Look, let me say this. I’ve been looking for someone to actually tell me EXACTLY what you did. I’ve taken my Coleman BT200X completely apart and back together again. Done everything you can do to keep it going. Down to the carb. It would take off right from jump street and I knew the carb I bought needed adjusting. I just didn’t know what to do. Man you did that for me. Much appreciated.
The rule of thumb on these carbs are, turn the screws completely to seat, screw out 1 1/4 turn. That should give you a good starting point on getting it started, then tweak it afterwards according to the engine you are running
Im trying to find out how to fix my sons mini bike and came across this video. I don't know much about carburetor but you helped me understand. Thanks. Ill try to tune his bike and see if it works.
Nov. '24 and I like your approach to explaining all of it. When you said put it against the wall just in case...lmao. you shouldn't have to apologize for not being a pro but I understand. I work on all sorts of things and suck at explaining sht
This is actually one of the most useful tutorials I’ve found… just the fact that you show the different sounds and reason for those sounds helped me identify my problem
Pwk carbs and carbs with screw before the intake have air fuel screw, turning in richens the circuit brother. VM22 carbs have a fuel screw which turning in leans and out rich.
As soon as my new valve springs come in I’m gonna ditch the stock carb and exhaust governor and oil sensor for a Mikuni carb and a header just want to do it all at once so I can ride. Gonna do my daughters 3hp doodle bug right after. Still gotta order her parts though
Yo I just bought my first GTS mini bike it’s a 5” with a fat go kart tire as a rear last Friday it needs a little adjustment but it’s a solid bike with a hemi 212cc
Im new lil homie... I haven't figured mine out yet. I have a massimo warrior 200cc however i may be doing it wrong. However this video got me half-way i get it just aint did it lmao. Thanks
I cant seem to get a steady idle on my bike. It goes high idle, to lower idle. Also it wants to die out after letting go of the throttle and spews black carbon
How did u adjust it? I have a vm22 carb I keep trying to adjust mine but nothing seems to work & the bike only runs when the choke is on & it just wants to take off
Thanks you helped me with my Coleman ct200u I got a mikuni on it and used to takeoff but I fixed it and just needed to do the air mission and now it’s not starting at all 🤷♂️ 😂
I have a fully built motor and the carb dies out when I full throttle it it has a billet flywheel arc rod and piston 26lb springs champion rockers chromoly pushrods 265 cam and a maikuni 28 carb
Im having an issue with my new monster moto mini bike it currently has a 212 predator engine and if I cruise around 25-40mph I don’t have any problems but when I hit higher speeds from 45-60mph whenever I come to a complete stop the engine just slowly dies out and turns off. I’m not sure what the problem could be but if I were to take a guess it’s probably the idle. I’m not sure tho. If you have any thoughts on what it could be please let me know.
Float bowl hight..when cruising at the lower speeds it isn't emptying the gas bowl at the bottom of your carb and then when you go full throttle its enough to just about empty the gas bowl, so readjust your floats in the gas bowl, or look into getting a pulse pump.. (You might have already fixed your problem, I just realized that you left your comment 8months ago and I'm suuuper late to the party LoL...)
my minibike throttle has no snap back, so when i use the throttle and i go, if i let go of the throttle it won’t stop, it also has started to take off on me when i pull start it. It also needs to be given gas by me turning the throttle all the way in order for it to start, if i don’t then it will not start running. I have no idea how to fix this, will this solve my issue? Or do u have any idea for how i can fix this
you doing alright I use to build minibikes. started when i was about 10 till i got a license for a car. I gathered peoples snow blowers on yearly pick up day. I would mix carbs with motors turning 3 def motors so i could rid my frame all summer. You are right listen to the bike it will tell you how to.
whats up jz, i gotta question boumy bike. my predator 212 when i try to cold start only starts on choke and dies immediately but with no choke doesnt have a response. Do you know whats wrong?
Clean the carburetor change the spark plug if u did that our spark plug is new turn your mixture all the way in and then turn it 2 turn out and turn idle up high should start from there then just liston to where u think it runs good will probably have to just the idle and mixture just a little if it's somthing that happen all the sudden then most likely u got a leak our somthing going on
Well, I can see you don't know the difference between air screw & Fuel screw lol. They are definitely different. That VM is Fuel, the Adjustment is on the fuel side. Air screws are on the intake side.
I’m here in 2024 gang and you still helping us out 💯💯😎
Otr my bike trippin gotta watch this again too see if it's gonna help 😂
Fr
“You know how when someone has asthma..” 💀💀💀 you killin me bro. great video.
