If you already have an older non-MOS Glock, I found a place called BattleWrx that will mill your slide to fit this optic for about $160. On 10mm and .45 pistols they can leave the rear sights in their original positions (or remove them if you prefer). In 9mm weapons they can move the rear site up just in front of the optic or just remove the iron sights completely. Worked great on my G19 Gen 4. They will also refinish the slide for a small fee.
that's interesting, right now i have another glock 19 no mos, but i want to mill it for 407 507k sight for the new eps and try it for another review as soon as possible
I put that Holosun on my 19 MOS and have about 200 or so rounds in without any issues. I like that it was a direct fitting with no plates required. How do you like that light?
thank you! 43x is more suitable for carry in summer days (with light clothing for example) is noticeable narrower, 19 is all around pistol, good for range, duty and carry! Previously i had a 19, when i saw that sight 4 months ago in shoot show, i already knew, this sight is a must have for this platform!
Purchased an SCS MOS that lasted about 3 weeks, and 50 rounds before it mysteriously stopped working. Shipped it back to Holosun just to find out that their warranty dept is backed up 1-2 weeks+15-20 day turnaround. Should have stuck to the proven RMR.
@@stemapo94 I hope ours were the exception since I really like how low it mounts. Mine stopped working similarly to yours, pressed the button and came back on, then next day it was completely dead. I am supposed to get a replacement soon. According to what I was told by the rep, they take about 30 days before sending a replacement. I had an issue with Vortex once, and I had a replacement in less than a week.
@@bankruptremy4987 no...the battery is not replaceable, 50k hrs only with a 3 4 days of sun light charge, and yes... no shake awake, so it will be always on
If you already have an older non-MOS Glock, I found a place called BattleWrx that will mill your slide to fit this optic for about $160. On 10mm and .45 pistols they can leave the rear sights in their original positions (or remove them if you prefer). In 9mm weapons they can move the rear site up just in front of the optic or just remove the iron sights completely. Worked great on my G19 Gen 4. They will also refinish the slide for a small fee.
that's interesting, right now i have another glock 19 no mos, but i want to mill it for 407 507k sight for the new eps and try it for another review as soon as possible
They have my side now
Mine’s been there five weeks now, surpassing their stated turn around times. Reputation is they do good work though. Waiting….
Mine’s been there five weeks now, surpassing their stated turn around times. Reputation is they do good work though. Waiting….
Mine’s been there five weeks now, surpassing their stated turn around times. Reputation is they do good work though. Waiting….
Two weeks. On mine. Glowing bright green, no issues. Love the co witness.
co-witness is my only worry... I want minimal co-witness with stock height sights, I'm worried they co-witness high.
I put that Holosun on my 19 MOS and have about 200 or so rounds in without any issues. I like that it was a direct fitting with no plates required. How do you like that light?
Trying to decide between the Glock 19 and 43x. Leaning more towards the Glock 19 and now even more towards the MOS version! Good video!
thank you! 43x is more suitable for carry in summer days (with light clothing for example) is noticeable narrower, 19 is all around pistol, good for range, duty and carry! Previously i had a 19, when i saw that sight 4 months ago in shoot show, i already knew, this sight is a must have for this platform!
Look around pawn shops. Took me a while but I ended up finding a 43x MOS with Ameriglo night sights already installed for $419
Purchased an SCS MOS that lasted about 3 weeks, and 50 rounds before it mysteriously stopped working.
Shipped it back to Holosun just to find out that their warranty dept is backed up 1-2 weeks+15-20 day turnaround. Should have stuck to the proven RMR.
Same here! Mine it stopped working after one or two magazines, but if I pushed the button, it restarted… I requested a full refund
@@stemapo94 I hope ours were the exception since I really like how low it mounts. Mine stopped working similarly to yours, pressed the button and came back on, then next day it was completely dead. I am supposed to get a replacement soon. According to what I was told by the rep, they take about 30 days before sending a replacement. I had an issue with Vortex once, and I had a replacement in less than a week.
Awesome rig
great video does it require suppressor sights in order to co witness.
No, the standard are usable with the sight without problem
Doing a build just like this
How bright is the dot really?
Really really bright. The auto brightness is spot on
No shake awake? This is kinda crazy. Are you supposed to just leave it on 24/7 for those 'just in case' moments?
With the battery lasting 50,000 hours, you won’t care. Just replace once a year if you’re worried about it
@@bankruptremy4987 no...the battery is not replaceable, 50k hrs only with a 3 4 days of sun light charge, and yes... no shake awake, so it will be always on
@@stemapo94 yes you are correct about not being able to change the battery my bad, but if you edc it then I’m sure it will last a while.
Oh, Remy. You’ve more $ than me, if you can replace this sight every year.
It does shake awake, Shuts down after 10 minutes
What iron sights are those?
They are Tru dot from Meprolight
@@stemapo94 Awesome, thank you!
Is this too big for g48 mos cutout?
yes... maybe in future we will see a model for the 43 48 model...
Is it compatible with Glock 34?
all mos full size slide glock, so i think yes it is
Yes it is. I put one on my Glock 34 and it fits perfectly
Top video
german "beschusszeichen" ;) where do you live?
I'm live in italy, i think the glocks comes direct from Austria so...
Thank you for the comment and the views
@@gunsnroses5991 i let a gunsmith make the cutout on my gen 3 for a reddot. i think it will be the holosun like yours.
What iron sights are those?
meprolight tru dot