ฝัง
- เผยแพร่เมื่อ 15 มิ.ย. 2024
- Price: 284€ with code: ⭐ NNNDEV3KE ⭐
🛒Product: www.geekbuying.com/go/8HlOymc5 (afilliate)
FW update 1.1.0.12 (or mainsail config?) fixed the massive first layer problems I had!
Mainsail gui (and moonraker in the background) enabled some nice convenience features on the Ender3v3ke - just like I have them on my K1!
- Orca Wifi printing (upload and print from within slicer)
- OctoEverywhere integration (remote monitoring, access and notify!)
Find my initial review of this printer here: • Creality Ender-3 V3ke ...
and also check out the K1 review: • Creality K1 - very fas...
and the followup: • See how I Improved my ...
and especially check out the FlashForge Adventurer 5MPro (my best printer!): • FlashForge M5Pro - bet...
I stand for HONEST reviews and opinions! If you wanna support this idea please check my PATREON: bit.ly/2ESMtIO
INSTRUCTIONS:__________
✅ You can use this guide for the fw update (but it's just going into options and perform an ota update): github.com/CrealityOfficial/E...
✅ and now we continue with rooting and installing mainsail:
github.com/CrealityOfficial/E...
- download the files ( mainsail.sh and .tar ) in the root directory of the Usb stick via your computer, (IMPORTANT: make sure you download those files correctly (open their page and then hit "download RAW", not rightclick and "save target"!
- now plug the USB stick into the Ender3 and
- access ENDER3v3ke now with Putty (SSH connection)
- Copy the files ( mainsail.sh and mainsail.tar) to enders user directory ( /usr/data):
cp /tmp/udisk/sda1/mainsail/* /usr/data/
- Install mainsail, moonraker and nginx by running this script:
/usr/data/mainsail.sh install
- Access mainsail UI: IP with 4409 port eg, 192.168.1.1:4409
3.) 💡 optional - ⭐ Octoeverywhere addon for notification and remote access:
- create an OctoEverywhere account (free)
- activate OctoEverywhere service on your printer (in ssh shell)
cd /usr/data/
git clone github.com/QuinnDamerell/Octo...
/usr/data/OctoPrint-OctoEverywhere/install.sh
follow the prompts, at the end you need to visit octoeverywhere.com/code and enter the code that you see in the SSH shell to bind your printer to the account.
Then I was even able to activate Mail and TELEGRAM notifications on printer events!
If you get this error (when trying to run the installer): "-sh: install.sh: not found"
the please go into the OctoPrint-OctoEverywhere dir and there use:
sh install.sh (instead of just "install.sh") - that worked for me!
one more tip: 💡
============
if OTA update doesnt find a new FW (if you look too early upon arrival of new FW) it can be neccessary to use the USB stick update method:
1. download newest Creality FW from their site: www.crealitycloud.com/softwar...
2. copy this .img file to your USB Stick
3. insert USB Stick and follow menu options (USB FW Update)
DO YOU WANT TO SEE MORE???
►TOP Videos: goo.gl/MHfr1D
►Mountain DIVES: goo.gl/FfXPHa
►Product REVIEWS: goo.gl/mZkwHr
●▬▬▬EQUIPMENT▬▬▬▬▬▬▬▬▬▬▬▬▬●
my Hangar: goo.gl/QNzck
Filmed with: Sony A7c, Samsung Galaxy S10, edited with Premiere Pro
╔═╦╗╔╦╗╔═╦═╦╦╦╦╗╔═╗
║╚╣║║║╚╣╚╣╔╣╔╣║╚╣═╣ → goo.gl/szFJv
╠╗║╚╝║║╠╗║╚╣║║║║║═╣ (best way to support me!)
╚═╩══╩═╩═╩═╩╝╚╩═╩═╝
(¯`·.¸¸.·´¯`·.¸¸.-RCSchim-.¸¸.·´¯`·.¸¸.·´¯)
► Discord Server: / discord
► RCSchim@gmx.at
► / rcschim
► / rcschim
► / rcschim
► / rcschim
► rcschim.BLOGspot.com
●▬▬▬VIDEO INDEX▬▬▬▬▬▬▬▬▬▬▬▬●
00:00 Intro
01:31 How to? (QUICK)
02:34 Firmware Update and root
03:16 install MAINSAIL
05:37 OctoEverywhere
06:41 bed mesh fixed!
09:09 Updated conclusion
●▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬●
#RCSchim #ender3v3ke #klipper - บันเทิง
Price: 284€ with code: ⭐ NNNDEV3KE ⭐
🛒Product: www.geekbuying.com/go/8HlOymc5 (afilliate)
FW update 1.1.0.12 (or mainsail config?) fixed the massive first layer problems I had!
Mainsail gui (and moonraker in the background) enabled some nice convenience features on the Ender3v3ke - just like I have them on my K1!
- Orca Wifi printing (upload and print from within slicer)
- OctoEverywhere integration (remote monitoring, access and notify!)
FIND more info in the infobox of course!
💡tipp for OCOTOEVERYWHERE:
if you get this error (when trying to run the installer):
"-sh: install.sh: not found"
the please go into the OctoPrint-OctoEverywhere dir and there use:
sh install.sh
(instead of just "install.sh") - that worked for me!
