+Druaga1, you scrolled right past how to use the volume thing (15:54, for a few frames you'll see it). It says: Swipe your finger on the volume sensor strip to change the volume. To increase volume, move from the - towards the +. To decrease volume, move from the + towards the -. Tips: You can start swiping at any point on the strip. The duration of the swipe determines the amount of the change. A the end of this swipe, if you keep your finger on the strip, the volume control continues to change in the same direction. Tapping on the strop does not change the volume.
Disk Image files can be VERY strange. It's actually pretty consistent for a file to claim its file use is maxed out, because it can't identify "free space" in an image. An image is just a file, all the "free space" is consistent of hexadecimal information that tells the original software what it needs to know... So, while you have 217GB used of 288, the hexadecimal data remains to declare what fills the free space... In this case, if you were to have been successful, the hex data would have wiped the RAID clean by telling it to fill the excess with null data.
Macrium Reflect (free) is able to copy a whole disk to another one even if they have mismatching size. I did this when I switched from a 1TB hard drive to a SSD. (Of course I had to delete some files on the 1TB drive so the used space was less than the whole space of the target SSD)
1) shrink the partition on the drive you want to copy 2) Strip size it's not smallest file size! explaining the simplest: when you set it to 64 KB, only files bigger than 64 KB will get speed improvement, smaller files will be stored only on one drive so read speed for them will be read speed of that drive
The way I go about this usually is the following: Resize the source partitions to fit onto the target disk using GParted (Hiren's - Parted Magic), make sure all partitions are clustered together to the left (Don't leave GBs of space between OS an recovery, move recovery to sit beside OS again after shrinking OS) Then, I like using Macrium Reflect to clone the now-fitting disk. I've found that it can deal with cloning to a smaller disk as long as the combined size of partitions is smaller than the target, and as long as there isn't unallocated space in between them (It would try to keep the same amount of space).
I have no idea what is the idea behind this channel but it's really fun seeing you doing these "sorta kinda useless but usefull"™ stuff. Specially because you are not a super expert and I can relate A LOT when stuff doesn't go as planed and you have almost no idea what to do (but fight as well as you can to do it)
I became more happy after ur videos, because I actually realize, that I'm not only one who fuck up's everything, and eventually gave up at the end because failed...
If at 4,5 minutes Druaga1 says "This is gonna be easy" and there is still 40 minutes of video left, you know something will go wrong. Every reason to just sit and relax.. ;-)
Ahh Windows, we may complain about you, mock you, and even curse you for existing, but if there's two things that make you great it's your familiarity and your non-discriminating compatibility.
So i don't know much about strip sizes but from the last video i read the links and basically thats saying thats the smallest files size. Now it doesn't mean it cant store anything smaller, but for example if you tried to save a 2KB file it would take 128KB cause that is what you saved the strip size as. It would still show as 2KB on the os and move fast, but 126KB would be disregarded from the computer. That's why if an OS or anything is going on there you should make it small cause it should save a few gigs in the long run with files below the Strip Size.
HDD LLF: gets rid of everything on a drive (even the stuff Windows can't, but not Raid-definitions I believe). but you only need to quick-format, no real need to buy. It's so hardcore that afterwards you need to bring the drive back to life from within the Windows volume manager because it won't even show up as an unformated drive in explorer directly after using the tool. Very useful to give drives a "new start", especially after screwing around with OS X / linux.
Somewhere around 16:00 You mention the PDF skipping the capacitive volume. You didn't read closely enough. ;) (To increase volume, slide your finger from the minus to the plus. Do the opposite to decrease volume.)
Just cloned my HDD RAID0 too a SSD via a dongle, using Macrium Reflect. Win 8.1 NOTE. It wont boot through the external connection. But if you remove the two HDD and insert the SSD, works like a charm. Very simple and easy.
The RAID strip(e) size only effects how the data is spread between the disks - only really matters with mechanical drives if you're trying to optimize for random-access vs big raw files. The whole minimum file size thing is determined by the block size for whatever filesystem you're using - NTFS, FAT32, etc..