THATS WHAT IM SAYING LMAO. I’ve never been this entertained while watching a tutorial video
O
Look, let me say this. I’ve been looking for someone to actually tell me EXACTLY what you did. I’ve taken my Coleman BT200X completely apart and back together again. Done everything you can do to keep it going. Down to the carb. It would take off right from jump street and I knew the carb I bought needed adjusting. I just didn’t know what to do. Man you did that for me. Much appreciated.
How did you tune it
You talk like I wanna hear it bruh, ain’t no crazy fancy shit. This raw and real. I fuck with it.
The rule of thumb on these carbs are, turn the screws completely to seat, screw out 1 1/4 turn. That should give you a good starting point on getting it started, then tweak it afterwards according to the engine you are running
Im trying to find out how to fix my sons mini bike and came across this video. I don't know much about carburetor but you helped me understand. Thanks. Ill try to tune his bike and see if it works.
Thanks a lot man I didn’t even know you could tune the carb. Saved me a bunch of time!
man I'm glad you drop this one. hell i almost gave up lol
Yea me too I had gave up going to go try again
Nov. '24 and I like your approach to explaining all of it. When you said put it against the wall just in case...lmao. you shouldn't have to apologize for not being a pro but I understand. I work on all sorts of things and suck at explaining sht
This is actually one of the most useful tutorials I’ve found… just the fact that you show the different sounds and reason for those sounds helped me identify my problem
I'm very impressed by this young man.
You you for posting videos like this they teach me things love the channel keep it up
Good video. Helped me understand more of wtf going on with my motor
Pwk carbs and carbs with screw before the intake have air fuel screw, turning in richens the circuit brother. VM22 carbs have a fuel screw which turning in leans and out rich.
As soon as my new valve springs come in I’m gonna ditch the stock carb and exhaust governor and oil sensor for a Mikuni carb and a header just want to do it all at once so I can ride. Gonna do my daughters 3hp doodle bug right after. Still gotta order her parts though
dont cheap out on the carb its the worst thing you can do
@@kbeezyyyy_5069 I do. The last VM22 clone carb kit I bought was $20 on Amazon. Works just fine after tuning.
What size jets are you running in that red & black flat slide carb that you have on that minibike in the video
I really appreciate you my boy thanks a lot keep up the great work 🎉
Yo I just bought my first GTS mini bike it’s a 5” with a fat go kart tire as a rear last Friday it needs a little adjustment but it’s a solid bike with a hemi 212cc
i fw your videos bro got me predator 224 onna ct200 learning how to tune this mf carb this vid helped a lot.
Im new lil homie... I haven't figured mine out yet. I have a massimo warrior 200cc however i may be doing it wrong. However this video got me half-way i get it just aint did it lmao. Thanks
fire video brother helps a lot
Decel back fire what does that mean like what I need to change
Good tip royal jz ‼️😎👍🏽
I cant seem to get a steady idle on my bike. It goes high idle, to lower idle. Also it wants to die out after letting go of the throttle and spews black carbon
Make an updated video of this for newbees
yo thank you bro my bike would just bog out when i first put gas until it like half throttled helped a lot thank you
This video jus saved my life bro goodlookin out
On my new vm22 all I have is a pipe it won’t start but I haven’t changed out the jet or anything
What jets do you use on a pwk flatside for methanol
How did u adjust it? I have a vm22 carb I keep trying to adjust mine but nothing seems to work & the bike only runs when the choke is on & it just wants to take off
th-cam.com/video/m1skFNpohCI/w-d-xo.htmlsi=BekBQQaypPVrUHQs
It's for the vm22 carb
Do you have a flywheel or champion rockers?? Just curious bro
Just flywheel and rod
Do you k ow why my carb keep overdilling since I changed my gas tank from sticking tank. Weird
you did a good job
You got my sub bro
What is the carb you have installed on called?
Great video
Thanks bro everything worked out
Thanks you helped me with my Coleman ct200u I got a mikuni on it and used to takeoff but I fixed it and just needed to do the air mission and now it’s not starting at all 🤷♂️ 😂
I’m having the same issue did you fix it?
Hey man I have a question. I installed a Bigger Air filter on my RT100 mini bike and now it will start for 2 seconds and turn off any clue why??
I have a fully built motor and the carb dies out when I full throttle it it has a billet flywheel arc rod and piston 26lb springs champion rockers chromoly pushrods 265 cam and a maikuni 28 carb
Im having an issue with my new monster moto mini bike it currently has a 212 predator engine and if I cruise around 25-40mph I don’t have any problems but when I hit higher speeds from 45-60mph whenever I come to a complete stop the engine just slowly dies out and turns off. I’m not sure what the problem could be but if I were to take a guess it’s probably the idle. I’m not sure tho. If you have any thoughts on what it could be please let me know.
