How To: POL Disc Brake Conversion on a 1965 Chevy C-10 - Part 1 Spindle and Ball Joints
ฝัง
- เผยแพร่เมื่อ 15 ธ.ค. 2022
- Brake Kit www.performanceonline.com/196...
Ball Joint Press amzn.to/3FE0Tbz
Pickle Forks amzn.to/3FWigFN
Grease Gun amzn.to/3FAq0vM
I'm putting new disc brakes on the 65 C-10 and I went with the POL kit. In part 1 I install the spindles, ball joints and rotors.
Disclaimer: The Amazon link(s) above contain affiliate links but this video is not sponsored. If you click the link(s) and make a purchase I will earn a small commission at no additional cost to you. That commission will likely be used to buy more things to use/review in future videos. Thanks!
Find me at:
/ midnightroadgarage
/ midnightroadgarage
T-shirts:
midnight-road-garage.creator-...
Music from ncs.io
Send me stuff :)
MRG
PO Box 518
Amissville VA 20106
#projectcar #chevrolet #midnightroadgarage #chevytrucks #lsswap - ยานยนต์และพาหนะ
Bro needs some help packing those bearings, but still a good video stance looks great
Great video, my 65 has the drums riveted to the hub. Old old!
Thanks!
I’ve heard so many different things about slotted drilled rotors but the majority of people say they should be pointing towards the front of the vehicle- but I noticed yours are pointing towards the rear-
I don't actually recall (and I'm not up for watching the video tonight to jog my memory lol) but I imagine they were labeled right and left. It currently just drives in and out of the shop though so I'll take a look the next time I'm down there.
That's some great stance right there Jim 👍 My lines are within a couple inches of the header coming down from the master to the frame, has not been a problem even in the summer. Hope you all had a great Christmas, and a great New Year coming soon !
Happy New Year buddy! Yeah a couple inches would be great but these would be almost touching. Maybe 1/4 inch tops. I made it work though. Video coming sometime next week I hope. Got to bleed them this weekend.
@@MidnightRoadGarage- Was going to comment but then forgot about the cut and re-welded springs... NEVER seen that before ! See you next year 👍