Nice igor, wee tip for ye although it wasnt shown. The slider pin with the rubber goes on the trailing edge. Suzuki would be crosshead JIS, looks like a philips but isnt, cheers dave
dave sterl thanks Dave I should have mentioned about the pin with the rubber good tip, i have to be honest I wasn’t aware of the JIS screw until Ive watched your videos I was expecting the Suzuki to have but I believe I used a JIS bit without realising, I will check and maybe do a quick review on the impact driver from Halfords I think it came with JIS bit, I bought some vessel JIS bit and compared them and they are exactly the same cheers 👍👍👍
Nice, good and careful work, properly and thoroughly done. On my Jazz (which got me to your channel in the first place with the Jazz exhaust episode) my driver side front was stuck solid too, but in this case it was the caliper piston stuck rock solid in its cylinder, absolutely immovable, pads and disc fine, so I had to buy a new caliper assembly (34quid ebay) and all is fine now. Your workmanship is very good, thanks for the video. Best wishes from Alan, in Norfolk.
alan may thanks Alan 👍 cool I remember the Jazz exhaust video... Good call there with the caliper I’m glad you got it sorted ... thanks again for viewership 👍👍👍
The discs I got have an alignment screw hole keeping the disc in place that doesn’t line up with the hub, I thought they must be the wrong part but I checked and they are correct for my car….the wheel nuts hold the disc in place obviously when the wheel is on but I’m still concerned that the hole doesn’t line up and I have no screw in there.
Hi mate, can you show how to adjust the handbrake on these suzuki swift? I'm having issues with mine not grabbing the rear brakes enough when the handbrake lever is pulled
Great job Igor! Familiar sight working in the rain 😂 We should have asked Santa for a garage this year but I'm on the naughty list so I didn't waste my time 🙈👍😂😂😂
Niamh Healy thanks Niamh 🤣🤣🤣 I’m on the naughty list aswell but I dare to ask will see 🤷♂️😇😂😂😂 cheers for popping by I hope you two had a fantastic Christmas and all the best for 2020 Xx
Thanks mate... Unfortunately not yet I bought the parts and every time I picked the day to get it done it rain really heavily hoping to do it soon and film it stay tuned 👍
Mark Smith excellent ... unfortunately I haven’t yet I bought the parts but every time I organised myself to do it, it rained pretty heavily 😓 but stay tuned I’m doing it soon and film it 👍
Mark Smith I’m still using but avoiding motorways it slips badly around 60 to 70 mph in 5th or 6th gear, just waiting for a break with the weather cheers 👍
Nicely done there, I think some garages do rush jobs on brakes so it is cheaper and the customer thinks they're getting a bargain but it's a total false economy. Do you do this as your main job or a bit on the side?
Lee Smith thanks mate... I believe it does happen but in this case the girl owner of the car told me her Mum’s boyfriend replaced the pads not long ago at home... It’s a bit on the side trying to build some experience as I love to work on cars and hopefully have my own garage in the near future 👍👍👍 cheers
Good call on which brake it was. My money was on you! (ha ha) Oh no, working in the rain again. I'm in Germany and we're having lot of rain too. Nice job on cleaning up the hardware. They should be good to go now. I hope you had a great Christmas.
wyattoneable thanks mate I even got a Starbucks coffee for getting it right 😊🤣, super wet here at the moment in UK... Do you have family in Germany ? We are so close probably about a hour away flying off course 👍👍👍
@@CarsExposed My wife was born here and has a brother and nieces to visit. It's her first time home for Christmas in 25 years. (I always had to work on Christmas before).
wyattoneable awesome Wyatt 👍 kind of the same here I spent only 1 Christmas with my family in Brazil in 16 years ... if you ever come to Uk give us a shout 👍👍👍
bauuau18 sorry man I’ve showed in other videos but I agree I should have included the clip pushing it back it was super easy when I did tho, did you remove the brake fluid reservoir cap otherwise it will be difficult ?
![[LIVE] : ONE ลุมพินี 87 วันนี้!! คู่เอก "ก้องชัย vs โชคปรีชา"](http://i.ytimg.com/vi/YN6e7HVnekw/mqdefault.jpg)
![How to change front brake discs and front brake pads set on SUZUKI SWIFT 3 [TUTORIAL AUTODOC]](/img/n.gif)
Nice igor, wee tip for ye although it wasnt shown. The slider pin with the rubber goes on the trailing edge. Suzuki would be crosshead JIS, looks like a philips but isnt, cheers dave
dave sterl thanks Dave I should have mentioned about the pin with the rubber good tip, i have to be honest I wasn’t aware of the JIS screw until Ive watched your videos I was expecting the Suzuki to have but I believe I used a JIS bit without realising, I will check and maybe do a quick review on the impact driver from Halfords I think it came with JIS bit, I bought some vessel JIS bit and compared them and they are exactly the same cheers 👍👍👍
@@CarsExposed excellent
Excellent helpful video. Thanks!
