I started running tactical courses with a box stock G17 MOS. Added some DIY stippling on the index points, then an RMR and x300u. Later, my main instructor added front cocking serrations to my slide and it's done. I'm over 10000 rounds now with ZERO issues. I don't find the stock trigger to be a hindrance, and don't want to risk reliability with trigger mods. I'm currently setting up my G19 the same way.
I like that you said that keep seeing all these aftermarket triggers and bought myself it would be better to learn with stock. It’s built that way for a reason especially for self-defense. Glock purposely put that long pull with a 6 pound break on their guns for a reason it’s from what I’ve been told for self-defense situations you have enough time to either firel or stop the break before a threat decides to retreat. Also, learning with the stock trigger makes you a better shooter. I finally bit the bullet and switched to a 2023 timney And had it installed by my boys at wild West guns in Alaska who did a little extra work on it. Apparently people who self install their timney don’t understand that if the trigger bar isn’t connecting with the connector properly it will go brrrrrrrrt for those who don’t know how to do it super dangerous. I’m very intimate with working on triggers still had it installed by a professional gunsmith just so I can use it as my EDC with confidence. had them test fire and test it for drop safe. I only bought that trigger because it was $100 they came down they used to be like 300.
I never considered the slide texture to make it easier to grab. Noted. Thanks! I'm looking at 3D printing a glock, and since I'm starting from nothing, I gotta research mods since I could just buy mods to begin with :D One of the main reasons I want to 3D print one, aside from the cool factor, is the fact I can just print it with the stippling
Great production! I keep my G19 Gen3 bone stock except for a Surefire light. It's a defense gun, and I would hate for 12 people too dumb to get out of jury duty to decide my fate after being presented with how "unsafe" light triggers are by a competent prosecutor. For a range gun though?...sure, go nuts.
Outstanding video! I've never taken notes on a video of any type until now (I own 5 Glocks from 380 to 10mm). Nice to get straight talk from a real user. Thanks!
Great video. FYI, I upgraded my 1911 barrel years ago from the stock Colt to a Briley fitted barrel and noticed dramatic improvement, shrinking my groups by nearly 2.5”. Then I upgraded my Gen 2 G19 barrel from OEM to fitted Bar-Sto barrel, and DID get an improvement, but this time barely an inch or so, which really wasn’t worth the cost. Going forward I’ve bought KKM barrels so I can shoot lead reloads, but haven’t noticed groups shrinking all that much. I do always buy Wolff guide rods and springs for all my Gen 3’s (stuck in CA which is why I can’t own that G45 and with a 10rd limit it makes no sense anyway) so I can quickly change spring weights or swap in new springs. I have all the frame mods, but will have to check out the Vickers slide stop / mag release controls. I didn’t get them because I was paranoid about accidentally dropping the mag. Thanks for the excellent well-produced overview.
Good vid. I've found over my now 30 years of shooting as an adult, including 14 years in LE (6+ as an instructor), that too many people try to focus on the gun's abilities vs their own fundamentals. I can't tell you the number of times I've heard people blame their gun, or a brand of gun, and wave off their own faults. Too many people go overboard on "upgrades" when they're not to the point of making the most of those upgrades. If people can't pick up any pistol, and have the basic knowledge of how to use a pistol proficiently, then no gadget or "upgrade" is going to help. Case in point: leave the gadgets on the shelf until plenty of time has surpassed, sound fundamentals have been learned, and thousands of rounds have been fired with good accuracy results. Also... some advanced training would be good too. ;)
The only thing I’ve ever changed on a Glock and actually noticed a difference was installing one of those Glock performance triggers. It didn’t feel that different put it sure made me shoot better
I like the look of the stock Glock 19 Gen 5. Kinda just want to get my ACRO cut done, and have my X300 on it and be done with it. Porting would be nice, but it isn’t even necessary.
Man I love these vids. Started on your range bag and binged watch to this one. I can say these edits are sick and props to the camera man for those angles. Keep it up man, these help me out a lot
Stumbled on your channel… now I don’t feel bad cause I was thinking it was just me that thought the mag release on this thing is exceptionally hard… lol… definitely gonna look into swapping that thing out… great review! Subscribed! 😎🍻
Just found your channel; You blend a few channels together... Noir, Pew Pew, TFB - but you do it well. Find a niche or something that separates you - and watch this one will take off. Very nice work.
