Motorcycle dash on your phone with OBD II reader

How to get your OBD II reader connected to your motorcycle and display additional information on your phone that your normal instruments don’t display.
This covers the connection to my KTM 690 SMC R.
BlueDriver: amzn.to/39mODgc
KTM adapter: amzn.to/3ddHO1A
Kawasaki Adapter: amzn.to/3cvjf11

[@nickn7939]

I have the blue driver on my mr2, It's funny I was always wondering if there was a way to get it working on a motorcycle, now it's confirmed, thanks for the vid!

[@hiddenskies8805]

This is exactly the video I needed for my KTM thank you!

[@drainmonkeys385]

Carpe iter makes the best tablet for this.. and they have a nice app called DMD2 for android. Allows you to pull off all the data your ecu will produce just like this but all readable from the app

[@drainmonkeys385]

Carpe iter makes the best tablet for this.. and they have a nice app called DMD2 for android. Allows you to pull off all the data your ecu will produce just like this but all readable from the app … the tablet is military grade,, you can hard wire to the motorcycle.. it’s the best… better than using the phone.. the phone has no vibration protection…

[@josuetop8069]

Hello, where i can find it?

[@corybass4713]

I have a 2020 KTM 790 Duke and tried about 4 OBD readers along with a series of different apps including the Blue-Driver with the exact cable adapter you have. I just found your video though. All the readers "connect" to the bike but none can seem to read the data- protocol. Any help or ideas would be amazing!

[@ektalon1]

Can you clear codes and “service needed” warnings?

[@loskie9389]

Wondering the same thing…dies it allow user to clear codes?

[@maxw576]

​@@loskie9389 a little late, but yes I've cleared and read codes with the blue driver.

[@themosaito]

Hi, Thanks for the video! I have a 2018 KTM 690 Enduro. It wasn't shown on your video, but do you get full functionality with the BlueDriver? I need to read the MAP Sensor and the Throttle Position Sensor, and I don't think these were covered in your vid. Do you know if these actually work?

[@mjaworley]

What adapter did you get to work on your harley? Is it a 4-pin or 6-pin connector?

[@davisjayy]

Would this work with a hayabusa? I found the correct connector to obd2

[@rohrfacu6228]

Hi there! Is this device compatible with all motorcycle brands?

[@primal5435]

Bluedriver comfirmed it works on a few bikes, but they dont promise it workning on all brands and models. However, it's likely that it will work on most bikes

[@rishi-9-00]

Can i keep the obd scanner connected to my bike all the time, also while riding ?

[@AverageCarGuy]

Yes. You can.

[@nd5977]

is this compatable with the truimph tiger 800 xrt

[@citygs]

does this drain the battery when not in use?

[@primal5435]

Pretty sure the connection turns off with the bike. So I would assume no.

[@BradleyGibbs]

Does bluedriver only work on bluedriver sensors or does it work on any ELM327 device?

[@AverageCarGuy]

The app only works with their own device. Is that what you mean?

[@Bunk_Moreland]

do ELM 327 firmware v1.5 work on new motorcycles (2020 and later)?

[@anthonypolitis4828]

not working to my gsxr k9

[@AmirHosseinFZ]

I wanna buy it, Did you try it?

[@texasaviator]

So what is the app name?

[@_JimS]

"Blue Driver OBD2 Scan Tool".....who knew...Lol!

[@HellaLegitFoo]

@@_JimS Whoa I’d have never guessed! 😂

[@_JimS]

@@HellaLegitFoo Right?

[@julianarodriguez3635]

How about for scooter

[@BradleyGibbs]

Only if the scooter has an ECU with obd2 output

[@markanderson1518]

Do you have the link for the adapter?

[@AverageCarGuy]

Yes. It’s in the video description.

[@ToHungDuong]

what's app name?
thanks

[@gensanmotorcyclesolutionsg3404]

What application is this

[@BradleyGibbs]

BlueDriver

[@raptor6958]

I accidentally did a burnout with tc on and now i have check engine do u think i can remove it with this device?

[@AverageCarGuy]

You can at least find out what it’s complaining about.

[@topmastermind]

Ay mandaw ka uyam