6.4 HEMI Engine Swap into Chevy C10!!! The HEMI Hauler ep 1
ฝัง
- เผยแพร่เมื่อ 18 พ.ย. 2020
- Introducing the Hemi Hauler to the Channel! Follow along as I jump back into the world of fabrication on the 6.4 engine swap into my Chevy C10 pickup. A little bit of talking in this episode as I explain what the plan is and what parts are involved. I hope you're as excited as I am to see this one finished! This engine is sick!
Get your T-shirts to support Reignited here:
www.reignitedtx.com/
My Instagram: @reignited.tx
Email: Sales@reignitedtx.com
Here is a list of the most commonly used tools on my channel, I'm only listing actual tools that I have been using for years and that I have a proven track record with. I've been a certified dealer tech for over a decade, and I use these tools day in and day out. The camera and microphone you can see and hear their quality in every video. Obviously if you purchase a tool using one of these affiliate links I'll get a small commission on it and every little bit helps me to continue generating more content! Thank you guys so much for watching and interacting!
Amazon Affiliate links:
My absolutely amazing gloves I've been wearing for 7 years now: amzn.to/3oOMMqy
Canon M50 camera bundle: amzn.to/2HclRUD
Saramonic Blink 500 mic bundle: amzn.to/3m00fcC
Milwaukee 1/2" Fuel impact kit with case, battery and charger: amzn.to/2H973FT
Milwaukee 1/4" impact with battery and charger: amzn.to/3dzvGb3
Ingersoll Rand 3/8" impact :amzn.to/2HjJx92
My favorite wrenches! Gear wrench double box end set 8-19mm: amzn.to/2FDKxEN
Gear wrench stubby wrenches 10-19mm: amzn.to/3k9zm5K
Gear wrench reversible ratcheting wrench set Metric 8-25mm: amzn.to/3462zsA
Milwaukee 3/8 ratchet, tool only: amzn.to/348j1J6
Milwaukee 1/4 ratchet, tool only: amzn.to/31dewej
Gearwrench 1/4 swivel sockets 5-15mm: amzn.to/2T3MmOn
Autel professional scan tool: amzn.to/35abxVa
Gear wrench 21-25mm wrenches: amzn.to/2FHvBWe
U.S. general tool cart 5 drawer: amzn.to/3j4emvH
Double flex head ATD offset wrenches 8-19mm: amzn.to/348rewB
Vacuum coolant bleed machine- amzn.to/2TvUO98
My Instagram: @reignited.tx
Email: Reignitedsales@gmail.com - ยานยนต์และพาหนะ
I agree with you. LS swaps are done so much that it's hard to keep interest in them. This is out of the box for sure...
Started building custom headers for it today, video coming next week! Thanks for watching 👍
ya but is nice for chevy stuff because it does drop into place and alot of stuff is similar for the 1st timer guys that have never done a swap
Oooweee!! Glad to see this. I don’t feel bad at all now. I was on the fence with this. I’ve got an 88 Monte Carlo LS. Gotta 2006 5.7 HEMI and trans. Going with the 392 stroker kit!! Damn right dare to be different!!🤟🏾🤟🏾
Heck yes! I need to see pictures of this when you do it 👍
Love the project! Looking forward to seeing it come to fruition
working feverishly on it now!
Yes Chevy hemi
I got rid of the Junky part of it 😉
I love those trucks. Everybody else does too, I can't believe how much they've gone up in price! It's definitely going to be unique and a sweet ride 😁👍
Kelly, you're the OG squarebody fan 👍, miss that giant red one you had!
I love it, I put a LS in a 70 Duster and my 59 FC 170. Because I had those engines in my shop. So why not. Dope Truck I have some videos of both rigs on my channel if your interested. I am sure I might see you at the car shows. I live in the PNW area.
I'd love to put a 6.4 into a duster 👍
@@ReignitedAuto same here
This is gonna be a fun build! Just let the rear tire traction be the weakest link in your driveline and you should be fine. Those headers are going to be interesting might have to show some of your tig welding skills. Whatever you do it’ll be one sweet custom C10.
Thanks Joe! I'm actually looking forward to making the headers, at least right now I am 😂
Some would ask why is he doing this? Others understand that this is a mechanical form of art work. Taking what you have, what you can find, what you can make and putting it together and having everything work as it should. Reminds me of hot rod builders from the 50s. Watching this!
