I Admire His Efforts to Make A New Knife After Failing From The First One. Some Times You Have To Stay Calm In This Situation.I Was Also Fail During Restoring A 20 Year Old Exhaust Fan,When I Dissolve The Main Wings Alumunium Part In The Acid To Clean it, And It Got Dissappear. So I Appreciate Your Hard Work Man. You Tried Your Best. Really Amazing Brother Enjoyed Alot. Hope You Also Enjoy During Making it.
Great video, i love how you incorporate every single step even if the step sometimes results in something breaking it shows that even the best of us make mistakes sometimes. All my respect goes out too you and keep on doing these videos👍
Sir you have made two of the most beautiful Fairbairn Sykes knives I have ever seen! Thank you for showing me your skills both metalwork and gardening.
It's good to hear one of you Forging giys say you your going to re-use fillings and cut offs again. Instead of wasting it. Also cool looking knife. Maybe you could make it Commando knife for your next project. Just a suggestions from one of your subscriber's. Love from Australia 🇦🇺🇦🇺❤❤
I like how you show the failures as well as the successes. Many people don’t realize that this stuff is not fail safe, but an art form as much as a science. 👍🏻
Absolutely gorgeous. My grandfather had one of these in the war. Could've done without the descriptions of their use but they did lead to an in-joke with my dad about Pez Dispensers.
@@johnfitzgeraldkennedy7947 So the typical "Stealth Execution" method you see in the movies/games has the stabber cover the stabbee's mouth and then a tiny slice across the neck. This leaves the target bleeding out and possibly able to warn their compatriots. *WARNING BELOW FOR GORY DESCRIPTIONS.* In reality the technique taught was to stab once in the area of the kidneys (some were taught to move the knife around) to make the stabbee inhale sharply, then the mouth is covered, (this is the gory bit) the point of the knife is pushed in through the side of the neck then pushed forward and out, killing the person quickly and/or rendering them unable to raise an alarm. If you've ever seen the film Upgrade; the reverse of what happens to Serk with the knife. A TVTropes entry for Slashed Throat, talking about the film Logan said one of the Mooks was turned into a bloody PEZ dispenser. My dad took that phrase and coined the verb; ImPEZerration.
Już sam proces tworzenia ogląda się po prostu dobrze, to uspokajające. Oczywiście efekt końcowy jest niesamowity! to tak jakby rozłupać stary orzech i odkryć w środku złoto! 👏🗡
It is possible to forge perfectly good blades without all of that but you are correct, I find myself disheartened at times when I see the imposing studios of some smiths.
You are really perfecting your craft. I've been watching before you got the tools to help make it easier. You always were fun to watch and I still enjoy your work. Great job.
I love it when you are like THIS IS A RUSTED PIECE OF METAL AND IM GONNA TURN IT INTO SOMETHING NICER:DDDDD. 5 seconds later: HERES A RESULT IF WHAT WEVE MADE.
Awesome creativity and video editing as usual...let me ask you one thing mia, when you are planning to reveal yourself on the face cam, because the world wants to see the god of creating such beautiful creation from their naked eyes bro.. 🤩😁🤗❤️...much love and huge respect from India
When i saw the crack in the blade I was like "oh sh*t" and then when I saw the blade fall I was like "OH SH*T". It was so sad I know that making those takes allot of time and it always sucks when something you made brakes.
I really love watching the work done by Random Hands. Your work is spectacular. The completion of each piece is done with great attention, care and professionalism. Congratulations!!! Eu realmente adoro assistir os trabalhos realizados pelo Random Hands. Seu trabalho é espetacular. A finalização de cada peça é feita com muita atenção, cuidado e profissionalismo. Parabéns!!!
