150cc Go Kart Carburetor Tuning & Ride
ฝัง
- เผยแพร่เมื่อ 28 ก.ค. 2019
- Today we get to see the fruits of our labor on the 150cc go kart. This kart performs a ton better and will get more upgrades on the weeks to come. Don't forget to like, comment and subscribe for more content!!!
Parts Used On This Build -
150cc Rebuild Kit - bit.ly/2LCikyI
24mm Flat Slide Mikuni - bit.ly/2LCiRRe
Stock Performance Jetted Carb - bit.ly/2LJFDGG
150cc CVT Kit - bit.ly/2LB37hn
A12 Cam - is.gd/nrYpJh
Ported Head - Lansdown Family Racing
Aluminum Intake - ebay.to/2LFc9K4
Stock Intake - bit.ly/2xywvg4
Timing Chain Tensioner - bit.ly/2LCyIPz
115mm Variator - ebay.to/2LFc1KA
Performance CDI - bit.ly/2LDnSsU
Ignition Coil - bit.ly/2xzFjlC
NGK Spark Plug - bit.ly/2LB49df
Battery - bit.ly/2xywoBa
150cc CVT Roller Weights - bit.ly/2LCSQRS
150cc Brake Kit - bit.ly/2xvSC6T
150cc Wheel Hubs - bit.ly/2LLMuzx
Check Out Our Merch - RBGKarts.com
Check Out Go Power Sports for all your Go kart needs!
goo.gl/OoWVDK
Parts & Tools used on the channel - amazon.com/shop/redbeardsgarage
Quantum Welding Table - goo.gl/V9dHPp
Everlast Welder - goo.gl/8DRgZe
DuroMax Generators, Pressure Washers, & Engines goo.gl/GfBpNp Use 20% code RBG on ALL DuroMax products
Tube Buddy Affiliate- www.Tubebuddy.com/RBG
Help support us on Patreon - patreon.com/redbeardsgarage
Want to donate without the commitment? - paypal.me/redbeardsgarage
Want to send us something?
Red Beard's Garage
P.O. Box 572
Sweetwater, TN 37874
Facebook - redbeardsgarage
Instagram - redbeardsgarage
Google+ - redbeardsgarage
Pinterest - redbeardsgarage
Twitter - redbeardsgarage
----------------------------------------------------------------------------------------------------------------
Instrumentals by Chuki Beats - / chukibeats
----------------------------------------------------------------------------------------------------------------
*********Disclaimer*********
Please do not try to re-enact or recreate anything you see in these videos. We are trained professionals. Red Beards Garage does not take any responsibility for injury's created by doing so.
#RBGKarts #RedBeardsGarage - บันเทิง
That just scoots along really good !!! Looks like a blast to drive !
I've been watching your channel for quite a while now, my daughter and wfie just recently started watching it with me. My wife and daughter really enjoy when Mrs Redbeard and the other little girls are on. You have a very family friendly show we all sit and enjoy together. Thanks and keep up the great work.
Mrs. RBG is ROCKING those yoga pants. God bless the inventor of yoga pants...
I've worked on alot of 150cc engines. Take a cut off wheel to the end of the muffler and remove the baffle and re-weld end back on . Helps with low end torque.
just a quick tip: when you apply air filter oil, you want to soak the filter in the oil completely, and then squeeze out the excess. Don't ring the filter element out, just gently squeeze out the excess. If you don't have any coming out, you haven't oiled it enough.
always great to be here, thanks for another awesome video!
You and your team (family) are the best, love the videos an the work put into them!
Good stuff!
Cool little cart.
really cool and plenty of power!!! nice rooster tail with you in the cart. not even working to get up the hill from a dead stop at the bottom.
That thing rips!!!!
Absolutely love these buggies 🤘🏻🐿🤘🏻
Wow I’m being promoted from here ! Awesome 👏🏽
I traded the yarf dog with a 39 inch live axle for a 2005 Twister Kart with a 150cc. When I got it the front brakes weren't bled and not working. I had to buy a new master cylinder and couldn't get it to bleed soooo I had to pressure bleed the system. I took a thin piece of rubber a piece of thin plexiglass and a tire pump with a needle for a ball and a C clamp. The hole in the master cylinder was so small I couldn't get enough brake fluid into it fast enough by just using the foot peddle. This worked very good. I think next is the engine upgrade. Great job!!
Love the content red beard keep it up I'm going to get me one and make it bad one day!
Becca : don’t flip us !!
Braxton: I never flipped nothin
Becca : TREE!!!! 😂😂😂😂
I just love you guys...