I think you'll like the holley terminator ecu system I'll be controlling this with, its pretty amazing.
I’m doing this exact thing with my 71 c10
Cool project!
Sooo much better with a manual, thank you for this!
Its going to be fun! Until that clutch slips immediately 😂
Looks promising , keep up the good work 👍
Lots of updates coming soon! Thanks for watching 👍
Love your videos bro keep it going
Thanks man, new c10 video just got posted today!
Great idea. 👍
I really want to used a Ford 6.7 diesel in my square body. I have that engine in my daily driver. I love it, but it does weigh on my mind how "others" will see this move. 😱
To me the entire point of car/modifications is to express your creativity. Trying to do so using others standards is a losing proposition, do what you think is cool and you'll be happy in the end 👍 plus, I'd like to see a 6.7 in a squarebody 😎
Nice!
Awesome build man!
Thanks man! Lot's of new update videos coming out on it now 👍
I've watched quite a few of your motorcycle builds, I thought then I was impressed....
I cant wait to watch the next video!
Finally, a Chevy with a real engine!
Thanks for watching Glenn! 👍
Loved my 84 Gmc hated the junk 350 in it, head gasket blew in 0° weather and it was a dog.
I'll be honest, I'm not much of a chevy 350 guy. I am an LS fan, but the older engines just don't do anything for me. Thanks for watching! 👍
Found the memo 😂
Good job. 👍
Thanks Bill!
Man how did I miss the channel???!!
Awesome build brotha
Thanks for watching man!
Bad ass! Mopar in a chevy!!
If you ever need any help. I'm next door in Louisianan. I do both manual and CNC machine work. Lathe and mill.
What a cool project. I can’t wait to see how the transmission works out. I’m betting that clutch will fry🤔
Me too 😂
cool build
Thanks! and I appreciate you watching 👍
Im looking in to this as we speak.
Do it, this truck is incredibly fun to drive! 👍
@@ReignitedAuto just curious what pcm did you use. I'm taking mine out of a newer dodge ram and im not sure on the pcm. I've done ls swaps and just used to pcm but in this case I being so new its going to be harder.
Awesome project man, and kudos for giving the trans setup a chance. But I think, like you said, it's going to be the weak link 100%. You are going to be, what? doubling the torque going through it? What is that clutch rated for? looking forward for the rest!
Thanks man! I can't wait for it to explode spectacularly at my feet 😂. More likely it'll just slip horribly. But I appreciate you watching, hope you continue to follow along 👍
Wish I would have found this a little sooner, it would have saved me a fair bit of time figuring out transmissions. We pretty much came to the same conclusion though so that is interesting. I am planning on grabbing a few different manuals and comparing them. Starting with the AX15, NV3500, NV3550 (If I can find one) and of course the AR5. Interesting about the flywheel, I used one for the earlier Hemi, Luk LFW249 which allowed me to bolt the 11inch clutch from a 2002 Dakota. Have not tried bolting it all together yet so might not work...lol, plus need to figure out a starter if it does. At any rate very much enjoy the content and look forward watching the build!
There is a serious lack of information out there that's for sure! I did find out after the fact that supposedly the older 5.9 bellhousings will bolt up as well, only 1 or two bolts won't line up, but I haven't been able to confirm that myself. I'm still skeptical about the clutch holding the power of the 6.4 engine. I do know that the 11" clutch from a Dakota will not work in the AR5 bellhousing, it's too big.
@@ReignitedAuto Completely agree on the lack of information, but that is half the fun, finding out what works and what doesn’t. Yes I believe you’re correct about the 5.9, I think it’s just the top centre bolt is not used on the Hemi’s but have yet to confirm that. Good to know about the 11 inch clutch, I will keep that in mind, right now I am using the NV3500 so it should be okay.
Awesome I'm a former dodge tech and I have a 78 k20 and a 6.4 hemi that I want to do this
DO IT! 😎
I know you're already done with the build. but, have you tried finding an aftermarket bellhousing for the tremec T56 that will fit the hemi? or possibly adapting the tr6060 bellhousing for the challenger to the T56? At some point I will be building something with a hemi and a 6 speed and if I can find a T56 cheap enough I plan on trying that route.
Where are the new progress episodes ????
All the videos for this series are on a Playlist on my main channel page, and there's a separate Playlist that chronicles how the truck did at Rocky mountain race week. Thanks for watching! 👍
Putting a 5.7 hemi in a foxbody. What transmission did you use?