Why it shows the whole space is used? Because the program is creating an image of the WHOLE disk, and that includes whatever space is unused. So when you restore the image, it restores it fully to it's previous state. Aside from that, there might be used data in sectors that are off the disk space in your destination disk since it's smaller, which would lead to data corruption. And that's why it makes an image of the whole disk. If you only want to copy the data (no partitions / MBR), you might have better luck manually copying it instead of using disk images.
At ~13:50 you ignore the Chipset Drivers. But you should always install the chipset drivers. Also, you could easily look up your motherboard specification and find out if both ssd's were working on sata-2 or sata-3.
the stripe size is to do with the largest single file that can be written in one write cycle. for example, with a stripe size of 16kb, if a file is over 16kb it will write to stripes on both drives. so having a smaller stripe size is handy if you are dealing with small files(for access and writing). If the file you are dealing with is under 16kb, it will write to one stripe only and be very quick. if the file is massive, it will only read 16kb of the file per access cycle(therefore making the array work harder). So as a rule, the bigger the files being dealt with then the bigger the stripe should be. but that brings down access time when then reading smaller files. so for an OS, 32 or 64kb is my recommendation. not very technical i know, but neither am i.
9:00 "There's a login??" Well yeah.. When you started putting a password in at setup, I was like "WHy the fuck are you making a password??? Now it's gonna slow the startup process down because you have to log in!!!"
No. No it's not. It's (Recommended) Even says so. I've installed Windows 7 about 6.2 billion times. Never once have I put a password on it. Including the computer I am on at this very moment.
Once again, no it's not. It's only grayed out when he types the first letter in the password box, because then it's waiting for you to fill the rest out. Pause it at 6:23. I own a computer repair business, I know what the hell I"m talking about.
If you'd used the automatic mode in clone mode in Acronis, that would've resized everything for you. That PQService partition is the original Gateway factory image - I wouldn't bother with that then it would've fit.
The volume strip instructions were in the manual. You scrolled right past them. It acts kind of like a camcorder zoom. If you swipe to the left or right and then keep your finger on the strip, the volume will keep going in that direction.
I installed one of those driverless versions of Windows 7 Home Premium. It didn't have Internet Explorer on it. I had to download Firefox and the wireless LAN drivers from another computer to get it to work.
Hey Ian, on your touch volume control, you swipe your finger left and right to change the volume. (Saw it in the PDF you showed us in the video) Also, if you download Nvidia Geforce Experience, it finds and downloads the graphics driver automatically
Dang man, jut a while back I was wondering when you'd hit 40,000 subs, and now you've hit 50,000 subs. You're gonna be at 100,000+ subscribers in no time.
Just a tip: if you want to avoic that annoying 300 MB Recover Partition, do this right after selecting the language: SHITF + F10 Diskpart List Disk Select Disk "X" (could be 0, 1, etc) Create partition primary You could also create a partition with a specific size. For example, to create a primary partition with 430.3 GB, do _430.3 x 1024_, the result is the number you specify. So in my case the command would be: create partition primary size=440628
I've found whole disk backup restores to be more trouble than they're worth. For one thing, unless your hardware setup is almost EXACTLY the same, you'll probably run into driver issues. Windows has to be installed with certain basic drivers assuming certain things, and the hard disk controller for drive C is, unfortunately, one of those hard-coded things that will cause a BSOD if you, say, attach your Windows drive to a different SATA controller on the same motherboard even after you install the drivers for the other SATA controller. I've also heard that activating a RAID that wasn't there when Windows was first installed could be problematic. What I like to do instead is just do a fresh installation of Windows, and then copy over the user folders (Documents/Desktop/Downloads/etc) from the other drive. Works well in my case because I usually have installation EXEs for all the junk that was on my computer sitting in the Downloads folder anyway. Sure, it might take a few hours to get everything setup, but look how long restoring from a backup can take. Disk imaging really works best when you're either putting exactly the same image on several pieces of identical hardware on a regular basis, or if you're backing up the same system and planning to restore it to the same hard drive in case you mess something up. Otherwise, the time savings really aren't there, because doing the same operation several times under similar conditions without needing to fuss around is what makes it an improvement over more manual methods. If you're working with a few systems that have hardware changes... yeah, I wouldn't bother.
