this took me down a deep rabbit hole of researching the mechanical properties of PETG - just so i can design some snap fit joint for a simple box i made. that brochure is amazing.
Just to note: These are mostly applicable to plastic injection you need to consider a lot more cases when building for 3D prints because of layer building hierarchy.
Hello. I have an electric charcoal lighter from the 1980s that I'm trying to take apart. I was able to remove the 2 metal screws with no issues. However, the plastic cover won't come off. I was able to slip through the seam with a flat screwdriver, but gently prying it won't pop the lid open. And I don't want to damage it with excessive force. I'm thinking that theres some snap fit joints involved, but I'm not 100% sure. Is there a tool you could recommend for releasing the snap joints regardless if they're permanent or not? Without damaging or breaking anything of course. Thanks
@@fakesupremebag Hey there. After numerous attempts at gently prying and lifting, the lid just wouldn't come off. So I figured out there was an area inside the handle where there were some stubborn snaps. Luckily I I could slip a flathead screwdriver through the narrow opening where the power cord is attached. Since the snaps were located in an obscure area, i decided to apply force in that area with the screwdriver to break the snaps. Once i did that, it popped right open. I just wish I figured it out sooner and not caused hairline cracks on the lid due to fiddling around that whole time.
Entrar "snap-fit joints design guide bayer" en google da por ejemplo lo siguiente enlace: studylib.net/doc/18095695/snap-fit-joints-for-plastics---a-design-guide-by-bayer
this took me down a deep rabbit hole of researching the mechanical properties of PETG - just so i can design some snap fit joint for a simple box i made.
that brochure is amazing.
Back to work! 😜 Thank you for sharing!😁
Just to note:
These are mostly applicable to plastic injection you need to consider a lot more cases when building for 3D prints because of layer building hierarchy.
@@dr.n3246 Search for plastic injection and compare with 3d print. You will notice plastic injection is more sturdy.
Thank you!
Explaining how snap fit joints work with animation might be clearer.
What they made off ?
How is you looking at a document a TH-cam video?
do you have a link to the pdf? thanks for sharing this video
if you look up "plastic snap fit design fasteners.pdf" the first result is an MIT page that has the pdf!
fab.cba.mit.edu/classes/S62.12/people/vernelle.noel/Plastic_Snap_fit_design.pdf
@@ImKittyCow Much obliged, exactly what I was scrolling for!
can you help me sending a pdf about " snap joint connections of frp structures" ?
Hello. I have an electric charcoal lighter from the 1980s that I'm trying to take apart. I was able to remove the 2 metal screws with no issues. However, the plastic cover won't come off. I was able to slip through the seam with a flat screwdriver, but gently prying it won't pop the lid open. And I don't want to damage it with excessive force. I'm thinking that theres some snap fit joints involved, but I'm not 100% sure. Is there a tool you could recommend for releasing the snap joints regardless if they're permanent or not? Without damaging or breaking anything of course. Thanks
In the same spot as you my friend let me know if you figured it out
@@fakesupremebag Hey there. After numerous attempts at gently prying and lifting, the lid just wouldn't come off. So I figured out there was an area inside the handle where there were some stubborn snaps. Luckily I I could slip a flathead screwdriver through the narrow opening where the power cord is attached. Since the snaps were located in an obscure area, i decided to apply force in that area with the screwdriver to break the snaps. Once i did that, it popped right open. I just wish I figured it out sooner and not caused hairline cracks on the lid due to fiddling around that whole time.
👍
Hola, como se llama el libro? de donde lo puedo bajar o comprar..? gracias
Entrar "snap-fit joints design guide bayer" en google da por ejemplo lo siguiente enlace:
studylib.net/doc/18095695/snap-fit-joints-for-plastics---a-design-guide-by-bayer
@@benjaminfacouchere2395 gracias
can I get this PPT notes please
i found it tyvm
@@sam90o48 hey where did you find it?
fab.cba.mit.edu/classes/S62.12/people/vernelle.noel/Plastic_Snap_fit_design.pdf
This would have benefited from some enthusiasm.