Wow masha allah very nice work. I love that even when you made a mistake you still showed us. As perfect as the end result is , it shows that none of us are perfect. Well done 👏
This man has proved everyone that he can entertain anyone without using derogatory words love you work❤️❤️subah subah apka vlog dekhakar achha lagta hai,,❣️❤️
I Admire His Efforts to Make A New Knife After Failing From The First One. Some Times You Have To Stay Calm In This Situation.I Was Also Fail During Restoring A 20 Year Old Exhaust Fan,When I Dissolve The Main Wings Alumunium Part In The Acid To Clean it, And It Got Dissappear. So I Appreciate Your Hard Work Man. You Tried Your Best. Really Amazing Brother Enjoyed Alot. Hope You Also Enjoy During Making it.
He is an artist actually
5:38 Heart broken moment 💔🥺
So much hard work & patience required 😔
😥❤️
5:31 moment of the accident 😢
Great video, i love how you incorporate every single step even if the step sometimes results in something breaking it shows that even the best of us make mistakes sometimes. All my respect goes out too you and keep on doing these videos👍
Thanks a lot
@@RandomHands BRO PLEASE PROMOTE ME ALLAH PROMISE IAM VERY POOR PLEASE MAY ALLAH SUCESS YOU IN EVERY FIELD OF YOUR LIFE AMEEN 🥺
LOVE FROM PAKISTAN ❤️
@@RandomHands
هل يمكنني الحصول على عنوانك او رقم هاتفك
@@RandomHands
Can I have your address or phone number
@@montykarlo5926 no wtf
Sir you have made two of the most beautiful Fairbairn Sykes knives I have ever seen! Thank you for showing me your skills both metalwork and gardening.
It takes great strength to achieve victories, but it takes greater strength to accept your loses. Respect.
Great work, your abilities to see a design and bring it out of the raw material is amazing. Keep up the great work.
It's good to hear one of you Forging giys say you your going to re-use fillings and cut offs again. Instead of wasting it.
Also cool looking knife. Maybe you could make it Commando knife for your next project. Just a suggestions from one of your subscriber's.
Love from Australia 🇦🇺🇦🇺❤❤
I kinda like it. You can make anything out of old merchandise like steel. That's what it is in the real world
I like how you show the failures as well as the successes.
Many people don’t realize that this stuff is not fail safe, but an art form as much as a science. 👍🏻
The gardening scene killed me lol ,
Your work sir absolutely Amazing learning from you and getting Real results , Thank you
Your work is absolutely gorgeous. Have you ever thought about going on forged in fire?
he probably needs to for to America for that
He doesn’t actually forge things, he makes a general shape then cuts it out. He is a human plasma cutter
I hate to say it but never ask a knife maker that, we get asked that more than any other question and for some people it’s really annoying
Beautiful work as always my friend!
@@Drew_lininger I'll stop
When what used to be a rusty bearing gets the mirror finish---that's magical.
His creations are so satisfying
All his creations are blessings
So THAT'S why new videos take a while to complete. Thanks for spending time to get a perfect result :)
That's Bada**!! Every Commando should have at least 1 of those!! Well done...
Absolutely gorgeous. My grandfather had one of these in the war. Could've done without the descriptions of their use but they did lead to an in-joke with my dad about Pez Dispensers.
Gila pisaunya pasti tajam
@@kanguwan572 Indonesia 🇮🇩 hadir disini
what was the joke bro
@@johnfitzgeraldkennedy7947 So the typical "Stealth Execution" method you see in the movies/games has the stabber cover the stabbee's mouth and then a tiny slice across the neck. This leaves the target bleeding out and possibly able to warn their compatriots.
*WARNING BELOW FOR GORY DESCRIPTIONS.*
In reality the technique taught was to stab once in the area of the kidneys (some were taught to move the knife around) to make the stabbee inhale sharply, then the mouth is covered, (this is the gory bit) the point of the knife is pushed in through the side of the neck then pushed forward and out, killing the person quickly and/or rendering them unable to raise an alarm.
If you've ever seen the film Upgrade; the reverse of what happens to Serk with the knife. A TVTropes entry for Slashed Throat, talking about the film Logan said one of the Mooks was turned into a bloody PEZ dispenser.