I would recommend HDClone, we use HD Clone 5 at my workplace to deploy images to SSD's the home version of HDClone 6 is super simple and does support cloning top smaller destinations.
have you tried redo restore? its a linux type backup and restore os but it works. im not sure if it has anything like compression but im about to use it to backup one of my computers but i will let you know if it does.
i have used it before and it is simple and works very well. also it is open source but it might be dead cause the website says copyright 2013 and the last download was in 2012 but it still works so yea. idk if it is still getting worked on?
on sourceforge their are still things going on in the discuessions for it so i dont think it is dead. but it is so simple it just works and that might be why it has not been updated in a few years. i guess
My MacBook Pro 2011 with one SATA III SSD can boot El Capitan in about 11 seconds. I want to put dual raid SSDs in it yet but I don't know if I want to replace the DVD drive.
97th fuck yeah. I can't believe i just checked ~6 minutes ago your channel and there was nothing new. So i decided to see the newest video from Explainig Computers and guess what? The suggestion of the next video was this one. Holy shit, thanks Obama.
Next video should be about PCI ATA controllers and setting up a raid on several garbage IDE HDDs on a modern motherboard. I'm thinking 4 drives isn't enough. If you're like me you have hundreds of low capacity IDE drives lying around being useless.
Does Druaga not know about the built-in Windows 7 Backup and Restore function in the control panel? It actually makes an image of only the space that you've used, and a recovery CD would have to be made... but it'd still probably be better then Acronis.
How about (since you've got disk images of the W7 original disk) shrinking the actual original disk? After that, you could copy it easily. Another disk utilities you could use is 'EaseUS partition master' (which has the option to create a live CD). I prefer using 'dd' or 'cat' since I do often work with Debian Linux.
after cleaning files off of your 320gb HDD, defragment it and shrink the partition using something like partedlive linux cd. then you should be able to clone it over (possibly straight from the same live cd with gparted).
I had gotten an issue where when I divided my hard disk into two partitions for dual boot goodness, I gave the second partition too much space; after a day when I went to shrink the second partition and put back some space to the first partition, it won't let me. I think it is because I am using an HDD and once there is a partition separating two other they cannot be joined together. Why I am saying this is because I think the reason why the disk was backed up as a full 288GB was because the space (the sectors) between the first partition and the hidden partition (the 10GB recovery) had to be compensated for during the actual backup procedure so that the system knows where the second partition (10GB recovery partition) was located. *this is just my take on the situation, I might be wrong*
Oh, if you have not messed with the original 320GB HDD you could try booting it back up (the 320GB HDD) and partition out the free space (make a partition out of all the available space on the HDD). Then when you do a back up and looking to restore, only restore by the partitions themselves and restore the 217GB (which would most likely be the remainder of partitioning out the free space) and the 10GB recovery partition. Hope to see this in your next video. and I really hope you reed these comments of mine :)
Now you can make a eGPU with a PCI 1x to 16x (like EXP GDC) with a laptop that has Intel HD Graphics 4000 or higher so you can use NVIDIA Optimus and display the graphics card without an external monitor, just in the laltop. I would really like to see that. Thanks for all your videos
Intel Matrix Storage RAID thingy doesn't do anything. It's known as FakeRAID as it doesn't use hardware acceleration or anything like a real hardware RAID. The main reason for it to exist is to allow Windows to boot off of SoftRAID. Unlike Mac OS X and GNU/Linux to name two options, Windows cannot boot off of it's own software RAID. So to boot, you need to have a 'fake' disk presented by the BIOS or HBA (in this case, the chipset's RAID ROM addon) so Windows thinks it's just booting off of a disk. There is no practical difference between motherboard-based fake RAID and 'normal' software RAID other than the BIOS seeing the Logical Volume (the RAID drive) instead of two drives, other than the windows boot support.
