Cool info bro! But remember we own Infiniti’s for a reason! I see owners ripping their G’s apart! The more OG parts you rip off, will affect the value big time. All for 2hp, but hey, to each their own!
@@mj350gt2 💯 Facts!!! I tell these guys, sometimes the "cold" air intakes are killing your power. The stock intake in our G35's are made by engineers that have been doing this for generations. On my channel, my 06' Coupe has 49k original miles. It's stock, unmolested, untouched. I line u with G35's that have huge fart cans, intakes, and those stickers that add 10hp, and it's not even a competition! But, I not hating, cuz whn I was a kid, I did all that mess, and that's how I learned. As long as you look back at your car when you walk away is all that matters 🤙
@@speedracer2831 real recognize real! I own FBO (stock ECU) 08 G35S 6 speed sedan (V36), 177,000 miles , OG engine , OG trans, 0 issues for 5 years! Car is a beast and reliable ! Everywhere I go someone wants to buy it, or they leave notes on my windshield. VQBoyz 🇯🇵🐉
Heck yea g35 video ! Keep em coming bro 🤙🏽 unfortunately I do need this coolant line as I live in the beautiful state of Washington and we do get all four seasons does get really cold here winter time 🥶
Even in Sunny Florida, I don't see any advantage in deleting the Throttle Body Coolant lines for a Stock application. (Placebo) If you were going Force Induction ie. Turbo/Supercharger, then I would say yes, reduce your intake temperature as much as possible because of the EXTREME heat generated. Intercoolers are required to keep the intake charge reduced to the lowest temperatures from the high heat produced by the Turbo/Supercharger.
@@barnyard_fab Track and Racing is another world. A dual core aluminum radiator with extra capacity would be my choice. I tried the Mishimoto but the alignment pegs were way off. Perhaps there's another brand that fits better. Also use ICE made by Royal Purple. It promotes quicker heat transfer thus keeping your engine cooler in extreme operations.
@@stealthg35infiniti94 I use the mishimoto one with pretty much every delete you can think of in the cooling system especially heater core. Huge differences
The coolant lines that ran to the throttle body are ok to just leave like that uncover or anything after this?also great video thanks a lot super helpful
@@hbenicou yep, I rebuilt my vq, and I was pissed when I heard ticking, switch coil pack and she is smooth as butter. I also had ticking a few years ago, it was a pin hile on the exhaust flexes.
Hey bro! I have a 2004 g35 and it’s leaking coolant from the left side of the bottom of the engine crank. Any guess from where the coolant is coming from?
Hey I also had an alutec strut bar and also an angled Z1 plenum spacer but it kept hitting the top of the plenum and rattling does yours do this? I hated the noise and took it off.
I did a coolant bypass but I left the curved nipple open I did not put anything just left it naked. Will it do anything to my car any damage or over heat?
@@ERICSDIYGARAGE sweet thankyou!! I love your videos 🙏. What do you think about the coolant bypass with the front hose? I'm thinking about doing it but been hearing mixed reviews about the thermostat getting stuck? I live in California N I get similar wether like you in AZ minus the 95+ heat waves. Would you recommend me looking into a low temp thermostat to do that mod safely? Or can I cap them then bleed the system N everything will be fine with the thermostat? I park my car in a garage over night then drive it in 55°+ weather if that helps brother
@jaynene2625 sorry I meant to say 3/8 line will work not 1/4. I've learned that oem thermostats are the way to go. I've had a few mishimoto thermostats not open and cause a over heating problem. I wouldn't delete the line personally
if you don't live in Yakutsk go ahead and delete the coolant lines! thank you for watching lmk what you think about this method
Yeah I would not risk it lol
PA still not globally warmed yet. BUT, I on/off valve would be dope! 😁
Cool info bro! But remember we own Infiniti’s for a reason! I see owners ripping their G’s apart! The more OG parts you rip off, will affect the value big time. All for 2hp, but hey, to each their own!