My guns for carry are simple I pretty much add nice irons. That is all you should really need. For my range guns I like to fuck around and put optics and fun triggers etc.
I had intended to send a couple Glocks to KAB Defense and they apparently went out of business while I was waiting for the Glocks to arrive. I love Gucci Glocks although I love stock Glocks too!!!
FYI the terms Slide Lock & Slide Stop (Release) are not interchangeable. One is to take the slide off, the other is to stop the slide in the open position on the last round (or to release the slide from its open position once a reload has been done).
If I ever get a Glock 19 (must be gen 3 since I’m in CA), I’d want to at least 1 part of that gun be in a rainbow color (either slide or barrel). I just hope the color will not fade and get worn out nor and hope it won’t cause reliability issues. I’d definitely change the sights to glow in the dark and add a gun light at least.😊
My only mod is the sights, I’m too chicken to mess with the reliable Glock factory setup. And it’s a gen 2 G19 probably worthless in value but it works.
Awesome video. Glad I ran across you. Would you recommend just buying a shadow system mr920? I like customizing but it just seems more expensive to buy a Glock and pimp it out
Thanks man. Yea building out a Glock like this is definitely more expensive, but it really just depends on what you're looking for. The Shadow Systems are legit, and so is Zev. If they feel good in your hands out of the box I'd go for it.
Thank you-Great video. I agree with most of what you said. The end game-Personal preferance & what works for you. I feel it can get real easy to go overboard on mods. Just ask Lenny McGill at "The Glockstore"-Whatever he is selling at "The Moment" is very important. Just ask him. He will take a 500.00, and in the end from cases trigger pull devices -to include but not limited to- turning your Glock 17 (9mm) into a short barrel rifle, placed into a 500.00 pice of plastic-which breeds another 600.00 worth of additional "Items", you simply can not live without.-Super video. I have subscribed and hope you keep up the excellent content with you HONEST videos.
Why doesn’t Glock incorporate the under cut into the frame since everyone does it. Other pistol companies like CZ, Mossberg etc watch the mods high level shooters make and incorporate them into new designs. The Shadow 1 came out of that.
I'm not trying to be a killjoy, but I don't find any of those things necessary...I have xl hands, shoot a stock G19 (with night sights though) and have no problems hitting what I'm aiming at...Just practice and you'll do the same.... But mod away if you enjoy it....I certainly understand that
I’m looking for a similar set up, with my optic being the holoson 507c-gr-x2. Possibly a TLR 8AG or a olight baldr. I’m having an extremely difficult time, finding a holster to fit these accessories. Whether that be owb iwb or shoulder. I’d greatly appreciate it if you could give me some help.
I definitely like the looks of a stock Glock. I think the simplicity is sexy. Safety switches and de-cocking levers and toaster oven attachments look too tacticool to me. If anything I’m putting a red dot on and leaving everything else the same.
I've carried a glock as a duty weapon for over 30 years and have bought several glock models in different sizes and calibers. That being said, I think i can speak with an honest amount of expertise. Glocks are combat weapons that for the most part are great right out of the box. It's been my experience to swap out the trigger, and the sights! Just those two upgrades, will serve you quite well. Everything else is just gravy. Great video sir. I found it very informative and enlightening. 🙂👍❤️
For your duty weapon what ammo did you use? Also Great comment by the way, I couldn’t agree more with you. The firearm right out of the box are hands down the most reliable and only gun I trust. If I had to pick any gun straight out of the box, never having tested it touched it or seen it to save my life in an emergency hands-down would be Glock. 100% trust with my life. Stack that on top of the fact, a lot of companies are copying their style shows how combat ready and reliable they are. I remember when I was a kid my friend Mom became a reserve officer. IT was the first time I saw a Glock I believe I was 12. on My 21 birthday I bought a sub comp. Gen3 g27 .40 cal. Such a tiny gun but so accurate it’s amazing how they stayed the course of subtle changes but better improvements.
for ammo I always ask what my local PD is using, that way some scumbag lawyer or DA cant pull the "because he used these type of bullets hes a bad person" type argument. Sounds ridiculous I know, but it has happened many times.@@AlaskaChromeProductions
Nice video, well organized format. I think your format, chapter sections, and information are setting a new “high bar” for TH-cam channels. I really liked your perspective on barrels and guide rods. I couldn’t agree more. Training is paramount over Gucci items.
