leak from the breathing hole. But if both gauges are showing the same pressure than most likely the adjustment screw is too far out or the piston is damaged.
@Airgun_Tech same here I had a leak from breathing hole so I got a new reg from fx usa it fixed everything now it's showing the same air pressure on both gauge but if I shoot it goes to 200 bar but over night it's back to showing the pressure man it sucks because I'm using a 300 bar 700cc bottle but I only fill to 250 bar I have fill to 275 bar before but I stopped because I don't want to ruin my gun ty for the info
I had to buy another front reg the brass cup it like bent on both regulater that I have I don't know why like wtf I know that the black piston is supposed to go through it well on the two that I have they don't idont why or what happened crazy its like it made one side smaller then other side that goes in the block 😮
Hello sir, A question pls : Will this M3 bottle connector also fit Crown MK2 ? Looking for a way to make optimal use of my 300bar bottle i ve mounted on the Crown. Thank you. Lester
Did you have a leak from breathing hole or were both gauge showing equal in air pressure and you fix it 🤔 thanks for sharing bsafe buddy 👍
leak from the breathing hole. But if both gauges are showing the same pressure than most likely the adjustment screw is too far out or the piston is damaged.
@Airgun_Tech same here I had a leak from breathing hole so I got a new reg from fx usa it fixed everything now it's showing the same air pressure on both gauge but if I shoot it goes to 200 bar but over night it's back to showing the pressure man it sucks because I'm using a 300 bar 700cc bottle but I only fill to 250 bar I have fill to 275 bar before but I stopped because I don't want to ruin my gun ty for the info
Well I screwed in the adjustment screw a little in and it's holding at 210 bar so far I pray it stays there 🙏
I had to buy another front reg the brass cup it like bent on both regulater that I have I don't know why like wtf I know that the black piston is supposed to go through it well on the two that I have they don't idont why or what happened crazy its like it made one side smaller then other side that goes in the block 😮
Hi
I've probleme to find the good size of o ring for the 1st regulator and i see in diagram there is not reference please help me to know
Thinks bro
Hello sir,
A question pls :
Will this M3 bottle connector also fit Crown MK2 ? Looking for a way to make optimal use of my 300bar bottle i ve mounted on the Crown.
Thank you.
Lester
Hi, This regulator will not fit on the Crown no. The threads are bigger to make space for the filling hole and regulator in the same housing.
Hi , do you clean and polish the liner as well
I do clean my barrels yes but I only polish them if they do not perform according to what I expect
Hi
Pls size exactly of oring of this regular plz and number in diagram
Thanks