Broooo you can't put an image from a larger drive onto a smaller drive. Doesn't matter how much free space there is, the destination has to be equal or greater than the size of the original. It's because when you image the drive it copies the structure bit for bit, including free space, and it needs to stay intact in order to actually work on the new drive. Now some people have already said this but you can resize the original partition to say 200GB, so that it plus the MBR partition is less than 223GB, then in Acronis don't do a drive image but rather a partition image, selecting each partition individually.
"I would piss tremendously. Shit."
-Ian Anderson, 2016
Intel Weed i420 420X @ 4.20 ghz
u was watching memes then "OH SHIT A NEW DRUAGA1 VID SHIT"
I was lol
indeed
mee too
this is better than memes
"i dont want to just name it volume"
"lets name it 'weed'."
FYI:
S-ATA is (contrary to IDE/PATA) a point to point connection (so it is 1.5 Gbit/s, 3.0 Gbit/s or 6 Gbit/s connection per device).
Welcome to druaga1, where every episode technology seems to implode on itself
YES! ANOTHER VIDEO!
>Runs like a crazy because of how happy I am when a video of Druaga1 is uploaded
indeeeeed
yessss
drauga1 is easily my favorite youtuber xd
thats me XD also he's my fav youtuber 4 ever
+ItsKingasGaming I just stay up all night refreshing my TH-cam every few seconds 😆
+Druaga1, you scrolled right past how to use the volume thing (15:54, for a few frames you'll see it). It says:
Swipe your finger on the volume sensor strip to change the volume. To increase volume, move from the - towards the +. To decrease volume, move from the + towards the -.
Tips:
You can start swiping at any point on the strip.
The duration of the swipe determines the amount of the change.
A the end of this swipe, if you keep your finger on the strip, the volume control continues to change in the same direction.
Tapping on the strop does not change the volume.
Disk Image files can be VERY strange. It's actually pretty consistent for a file to claim its file use is maxed out, because it can't identify "free space" in an image. An image is just a file, all the "free space" is consistent of hexadecimal information that tells the original software what it needs to know... So, while you have 217GB used of 288, the hexadecimal data remains to declare what fills the free space... In this case, if you were to have been successful, the hex data would have wiped the RAID clean by telling it to fill the excess with null data.
Macrium Reflect (free) is able to copy a whole disk to another one even if they have mismatching size.
I did this when I switched from a 1TB hard drive to a SSD. (Of course I had to delete some files on the 1TB drive so the used space was less than the whole space of the target SSD)
1) shrink the partition on the drive you want to copy
2) Strip size it's not smallest file size! explaining the simplest: when you set it to 64 KB, only files bigger than 64 KB will get speed improvement, smaller files will be stored only on one drive so read speed for them will be read speed of that drive
still waiting on that gentoo on p4 video
I don't think Gentoo has a PPC port
+longlines Pentium 4 not powerpc!
Also it does have a ppc version.
Oh, it does? I didn't know about that. Also sorry for e interpreting p4 as G4.
+longlines C:
The way I go about this usually is the following:
Resize the source partitions to fit onto the target disk using GParted (Hiren's - Parted Magic), make sure all partitions are clustered together to the left (Don't leave GBs of space between OS an recovery, move recovery to sit beside OS again after shrinking OS)
Then, I like using Macrium Reflect to clone the now-fitting disk. I've found that it can deal with cloning to a smaller disk as long as the combined size of partitions is smaller than the target, and as long as there isn't unallocated space in between them (It would try to keep the same amount of space).
I have no idea what is the idea behind this channel but it's really fun seeing you doing these "sorta kinda useless but usefull"™ stuff. Specially because you are not a super expert and I can relate A LOT when stuff doesn't go as planed and you have almost no idea what to do (but fight as well as you can to do it)
13:15 "...part of the P-series..."