Best two videos I've seen on the KE so far and I've seen some good ones. So great job! Really looking forward to implementing all of this.
So glad I found this channel. Thanks for the video!!!
I cannot even begin with how everything in this video is priceless. I've spent hours trying to fix bad prints that started to happen after a few prints and could never get good results. With this video, I got very good prints with the OrcaSlicer. And the OctoEverywhere is sooooo handy! Thank you so much! Not all heroes wear capes!
PS: Do you think you will ever make a video about manually levelling the bed? I think it is my next "Final Boss" of this printer 😅 I've seen so many ways to do it, but they don't seem right...
Thanks for such a nice comment! makes my day to know, sharing my findings helped someone else.
I don't think you need to manually level the bed (unless it's really far off?)
I found a really nice and easy way to level the bed of the K1 printer I also have. there it is a coreXY - and it's bed is mounted on 3 points on the z axis. and on these mounts you simply print little washers that have the missing height - so all 3 corners are at the same height. reduced my difference from 1.5mm (from lowest to highest) to "only" around 0.5mm difference. couldnt get it better.
but funny: even with 1.5mm difference the prints were not bad (there the bed mesh was used correctly).
greets, Mario
@@RcschimI wonder if you could possibly do some testing as to what fixed the first layer quality? The firmware upgrade from 1.09 to 1.12 didn't fix my issues.
Awesome! Thanks for the update, Mario! 😃
Stay safe there with your family! 🖖😊
Thanks so much for this guide! Looking forward to trying it 😊
Thank you for the tutorial. The install was a breeze. Subbed to your channel!
glad to hear it worked for you!
Thank you this helped me immensely
Thank you for the update info, i just have mine for 2 weeks, but printing in 15 minutes was a joke, I took some time to fine tune becuse my first bechy was a mess afther 20 layers and i had to abort it.
My best improvements on the KE was checking all the screws on the upper assembly, sling bed and under the base, 90% of them where loose.. for example, the complete linear rail was loose including the printerhead bracket. (all supplied alankey's have been used😂)
Cleaning, greacing and line out the ballbearings under the sling bed, operating very smooth now!
upgrading the nozzle to the copper/galvenized k1 version from the 4pc set. (big +)
decreacing the speed and acceleration with +/- 15%, less noise.
used some 1mm kork between the base and motor for sound isolation, adjusted the pully hight and the belt was over tight, corected that
mounted the filament holder in the enclosure that i made becuse the 1kg on top only creates more vibration in the upper assembly
replaced the feet with demper pucks normaly used for loudspeakers.
now the prints are looking really smooth and im verry content with it!
No first layer problems in the enclosure and i can lower my temperture a bit as well,.
wow, a lot of tips there - I need to check a few of those suggestions myself. on my delivery most screws were quite tight. I also thought about a spoolholder on the wall - the weight considerations sound good. Nozzle: I'll also swap mine out for a hardend steel 0.6 probbably. seldom need high res prints (and if, I'd trust the flashforge more ;)
@@Rcschim A few people like myself found the screws on the hotend heatsink were loose - def check those.
Thank you for the tips! I've had a few very good looking prints out of the box, however, then something weird happened and it started printing the first layer like CRAP!!!! I washed trays, unclogged, cleaned, changed nozzles (the ones included in the package, I believe its the K1 4 piece set) - nothing worked.
I disassembled the heat bed.. turns out i have 4 differently sized spacers, normally they should be 2 by 2 the same.
Soo I tried to correct for the wrong spacers with some washers, and it somewhat works, but i've contacted creality and they are sending over some new spacers + a nozzle fan, as that one is quite noisy sometimes.
I am still having first layer issues and before the new spacers arriver, I am planning to disassemble the whole fucking thing, and make sure its assembled all correctly and everything tightened and greased as it shoould be.
TL.DR.
The printer can yield AMAZING RESULTS (compared with a friends Bambu A1 - barely any differnence) - but god, the headaches it can create until you get it all dialed in and set up.
Ok. Some important guidance. If Mainsail connection fails then edit moonraker. Conf inside printer data/config folder and add you lan ip. My was not in list
thanks for the video… I missed the fw update until I watched this… already upgraded and root, so just installed mainsail.
Looking forward to install a new nozzle, maybe a DIY case for abs printing (if possible at all), and a external camera with spaghetti detection…
Thank you so much for this ...♥
I used WinSCP to copy the files and make the executable. I ran both the Fluidd and Mainsail scripts. Working excellent.
To noobs, like me, it isn't clear what it means when it says "save to same level (mainsail) directory of the u disk directory." Its saying ti create a folder named "mainsail" in the main folder for the u disk. Download the two raw files into the mainsail fokder. Maybe im the only dumb one who couldn't figure that out but if not hopefully this helps the next guy.
You're for sure not the only guy having issues with this (from reading the comments I saw a few here that got errors because they didnt follow the instructions exactly with where to put the files).
That's the problem with computers: they need us to be very exact - or they don't understand what we want from them :)
hope it worked out for you in the end?