Luv ya work mate b careful revin em they will spit a valve or head stud for fun great rebuild she halls balls nice one cheers
Shout out to Mrs Red Beard for chillin in the weeds to get the good shots. Your camera work has improved 👍
I bought the clutch and slide weights that y’all did, did you change the 2000rpm clutch springs when you put the 1500rpm main spring? I know mine woke up after putting a 130 jet carb on from the 95 stock, as well as installing the new CDI you recommend
Love the channel! Thanks for all the great info. And thanks for all the parts links on each vid. Don’t mean to pick but I couldn’t find the muffler in this video. Picked up a nearly identical American Sport Works Carbide 150cc. It’s nearly time to replace the old stock muffler, and I’d love to know what you’re running.
A 150cc kart like that would make a cool shifter kart
Love watching your shows you guys are very helpful for stuff with small engines I have a 1972 Terra jet what type of mortar should I go with
Clay is good mortar
Love the videos, keep up the good work. What's up with the red/orange minibike sitting off by its self in the vegetation at the back of your trail?
Bought it at the junk yard just needs built
I just bought an used TrailMaster 150xrx. And my brakes suck. I’m going to try bleeding mine tomorrow! This video help me with that.
Badass
If you fit a snorkel or extension to the intake to get it a bit further away from the wheels and ground, it may draw in less dust and mud into the air filter
Bro I have old kazuma 150cc go cart and requesting if you can make a video how to do the complete wire harness guide installation including the lights ?
Thank you
Great video!, real skillfull guy!
My question: What is the "must-do-mods" on this motor, for maximum power/cheapest.
Hey guys, Just a heads up. Those Prima tuning weights yall are running are just for temporary use to find out what weights work best. Once yall find out what weight works best, you will want to replace them with permanent rollers.
I can't find your video about custom wiring for the 212 but can I just trim that little knob off the spark plug wire.... if I can locate it where I want I won't have to move the motor to change the carb when I change it out
I've got a 2006 Dazon Raider 150cc that has been a good go-kart. Where I live it is about 2500 ft elevation but I would like to use it up north at 9000 ft elevation. Any idea what carb jet should be used? Thanks!
Sounds like moma liked it
150cc kart 👍
It's crazy how a 150 cc engine on a go-kart is way slower than a 150cc engine on a dirt bike
Awesome videos as always.
What's up with that orange yellowish mini bike in the back yard trail.
Same question
Do you know if it is possible to add a Pull Start to a GY6 150cc Buggy?
So on my Baja Dune 150 , I put new crab on , cleaned gas tank , new gas , and CDI , plug and wire . Now it starts up amazing , idles great and when I hit the gas it barely moves a foot and dies . When I jack up the rear end the tires spin awesome but down and load on it doesn't go . Any suggestions boss
You ever going to do a video on super scoot 2.0 like said months ago ???? Wanna know how that rear end worked out also did it work like poise and both wheel spin or hook up when straight and then when you turn did the one wheel let go and it turns ??Or does it still push ????Peace
I love the United States for these things 🇨🇷🇨🇷🙏🏻🙏🏻✈️
Hello if I made a 2 speed gear box with neutral would I still need a centrifugal clutch.
Also what gear ratio would you recommend for 2 speed gear box with a 16hp 420cc petrol 6000rpm. It’s going to be a racing go kart so probably 6inch wheels.
Thanks
you still need a way to release the engines output shaft from turning the gearbox so you can shift, so probably.
Frigglebiscuit thanks
Just a question, if you remove that screw behind your gas pedal will it go faster or isn't it a good idea??
I have a aws carbide buggy that blows black smoke and falls of its face at top end, what jets should I get for it?
I have a sunl 150 and I'm having a hard time finding parts for it. Could you tell me where i can get a complete brake setup from master cylinder to All 4wheels
What are the measurements of the Shipping container that MegaMoto Pro comes in ?
I need to know if it will fit in my truck with the cap on it.
Liked/Subscribed
If my intake is not sealing to the head properly, will that be the cause of my super lean condition?
hey i got the same go kart but it wont stay running unless were turning the key to start it then its seems fine, but when we stop tryn to turn the key to start it dies out. got any clue to why this is. we just cleaned the carb jets.
Hey I've got that same go kart same brand and everything what did you do with the vacuum Line into the stock airbox into the valve cover I left mine unplugged and it started blowing out smoke and a little oil
I dont think thats a vacuum line. Should be a crankcase vent commonly called a pcv valve on a car. It runs into the airbox and is burned in the engine as a way to keep from polluting to open air. It wont harm anything disconnected. Just vent it away from you and above where you expect water to reach
Do you have a video on tuning the stock carb?
Can you make video of just tune 22mm Mikuni carburetor to make sure you get most out of it an what each screw on the carb does
Use DRY foam and paper air filters so you can just knock the dust off and keep going.