@@mj350gt2 💯 Facts!!! I tell these guys, sometimes the "cold" air intakes are killing your power. The stock intake in our G35's are made by engineers that have been doing this for generations. On my channel, my 06' Coupe has 49k original miles. It's stock, unmolested, untouched. I line u with G35's that have huge fart cans, intakes, and those stickers that add 10hp, and it's not even a competition! But, I not hating, cuz whn I was a kid, I did all that mess, and that's how I learned. As long as you look back at your car when you walk away is all that matters 🤙
@@speedracer2831 real recognize real! I own FBO (stock ECU) 08 G35S 6 speed sedan (V36), 177,000 miles , OG engine , OG trans, 0 issues for 5 years! Car is a beast and reliable ! Everywhere I go someone wants to buy it, or they leave notes on my windshield. VQBoyz 🇯🇵🐉
MY BOY HAS A SHIFT TECH PLENUM. My man. I was one of the first buyers of their revision. glad to see you are supporting him
Definitely worth it 👌
Heck yea g35 video ! Keep em coming bro 🤙🏽 unfortunately I do need this coolant line as I live in the beautiful state of Washington and we do get all four seasons does get really cold here winter time 🥶
yeah if it freezes I would pass on this one
I'm gonna do it. But with a on/off valve. I gotta change my tire/wheel setup every season. One more thing to do, flip that switch!
Another solid mod. Love your content bro. Thanks for the reminder.
Thanks for the support!
Love the g35 content pls more. My shitbox needs a lot of shit fixed
anything in particular you want to see
@@ERICSDIYGARAGE 👋👋👋 I do....jack points. I'm going crazy trying to find jack points. And safe places for jack stands....thanks in advance 👍
No cap I've had a g for 2 years in April and I'd like to see this bc I still get nervous
@@zackcostigan2705 right! I get nervous I'm gonna crush something
Arizona in the building bro your the shit I'm never disappointed with your videos
Thank man! I'll keep bringing them out 👊🏼
@@ERICSDIYGARAGE much appreciated I'm about a hr away from you in Arizona
Great video brother
Thank you!
Even in Sunny Florida, I don't see any advantage in deleting the Throttle Body Coolant lines for a Stock application. (Placebo) If you were going Force Induction ie. Turbo/Supercharger, then I would say yes, reduce your intake temperature as much as possible because of the EXTREME heat generated. Intercoolers are required to keep the intake charge reduced to the lowest temperatures from the high heat produced by the Turbo/Supercharger.
Good for track cars, my coolant temps are high after a few laps drifting
@@barnyard_fab Track and Racing is another world. A dual core aluminum radiator with extra capacity would be my choice. I tried the Mishimoto but the alignment pegs were way off. Perhaps there's another brand that fits better. Also use ICE made by Royal Purple. It promotes quicker heat transfer thus keeping your engine cooler in extreme operations.
@@stealthg35infiniti94 I use the mishimoto one with pretty much every delete you can think of in the cooling system especially heater core. Huge differences
@@barnyard_fabyou’ve got instagram? i’ve got some questions
The coolant lines that ran to the throttle body are ok to just leave like that uncover or anything after this?also great video thanks a lot super helpful
Yes it's fine to leave them uncovered and thank you!
Hey bro good job im from phoenix too we should meet up
I guess I’ll give it a try lol
What’s the name of the assembly you removed at 3:56 ? My car is missing that 😢
Thank you
size of bolt to remove plastic engine cover
Please make a video on how to get rid of or diagnose the ticking sound
You mean the coils? g35s are notorious for having bad coils and ticking..
are you talking about the exhaust ticking after installing test pipes
@@ERICSDIYGARAGE nahh I don't have test pipes lol
@@elmedia1532 I'm guessing it's the coils lol then if not test pipes
@@hbenicou yep, I rebuilt my vq, and I was pissed when I heard ticking, switch coil pack and she is smooth as butter. I also had ticking a few years ago, it was a pin hile on the exhaust flexes.
What size coolant caps can I order 3/8 or 1/4 ? What one will fit the best ?