Im having trouble here. The .tar file is a zip. Ive downloaded mainsail.sh put that into a Mainsail folder I created, then I put the zip in the same folder and nothing. I am confused@@Rcschim
I put in the co=p /tmp code and it sways no such file or directory@@Rcschim
Hard to follow instruction exact when the instructions skip over those specifics. Not sure why it doesnt say to create folders or why you dont show it in the video. Its like making a video on how to make a cake. You explained how to wash the bowl, then now that you have your cake batter mixed lets heat the oven. There is a pretty crucial part missing.@@Rcschim
@@Darkhell87 thanks for the feedback and sorry ;) sometimes those (for me as an IT guy) easy steps are left out because I thought it's obvious. let me know if you need more instructions.
I also noticed that the update and dependencies are not 100% correct here ;)
but for me all works except some warnings - so at the moment I'll leave it as it is. This is out a few days - so early alpha ;) I'm quite sure that we will get a better version in a few days or weeks - but atm all works.
Already tweaking my other creality printer - the K1. Spent the whole afternoon - but now it's better ;)
100% getting better prints with klipper! I have the k1 max and the Ender 3 KE and they both have klipper and I’m using orca slicer now. I had an issue with the camera displaying I just had to edit the config file with the correct endpoint for it. (Both mobile app and fluidd)
Would you mind sharing how you did this? I have the creality camera, but I can't get it to show up in mainsail. I'm using the same IP as orcaslicer has for the printer itself, so I dont know if Im picking the wrong format or what? If I could peak at your work, maybe I could figure it out. Thanks friend.
Thanks For The Video, Helped me out a lot. I am completely new to all this.
I noticed the update manger on mine say Klipper and Moonraker are dectached, Do i need to start over with a fresh install?
Excellent video. With your help, the quality of my prints has increased dramatically. OctoPrint is also amazing. You helped me save weeks of work.
I was also wondering, I get some errors from time to time and wonder if the specifications of the KE are sufficient to run Mainsail, etc. Will you suggest installing Mainsail OS on a Raspberry Pi and connecting it to the KE, as the Pi (in my case, Pi 3B) has better specs? I tried to do that but got stuck at the connection between the printer and the Raspberry Pi (cannot find how to tell Mainsail OS to locate my printer on the network).
Thanks for the nice comment
I also thought that ke is a bit weak for mainsail ...
I think if you want to use pi as controller, you need to connect the printer via USB. That's what I did with the older ender 3s1pro, and a laptop.
@@Rcschim thanks a lot for the input. I will give USB a try tomorrow (it makes sense!) and will leave the update here for others. I have few crashes, especially when connecting remotely with octoeverywhere. In local it is kind of stable.
@Rcschim btw, did a bit of research on what was causing the crashes, and it appears that the OctoEverywhere plugin is consuming a lot of resources, especially when the camera is on.
So I uninstalled everything not necessary to run Mainsail, and since then, it's been smooth sailing. I use the Creality Cloud (crap) app as a backup to check the camera (still uses resources but way less) and connect to a local PC using Splashtop to check Mainsail if necessary.
Just leaving that info here to help others.
I still have a first layer problem with FW update 1.1.0.12. I correct the problem manually because the auto Z offset moves +/-0.1 mm depending on your mood. While searching on the internet, I came across your video. I will try to install mainsail.
Did mainsail solved first layer issues for you?
@@robertopaolillo4648 I haven't tried it yet, I have another project to finish. I doubt it will solve the problem. But I'll try it when I have time for it.
Thank you so much, I just rooted my KE, installed mainsail and can now print from OrcaSlicer directly, which is fantastic. I'm fairly new to 3D printers and used Creality Print until today. Some features are missing since I made the upgrade. I don't see the webcam (Nebula) on the mainsail dashboard, even though it's setup in settings and I see the preview there. Another thing that I miss is the estimated time remaining on the Nebula display screen (shows 0h00m while printing). In mailsail it also shows always 0/0 layers remaining. There seems a lot to learn and how to tackle situations like these. Any chance on another video for getting things right with the rooted KE with OrcaSlicer? Thanks again 🙂
Currently I don’t plan on diving deeper into this rabbit hole ;). I don’t have the nebula pad or this cam. I guess if Creality offers new firmware for this printer, it could support their hardware without us having to tinker with Linux shells ;)
In the meantime I just use a hacked Yi home camera which works perfectly for this.
@@Rcschimby any chance so you have a video of using the yi rooted camera and how to use it in the ender ke? I also have one and I would like to try 😊
Hi from Belarus! I have firmware v. 1.1.0.13. Can I use this instruction?)
Great video, very informative! I was able to get Mainsail and Fluidd both installed as well as the Octoeverywhere plugin working.
I am running into an odd issue after installs Octoeverywhere though, I am getting a Moonraker warning showing in Fluidd:
Unable to initialize System Update Provider for distribution: buildroot
Also, if I go to the Software Updates tab it shows moonraker as Invalid with a Recover button. Going to try to do that after my current print finishes but just curious if you had any similar issues?
Thanks!
Yes, I think the moon raker version is old and outdated, cannot be updated. Maybe they had to remove some parts to fit it on this smaller board on the ke?