My dad took that phrase and coined the verb; ImPEZerration.
@@Baggytrousers27 that is genuinely hilarious, im gonna use that at school
Beautiful work. Would love to see a sequel making a mini dagger out of the inner bearing track. Would be an heirloom set for sure.
Już sam proces tworzenia ogląda się po prostu dobrze, to uspokajające. Oczywiście efekt końcowy jest niesamowity! to tak jakby rozłupać stary orzech i odkryć w środku złoto! 👏🗡
Some of the machinery he is using must cost thousands of dollars. Beautiful work but for a beginner I'm not sure I can learn much.
It is possible to forge perfectly good blades without all of that but you are correct, I find myself disheartened at times when I see the imposing studios of some smiths.
When he first started he didnt have all this machinery and he could still make good pieces
You are really perfecting your craft. I've been watching before you got the tools to help make it easier. You always were fun to watch and I still enjoy your work. Great job.
Anyone who dares to rob him is going to have so many weapons to run from 😆
Superb craftsmanship! I really admire your talent and skills. Best wishes from Australia.
P
Lp
good
From au as well lol
Love from a lot Australians including myself
This guy has some serious perseverance
This guy efforts are priceless 👏
This channel is better than Men at arms back in the day
The shape of the Fairbairn Sykes is one of my all time favorites. Beautiful craftsmanship here.
Gila pisaunya pasti tajam
I think he will win in every forged in fire competition, bro, that is amazing
How will you keep it from getting rusty?
More than what can be described, an unparalleled astonishment in literature
I love it when you are like THIS IS A RUSTED PIECE OF METAL AND IM GONNA TURN IT INTO SOMETHING NICER:DDDDD. 5 seconds later: HERES A RESULT IF WHAT WEVE MADE.
Rumors say, he once was the one who forged Thors Hammer.
I may be late to the party but....what do you do with the items you craft? Do you sell them?
You know I just want to say how satisfying it is to watch your videos I legit found you yesterday and now I'm just in bliss ☺️ 11/10
Your the first crafts man I see that shows that he also fails from time to time! Thats great!
When Random Hands uploads, you know it's going to be a banger!
Прекрасный кинжал! Когда первая вариация разбилась об пол - восхищен был честностью автора. Спасибо за видео!
You must have been Blacksmith in your Previous life!!👍👍
You have no worries of danger from criminals from all these weapons you have made. I will never stop 👀 your videos
Incredible work, especially the casting. Awesome to watch.👍👀
Show brother 🤜🏽🤛🏽
You can see into Infinity in that blade! That's an astounding knife!
Hi can you buy this type of knife
The quality of the videos that I can't get enough of 🙂
Ramadan Mubarak btw bro, dagger looks amazing
It's so beautiful! Great skill and craftsmanship!!😁😀⚒️🛠️🔧👍
Dude, your work is top class
I'm addicted to your videos now btw there is nothing cuter than a man who likes to garden
Just one word "Perfect"
Получилось настоящее произведение искусства 👍🏻
Lets Invade Ukraine once and for all.
As someone who has lots of scraps laying around, this has inspired me to start trying to forge my own blades.
BITES ZA DASTO
I just love how you turn something ugly into something beautiful. Great channel.
Awesome creativity and video editing as usual...let me ask you one thing mia, when you are planning to reveal yourself on the face cam, because the world wants to see the god of creating such beautiful creation from their naked eyes bro.. 🤩😁🤗❤️...much love and huge respect from India
This is amazing!
When i saw the crack in the blade I was like "oh sh*t" and then when I saw the blade fall I was like "OH SH*T". It was so sad I know that making those takes allot of time and it always sucks when something you made brakes.
That knife design is responsible for some of the most brutally efficient murders the world's never seen.