Thanks. I never liked being forced to watch all of something when only a small portion or two actually applied, or feeling clickbaited into watching a video, the chapter markers help with that I think especially with long videos like these.
@@PrincipleCaliber Yeah man, it's super convenient, I'd also compliment you're explanations, you were very good at telling us about each part and its functionality as well as why you liked it. Great video!
how many times do you/we? they? repeat the word training while avoiding supporting corporate entity+ great quality video its a damn shame that comment section couldn't be more constructive and proactive without overselling mens hair gel
I'm glad I stumbled across your video. Very well presented. You seem like a smart, articulate guy and I look forward to more of your stuff. Liked and subbed.
I am a fellow G:45 owner myself. It's my EDC, I find the fit beats the 19 for my hands and with my body type I can carry the larger frame without issue. All I have done to her aside from a few hundred rounds, are basic trijicon night sights. I dig the cuts for the grip and guard, that is new info to me. I grew up with the M9 as a sidearm in the Army, really enjoying striker weapons now.
I too am a fellow g45 edcarrier. I wanted mine to be a black 19X clone….so I did the Glock oem maritime spring cups. All 3 17 rnd mags now have oem glock +2 extensions…and a black oem glock lanyard ring. I went with an ameriglo cap front sight (luminous green square with single dot tritium) and “protector” rear (2 tritium dot with anti glare serrations). I am an iron sight believer….but I do also have the Olight Baldr S 800 lumen wml with green dot laser. All of which sits in a “gun & flower” iwb kydex holster. Smooth & mean with federal LE HST JHP 147g poppers. 19+1 and another 19 in my carhartt carpenter pant mag pocket…lol sliding ruler pocket fits a couple mags perfectly!!!
You seem practical, pretty down to earth, and straightforward, but still put a lot of effort into the vid. You're not tying your worth or Identity to a gun, and you're also honest if it's just personal preference. Absolutely subscribed man.
Tritium sights were designed for dusk and dawn when low light is an issue picking up your sights. We were issued them directly from Glock when we transitioned to these weapons in 93,and they were invaluable for one handed reloads during wounded drills and also because they were so intuitive in those two small portions of the day when your sights are tough to pick up
I've used a few brands on guns since 1997 or so. My top picks are Ameriglo 3 dot, Trijicon. The HD orange night sights are bright, easy to use. I'm not a big supporter of fiber optic tubes.
1:43 The white Colion Noir is in the building 👏👏. Also, love the step by step breakdown I often get confused when the pros rush through their modifications. Please do this for other types of firearms.
I started with an rmr shot my first competition as switched to an sro. The tone of practice I had with the rmr was worth it. Once switching to the sro it felt like I couldn’t lose the dot. The sro is the way to go but training with something smaller first happened to benefit me greatly.
Just purchased my first ever Glock G21 Generation 4 back at Christmas. Overall I love the pistol. The only modifications I am planning on making on it are definitely the sights. As far as the trigger goes I’m ok with it. No it’s certainly not a 1911 trigger but I have pulled worse triggers. Great video & subscribed!!
What are your favorite pistol mods?
Sights, Ammo and more ammo.
For Glock my favorite is to mod the sights and grip never mod out any stock internals, That's just me.
That vickers mag release work with Gen 5’s like the 45?
Red dot & Stippling
Vickers extended slide release and mag button for 19, 21, and 36. My 19X is bone stock!
Rest in peace, Gaston Glock. An outsider from the industry, stepping in to completely change it’s standards.
A revolutionary
Homie needs to modify that haircut
I was thinking the same thing 💀
You hell 😂
On gang
@@nolleyflipain’t shyt 😭😭😭
Nah bro that shi is crispy he rocking it. Commenting on a mans hair is weird
this guys production value is better than collin noier, why does he have only 13k subscribers
Well done. Definitely not a boring video for being this long. Tons of good information.
I started running tactical courses with a box stock G17 MOS. Added some DIY stippling on the index points, then an RMR and x300u. Later, my main instructor added front cocking serrations to my slide and it's done. I'm over 10000 rounds now with ZERO issues. I don't find the stock trigger to be a hindrance, and don't want to risk reliability with trigger mods. I'm currently setting up my G19 the same way.