I would leave it as it is as long as it works…
Regarding this issue can you keep us posted? Thanks for the helpful tutorial!@@Rcschim
Hello! I've been running into an issue with the KE using Mainsail/Fluidd and orcaslicer, the printing works great but when I look in mainsail/Fluidd ui, it lists the current layer and the total layers as 0/0. Has anyone else run into this issue?
I think the layers are labeled incorrect on my installation as well ;)
I've just ordered this printer and it's being delivered today. I've tried to learn everything I can about 3D printing, as I've never done it before. Is there anything else I should know?
You will make mistakes, your printer will, that’s ok, printing stuff is so rewarding. Every time I take something of the plate it’s really nice to see something materialized from my mind to matter ;)
Best case is that you created the 3d part yourself in something like onshape. Greets, Mario
Please make a video about how to install guppy
Does this new operating system allow the bed calibration before printing like Creality Print does?
Sure, but you can also add this as custom gcode in your slicer in the options of the printer.
Würdest du deine Einstellungen für den Druck von PLA und TPU teilen? Danke für das super Video und Grüsse
Ich hab die normalen Einstellungen genommen, welche die aktuelle Version von Orca für den Drucker hinterlegt hat...
I just bought a KE the other day and it's been extremely fast. I printed an almost flawless benchy (the one that comes with it) in 16 minutes. I did, however, update to the latest firmware before I printed anything. With that said, I hate that I have to use Creality Print and not Cura or PrusaSlicer. The question I have is, am I risking anything by installing Mainsail or Fluidd? Will this completely replace the current functionality or Creality OS? Since it's printing very well, I don't want to do something which I cannot reverse should it have an adverse effect on my print speed/quality.
You can for sure mess things up if you go wrong path somewhere, but in the worst case you can re flash the orig firmware. Maybe get the emergency image ready before you install mainsail/fluidd….
I recently purchased an Ender3 v3-ke and am trying to determine settings for it in Cura as I do not see it as an option in the list of Creality Ender series printers. Any suggestions?
didn't use Cura now for a while... are you on the latest version? In orca at least, they've added ender 3v3ke with the last version.
in the worst case, install orca and copy the settings over to cura (if you prefer the latter)
I followed your tutorial, and manythings seems not to be working correctly liké moonraker outdated, autolevel before print, Time estimation. So i uninstalled.
And used a K1 script that worked a lot better on my printer to install moonraker and mainsail.
Thanks for the info. The k1 script with interactive menu? This works here on the v3? Do you have a link of the version you used? Thanks!
By any command she’ll what do you mean? This is probably going to sound dumb but would command shell work?😅. Or do I need to have Linux on my pc or something. I’m very new to 3d printing hense the dumb questions ahaha
That was actually wrong from me to call it command shell. You need a tool like putty to connect to the Linux shell.
It says no such files on usb stick i don't get it
Hello there! im having lots of trouble with the bed leveling, looks like its not using the bed mesh or something like that because i even tried adjusting the bed screws to level the bed manually as far as i can with a sheet of paper and days of patience but still some corners too tall and some just perfect so i will try to upgrade the firmware with this video tomorrow because im really desperate right now! I will update if i can fix the issue
You DID apply the g-code to use the mesh in your slicer,right?
Hello. I can't get Orcaslicer to replace Creality Print on Orca's Device tab. I'm not sure why. Does Mainsail have a different IP address (in the WIFI button on the prepare tab)? If so, where do I get it?
Or do I need Octoprint with a host to do this?
5:18 from your video, for reference.
Hi, where did you get your printers in Adresse from? Look it up directly on the printers touchscreen somewhere in the settings, network I guess…. Then add :4409 to the ip if you use mainsail or :4408 if you use fluidd. And enter this in both lines of the orca wifi setup as shown in my video.
Hope it works!
@@Rcschim You know... I did do that and it didn't replace Creality print the first time... somehow going back and doing all again after rebooting fixed the issue! 🤘
You sir are awesome Danke!😁
-By chance do you know how to get the Creality camera to work in Mainsail? I've tried the IP address for the printer, read some forums, but none seem to address that camera.-
EDIT- I rooted with Fluidd instead. Camera shows up by default.
Sadly I never had the bed layer results you did on MS. Scraping like hell. I had that bed within .01+/- range for each 'zone' on tests, by replacing nylon washers with springs. Maybe the z-offset was to blame. Couldn't get MS to z-offset right, maybe the original settings on KE-interface overwriting?
Another bonus with Fluidd (so far) is I have no problem monitoring prints or stopping them on the creality mobile app.
Hey can you explain how did you fix the bed leveling with mainsail i have the same issue
Thank you
I'm still not 100% sure, but I think it was the latest firmware that fixed the bedlevel. But I did both steps at the same time (fw update + mainsail install).
@@Rcschim Thank you , yesterday I finally managed to balance the hotbed, 0.2 layer on all the hotbed was almost perfect, the corner are little bit higher but can be work with.
What acceleration numbers do you put in the orca slicer?
Looks like I used the stock settings from Orca lately (but printing TPU the material was the speed limiting factor).
Stock accell: x/y= 8000 Z=500
Weird, I had the same issue with the first layer and updating firmware to 1.1.0.12 didn't fix anything. Auto bed leveling doesn't seem to work at all. I had to manually level the bed with washers and lower z offset to get it to print the first layer.
same issue gere
Did you put the starting g-code to actually use the bed mesh in your slicer software?