Every single video we see you using a new tool or machine and everyday we watch ur videos becuase ur talent is really great
Great carftmanship
You can go in forged fire because you are very talented
Best wishes from Pakistan
@@Ahmed_Abid Pakistan zindabad
Amazing as always and I might have to get into black smithing myself cause you my friend are cut great physique
You are really funny :D
I want to be like him. Have a badass profession but also have time for flowers.
Amazing!! 😁😁😁😁👍👍👍🤘🤘🤘👏👏👏😊😊
That's actually SOOOO clean
MAGNIFICENT PIECES you should be very happy And proud of your BEAUTIFUL work. THANK you for the videos.
What about Loki’s dager from Thor: The Dark World? Would have been awesome of you could make it!
WoW! Beautiful, nice work keep it up!
Thanks
I really love watching the work done by Random Hands. Your work is spectacular. The completion of each piece is done with great attention, care and professionalism. Congratulations!!!
Eu realmente adoro assistir os trabalhos realizados pelo Random Hands. Seu trabalho é espetacular. A finalização de cada peça é feita com muita atenção, cuidado e profissionalismo. Parabéns!!!
Excellent video my friend.
With mistake included.
You are the best 👏🏻👏🏻👏🏻👏🏻👏🏻
Greetings from Argentina 🇦🇷🖐🏻💪🏻
Here's an idea. What if you made Moon Knights crescent darts?
Wow masha allah very nice work. I love that even when you made a mistake you still showed us. As perfect as the end result is , it shows that none of us are perfect. Well done 👏
👏👏👏🔥🔥🔥great job man. 😊👨🏭
Хэй админ, почему по бутылкам не бил? Я ждал очень, как в прошлых видео, не забывай об этом, это очень интересно и важно. Спасибо.
Комментарий в поддержку канала и ролика, а также труда мастера.
Wow !! Thank you so very much for sharing this wonderful Video.
Great job you are really good at making rusty objects into weapons
انت مبدع اشاهدك من العراق 🇮🇶💙
I love seeing just how far you have come skill wise. These just get better and better. Keep it up
Awesome 👍😎 it's one of the most beautiful knives iv ever seen on TH-cam.
We all just appreciate the content this man and his crew makes it's just a masterpiec imagine what's he's gonna be doing the future. 😍😁.....❤
He's gonna forge tanks 😎😎
This guy owns a sword shop.
Absolutely fantastic craftsmanship
I watch these videos with my girlfriend before we go to bed. Just a way of settling down after a long day. 😁
A real work of art.
bro this guy has enough weapons to handle a zombie apocalypse
Imagine the hell forgers went through before modern equipment
This man has proved everyone that he can entertain anyone without using derogatory words love you work❤️❤️subah subah apka vlog dekhakar achha lagta hai,,❣️❤️
Absolutely Awesome 👏👏👏
Just found your channel and I can’t stop watching man , these are awesome
DUDEEE!!! NICE CRAFTMANSHIP!! SO GORGEOUS!! u should show us ur collection of knives/swords in one video
One of the finest weapons I've seen a true work of art friend your craft in the forge is amazing good work.
You are truly an artist.
Bro your work is just amazing!!
I love the way you make or restore things and I am always inspired by your work!!
You nailed it bro......!!👍
and your dagger is really cool
LEt'S we all just appreciate the content this man and his crew makes it's just a masterpiec imagine what's he's gonna doing the future 💫💙💫
The handle of the dagger Looks amazing! It Looks like a cone! 🗡🎳🥰🎆😍☺️✨️
Great video 🥰
I'd like to see you make a cuban link chain for yourself. Start with either white gold, stainless steel, silver or platinum.
Well done random hand's can wait to see more!
srry you had to begin all over again but it looked sooo cool at the end, love your work😀😀
Beautiful. Now imagine making one of these with out the fancy tools.
not much difficult just more timetaking.
So perfect, congrats for your persistence
Ц
So satisfying, releasing bearings back into the wild...
;-)
Brilliant work.