3D Printed Rotating Table - Arduino Nano and 28BYJ-48 Stepper Motor
ฝัง
- เผยแพร่เมื่อ 13 ก.พ. 2022
- Cheap & quick PCB, 3D Printing, CNC machining and fabrication services from PCBWay: www.pcbway.com/
This project shows how to make a 3D printed Rotating Table using Arduino and a hobby stepper motor. Take a look at the video and see what a simple project can do! This is a low budget and simple set up Rotating Table for product shots. The 3D models were designed by BasementCreations and shared on Thingiverse. 28BYJ-48 Stepper Motor and ULN2003 motor driver were used in the project. On the microcontroller side, an Arduino Nano V3 version was preferred. Besides the breadboard circuit, a printed circuit board (PCB) was designed for a more useful prototype.
Source code, Circuit diagram, PCB Gerber file, 3D STL file:
▪️ www.pcbway.com/project/sharep...
▪️ www.instructables.com/3D-Prin...
▪️ www.hackster.io/mertarduino/3...
▪️ Rotating Table 3D Parts - www.thingiverse.com/thing:481...
Thanks for watching... Don't forget to subscribe for support! - วิทยาศาสตร์และเทคโนโลยี
Source code, Circuit diagram, PCB Gerber file, 3D STL file:
www.pcbway.com/project/shareproject/3D_Printed_Rotating_Table_Board_with_Arduino_Nano_and_28BYJ_48_Stepper_Motor_ca5b53c9.html
Hi Mert!
I love your channel and your videos helped me in many projects so now I am very glad that you made one of my own creations!
Your designs are really good! Also thanks for sharing open source ❤️ By the way, I subscribed to your channel 🤖 Finally, thanks for the comment 🥂 Rotating Table 3D Parts - www.thingiverse.com/thing:4817279
Çok güzel eline sağlık 👍♥️♥️♥️♥️annecim👏
Thanks. I can see other applications for this.
I would love to know what sized bearings you used? Thanks in advance for your reply :)
Again 💯💯
Thanks ❤️
Project is nice... Musics are wonderful :)
Thank you 🥂 😇
Çok güzel bı proje olmuş harikasın ♥️♥️♥️♥️👏
Good project :))
Thanks 😇
Hey, nice Tutorial, could you do another one?
I need to dim a LED with the help of a LDR the more Light there is.
It needs to be activated with a Button.
I don't know how to do it, so I would really appreciate your help.
How many Amps are needed for the 5V power supply?
I want to do this projet but modify it a bit so I can lay a lithophane cylinder on this base.
Im trying to figure out the demand of these electronic components.
(I'll add some LEDs and will modify the top plate stl a bit).
Its for a Christmas gift. Any help will be appreciated.
Thanks guys!
Bro pcb way ka 10pc pcb kitne me para ??
Can I have a link for correct on off switch type? Thanks
what is the maximum load weight?
Can someone explain to me , why i have to use L7805ACV?
Ay quick question for you, is it possible to control servo speed in the adafruit pwmservo library? I am using the board the you showed in your 16 servo tutorial.
Please have a look here - learn.adafruit.com/16-channel-pwm-servo-driver/using-the-adafruit-library
@@maker101io Hey! First off, big fan of the channel! Second off, unfortunately this didn't give me any info on controlling the speed, unless there is a part of it that i missed. Is there any way to make the servo slower? Thanks!
I'd use an ESP 32 and control speed and direction via wifi web interface.
Good idea 👍🏻
@@maker101io I'm not a programmer, I'd almost use the ESP32 firmware version of Marlin which works with a 1604 Oled out of the box, or the ESP 32 GRBL. They have a nice web interface.
How many amp for the power supply?
And for the transistor in your circuit. Is it an AVB or ACV?
If you check on pcbway the name change between the 2 lists.
Hope to have a quick answer, its for a gift.
Thanks!
First 😊
😇
Merhabalar size sponsorluk ile ilgili mail atmıştım spam klasörünüze düşmüş olabilir kontrol edip geri dönüş yaparsanız sevinirim. İyi günler dilerim.
teklifiniz nedir acaba aynı ürünü sizin için üretebilirim
{mute:on}
So sad... 😢