@@questionsfrog1918 I didn't... I installed Klipper and it seems to help with first layer. I also discovered that when printing at max speed, extruder was skipping at some specific places when printing the first layer and it caused the filament to not stick. Maybe this was the issue all along and I just didn't figure it out right away.
Anyway, using Klipper and limiting printing speed to 200 mm/s seems to have fixed my problems and I get stable prints most of the time.
When trying the copy, I got a "No Such file or directory" error....
2 places to plug in USB.. top or bottom?
hi, double check the usb stick - for the copy command below, you need to throw the 2 files you downloaded into a subfolder "mainsail" (also check the spelling, including case)
cp /tmp/udisk/sda1/mainsail/* /usr/data/
shouldnt matter which USB port on the ender, I think I took the lower
Thank you so much.
@@Rcschim
Thanks for the informative video & know how Mario, my bed leveling is out and my firmware is v1.1.0.12 already - do i need to do the mainsail to fix it?
im new to 3d printing so having difficulty in understanding whats needed or how to do it - could you perhaps assist
with "my bed is out" do you mean it's not good, not producing a good first layer?
I'm still not sure if the FW 1...12 did the trick for me, or if it was Mainsail (but I think it was mainsail - since a few others already said, just installing the 1..12 fw didnt help them...
@@Rcschim first layer is not good & the test done shows uneven figures diagonally....bottom left sections is the worst
ok, then give the mainsail/Klipper installation a try. it's really not that hard (if you follow the important tips like how to download the files correctly!). good luck and good first layer ;)
@@Rcschim thanks Mario, appreciate your feedback and willingness to help - will do this for sure
@@Rudirudz7 Did you installed Mainsail? Are the first layer now fixed for you?
are you able to use Octoprint when you root the printer? I've just ordered my printer and I really want to keep using octoprint
Yes, sure! Works nice. The only limitation I found so far is the free plan only allows a given amount of notifications per day...
@@Rcschim thats a shame but better than noting, Have you seen if its possiable to fully install Octoprint? and not octoeverywhere?
@@chrishurley5933 nope, I didn't try Octoprint yet...
@@Rcschim oh I would love a vid on that! as thats what I really want mainsail and Octoprint with all the amazing plugins that Octoprint has!
Sorry, but is it official firmware? I'm afraid that push notifications from the app will stop working.
it's official, yes. Not sure atm if the crealty app push notifications will work if you would take the 2nd step and install also the free Klipper / mainsail. But here you can install octoeverywhere and get way cooler notification (including mailnotify with images of your print).
you don't really need putty anymore on windows. windows has had built in ssh support since windows 10
Do you need a specific type of usb? I used the one that came with the printer but thats not working (no such files exist) error
nope, it should work with the usb stick you have! I guess you placed the files in the wrong directory. if you follow the guide, it's important to have the files in the dir "mainsail" (mind small / large letters)
double check this...
@@Rcschim In the hiddin files? Because otherwise my usb is empty
@@Kcb_creations please check the video again. you need to copy the files on the usb stick!
@@Rcschim I did but then it tells me what i said earlier just the two files to the root of the usb there's nothing ele on the stick but the two files
@@Kcb_creations if you pay attention to the guide you see that you are supposed to move those 2 files not to the root but in the folder mainsail.
Only then the Linux copy command will be correct. If they are in the root folder, you need to shorten the copy command…
Just watch it again and it should be clear I guess….
What was the sheet you printed to test the bed level?
Yes, just to confirm it prints correct. If you are too close to the bed, it is getting waves, to far and it will have holes or worse. If it's like a sheet of paper, then it's fine.
@@Rcschim but what is the STL used to check it?
@@AndriiGumennyi no stl needed really, just add a Box in your slicer and scale the Dimensions: height like your layerheight (0.2mm normally), and 220x220mm x and y...
@@Rcschim thx! I thought some special pattern should be used :)) short summary: I checked your video a couple days before printer came and started my work from your settings, as for me - everything works fine now :) printing the side spool mount now
@@Rcschim Can this be done with Orca Slicer? I can't find the option if so. I did one with Creality Print anyways.
can you get Prusa or Cura to connect wirelessly?
since Orca is based on both, I'd guess so - but since 1-2 month I only use Orca Slicer...
I am new to 3d printing. My printer came with FW 1.1.0.12 installed. Did not fix first layer issue. How did you manually adjust? Thanks
If you have bad first layer during prints even tho the auto bed level procedure was running, then it really comes down to installing the Klipper/Mainsail software that I showed in my vid (I did both at the same time so I didn't know what solved the problems - but a few comments here already suggested that the new firmware alone didnt really help). Go ahead, watch my installation steps closely and install the mainsail software, it's not that hard (even if you don't know much about Linux ssh shells ;) A few guys already reported me here that it worked for them. good luck and enjoy a better print then hopefully!
Thanks for your quick reply. Is the Installation similar on a Macintosh?
@@jackshaffer4044 yes, I'm quite sure that "putty" also exists on Mac. And the other stuff is just using browser...
@@Rcschim what is "putty"?
@jackshaffer4044 just one of the many programs to connect to a Linux console (over ssh, the protocol). Maybe you don't even need it and can use a stock tool on your Mac...