I like that you said that keep seeing all these aftermarket triggers and bought myself it would be better to learn with stock. It’s built that way for a reason especially for self-defense. Glock purposely put that long pull with a 6 pound break on their guns for a reason it’s from what I’ve been told for self-defense situations you have enough time to either firel or stop the break before a threat decides to retreat. Also, learning with the stock trigger makes you a better shooter. I finally bit the bullet and switched to a 2023 timney And had it installed by my boys at wild West guns in Alaska who did a little extra work on it. Apparently people who self install their timney don’t understand that if the trigger bar isn’t connecting with the connector properly it will go brrrrrrrrt for those who don’t know how to do it super dangerous. I’m very intimate with working on triggers still had it installed by a professional gunsmith just so I can use it as my EDC with confidence. had them test fire and test it for drop safe. I only bought that trigger because it was $100 they came down they used to be like 300.
Honestly, anytime someone tells me they want to get a Glock and customize it, I just recommend they get a Shadow Systems pistol and call it a day.
Everyone came for the Gucci Glock, they stayed for the amazing editing 👍🏼 won a sub off this video alone great job
i think a light is single handedly the most important mod. you have to be able to see what you're shooting. period. gotta get a positive ID
Underrated channel.
The editing on this video is insane. Reminds me of the visuals of a video game called control
This is one of the best educational videos I’ve ever seen. Can’t wait to see more of your content sir. 👏🏼
That beat during the B-Roll part is so damn dope.
damn dude that b-roll at the beginning was absolutely gas!!
Great video: style, setup, information = all top notch! Please, continue with this style of video.
Phenomenal content sir!! Love the editing and cuts - Subscribed and excited
I never considered the slide texture to make it easier to grab. Noted. Thanks! I'm looking at 3D printing a glock, and since I'm starting from nothing, I gotta research mods since I could just buy mods to begin with :D One of the main reasons I want to 3D print one, aside from the cool factor, is the fact I can just print it with the stippling
Hey, great video I was bored and saw the nice Glock and decided to watch this I am an LE guy and appreciated and enjoyed this Nice job
Editing is immaculate sir.
Great production! I keep my G19 Gen3 bone stock except for a Surefire light. It's a defense gun, and I would hate for 12 people too dumb to get out of jury duty to decide my fate after being presented with how "unsafe" light triggers are by a competent prosecutor. For a range gun though?...sure, go nuts.
Outstanding video! I've never taken notes on a video of any type until now (I own 5 Glocks from 380 to 10mm). Nice to get straight talk from a real user. Thanks!
Great video. FYI, I upgraded my 1911 barrel years ago from the stock Colt to a Briley fitted barrel and noticed dramatic improvement, shrinking my groups by nearly 2.5”. Then I upgraded my Gen 2 G19 barrel from OEM to fitted Bar-Sto barrel, and DID get an improvement, but this time barely an inch or so, which really wasn’t worth the cost. Going forward I’ve bought KKM barrels so I can shoot lead reloads, but haven’t noticed groups shrinking all that much. I do always buy Wolff guide rods and springs for all my Gen 3’s (stuck in CA which is why I can’t own that G45 and with a 10rd limit it makes no sense anyway) so I can quickly change spring weights or swap in new springs. I have all the frame mods, but will have to check out the Vickers slide stop / mag release controls. I didn’t get them because I was paranoid about accidentally dropping the mag.
Thanks for the excellent well-produced overview.
10 seconds in, that cut for the Glock, you gave my attention sir.
I just purchased a tungsten guide rod and can now hit 1” groups at 100 yards! They are awesome!
A video to make your glock better. wow I'm so excited
Trijicon tritium sights, Apex trigger, Talon grip, Danger Close fluted barrel 👍
Good vid. I've found over my now 30 years of shooting as an adult, including 14 years in LE (6+ as an instructor), that too many people try to focus on the gun's abilities vs their own fundamentals. I can't tell you the number of times I've heard people blame their gun, or a brand of gun, and wave off their own faults. Too many people go overboard on "upgrades" when they're not to the point of making the most of those upgrades. If people can't pick up any pistol, and have the basic knowledge of how to use a pistol proficiently, then no gadget or "upgrade" is going to help. Case in point: leave the gadgets on the shelf until plenty of time has surpassed, sound fundamentals have been learned, and thousands of rounds have been fired with good accuracy results. Also... some advanced training would be good too. ;)
I couldn't agree more.