Siri picks up "Hey Siri" and activates.
Good job Apple. :|
Seppä ...to you. I use it every day. :)
FurTheLoveOfFurries But I use "Hey Siri..." Oh well, only happened once. Shouldn't happen again :)
FurTheLoveOfFurries I use it when I'm on the other side of the room. Otherwise I hold down the button. :)
***** FurTheLoveOfFurries I think we all need to calm down. :)
m8
I became more happy after ur videos, because I actually realize, that I'm not only one who fuck up's everything, and eventually gave up at the end because failed...
Your thumbnail looks like that hdd is getting grounded
Yes it does
- if you think about it, Freddy and Frezzy sound similar. Fun fact my old name was ImFreddyFazbear
@@FrezzyYT my irl name is Freddy
But it is similar yes
If at 4,5 minutes Druaga1 says "This is gonna be easy" and there is still 40 minutes of video left, you know something will go wrong. Every reason to just sit and relax.. ;-)
because of you I gained the courage of using 2 different brands between 4 drives that were all the same gigs, schterned...
Every time Druga1 uploads a new video:
*Rushes straight to TH-cam spamming the mouse to watch the video.*
Today on the news:
the police caught Druaga1 for installing windows 7 on a piece of weed
Ahh Windows, we may complain about you, mock you, and even curse you for existing, but if there's two things that make you great it's your familiarity and your non-discriminating compatibility.
I like to have these on in the background while I'm troubleshooting my phone.
I oddly love your videos. theyre like the old aesthetic of TH-cam lol
34:43 WTF? LMAO How is that even possible? Apple 1 - Microsoft 0
11 hours ago
I was watching an episode of Computer Chronicles but now I gotta watch this
Duuude, u are the best! each time a new video comes out i am always happy, cuz u know howto be funny man!
So i don't know much about strip sizes but from the last video i read the links and basically thats saying thats the smallest files size. Now it doesn't mean it cant store anything smaller, but for example if you tried to save a 2KB file it would take 128KB cause that is what you saved the strip size as. It would still show as 2KB on the os and move fast, but 126KB would be disregarded from the computer. That's why if an OS or anything is going on there you should make it small cause it should save a few gigs in the long run with files below the Strip Size.
I shouldve waited before replying this lol. 31:45 made me feel stupid
+Hggd Ghjk I can't it goes against my no deleting comments rule :P
HDD LLF: gets rid of everything on a drive (even the stuff Windows can't, but not Raid-definitions I believe). but you only need to quick-format, no real need to buy. It's so hardcore that afterwards you need to bring the drive back to life from within the Windows volume manager because it won't even show up as an unformated drive in explorer directly after using the tool.
Very useful to give drives a "new start", especially after screwing around with OS X / linux.
Somewhere around 16:00 You mention the PDF skipping the capacitive volume. You didn't read closely enough. ;) (To increase volume, slide your finger from the minus to the plus. Do the opposite to decrease volume.)
Just cloned my HDD RAID0 too a SSD via a dongle, using Macrium Reflect. Win 8.1 NOTE. It wont boot through the external connection. But if you remove the two HDD and insert the SSD, works like a charm. Very simple and easy.
The RAID strip(e) size only effects how the data is spread between the disks - only really matters with mechanical drives if you're trying to optimize for random-access vs big raw files. The whole minimum file size thing is determined by the block size for whatever filesystem you're using - NTFS, FAT32, etc..
You know the operating system wars are strong when the bootloaders survive even after a NTFS reformat and a RAID creation 34:40
You made me want to re watch short cuircuit with that humming lol
4:41 - humming the Short Circuit 2 music.. Druaga in my brains yet again.
Why it shows the whole space is used? Because the program is creating an image of the WHOLE disk, and that includes whatever space is unused. So when you restore the image, it restores it fully to it's previous state. Aside from that, there might be used data in sectors that are off the disk space in your destination disk since it's smaller, which would lead to data corruption. And that's why it makes an image of the whole disk. If you only want to copy the data (no partitions / MBR), you might have better luck manually copying it instead of using disk images.