Do you have the gcode and STL for the first layer print you used? Looking to duplicate, make sure my KE similarly works out the kinks.
Okay, so I made my own cuboid with Creality Print, 0.2 layer height, 100/sec first layer speed. I did three before updating the firmware, one a smooth plate, one on the default KE bed (both PEI). After I updated the firmware I have done one more test. Unfortunately, I didn't see the results you did. None of my prints were as bad the ones you showed, just some thinning on the right side of the bed. Bed level calibration, shows the right side rear is lowest and right front is highest, so clearly the algorithim can't compensate for the difference.
Do you believe there is a difference in the way that Mainsail/Klipper treats the gcode or the config after rooting? I'll be doing those soon, so hope to see some difference. Maybe not a bad idea to manually level with spacers at this point.
I wonder if OrcaSlicer just treats the gcode differently enough to configure the bed level correctly. Did you use Orca Slicer when doing your pre-upgrade prints?
hey, thanks for all the feedback!
From a few comments I got I believe that mainsail did correct the bed leveling (just the firmware 1.0.12 alone didnt help as it seems). Bad research / testing on my side - should have done these steps individually. But I already spent so much time on it, was about to give this up...
Yes, I used orca for most prints (only one time tried creality to see if this would be better - which it wasnt :)
Orca is definitly the way to go for me. at first it seemed a bit different, but it has so many great features!
@@Rcschim Hello im running into the same bed level problems even with the 1.0.12 firmware (bad level in one of the corners and it doesnt seem to compensate with auto level) so i will try to follow the video and update if that fixes it!
@@oli3705 yes, good luck with the klipper (should be easy) and please let me know if it fixes your bedlevel! I'm quite sure it will, but would be good for others to know...
@@Rcschim just finished with the install, now i have mainsail working and also orcaslicer (i have to learn about the slicer but looks very full of features) i will hit the autobed level in the printer then print a test file to see if that solved the bed problems right now!
is there a way to add an Ai camera?
I didn't find this out. I think the ke is too limited to run a cam...
Hi, I've got this problem. After installing mainsail I tried to install octoeverywhre but I got error 28 (no space left on device). I installed mainsail after factory reset(the one in settings) so I guess memory shoudn't be a problem. Do you know how to fix it?
same problem! someone pls xD
check your GCode files - not sure if they are deleted on factory reset.
Also I didn't check how much space I have at all. Will do and report here.
check thru the usr/data subfolders and see if there are big files.
you can use "ls" for showing content of directory,
and "rm filename.ext" to delete stuff there (or rather over the webgui).
Did you maybe enable a cam and have timelaps files?
Stock I think I had 6GB space, with mainsail it's less for sure....
if you use the ssh shell you can ask df - h
this shows disk consumption - and here's mine:
(in the last line you see I've used 776mb and still have 4.8GB free space) - this is with mainsail + octoeverywhere
root@F005-3134 / [#] df -h
Filesystem Size Used Available Use% Mounted on
/dev/root 109.9M 109.9M 0 100% /rom
devtmpfs 98.4M 0 98.4M 0% /dev
tmpfs 98.5M 1.0M 97.5M 1% /dev/shm
tmpfs 98.5M 548.0K 98.0M 1% /tmp
tmpfs 98.5M 204.0K 98.3M 0% /run
/dev/mmcblk0p9 290.5M 2.6M 272.9M 1% /overlay
overlayfs:/overlay 290.5M 2.6M 272.9M 1% /
/dev/mmcblk0p10 5.9G 776.1M 4.8G 14% /usr/data
@@alanlim4139 see my comment below, use "df - h" in the shell to see your disk usage...
once you are connected via ssh you can see that /tmp is limited to 100M, you would need to remount this partition with a bigger size to let this script run. I used this command but failed further down the install, try it, maybe it will work for you:
mount -o remount,size=1G /tmp/
This command will remount the /tmp partition with 1 gigabyte instead of 100 megabytes by default. This should give plenty of space for the temporary install files. Once the script is done (successfully or not) you can revert back the size by
mount -o remount,size=100M /tmp/
but I think after a reboot it will default to 100M anyway.
I have a similar probem but my ender ke does not even have "bash" shell so I can't even run the script legitimately. Sigh.
I get in to creality print without :4409 but with it I get ERR_CONNECTION_REFUSED (The webpage can not be reached) What to do?
Hi, what do you mean with creality print? the slicer that comes with the ender? Or rather the default webpage that you reach on your printer?
If you just get the default page (the one without :4409) - then you probbably didnt install the mainsail gui in the linux shell.
if you elaborate more on what problem you have, I might be able to assist ;)
Ah sorry, it's the default webpage. It says 192.168.50.109/#/home. I tried my best to follow the giude, what might I have done wrong?@@Rcschim
I did it all over again but changed "/usr/data/mainsail.sh unstall" to uninstall in the end. Now it works :) Did you have a video how you got the nice level plastic sheet. Was there some calibration?
@@Rcschim
(can't stat No such file or directory) I have tried many discs, many ways of copying and many PCs, but it always says...