I’m having this same damn problem ever fix it ??
Same problem here, I was told it was the carburetor so I’m gonna clean it out and give it a try.
Float bowl hight..when cruising at the lower speeds it isn't emptying the gas bowl at the bottom of your carb and then when you go full throttle its enough to just about empty the gas bowl, so readjust your floats in the gas bowl, or look into getting a pulse pump..
(You might have already fixed your problem, I just realized that you left your comment 8months ago and I'm suuuper late to the party LoL...)
"I ain't a professional so I can't explain it" bro you explained like a homie would. Not a professional that you're like.... what did he just say lol
what kind of gas u run?
Where you order that 28pwk from
Thanks G!
I messed with the idle screw on a pz27 carb and now my bike won't start do you know why 🤷♂️
idle prolly too low
Amen thank you for this gonna fox my bike tomorow much appreciated bro
Thanks fam good clip💪🏾
Whats ur average rpm?
my minibike throttle has no snap back, so when i use the throttle and i go, if i let go of the throttle it won’t stop, it also has started to take off on me when i pull start it. It also needs to be given gas by me turning the throttle all the way in order for it to start, if i don’t then it will not start running. I have no idea how to fix this, will this solve my issue? Or do u have any idea for how i can fix this
If it's stock, add another or new return spring
Where u get your gas tank from
Is the choke suppose to be up or down when running ???
Down
I appreciate the help
you doing alright I use to build minibikes. started when i was about 10 till i got a license for a car. I gathered peoples snow blowers on yearly pick up day. I would mix carbs with motors turning 3 def motors so i could rid my frame all summer. You are right listen to the bike it will tell you how to.
Bro please help I can’t get it to even idle
Set air mixture first to highest rpm. Then idle.
What do you set the idle screw before you do air screw
Thank you bro!!!
My minibike takes off when I give little throttle and I don't know why it's happening
Bro my bike dies if i give it full throttle ?? Pleas help
I just put a new carburetor on my son 50 cc hawk x pro dirt bike it keep cutting off I tune it stays on soon as you go up the block cut off
Jetting is not right or check for air leaks
whats up jz, i gotta question boumy bike. my predator 212 when i try to cold start only starts on choke and dies immediately but with no choke doesnt have a response. Do you know whats wrong?
If it’s a stock carburetor you have to move the choke lever side to side to find a good spot where the bike wants to start
@@RoyalJZ I have a 22m mikuni
@@rhettbeluevlogs9635 I mess with the idle or check for air leaks
Clean the carburetor change the spark plug if u did that our spark plug is new turn your mixture all the way in and then turn it 2 turn out and turn idle up high should start from there then just liston to where u think it runs good will probably have to just the idle and mixture just a little if it's somthing that happen all the sudden then most likely u got a leak our somthing going on
@@rhettbeluevlogs9635 I have a 15 pilot jet and a 120 main jet needle clip in the middle.. air mix screw 1.5 turns out from lightly seated
What position is your needle at ?
Idk
my stuff is going by itself
Bad gasket or idle to high or clutch
@@RoyalJZ how to turn idel down?
i just put it on brand new
@@Deonn.1 show be a screw on the side of the carburetor
@RoyalJZ what screw on the side?
Why does my bike give gas as soon as i turn it on w out any throttle conected
🔥bro
And why does my bike cut off if I don't keep giving it gas with the throttle
idle
My bike goes by itself when i pull the recoil starter after installing the vm22 mikuni card
To much idle.
Good video
🔥🔥🔥🔥🔥
I have had gas running out the crab?? even while it's off
Is the float stuck
Wherevcan I get that gas tank
On eBay
@@RoyalJZ thank ya
My carborator doesn’t start and it has compression in the engine
New drinking game: every time that he says "fittin to" or "you feel me" take a shot. No one has made it past the first minute. 😂
My bike takes off when i start it im new
What size jets are you running on the pwk carb
??
?
When i take off the motor shakes real bad
💯🔥🔥
Electric bike taking over🚲🥶🥶
That screw controls air not fuel.. if it's on the other side it's fuel
Good jop
Well, I can see you don't know the difference between air screw & Fuel screw lol. They are definitely different. That VM is Fuel, the Adjustment is on the fuel side. Air screws are on the intake side.
first
Why won’t my bike stay on after changing the idle