I finished watching a few old vids of Duraga1 and then I come back to his channel and BOOM NEW VID AA
Back with windows 7, the dots could not even finish on the boot screen on my ssd.
At ~13:50 you ignore the Chipset Drivers. But you should always install the chipset drivers. Also, you could easily look up your motherboard specification and find out if both ssd's were working on sata-2 or sata-3.
the stripe size is to do with the largest single file that can be written in one write cycle. for example, with a stripe size of 16kb, if a file is over 16kb it will write to stripes on both drives. so having a smaller stripe size is handy if you are dealing with small files(for access and writing). If the file you are dealing with is under 16kb, it will write to one stripe only and be very quick. if the file is massive, it will only read 16kb of the file per access cycle(therefore making the array work harder). So as a rule, the bigger the files being dealt with then the bigger the stripe should be. but that brings down access time when then reading smaller files. so for an OS, 32 or 64kb is my recommendation. not very technical i know, but neither am i.
9:00 "There's a login??"
Well yeah.. When you started putting a password in at setup, I was like "WHy the fuck are you making a password??? Now it's gonna slow the startup process down because you have to log in!!!"
its REQUIRED
No. No it's not. It's (Recommended) Even says so. I've installed Windows 7 about 6.2 billion times. Never once have I put a password on it. Including the computer I am on at this very moment.
+P2000Camaro oops I thought the hint was the password :\
+P2000Camaro the next button is grayed out in the install
Once again, no it's not. It's only grayed out when he types the first letter in the password box, because then it's waiting for you to fill the rest out. Pause it at 6:23. I own a computer repair business, I know what the hell I"m talking about.
I had to put Windows 7 Pro on my workstation because only the pro versions can recognise more than 4 cpu's
I'm using that exact same version of Windows 7 right now in a virtual machine with Windows 10 as the host OS
Password is weed. Of course.
Wouldn't be surprised if that is he's TH-cam password
But what its his mail weedweed@Weed.net ?
YESSSSS. GOOD JOB DRUAGA LOVE YOUR VIDS SOOOO MUCH. *runs into door while trying to get to computer*
If you'd used the automatic mode in clone mode in Acronis, that would've resized everything for you. That PQService partition is the original Gateway factory image - I wouldn't bother with that then it would've fit.
The volume strip instructions were in the manual. You scrolled right past them. It acts kind of like a camcorder zoom. If you swipe to the left or right and then keep your finger on the strip, the volume will keep going in that direction.
4:34 - Great rendition of the Short Circuit 2 intro credits
Druaga1 is like electroBOOM of computers... still love 'em both. :)
congrats on 50k!
Love your videos dude.
I installed one of those driverless versions of Windows 7 Home Premium. It didn't have Internet Explorer on it. I had to download Firefox and the wireless LAN drivers from another computer to get it to work.
can't believe that you made vids 10 years ago keep it up :D
try putting the windows 7 install on a flash drive and see how has it goes. it will fly on installing windows on almost any system.
I started watching you when you had about 30,000 and now you have about 52,000 subscribers. Wow big growth
When the pimp's in the C drive, drop it like it's hot, drop it like it's hot.
Hey Ian, on your touch volume control, you swipe your finger left and right to change the volume. (Saw it in the PDF you showed us in the video)
Also, if you download Nvidia Geforce Experience, it finds and downloads the graphics driver automatically
Dang man, jut a while back I was wondering when you'd hit 40,000 subs, and now you've hit 50,000 subs. You're gonna be at 100,000+ subscribers in no time.
Fun fact: If you hit 1 on your keyboard while this video is playing, it'll take you to 4:20.