I’ve found the solution: instead of “install.sh” You have to type “sh install.sh”
@@Rcschim solved. I copied the files over another ssh. another console found the files on the flash drive fine. then everything worked perfectly according to the instructions. thank you sir :)
@@Petr.L What did you use cause i'm having the same issue
I downloaded the files to my usb but nothing shows up when i plug it into my ke. Also, one of the files was a rar file. is that correct? Maybe you could do a video on how to install mainsail. This video skips a step. You activate the root and then jump to a program on your pc and i have no idea what it is
Sorry, my vid was not clear enough in that steps…. After you plug in the usb stick with the files, you need to open an ssh shell (get putty on your pc, easy little tool). Find out the ip adress of your printer (should be found in the printers settings). Then connect to ssh shell via putty and login with root / Creality2023 and enter the 2 commands (first copy files, 2nd start the script).
Hope this helps. If you need help about putty, check my last video (ender3 review)
@@Rcschim Yea it's a bit rough. Now that I have putty. I put the files onto the usb and plugged it into the printer. Next I opened putty and logged into the printer. However when I try to use the copy code I get this error "cp: can't stat '/tmp/udisk/sda1/mainsail/*': No such file or directory". Any idea how to fix this?
sorry, your comment was in spam...
if the copy (cp) command gives you this error, I think either your USB stick isn't recognized at all, or your mainsail dir on the usb stick is misspelled (or just small and large letters mixed?)
Thanks heaps for the walk through. Unfortunately I am stuck on this step too, with the same error. I have deleted all other files on the USB (one provided with the printer) ensured the file is spelled the same with lower case letters and all in the root directory of the drive...any ideas? @@Rcschim
@@tommisgraham have you downloaded the 2 files corectly (not the HTMLs like I did first, but really the Download RAW files? maybe use a notepad to view the content of these files.
on the linux shell: try to use the "ls" command (which shows content of the folder) to confirm you really copied the files in the right place (in the same path as the CP command).
you might have to watch a basic linux ssh tutorial to understand you you browse folders...
I couldn't get in with the password and then I realized the C was capitalized and that worked for me so make sure you capitalize your C when you're putting in the password.
I cannot get the Octoeverywhere to install. I tried manually typing in the ./sh install.sh but that didn't work for me. Am i entering that correctly or is that wrong?
Well mainsail is just a black screen. nothing comes up. tried to uninstall Mainsail and reinstall, reboot nothing helped
did you use the correct URL to access mainsail? yourPrinterIP:4409 ?
did the mainsail install script show any errors? dont know what could go wrong there (possibly a lot) - but for me it just worked (as you see in the video)
@@Rcschim Well thats the thing i get a balck screen when going to 192.168.xx.xxx:4409 but if i use orcaslicer it can print perfect over wifi. its crazy. i just cant see anything in mainsail.
i used the link you provided in the video. and downloaded the files RAW.
@@Rcschim After some more troubleshooting, I was able to fix the issue. I tried accessing the website using Microsoft Edge, and it worked perfectly. This led me to investigate the settings in Firefox, where I discovered that the website was using an insecure SSL certificate. As a result, Firefox was blocking the site. To resolve this, I simply allowed the website to run. And now, everything is working smoothly.
AHHH - first : your new comment was in spam...
2nd: would have never thought about the browser ;)
glad you found it out!
@@Rcschim hope it can help someone else :D
@RCSchim Hi, would it be possible to share your test sheet in .stl format?
I'm new to v3 KE and have no idea about 3D modeling.
I'd like to know what it's like on mine, I sometimes have problems.
Thanks in advance
Hi, it's really easy: in your slicer software:
add "primitive" cube
scale it so it has 22x22 cm and only 0.25mm height. (sometimes you need to uncheck a checkmark in the scale option to be able to scale the 3 axis in different dimensions...)
you can then also make smaller flat sheets and lay them on your virtual printerbed where the first layer didnt look good in the first run...
let me know if you still need the STL later and I can upload one...
Perfect, thank you very much, I'll try it out!
I'm just wondering if I should increase the Z axis, I'm only printing PETG at the moment and I have the impression that my thread is too crushed, your test will be perfect.
I'm using 1.1.0.9 rooted with Destinal's method, but I'm wondering whether upgrading to 1.1.0.12 might be useful.
Thanks again for your help, I'll be sure to come back to you if I have any problems 👍
Hallo kannst du das Video auch auf Deutsch machen. MfG
Hi, ich überlegs mir :) Optimal wäre es, wenn TH-cam mehrere Tonspuren unterstützen würde. Wennst sonst Fragen zum Inhalt hast, kann ich Dir ja hier helfen probieren.
Das wäre echt super
Ich habe den ke seit einer Woche und möchte aus dem Drucker alles raus holen. Leider ist mein Englisch sehr schlecht und deutsche Videos mit detaillierten Informationen noch nicht viel verfügbar.Ich habe vor 5 Jahren mit dem ender3 angefangen den
ich heute noch habe.Auch Klipper ist für mich noch Neuland. MfG
Es ist nicht viel, aber hier mal mein Skript in de:
Das FW-Update 1.1.0.12 (oder die Großsegelkonfiguration?) hat die massiven Probleme der ersten Ebene behoben, die ich hatte!