Hey man so I put a newcarb on and stuff it started up ran but has no brakes 😂 but when I push on the gas it like won’t engage in gear really and go foward you kinda have to feather it but I needed someone to push me to get it shifted and when ur driving it like won’t shift to go faster and ideas why please let me know
I’m very interested in this info.
It sounded really peppy for such a small displacement.
Lot of power with all that weight for a 150cc. Then again those gy6 motors don't play.
I have some questions on carburetor tuning on a 150 cc can you help me please
You could have used the new caliper. They stopped making the factory one. Now the one with the built in parking brake is the replacement.
YOU SAY OIL THE SAME WAY I DO...WE COUNTRY...IM PROUD...LOL
I doubt you're going to see this but the zircon 150cc go kart I bought for my daughter just started spouting white smoke out the exhaust could it be the sparkplug or the valve maybe?
Could be coolant as well
24mm? Back in my gy6 scooter drag racing days we use 28mm in stock bore gy6s and 30mm and up for big bore ones.
7:55 is that the Honda Odyssey?
Mr Redbeard PLEASE HELP!!! so I have a BRAND NEW 16 hp duromax I got (thanx to u sir & ur code) BUT never been started, CUZ IT simply WONT lol. Has spark,obviously comp., good fuel,plenty oil (so not thinking low oil sensor) fuel in bowl of carb, but absolutely refuses to start, tried key start til I killed battery & tried pull start til I bout threw my arm out.even tried starting fluid. Man I am stumped. May take apart carp & inspect? Idk really need help. Just got 40 series TAV so thinking were G2G & can ride now finally & the 🤬thing won't fire up.bummed out man
Did you change your throttle cable
what that tool he uses for putting in studs
What battery should I use for this
Can anyone help me with my go cart? it works but i gotta hold the throttle cable to a sertan spot for it to work and if i let go of it it just stops so anyone got advice for me to fix it?
What kind of intake you using
Had a general question I have a duromax7hp engine that I just put a stage 1 kit on from go power sports I changed the jet and installed air filter and header but its running ruff anyone else had this issue
has anybody ever extended the pedals to allow for more leg room?
Pequeños detalles
Redbeard you probably wont see this but i would love to see the shifter Cart back
Actually working on it next week sir and getting it on the road
He saw it
Hey brother I am having issues with mine and I can't figure it out !!! Any help would be awesome. So I have the dongfang 150cc go kart it bogs when u try to take off after it gets going it does good until u try to take off again. I put a brand new carb on it and it still does this please helppppp lol
Did you ever figure it out I have 150cc an its spitting an sputters when taking off but idles fine sorry your comment is a yr old but maybe you figure it out lol
You should make a belly tank gocart. For top speed.no one else has built one
Where I work on base I see small ones.
Did I miss the carb tuning?
Hey I just got a go kart it's a 212cc and the gearing isn't right its 12 tooth on the cluch and 48 on the rear with 18inch tires. What do u think would be a better setup I would 12 72 be good
Romen Rolls are you looking for power or speed
@@reesetrescott3731 thanks for replying but I already figured this out it was 7 months ago but thanks
No problem
Tienes buggys en venta ??
What muffler you running
Why am I not getting notifications ? I'm subbed the bell is ring ? Maybe ring it again.
I thought that an oiled filter makes the engine run rich. I thought more air leans and less air richens. I've been doing wrong.
Ok so posting a comment on a 2 year old video but I need a bit of help. I just got into all of this go kart life with a kandi kd-150fs. The shifter is funky and dosent go into Rev or forward depending if it is in the opposite gear. You have to pump the throttle to get the shifter to slam into gear. The issue is that this is an integrated reverse gear and not the external one. I have a video and will post it. Just wondering if you've seen this and if a cable replacement will fix it.
You ever solve this?
I’m surprised it’s not faster
Do you have coupon code for go power sports i need 40 series torque converter kit for 11.5 Kawasaki engine on a yerf dog 3202
They don't do the discount codes any more.
@@RedBeardsGarage oh well rhanks for the reply love ur builds would u recommend a cheaper kit for my build the engine is Kawasaki 11.5 has 1inch shaft thanks
@@RedBeardsGarage or if u have a used kit for sale id buy it
@@RedBeardsGarage its a fe 350 kawaski what would be best rpm engagement with 40 series
I would like to bargain with you. What would you sell for
Second
Oowl lol oil
potato
HELP⏬📩👇
Love the videos, but it’s pronounced OIL not awwwl.
Junk
Where’s the god damn IRS Buggy 🤦🏼♂️
I got a video filmed and parts should be done at the machine shop. Trust me its frustrating for us waiting on parts to finish something
Red Beard's Garage can’t wait it looks soooo damn cool already 👍🏻
Bro, language...chill
ey broo you no the Westside name goo carats parts???