The only thing I’ve ever changed on a Glock and actually noticed a difference was installing one of those Glock performance triggers. It didn’t feel that different put it sure made me shoot better
I like the look of the stock Glock 19 Gen 5. Kinda just want to get my ACRO cut done, and have my X300 on it and be done with it. Porting would be nice, but it isn’t even necessary.
How my guy got 81,000 views on this video and just 4,000 subscribers you people are big haters show the guy some love
Man I love these vids. Started on your range bag and binged watch to this one. I can say these edits are sick and props to the camera man for those angles. Keep it up man, these help me out a lot
Thanks man! Glad you enjoy the channel. 🤙
That really is some slick as hell editing, props for putting the work in
Stumbled on your channel… now I don’t feel bad cause I was thinking it was just me that thought the mag release on this thing is exceptionally hard… lol… definitely gonna look into swapping that thing out… great review! Subscribed! 😎🍻
Yea mon..it hard..it hard..it hard. But don't worry be happy...because your Glock will never...Be Jammin.
Just found your channel; You blend a few channels together... Noir, Pew Pew, TFB - but you do it well. Find a niche or something that separates you - and watch this one will take off. Very nice work.
Subbed due to quality of edit and info. Keep it up just put a trijicon rmr 2 and a streamlight tlr7 on my Glock 19 gen 5 and I’m loving it so far
I like your delivery style and knowledge, keep it coming.🤓
Barber: what we going with today bro?
Principle: give me that 1940’s Germany fam
My guns for carry are simple I pretty much add nice irons. That is all you should really need. For my range guns I like to fuck around and put optics and fun triggers etc.
Subbed within the first 15 seconds, just because of that edit and reaction 👌
Really nice video production!! I like the glitch effects! I am new to pistols (and Glocks) so I learned a bit from you. Thanks!
This guys intros are insane
Love to build one like it. Definitely gonna be the best $2,900 ever spent
I had intended to send a couple Glocks to KAB Defense and they apparently went out of business while I was waiting for the Glocks to arrive. I love Gucci Glocks although I love stock Glocks too!!!
Yep. RIP KAB unfortunately
My Dream Gun
This is an incredible video, nice job and not a bad looking dude so that helped keeping the focus. Thanks.
FYI the terms Slide Lock & Slide Stop (Release) are not interchangeable. One is to take the slide off, the other is to stop the slide in the open position on the last round (or to release the slide from its open position once a reload has been done).
Good to know, thanks.
I didn’t even know T-Rex made baseplates. Learn something new everyday!
They're made by Arrendado, but Trexarms sells them.
Wish we could do this stuff in Canada.
Excellent video ! Informative, concise, and organized. Thanks !
The hair is throwing me off
If I ever get a Glock 19 (must be gen 3 since I’m in CA), I’d want to at least 1 part of that gun be in a rainbow color (either slide or barrel). I just hope the color will not fade and get worn out nor and hope it won’t cause reliability issues. I’d definitely change the sights to glow in the dark and add a gun light at least.😊
This man earned my sub! Thanks for some good quality insight 👌🏾
I go with suppressor height iron sights regardless if it is suppressed
my favorite is the 19x and 45. the best pistols
Love this set up. You able to lead me where I can pick up that slide? I'm having a hard time finding it.
Fantastic presentation and opinions and recommendations
Great video! Thanks for the info!
Tungsten recoil spring and the trigger thingy polished forgot the name for it and better sights compensater cuts on the slide
Good editing, good info, no shilling for shit companies… Likes and subscribed!! Keep it up man!
I stipple my own pistols, using a wood burning tool, after the Dremel tool to grind away material.
My only mod is the sights, I’m too chicken to mess with the reliable Glock factory setup. And it’s a gen 2 G19 probably worthless in value but it works.