Just a tip: if you want to avoic that annoying 300 MB Recover Partition, do this right after selecting the language:
SHITF + F10
Diskpart
List Disk
Select Disk "X" (could be 0, 1, etc)
Create partition primary
You could also create a partition with a specific size. For example, to create a primary partition with 430.3 GB, do _430.3 x 1024_, the result is the number you specify. So in my case the command would be:
create partition primary size=440628
Druaga when you get to the product key screen you should smash the keyboard for a ton of random characters and thennn cut screen to afterwards. =P
Today was a good day.
Druaga uploaded.
I've found whole disk backup restores to be more trouble than they're worth. For one thing, unless your hardware setup is almost EXACTLY the same, you'll probably run into driver issues. Windows has to be installed with certain basic drivers assuming certain things, and the hard disk controller for drive C is, unfortunately, one of those hard-coded things that will cause a BSOD if you, say, attach your Windows drive to a different SATA controller on the same motherboard even after you install the drivers for the other SATA controller. I've also heard that activating a RAID that wasn't there when Windows was first installed could be problematic.
What I like to do instead is just do a fresh installation of Windows, and then copy over the user folders (Documents/Desktop/Downloads/etc) from the other drive. Works well in my case because I usually have installation EXEs for all the junk that was on my computer sitting in the Downloads folder anyway. Sure, it might take a few hours to get everything setup, but look how long restoring from a backup can take.
Disk imaging really works best when you're either putting exactly the same image on several pieces of identical hardware on a regular basis, or if you're backing up the same system and planning to restore it to the same hard drive in case you mess something up. Otherwise, the time savings really aren't there, because doing the same operation several times under similar conditions without needing to fuss around is what makes it an improvement over more manual methods. If you're working with a few systems that have hardware changes... yeah, I wouldn't bother.
I would recommend HDClone, we use HD Clone 5 at my workplace to deploy images to SSD's the home version of HDClone 6 is super simple and does support cloning top smaller destinations.
still waiting on that iPod video
i use easeus todo backup for my stuff like backing up and restoring images. acronis is just not what it should be.
have you tried redo restore? its a linux type backup and restore os but it works. im not sure if it has anything like compression but im about to use it to backup one of my computers but i will let you know if it does.
i have used it before and it is simple and works very well. also it is open source but it might be dead cause the website says copyright 2013 and the last download was in 2012 but it still works so yea. idk if it is still getting worked on?
on sourceforge their are still things going on in the discuessions for it so i dont think it is dead. but it is so simple it just works and that might be why it has not been updated in a few years. i guess
well lets see if he uses it in his next vid on this if he even does another vid on this. Think he is going to?
I think Gateway's site sucks because of Acer who owns them now, Acer's site has the same layout.
My MacBook Pro 2011 with one SATA III SSD can boot El Capitan in about 11 seconds. I want to put dual raid SSDs in it yet but I don't know if I want to replace the DVD drive.
97th fuck yeah.
I can't believe i just checked ~6 minutes ago your channel and there was nothing new.
So i decided to see the newest video from Explainig Computers and guess what?
The suggestion of the next video was this one.
Holy shit, thanks Obama.
My hardware RAID 0 died on me the other day. Had to reinstall OS and took the RAID down back to 2 disks. Too risky with non-identical drives.
50,000 subs? Man you deserve like a million
YEAH!! Back at it with another video!! YEEEAAAHHH!!!
Wow, in 48 hours you have gained more than 2k subscribers... thats a good pace.
34:28 LEGO Island's Elevator tune - shortened
u are the most crazy man in youtube I ve ever seen!!!
Go on!
do a windows NT 4.0 video
thanks for being an inspiration bro. love your vids.
I think it was using the whole disk because of the recovery partition may be on the end of the disk?
Necessary non-jinx music interlude.
Congrats on 50k!!
HP deletes their products' drivers after 10 years, which makes it really frustrating
Next video should be about PCI ATA controllers and setting up a raid on several garbage IDE HDDs on a modern motherboard. I'm thinking 4 drives isn't enough. If you're like me you have hundreds of low capacity IDE drives lying around being useless.
