How the hell did u polish the timing cover😂. Great job on the video it looks good that polish job makes it look like a refreshed motor. Thanks man im thinking about doing this to mine once the oil leaks are fixed
@@gzsoto I used the drill with both wire brush attachments that I showed in the video and tried my best to get around the crevices and houses. It didn’t fully polish it but did clean it up and make it look a lot better than before.
I used the smaller brush to get inside the corners and smaller places and the bigger one for the flat surfaces. But definitely prefer doing it this way over taking the whole timing cover off because that’s way to much work.
It’s from eBay here is the link www.ebay.com/itm/JDM-BILLET-ALUMINUM-RED-RACING-ENGINE-BAFFLED-OIL-CATCH-TANK-CAN-RESERVOIR-/391711462869?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l6249&mkrid=711-127632-2357-0
Why do all of these videos have the stuff to make it but don’t tell us where to buy I swear y’all need to add where you buy the things because how is it gonna help us when you don’t put where you bought it from
This is the best and most simple, quickest, and effective video I’ve seen regarding the polishing of a Plenum. Thank you
Came out really good I’m impressed, the buffer really took the scuffs away it looks sick 👍👍
How the hell did u polish the timing cover😂. Great job on the video it looks good that polish job makes it look like a refreshed motor. Thanks man im thinking about doing this to mine once the oil leaks are fixed
Did you use the rotary tool? And if so, for what areas? Thanks! Ima try this myself!
No I didn’t use the rotary tool. But if I would have used it for the crevices and corners it would have came out better.
@@Yari_vq thank you! Because of your video I’m gonna try this myself! But gonna use a higher grit for more shine! Thanks again!
@@Yari_vq can I ask how you did the timing cover? Pls go into detail! Thank you!
@@gzsoto I used the drill with both wire brush attachments that I showed in the video and tried my best to get around the crevices and houses. It didn’t fully polish it but did clean it up and make it look a lot better than before.
How did you polish the timing cover, with just wire brush? Looks way better, I may do this to mine.
I used the smaller brush to get inside the corners and smaller places and the bigger one for the flat surfaces. But definitely prefer doing it this way over taking the whole timing cover off because that’s way to much work.
@@Yari_vq but then how do you buff the timing cover
@@thebloodcross93 i had to buff it by hand
@@Yari_vq came out sexy af
@@thebloodcross93 Thank you. It’s not perfect but definitely better than how it was.
Nice!!! I need to do mine 🔥🔥🔥
Where’d you get the pads and wire brushes
I got them from Lowe’s but Walmart also has them.
Do i have to remove the plenum to do this shit i just put it back together idk if i got the energy to do it again rn 🤣 good vid
I mean you can do it on the car but the dust will get all over the engine and it’ll just get messy😂
What drill bit did you use to clean the timing cover? Brass also?
Yes it was brass also. I used the smaller one to get into the crevices and the larger one for the flatter surfaces.
Bruh didn’t even get the pits out of the plenum 🤦🏽♂️ when I did mine it took me two weeks but it’s perfect
Did you remove the timing cover to polish it?
No I didn’t remove it I just polished it on there
@Jougan Nindo which one do you mean? The drill or the polisher?
What catch can do you got ?
It’s from eBay here is the link
www.ebay.com/itm/JDM-BILLET-ALUMINUM-RED-RACING-ENGINE-BAFFLED-OIL-CATCH-TANK-CAN-RESERVOIR-/391711462869?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l6249&mkrid=711-127632-2357-0
Why do all of these videos have the stuff to make it but don’t tell us where to buy I swear y’all need to add where you buy the things because how is it gonna help us when you don’t put where you bought it from
Walmart and Lowe’s the two places I went too
@@Yari_vq thank you because I’m trying to polish my plenum while I’m working on my car
@@adrianreyes7464 no problem I had done the same thing since I had it off already
@@Yari_vq can you send me a link or something so I can go and buy it?
@@adrianreyes7464 here’s a couple links,
www.walmart.com/ip/Wheel-Grinder-Tools-Cups-For-Rotary-Drill-Portable-Removal-Steel-Wire-Brush/796872678
www.walmart.com/ip/100-300pcs-80-3000-Grit-2-Inch-Sander-Disc-Sanding-Polishing-Pad-Sandpaper-Tool-with-Shank-Backer-Plate-and-Sponge-Cushion/323364488?athbdg=L1700
www.walmart.com/ip/Century-Drill-Tool-76201-1-Coarse-0118-Wire-End-Brush-Hex-Shank/35038875