I removed the exhaust and with touching the exhaust servo it threw all sorts of messages on my 1290, could not get them to go away so i put an ESE in place and the MTC came back on and i could change rider modes and shut the bike off using the grey switch instead of the kill switch, all this from detecting the wires were not in the exact place they should be, i ask myself why I saw your vid on removing the shock and tried myself but could not move it for some reason
Buy an OBE2 scanner and the attachment to connect to your bike, I have a video of one i bought,, Just go oin and reset all codes even if none are showing.. My rear suspenssion would not adjust electronically, over 2 years it has been like this,, Bought a reader, set codes and it works,, So go out and get one,, well worth it,,
I have the 1290 SD R. Purchased the same K8411 unit and a link cable from Rottweilier USA. ($16). The cable did not work. I could not read and clear codes. Mate, if your reading this, please please help us out with a link to the company you got the cable through
Hi Mate, sorry it took a while as I couldn't remember where I bought it till I found the receipt, Here is the web address obd2australia.com.au/product/ktm-6-pin-to-obd2-adapter-cable-diagnostic-motorcycles-can-kline/
Nice code reader, I have the 2020 KTM 1290 Super Adventure S and just got the preload adjustor error. My Innova code reader can connect, but doesn't seem to clear the codes. I'm trying to see if I can find a place that ships this code reader to Canada! What year is your 1290? Have you had to problem pop up again or has the preload adjuster problem gone away?
Hi Mate, the problem has gone away, 2 years of not working and fixed within 5 mins. When I checked for codes it said there were none, however I set it to clear all codes and saved codes, this did the trick. I have another code reader that does the same which is easily bought off ebay.. I will do a little video with it very soon. The other one is an ANCEL AD410 and it seems to work easily too. Hope this helps..
got 2020 1290 sas too ..same error code preload adj. I made mistake by sitting on bike while pressing load . should be done not sitting on bike . need to have dealer erase or get one of these readers
Well done. Love all the decals as well.
Great wee tools are they code readers. I bought one a few weeks ago for the Honda and it done the trick of putting the EML out
Can you add a link for the cable that you bought please
I actually cant find the link now,, but i did buy it on ebay from the US,,,
I removed the exhaust and with touching the exhaust servo it threw all sorts of messages on my 1290, could not get them to go away so i put an ESE in place and the MTC came back on and i could change rider modes and shut the bike off using the grey switch instead of the kill switch, all this from detecting the wires were not in the exact place they should be, i ask myself why
I saw your vid on removing the shock and tried myself but could not move it for some reason
Buy an OBE2 scanner and the attachment to connect to your bike, I have a video of one i bought,, Just go oin and reset all codes even if none are showing.. My rear suspenssion would not adjust electronically, over 2 years it has been like this,, Bought a reader, set codes and it works,, So go out and get one,, well worth it,,
I have the 1290 SD R. Purchased the same K8411 unit and a link cable from Rottweilier USA. ($16). The cable did not work. I could not read and clear codes.
Mate, if your reading this, please please help us out with a link to the company you got the cable through
Hi Mate, sorry it took a while as I couldn't remember where I bought it till I found the receipt, Here is the web address obd2australia.com.au/product/ktm-6-pin-to-obd2-adapter-cable-diagnostic-motorcycles-can-kline/
@@biker_dan Thanks a bunch Mate! I will give it a try and report back! Again, thank you for posting this video.
@@00000JESTER00000 anytime mate
Nice code reader, I have the 2020 KTM 1290 Super Adventure S and just got the preload adjustor error. My Innova code reader can connect, but doesn't seem to clear the codes. I'm trying to see if I can find a place that ships this code reader to Canada! What year is your 1290? Have you had to problem pop up again or has the preload adjuster problem gone away?
Hi Mate, the problem has gone away, 2 years of not working and fixed within 5 mins. When I checked for codes it said there were none, however I set it to clear all codes and saved codes, this did the trick. I have another code reader that does the same which is easily bought off ebay.. I will do a little video with it very soon. The other one is an ANCEL AD410 and it seems to work easily too. Hope this helps..
Here is the other code reader that works well. These can be acquired more easily.
th-cam.com/video/vtDs4j4cp5I/w-d-xo.htmlsi=nXvuzA2LXcFOwgBk
@@biker_dan Thanks man! I'll look into to it.
got 2020 1290 sas too ..same error code preload adj. I made mistake by sitting on bike while pressing load . should be done not sitting on bike . need to have dealer erase or get one of these readers