Great tip on how to remove broken stud that is flush with the head. How do I access your video on the lifter roller problem, I've been told that I have a misfire Code P0302 on cylinder #2. Does this mean I need a new engine rebuild or could the misfire code be attributed to something else ie: spark plug, wire etc.
I have a few different videos on lifter replacement, for myself I'm definitely checking the easy stuff first. Always better to rule out the simple things like a coil or spark plug. 👍
so there is no reason why I couldn't put a 6.4 HEMI in my 03 Ram 1500 4X4? does the 03 Ram 2500 have a 6.4 and if so, what do I have to change to bolt it up to my 03 1500?
I am considering a 6.4 hemi engine and trans for my Chevelle. Too many LS swaps…
You know, something I was surprised about is that while I was on Rocky Mountain Race Week with the truck, the response of people seeing it was overwhelmingly positive. Even the hardcore Chevy guys thought it was really cool. So I thought that was neat, was definitely expecting more hate to come my way. I'd love to see a Chevelle with a Hemi in it! 👍
I am planning to put a 6.4 in my 55 chevy 210 post.
Do it! That would be a riot 🏋
I am also wanting to do drag week, rocky mountain and power tour when car is finished.
@@carrramsey428 there's just something irresistible about those events isn't there? Just sounds like so much fun for car guys 👍
can you put a dodge ram 1500 motor & engine in a 1970 Chevelle ?
It would be a very similar process to this project, so yes you can 👍 But me personally? No I won't 😄
Congrats an amazing project!!! And your videos are so fun and useful to watch. But IMHO putting a crossbreed engine is a sacrilege, You should do that to a Dodge or Plymouth truck ,anyway keep those great clips coming!!
Thank you so much I appreciate it! Lots more videos on this truck are coming soon! Check out the current playlist to see the other four videos I have out on it 👍 thank you for watching!
@Pure Grain Liquor's Tool Shed I know ,is only MY opinion,but ,I am certainly older than You and was born in early sixties,so simply I have a different point of view,as told U ,you are doing a fine car, but again I will never use an engine brand different to the car brand,I have a 67 Firebird ,has a 400 Pontiac,all the young fellows advise me to swap to a Chevy ,because is cheaper and much more powerful ,I will always keep it Pure Pontiac, and if someday got extra cash ,I will buy a Jim Butler's engine, so my friend ,enjoy your ride,actually I am very interested in how You will deal with the harness ,computer and all the electrical wiring
I don’t feel the same way I will do anything else then LS motor on my trucks
They are great engines and I don't question anyone who does want one, but its fun to do something different 👍 thanks for watching!
I'm still thinking coyote!!!!
🤣🤣🤣🤣🤣
Honestly, I think a coyote would be the only thing to annoy the purists even more than the Hemi! But I can't give up the extra 1.4l of displacement! 😄
@@ReignitedAuto
Blah blah!
Hemi
Shmemi!!
Lol!
@@css550fun7 you're a traitor to your own people! Oh wait, I drive a ford too 😂
@@ReignitedAuto 🤣🤣🤣
Yes you do!
I know where you got that 5/8 drill bit
😂 I've got like 20 of them in my box, quite handy!
I am doing a 74 scout and really want to put a 6.4 hemi in it
Would love to see that 👍
Oh boy, you really want to irritate the purists.😂😂😂 Good for you. That's gonna be one sweet machine when it's done. Would love to see a build series on that. Good luck and have fun.
5.7l Hemi swap a single cab Chevy
What do u think? I would LOVE 2 put a HEMI in a 92 chevy K5 Blazer/ Tahoe with an interior swap.
I think any time you can take an old Chevy 350 off the road you should do it. Or better yet a 305 😄
I want to do this swap into my 96 suburban as well
How cheap can you find a 6.4
Here's the thing with the purists and all the whining. If you were to tear up something like an original wing car, hemi charger, something like that- then yeah, you probably deserve some grief. But at the end of the day, it's your build, your time and money involved. So I believe you have the right to do whatever you damn well please! With this build, there shouldn't be an issue whatsoever... Nice build, it turned out great.
SAVE YOUR BACK that lift of the transmission onto the motor was terrible save your body
You're right about that. My major concern as a tech was lasting back issues. So generally I try to not do stuff like that. Sometimes my desire to just get things done over-rides my common sense! Thanks for watching 👍