I actually do like the stock glock sights haha but I've been shamed for it plenty don't worry
Awesome video. Glad I ran across you. Would you recommend just buying a shadow system mr920? I like customizing but it just seems more expensive to buy a Glock and pimp it out
Thanks man. Yea building out a Glock like this is definitely more expensive, but it really just depends on what you're looking for. The Shadow Systems are legit, and so is Zev. If they feel good in your hands out of the box I'd go for it.
Vickers tactical is lit.
Thank you-Great video. I agree with most of what you said. The end game-Personal preferance & what works for you. I feel it can get real easy to go overboard on mods. Just ask Lenny McGill at "The Glockstore"-Whatever he is selling at "The Moment" is very important. Just ask him. He will take a 500.00, and in the end from cases trigger pull devices -to include but not limited to- turning your Glock 17 (9mm) into a short barrel rifle, placed into a 500.00 pice of plastic-which breeds another 600.00 worth of additional "Items", you simply can not live without.-Super video. I have subscribed and hope you keep up the excellent content with you HONEST videos.
I just got a Shadow Stystems xr920 to get out of the box upgrades!
Nothing beats an all black gucci glock
The Gucci gang instro tho, nice
I love glocks but I love it even more when other guns I get my hands on get addictive too. Like HK, Sig, etc.
Why not go with the medium back strap to make the length of pull better for your long pointing fibger
as someone who just fn likes youtube videos, it feels good to be recognized in a video lol...
Best upgrade cz75
Imo a stock Glock is the best Glock minus the plastic sights.
I swear I’m the only person who doesn’t like blacked out rear sights.
I go with Vickers for functionality, good choice.
Good info. I subbed
This here video just made me a subscriber. 🤙🏾
🤙👊
Really nice bro. I likey. Make me want to spend money on my Glock now lol.
Great video. I'd go 19 frame with 17 slide if they offered one.
Why doesn’t Glock incorporate the under cut into the frame since everyone does it. Other pistol companies like CZ, Mossberg etc watch the mods high level shooters make and incorporate them into new designs. The Shadow 1 came out of that.
Damn, that part changing transaction is so cool. How did you make that?
Does anyone know the beat/instrumental used in the intro of this video?
I'm not trying to be a killjoy, but I don't find any of those things necessary...I have xl hands, shoot a stock G19 (with night sights though) and have no problems hitting what I'm aiming at...Just practice and you'll do the same.... But mod away if you enjoy it....I certainly understand that
I’m looking for a similar set up, with my optic being the holoson 507c-gr-x2. Possibly a TLR 8AG or a olight baldr.
I’m having an extremely difficult time, finding a holster to fit these accessories. Whether that be owb iwb or shoulder. I’d greatly appreciate it if you could give me some help.
You got a new sub sir
im practicing my psychic abilities ... is this guy a former marine?
This is an extremely well edited video. Hats off man!
Thanks man 🤙
“Conrols” yeah good edit huh
Especially for a gun video
@@hebergomez1241 yu hatin for what
@@JustHimm05 tbh more like calling him out but i aint hatin
I don't mind a Gucci Glock but does anyone else just like the look of a stock Glock?
I definitely like the looks of a stock Glock. I think the simplicity is sexy. Safety switches and de-cocking levers and toaster oven attachments look too tacticool to me. If anything I’m putting a red dot on and leaving everything else the same.
Honestly, not really
Absolutely stock is the jock!
No, not a huge fan. It’s super functional, and so I like the feel, not the look.
I can appreciate the simplicity sometimes
Your framing/studio setup reminds me of camera gear channels
I watch a lot of that genre; my second passion.
Great content, you have a little Peter McKinnon in you ;)
@@PrincipleCaliber damn son you got z tier gun tubers checking you out. Good job!
I've carried a glock as a duty weapon for over 30 years and have bought several glock models in different sizes and calibers. That being said, I think i can speak with an honest amount of expertise. Glocks are combat weapons that for the most part are great right out of the box. It's been my experience to swap out the trigger, and the sights! Just those two upgrades, will serve you quite well. Everything else is just gravy. Great video sir. I found it very informative and enlightening.
🙂👍❤️
For your duty weapon what ammo did you use?