Die Großsegel-GUI (und der Moonraker im Hintergrund) ermöglichten einige nette Komfortfunktionen auf dem Ender3v3ke - genau wie ich sie auf meinem K1 habe!
- Orca Wifi-Druck (Hochladen und Drucken aus dem Slicer heraus)
- OctoEverywhere-Integration (Fernüberwachung, Zugriff und Benachrichtigung!)
Ich stehe für EHRLICHE Bewertungen und Meinungen! Wenn Sie diese Idee unterstützen möchten, schauen Sie sich bitte mein PATREON an: bit.ly/2ESMtIO
ANWEISUNGEN:__________
✅ Sie können diese Anleitung für das FW-Update verwenden (aber es geht nur darum, in die Optionen zu gehen und ein OTA-Update durchzuführen): github.com/CrealityOfficial/Ender-3_V3_KE_Klipper/releases/tag/V1.1.0.12
✅ und jetzt geht es weiter mit dem Rooten und Installieren des Großsegels:
github.com/CrealityOfficial/Ender-3_V3_KE_Annex
- Laden Sie die Dateien (mainsail.sh und .tar) im Stammverzeichnis des USB-Sticks über Ihren Computer herunter (WICHTIG: Stellen Sie sicher, dass Sie diese Dateien korrekt herunterladen (öffnen Sie ihre Seite und klicken Sie dann auf „RAW herunterladen“, nicht auf Rechtsklick und „). Ziel speichern“!
- Stecken Sie nun den USB-Stick in den Ender3 und
- Zugriff auf ENDER3v3ke jetzt mit Putty (SSH-Verbindung)
- Kopieren Sie die Dateien ( mainsail.sh und mainsail.tar) in das Ender-Benutzerverzeichnis ( /usr/data):
cp /tmp/udisk/sda1/mainsail/* /usr/data/
- Installieren Sie Großsegel, Moonraker und Nginx, indem Sie dieses Skript ausführen:
/usr/data/mainsail.sh installieren
- Zugriff auf die Benutzeroberfläche des Großsegels: IP mit 4409-Port, z. B. 192.168.1.1:4409
3.) 💡 optional - ⭐ Octoeverywhere Addon für Benachrichtigung und Fernzugriff:
- Erstellen Sie ein OctoEverywhere-Konto (kostenlos)
- Aktivieren Sie den OctoEverywhere-Dienst auf Ihrem Drucker (in der SSH-Shell).
cd /usr/data/
Git-Klon github.com/QuinnDamerell/OctoPrint-OctoEverywhere
/usr/data/OctoPrint-OctoEverywhere/install.sh
Befolgen Sie die Anweisungen. Am Ende müssen Sie octoeverywhere.com/code besuchen und den Code eingeben, den Sie in der SSH-Shell sehen, um Ihren Drucker an das Konto zu binden.
Dann konnte ich sogar Mail- und TELEGRAM-Benachrichtigungen bei Druckerereignissen aktivieren!
Noch ein Tipp: 💡
============
Wenn das OTA-Update keine neue FW findet (wenn Sie zu früh nach der Ankunft der neuen FW suchen), kann es notwendig sein, die USB-Stick-Update-Methode zu verwenden:
1. Laden Sie die neueste Creality FW von der Website herunter: www.crealitycloud.com/software-firmware/firmware/ender-series?keyword=&system=0&subType=6503bcccd8745df10ae96737&hardware=0
2. Kopieren Sie diese .img-Datei auf Ihren USB-Stick
3. USB-Stick einstecken und Menüoptionen befolgen (USB FW Update)
hey!!! Ich wusste nicht, daß es bei TH-cam schon geht! Man kann anscheinend tatsächlich einen weiteren Audio-Track bei einem Video hochladen (der Carmaniac, falls Du den kennst, hat's grad eindrucksvoll bewiesen mit seinem Macan E video in mehreren Sprachen).
Werd ich mir also ansehen, und in Zukunft zumindest ein Voiceover meiner Videos in DE anbieten.
can u send me ur profile in orca slicer? my hotend touch all my prints. thank u very much!!!
I used the default Ender profile from latest orca…
@@Rcschim youn dnt no change nothing??
Much much too complicated my feiend
Sounds worse than it is!
@@Rcschim your video is brilliant but unfortunately way past my knowledge base .I just keep me printers stock .I don't buy a machine with the idea that I have to change things .But that's just me .
@@charlesrestivo870 sure, normally I'm also not the guy to modd a lot (or overclock my PC...) but in the case of those printers - it's an easy way to get way more convenience...
@@Rcschim if I've been happy with totally stock ender3v2 since they came out I'd be very happy lol have a great day thank u for replys
Truthfully I don't need cameras I don't want wifi convience I use a blink camera to watch the status .As far as UI if the machine can update itself fine Otherwise I run them stock I'm never in a rush my two orginal ender3v2 still run great Keep them clean I'm good .
Дякую! Все працює! THX!
Hi! The OrcaSlicer issues a warning:
"Dependency: Moonraker
The current Moonraker version does not support all features of Mainsail. Update Moonraker to at least v0.8.0-38"
How to update?
I didn't bother to update tbh. It's just a warning. Might run into some space or performance limitations with newer versions of linux on that tiny CPU...