For the Throttle body, you need 1/4 For the other nipples you'll need 3/8
@@ERICSDIYGARAGE and the 3/8 will fit the two nipples coming from the hardliners right?
What's the piece called at 4:49? The piece with the two hoses and harness that clips in
Did you see any gains with the plenum spacer?
Yes
JUST BUY IT!!!!! Buy every bolt on they all help. Thanks for attending my ted talk
What size plug do you need? I wanted to buy the plug instead of the free version. Is it 1/4in ?
3/8
Hey bro!
I have a 2004 g35 and it’s leaking coolant from the left side of the bottom of the engine crank. Any guess from where the coolant is coming from?
Your water pump is probably bad
Is there any adverse effects on cars in hotter regions like say Africa?I’ve got a g35 coupe in 🇳🇬.
No I live in Phoenix AZ so pretty hot here too
@@ERICSDIYGARAGE , thanks for the feedback 👍🏾
Did you need to bleed the cooling system after this
No
I couldn’t see the back one :(
Forgot to block off the throttle body.
you don't need to block it off it's not going to do anything if you leave it open
Hey I also had an alutec strut bar and also an angled Z1 plenum spacer but it kept hitting the top of the plenum and rattling does yours do this? I hated the noise and took it off.
No mine has plenty of clearance
@@ERICSDIYGARAGE oh wow that sucks lucky for you. I decided to give it away to a good friend as a gift since I didn't like the rattling.
I did a coolant bypass but I left the curved nipple open I did not put anything just left it naked. Will it do anything to my car any damage or over heat?
You don't need to cover the plenum nipples
@@ERICSDIYGARAGE if i wanted to cover them will 1/4 rubber vaccum cap work?
@jaynene2625 yes
@@ERICSDIYGARAGE sweet thankyou!! I love your videos 🙏. What do you think about the coolant bypass with the front hose? I'm thinking about doing it but been hearing mixed reviews about the thermostat getting stuck? I live in California N I get similar wether like you in AZ minus the 95+ heat waves. Would you recommend me looking into a low temp thermostat to do that mod safely? Or can I cap them then bleed the system N everything will be fine with the thermostat? I park my car in a garage over night then drive it in 55°+ weather if that helps brother
@jaynene2625 sorry I meant to say 3/8 line will work not 1/4. I've learned that oem thermostats are the way to go. I've had a few mishimoto thermostats not open and cause a over heating problem. I wouldn't delete the line personally
idle rpm become low after delete coolant hose?
No it shouldn't normal idle I'd 650 to 680 rpms
Hey you know how do this in the B15
SR20?🤔🤔🤔
I'll look into this maybe I can do a Delete on it as well
Does it lower the engine temperature on your car? If you bypass the coolant lines on the throttle body?
No this doesn't make that much of a difference in engine temperature
if i want 2 order the caps for the hardline nipples, what size do i get? 3/8?
what are hardline nipples? the nipps on the intake plenum or the nipps to the main coolant lines where he added the bolt? thanks!!
Does anyone know where I can get a carpet for my 04 g35? Like maneee i been lookinh for a black one but I can’t find any
I have a g35 that I'm parting out that has a good black carpet but only selling locally in Phoenix az
@@ERICSDIYGARAGE i need the carpet, I mean if it’s black
@@ERICSDIYGARAGE tho I’m in Texas
Anyone know the size hose ?
3/8
@@ERICSDIYGARAGE appreciate you now I can just order the caps I realized the z1 tb has no fittings for cooling the tb so I need to delete it
WARNING ⚠️ DO THIS AT YOUR OWN RISK I HAD TO BUY OTHER CLAMPS FOR THE HOSE DOING THIS
Until you sell the car to someone who actually needs the lines where’s its cold!
Unless they move to Alaska it will be fine
What this mod does for hp?
People say you get 5 whp but I haven't found any dynos
Don't do it, it's a waste of time
It's only a waste of time for you
Yup, less bay clutter is such a waste of time. You know the G’s already have so much room to work with why remove anything!😂😂😂😂