Also Great comment by the way, I couldn’t agree more with you. The firearm right out of the box are hands down the most reliable and only gun I trust. If I had to pick any gun straight out of the box, never having tested it touched it or seen it to save my life in an emergency hands-down would be Glock. 100% trust with my life. Stack that on top of the fact, a lot of companies are copying their style shows how combat ready and reliable they are. I remember when I was a kid my friend Mom became a reserve officer. IT was the first time I saw a Glock I believe I was 12. on My 21 birthday I bought a sub comp. Gen3 g27 .40 cal. Such a tiny gun but so accurate it’s amazing how they stayed the course of subtle changes but better improvements.
for ammo I always ask what my local PD is using, that way some scumbag lawyer or DA cant pull the "because he used these type of bullets hes a bad person" type argument. Sounds ridiculous I know, but it has happened many times.@@AlaskaChromeProductions
Nice video, well organized format. I think your format, chapter sections, and information are setting a new “high bar” for TH-cam channels. I really liked your perspective on barrels and guide rods. I couldn’t agree more. Training is paramount over Gucci items.
Thanks. I never liked being forced to watch all of something when only a small portion or two actually applied, or feeling clickbaited into watching a video, the chapter markers help with that I think especially with long videos like these.
@@PrincipleCaliber Yeah man, it's super convenient, I'd also compliment you're explanations, you were very good at telling us about each part and its functionality as well as why you liked it. Great video!
how many times do you/we? they? repeat the word training while avoiding supporting corporate entity+ great quality video its a damn shame that comment section couldn't be more constructive and proactive without overselling mens hair gel
I'm glad I stumbled across your video. Very well presented. You seem like a smart, articulate guy and I look forward to more of your stuff. Liked and subbed.
Much appreciated. Thanks for subscribing.
I am a fellow G:45 owner myself. It's my EDC, I find the fit beats the 19 for my hands and with my body type I can carry the larger frame without issue. All I have done to her aside from a few hundred rounds, are basic trijicon night sights. I dig the cuts for the grip and guard, that is new info to me. I grew up with the M9 as a sidearm in the Army, really enjoying striker weapons now.
I too am a fellow g45 edcarrier. I wanted mine to be a black 19X clone….so I did the Glock oem maritime spring cups. All 3 17 rnd mags now have oem glock +2 extensions…and a black oem glock lanyard ring. I went with an ameriglo cap front sight (luminous green square with single dot tritium) and “protector” rear (2 tritium dot with anti glare serrations). I am an iron sight believer….but I do also have the Olight Baldr S 800 lumen wml with green dot laser. All of which sits in a “gun & flower” iwb kydex holster. Smooth & mean with federal LE HST JHP 147g poppers. 19+1 and another 19 in my carhartt carpenter pant mag pocket…lol sliding ruler pocket fits a couple mags perfectly!!!
I also EDC a G45, all I’ve done was an OE “extended” slide release cause my thumbs were just a little too short, and then trijicon night sights
You seem practical, pretty down to earth, and straightforward, but still put a lot of effort into the vid. You're not tying your worth or Identity to a gun, and you're also honest if it's just personal preference.
Absolutely subscribed man.
Ok.. Now I want a Gucci Glock! Well done editing man! Sick content.
Thanks!
Tritium sights were designed for dusk and dawn when low light is an issue picking up your sights.
We were issued them directly from Glock when we transitioned to these weapons in 93,and they were invaluable for one handed reloads during wounded drills and also because they were so intuitive in those two small portions of the day when your sights are tough to pick up
I've used a few brands on guns since 1997 or so. My top picks are Ameriglo 3 dot, Trijicon. The HD orange night sights are bright, easy to use. I'm not a big supporter of fiber optic tubes.
1:43 The white Colion Noir is in the building 👏👏.
Also, love the step by step breakdown I often get confused when the pros rush through their modifications. Please do this for other types of firearms.
That would be Colion Blanco I guess 🤷🏼♂️
I started with an rmr shot my first competition as switched to an sro. The tone of practice I had with the rmr was worth it. Once switching to the sro it felt like I couldn’t lose the dot. The sro is the way to go but training with something smaller first happened to benefit me greatly.
Your video edits are legit bro.
Just purchased my first ever Glock G21 Generation 4 back at Christmas. Overall I love the pistol. The only modifications I am planning on making on it are definitely the sights. As far as the trigger goes I’m ok with it. No it’s certainly not a 1911 trigger but I have pulled worse triggers. Great video & subscribed!!