Nice, good and careful work, properly and thoroughly done. On my Jazz (which got me to your channel in the first place with the Jazz exhaust episode) my driver side front was stuck solid too, but in this case it was the caliper piston stuck rock solid in its cylinder, absolutely immovable, pads and disc fine, so I had to buy a new caliper assembly (34quid ebay) and all is fine now. Your workmanship is very good, thanks for the video. Best wishes from Alan, in Norfolk.
alan may thanks Alan 👍 cool I remember the Jazz exhaust video... Good call there with the caliper I’m glad you got it sorted ... thanks again for viewership 👍👍👍
thank you Sir for sharing the brake pad /disk replacement process
Very thorough Igor. Sadly we never saw that model year as Suzuki had long since folded up the tent in Canada and the States. Cheers
TheGibby3340 cheers Ian it’s a shame they closed the doors in North America ... they seem to be going strong here 😊💪 cheers 👍
Top notch work mate. Can't beat a nice new set of brakes 👍
Badgertronix thanks mate for some reason always feels good when you have new brakes or new tyres 😊👍👍👍
Nice video dude, those pads for rear and back wheels are same?
The discs I got have an alignment screw hole keeping the disc in place that doesn’t line up with the hub, I thought they must be the wrong part but I checked and they are correct for my car….the wheel nuts hold the disc in place obviously when the wheel is on but I’m still concerned that the hole doesn’t line up and I have no screw in there.
Brilliant work mate...
Johnny's Speed Shop cheers mate 👍👍👍
Hi mate, can you show how to adjust the handbrake on these suzuki swift? I'm having issues with mine not grabbing the rear brakes enough when the handbrake lever is pulled
Great job Igor! Familiar sight working in the rain 😂 We should have asked Santa for a garage this year but I'm on the naughty list so I didn't waste my time 🙈👍😂😂😂
Niamh Healy thanks Niamh 🤣🤣🤣 I’m on the naughty list aswell but I dare to ask will see 🤷♂️😇😂😂😂 cheers for popping by I hope you two had a fantastic Christmas and all the best for 2020 Xx
Good work man!
Rookie diagnostics and repairs thanks mate 👍👍👍
Nice one!
Thanks mate 👍👍👍
Boom first ! Merry christmas !
Thanks Giorgi Merry Christmas to you too 👍👍👍
Nice job mate
bodgit and leggit garage cheers mate 👍👍👍
Excellent job mate well done, have you done the clutch in your megane yet.
Thanks mate... Unfortunately not yet I bought the parts and every time I picked the day to get it done it rain really heavily hoping to do it soon and film it stay tuned 👍
Does the handbrake re adjust itself?
Merry Christmas mate hope you had a good one
Mark Smith thanks mate Merry Christmas to you too, lovely day yesterday plenty food and laughter, I hope you had a good one too 👍👍👍
@@CarsExposed I did mate have you fixed your Renault yet mate
Mark Smith excellent ... unfortunately I haven’t yet I bought the parts but every time I organised myself to do it, it rained pretty heavily 😓 but stay tuned I’m doing it soon and film it 👍
Are you still using the car hopefully the weather will be better for you
Mark Smith I’m still using but avoiding motorways it slips badly around 60 to 70 mph in 5th or 6th gear, just waiting for a break with the weather cheers 👍
Nicely done there, I think some garages do rush jobs on brakes so it is cheaper and the customer thinks they're getting a bargain but it's a total false economy. Do you do this as your main job or a bit on the side?
Lee Smith thanks mate... I believe it does happen but in this case the girl owner of the car told me her Mum’s boyfriend replaced the pads not long ago at home... It’s a bit on the side trying to build some experience as I love to work on cars and hopefully have my own garage in the near future 👍👍👍 cheers
Good call on which brake it was. My money was on you! (ha ha) Oh no, working in the rain again. I'm in Germany and we're having lot of rain too. Nice job on cleaning up the hardware. They should be good to go now. I hope you had a great Christmas.
wyattoneable thanks mate I even got a Starbucks coffee for getting it right 😊🤣, super wet here at the moment in UK... Do you have family in Germany ? We are so close probably about a hour away flying off course 👍👍👍
@@CarsExposed My wife was born here and has a brother and nieces to visit. It's her first time home for Christmas in 25 years. (I always had to work on Christmas before).
wyattoneable awesome Wyatt 👍 kind of the same here I spent only 1 Christmas with my family in Brazil in 16 years ... if you ever come to Uk give us a shout 👍👍👍
I suppose I owe you a posh coffee. I was 100% it would have been the front 😁
Lucian Razec indeed I guess I have to come to Romania now 😊👍👍👍
I’ll send it over but it’ll get cold. Or you can have one when we meet next 😉
Lucian Razec next time we meet is good to me 😋👍
Mine is same 2014 ddis calipers seizing on intermittently.
👍
You didn't show how you pushed the calliper back. Currently struggling to push mine back
bauuau18 sorry man I’ve showed in other videos but I agree I should have included the clip pushing it back it was super easy when I did tho, did you remove the brake fluid reservoir cap otherwise it will be difficult ?
Cars Exposed do you have to screw it in?
🤣🤣🤣🤣 rear left boom
bodgit and leggit garage I won an eggnog Starbucks coffee 🤣🤣🤣🤣
@@CarsExposed 🤣🤣🤣🤣