It says "Weed" in your boot menu LOL!, That's funny dude
RAID ON THE RAIDDAR AT 2OCLOCK
Shrink the actual Vista partition on the 320GB drive while it's booted. You could then clone the partition onto the RAID SSDs. :D
Does Druaga not know about the built-in Windows 7 Backup and Restore function in the control panel? It actually makes an image of only the space that you've used, and a recovery CD would have to be made... but it'd still probably be better then Acronis.
Congrats on 50k subs! :)
Akkbuku uses RAID 0 for his main laptop? I think your friend is insane.
Well I just copied my Win7 onto an Raid 0 and it worked fine with 650mb/s read, but no difference what so ever in booting time...
How about (since you've got disk images of the W7 original disk) shrinking the actual original disk? After that, you could copy it easily.
Another disk utilities you could use is 'EaseUS partition master' (which has the option to create a live CD). I prefer using 'dd' or 'cat' since I do often work with Debian Linux.
You need to resize the partition on the original drive to smaller than the destination! Then you can clone it straight over without an image.
after cleaning files off of your 320gb HDD, defragment it and shrink the partition using something like partedlive linux cd. then you should be able to clone it over (possibly straight from the same live cd with gparted).
>Loves installing SSDs in everything
>Still uses CDs or DVDs to install OS's
2:01 it's weird how both the drives are 111.7 GB but the raid is 223.5. it should be 223.4.
I had gotten an issue where when I divided my hard disk into two partitions for dual boot goodness, I gave the second partition too much space; after a day when I went to shrink the second partition and put back some space to the first partition, it won't let me. I think it is because I am using an HDD and once there is a partition separating two other they cannot be joined together. Why I am saying this is because I think the reason why the disk was backed up as a full 288GB was because the space (the sectors) between the first partition and the hidden partition (the 10GB recovery) had to be compensated for during the actual backup procedure so that the system knows where the second partition (10GB recovery partition) was located.
*this is just my take on the situation, I might be wrong*
Oh, if you have not messed with the original 320GB HDD you could try booting it back up (the 320GB HDD) and partition out the free space (make a partition out of all the available space on the HDD). Then when you do a back up and looking to restore, only restore by the partitions themselves and restore the 217GB (which would most likely be the remainder of partitioning out the free space) and the 10GB recovery partition.
Hope to see this in your next video.
and
I really hope you reed these comments of mine :)
Are you Going to make a gaming chanle i really liked it when you played doom XD
Now you can make a eGPU with a PCI 1x to 16x (like EXP GDC) with a laptop that has Intel HD Graphics 4000 or higher so you can use NVIDIA Optimus and display the graphics card without an external monitor, just in the laltop. I would really like to see that. Thanks for all your videos
Intel Matrix Storage RAID thingy doesn't do anything. It's known as FakeRAID as it doesn't use hardware acceleration or anything like a real hardware RAID. The main reason for it to exist is to allow Windows to boot off of SoftRAID. Unlike Mac OS X and GNU/Linux to name two options, Windows cannot boot off of it's own software RAID. So to boot, you need to have a 'fake' disk presented by the BIOS or HBA (in this case, the chipset's RAID ROM addon) so Windows thinks it's just booting off of a disk. There is no practical difference between motherboard-based fake RAID and 'normal' software RAID other than the BIOS seeing the Logical Volume (the RAID drive) instead of two drives, other than the windows boot support.
I want to see that 320 gb drive booting off the notebook please.
It's the windows 98 on a raid on an old pentium machine
Broooo you can't put an image from a larger drive onto a smaller drive. Doesn't matter how much free space there is, the destination has to be equal or greater than the size of the original. It's because when you image the drive it copies the structure bit for bit, including free space, and it needs to stay intact in order to actually work on the new drive.
Now some people have already said this but you can resize the original partition to say 200GB, so that it plus the MBR partition is less than 223GB, then in Acronis don't do a drive image but rather a partition image, selecting each partition individually.
why is it so dark? were not gonna in stall this we gonna in stall dis! whats dis?! lol