Hello, thank you so much for your videos. I was wondering if you could help me. I recently changed the solenoids, sealing sleeves, and the bridge seal, now the only thing that works is the reverse. I have INPA software and the 4f81 code is coming up. I hear a rattling sound form the transmission sometimes it will catch for a second to go forward, and it will sometimes pull forward in manual mode 2nd and 6th just a little, enough to kinda pull back into the garage but it even stopped doing that.
What ended up being the issue? Wondering if you bought cheaper selonoid replacement kit, instead of OEM? I'm about to service my valve body also, changing sleeves, bridge seal, and possibly solenoids also. So I'm curious if you got it sorted, and what the problem was pls
@@kat-ko8qe I bought OEM but the transmission works perfect now. I had use the wrong transmission fluid or actually they sent me the wrong transmission fluid, the Febi Bilstein transsion fluid number had be payed attention to, I actually caught the discrepancy a video of a guy the goes to different ppl house to change their fluid. I also went cheap on the oil pan because pressure is important so I bit the bullet an bought OEM, servicing the valvebody was easier than I thought so everything is cool now. I saved myself about 3000-50000 g's so Im happy.
Nice video. Can you recommend the use of any aftermarket fluids for the ZF6HP26? I am a mechanic in Invercargill and want to change the fluid, mechantronc sealing sleave and pan/filter on my E65 BMW? Thanks, Matt.
ПОМЕНЯЛ МАСЛО В АКПП 6HP19 ---КОРОБКА ВСТАЁТ В АВАРИЙНЫЙ РЕЖИМ , ОШИБКА 009988 ПО ВТОРОЙ И ТРЕТЕЙ СКОРОСТИ .АДОПТАЦИЯ НЕ ПОМОГАЕТ .ПОЛОМКА ИМЕННО ПОСЛЕ ЗАМЕНЫ МАСЛА ПОДСКАЖИТЕ КАК РЕШИТЬ ПРОБЛЕММУ ?
Hi, Do you rebuild the mechatronic of a BMW 750i prod yr 06/2010? Can I buy a used mechatronic from another compatible BMW 750 and replace it? Can you reprogram the mechatronic to fit the car's VIN? Thanks
I believe what's recommended is to just keep the blak electrical control from original, pair it to new valve body. Otherwise it needs to be coded to car
Hi . My vehicle shows the selenoid fault 3-4. The overdrive fails at speeds of 60/80 km / h. Sometimes it does not apply the recoil until a good time of heating the vehicle. Which selonoid should I change? What other problems do you think my transmission has?
It actually looks really simple to rebuild it
what is the cost for the rebuild.
info on the 1000hp parts upgrade please
Great video
About how much does this job cost?
Thanks
Interesting video, did'nt learn much
Hello, thank you so much for your videos. I was wondering if you could help me. I recently changed the solenoids, sealing sleeves, and the bridge seal, now the only thing that works is the reverse. I have INPA software and the 4f81 code is coming up. I hear a rattling sound form the transmission sometimes it will catch for a second to go forward, and it will sometimes pull forward in manual mode 2nd and 6th just a little, enough to kinda pull back into the garage but it even stopped doing that.
What ended up being the issue? Wondering if you bought cheaper selonoid replacement kit, instead of OEM?
I'm about to service my valve body also, changing sleeves, bridge seal, and possibly solenoids also. So I'm curious if you got it sorted, and what the problem was pls
@@kat-ko8qe I bought OEM but the transmission works perfect now. I had use the wrong transmission fluid or actually they sent me the wrong transmission fluid, the Febi Bilstein transsion fluid number had be payed attention to, I actually caught the discrepancy a video of a guy the goes to different ppl house to change their fluid. I also went cheap on the oil pan because pressure is important so I bit the bullet an bought OEM, servicing the valvebody was easier than I thought so everything is cool now. I saved myself about 3000-50000 g's so Im happy.
Nice video. Can you recommend the use of any aftermarket fluids for the ZF6HP26? I am a mechanic in Invercargill and want to change the fluid, mechantronc sealing sleave and pan/filter on my E65 BMW? Thanks, Matt.
transam500hp It's really tough if you don't want to pay dealer prices! Nulon Fully Synthetic is suitable for use in most ZF6's.
Hello, can i ask roughly how many hours labour for this rebuild?
Cheers Brandon
How much do you charge?
where do you buy the high performance clutch plates from?
The frictions in this unit are better than any aftermarket friction available. Just stick with oem frictions, they hold fine
bmw used carbon clutches don't remove carbon clutches to put after market steel clutches
Exedy clutches
I'm greatful for your teaching, but I wont to see how zf 151 gearbox rebuild thank you , you are teacher
how much it cost to rebuild one?
how did you remove the flange with the flex disc?
You have to remove them because the gearbox needs to be pried away from the engine like 40 - 50 mm in order to be lowered away from the car.
ПОМЕНЯЛ МАСЛО В АКПП 6HP19 ---КОРОБКА ВСТАЁТ В АВАРИЙНЫЙ РЕЖИМ , ОШИБКА 009988 ПО ВТОРОЙ И ТРЕТЕЙ СКОРОСТИ .АДОПТАЦИЯ НЕ ПОМОГАЕТ .ПОЛОМКА ИМЕННО ПОСЛЕ ЗАМЕНЫ МАСЛА
ПОДСКАЖИТЕ КАК РЕШИТЬ ПРОБЛЕММУ ?
I wish to know how much it costs me for this services?????
I I damaged the valve "HV-D Retaining brake D / 4. Holding Valve D1" Anyone know which ZF code number, where I could buy a new one?
Bloody hell give those blokes some air conditioning he's suffering there !
What do you guys charge for a 6hp26 rebuild? Can you give an approximate.
Hello. I have a problem in shifting three sometimes give a shock. What could be the cause? force feels less.
Did you find a solution?
My guess is it was a selonoid or mechatronic sleeves. What was the issue?
Hi,
Do you rebuild the mechatronic of a BMW 750i prod yr 06/2010? Can I buy a used mechatronic from another compatible BMW 750 and replace it? Can you reprogram the mechatronic to fit the car's VIN? Thanks
I believe what's recommended is to just keep the blak electrical control from original, pair it to new valve body. Otherwise it needs to be coded to car
wow those clutch packs magically appear back inside. Not much of a "Rebuild" video. Just another tear down video pretty much.
He did not rebuild anything from what I see
jesus, the constant in and out of music is anoying
Hi .
My vehicle shows the selenoid fault 3-4.
The overdrive fails at speeds of 60/80 km / h.
Sometimes it does not apply the recoil until a good time of heating the vehicle.
Which selonoid should I change?
What other problems do you think my transmission has?
do them all at the same time
Change the one for 3rd gear.
What is a sonax zip kit?
It was just the seals no need for a rebuild like this
Gadamit I thought this would be a diy....
Wlm
it is to expensive
How much do you charge?