the front wheel; small piece of tape keeps zip tie from sliding; now I don’t need to wear uncomfortable dust mask and the filter is super lite.
MrAlexanderHwang I
I'm really satisfied with myself I did the zip tie cable tidy up trick before I even knew it was a proper Cheapo bicycle tip.
When i was kid made a tail brake light to signal the rider in the back
That's cool and all but I can't seem to remember when anybody asked?
@@SRNAR8 fuck off will you no need for that
The dork disc is something I will never take off my bike! I love my bikes and they are very well maintained. But my chain has shifted off the cassete and would have destroyed my wheel. I smashed my derailluer on a fast descent and shifted off the cassette by accident, it was a broken hanger and derailleur but could have been much worse. I learnt a lesson that day.
If the high/low limit screws are dialed in the chain should never shift off either the rear cassette or front chainring.
My dork disc cracked and flew off. I checked online and bike shops and they cost $15 to $25!!! I finally found an unchained abandoned rusty bike with most of its parts stripped off...took it home and removed it's dork disc and put it on my wheel. Put what's left of that bike on the curb and by the next day some metal collector took it away.
Forgot to mention...I did that because I've heard of horror stories of a perfectly set rear derailleur or the chain popping off and completely breaking the spokes and mangling the wheel.
Max fine be a noob then
@@metalhalide4043 ...unless the derailleur gets bent, which is exactly what he said happened.
Thanks guys this will help me out a lot because I just got into MTB properly.
You should ALWAYS have a valve cap fitted, it prevents dirt getting into the valve.
I textured my shift levers using a wood burner.
You stippled your shift levers? lol
Yup works like grip tape but never comes off.
MotoOutdoors good idea. Done it to a p320 grip module, would have never thought of doing it to my shift levers haha
MotoOutdoors an old BMX trick is to use gripper pen rubber gripper piece on the brake levers to cushion them a little
Yea a friend wanted me to do it so his Glock gen 3 so I was looking for any plastic pieces to practice on lol
Awesome work Seth, I get cred on the trail now when I hang out with the bros there, thanks to following these tips. Now that the dork disc has gone and the addition of odd color cable end and ties, it has turned my life about, but now broke due the cash outlay with all the added bling, I cant wait to waste my life with trying more useless tips.
bit of a dick comment, people like modding bikes, these are some good cheap mods.
some or most neoprene chain protectors are not good, and will wear out fast,and side backwards,the best method is to cut a tube on the side and wrap it on the chain stay(s). it works on all frames,and you can get the perfect length.
Dork disk is useless,but with proper rear dérailleur adjustment you don't need it, but eve nif you adjust it it will get loose quite fast,so Loctite the Rear dérailleur screws(and any other screws on your bike),temperature changes & vibrations will loosen bolts and screws so Loctite them!!!.
personally i like my chainstay protector. it almost eliminates chain rattle and looks really good, i have a race face one.
"everyone knows that carbon is always better" as an engineer I agree 😆
Nice video mate
Simple concept and explained with a touch of humour
Well done
From the Land of OZ.
I wouldn't recommend the metal valve stem caps. Metal expands and contracts so a metal to metal connection can seize, especially if there is grime, salt, or corrosion.
Unless you feel like lubing your stem caps to avoid that, stick to plastic.
grip tape to protect your chainstay is a terrible idea. You'll just wear your chain out prematurely.
Slip tape would be good there. lol
That’s why you can just buy a new chain.
maybe you think that but for some people its useful
Odyssey plastic Pedals were the best pedals I ever had, and you get them mostly under twenty Euro/Dollar.
I am 1,93m, 95kg and broke my cranks with a lifetime warranty, but the pedals after 10 years are still alive on my BMX...
NOTE: Aluminum bar ends hurt when they hit you in a crash more than rubber or plastic
What's a crash?
Not much, but they make terrible noise on the street
We all know that cool colors make us go faster.
Carbon not always better? Just ask a roady :P.
Oh yeah, the red bike theory is as peer reviewed as quantum theory. :D Actually perhaps if your bike is pimped out you tend to work harder not to embarrass yourself. Except if you're Fabio Wibmer in which case back flipping granny's bike is way cooler.
I don't even have a red bike sadly. But yes a nice looking bike is faster, like you said don't wanna look like a rich guy that can't put skills where his money is.
boomerangfreak we are foking doomed then since most bikes come these days in stealth black
For the plastic disc behind derailer
An old trick for securing it on better is use a soldering iron to melt holes into it then you can zip tie it to the spokes
It beats those silly plastic nob ends for sure!
I do that for some of my clients when doing tune ups if they tell me they ride trails yet want to keep them on
😟
I’ve already seen this video like 4 times no regrets
Edit: now 7 and still counting
Same here
Only 4?
A few coloured spokes to add a unique "custom" look
+Andrew Rogerson good one
are u indian???
1.Change your C-clips and tie your brake cables together with zip ties
2. Put tape around your chainstay
3. Change your grips
4.Change your bar ends
5. Lube your drivetrain
6. Put grip tape on your levers
7. Change the silver cap on your brake ends
8. Remove your dork disc
9. Change your valve stems
10. Replace your stem spacers
You should do a video on why you use dropper posts,or the best for the money! Just an idea tho