Painting an Aluminum Boat with spray paint & primer | Smokercraft Restoration.
ฝัง
- เผยแพร่เมื่อ 3 ต.ค. 2024
- Link to Boat Painting Products:
Paint Stripper Used: www.amazon.com...
Wire Wheel Used: www.amazon.com...
www.amazon.com...
Micro Fiber Cloths: www.amazon.com...
Sand Paper:
www.amazon.com...
Visit my ENTIRE STORE! www.amazon.com...
Help me become a full-time TH-camr and get perks, rewards & exclusives in the process at www.patreon.com/TBNation
Check me out on SOCIAL MEDIA on these other platforms:
_______________________________________________
Check me out on Instagram:
@tinyboats731
@Toadville_Customs
________________________________________________
Find us on Facebook - Search:
-Tiny boat nation
-Tiny Boats
______________________________________________
Music:
From TH-cam Free Creator Library.
______________________________________________
Recommended Channels:
Fireant Fishing
JDS Outdoors
Decked Out Jon Boats
Captain Willy's fishing adventures
Jar-Mouth ADDicT
/ @crushedemtb
________________________________________________
Disclaimer: I am not a professional fabricator or builder.
I put out concepts for people to view.
Modify your boat at your own risk.
UPDATE: Michael, first I want to say thank you for you videos.
I am about to start stripping paint on my late grandfather's 1968 Lonestar 16' semi-v bottom. I will start tomorrow. Im using Aircraft Remover paint stripper. My uncle painted it with latex paint with no primer. Its peeling and should remove very easily.
UPDATE: I purchased a 3200psi pressure washer and it peels the paint right off. Some areas need more help with Aircraft Remover in some areas and a wire wheel in more stubborn areas but the paint as of today has been completely stripped. Tomorrow I'll polish the aluminum and get it ready for primer and paint after a wipe down with denatured alcohol. Thanks for the videos. They've helped all through the process.
Only tip to add from 20 plus years of painting autobody and heavy equipment don't spray in the sun you will see way better results. Awesome diy video! good job!!!! nice to see people getting after it and not talking about it !
Bought a ‘89 12ft Sears Gamefisher aluminum boat a couple weeks ago and saw this video. Did exactly what you did and it came out great! Now just need some decals and upgrade the Gamefisher 5hp engine to something a little bigger. Great video!
I just got a boat like this thanks for the step by step looking forward to restoring mine
Hi. Nice to find your channel. I have a 1989 blue fin sportsman 1700 that I have repowered with a 1987 Yamaha 70. I am in the process of redoing the floor, wiring, and carpet. I was able to get some aluminum enough to do the entire floor and support the runners too. I love that this video shows just how easy it would be for me to paint the interior of the hull sides instead of applying carpet. Thanks for the video.
Great Job! One tip for you is to use Kleen strip. I have used it on several jobs and you would be able to wipe the paint off instead of all that wire brushing.
JB WELD
I use it to fill dents and holes in aluminum boat projects. Work line any other filler. Helps to bare sand with 80 grit then apply jb weld . I buy the biggest tubes I can find for larger areas and mix in bulk where possible. Leave is a little raised. Sand down to a finish, reapply as needed.
So after a year of this paint job and no clear coat how is it holding up? I’m restore a old boat myself.
Great video. Your store is awesome! Everything needed for boat rebuild. You got me looking for a project now! Thanks
I just got a 12ft v shape looking to turn into bass boat. Love how helpful your website it.
starting restoring a old boat to go to hard to get place so i don't damage a good boat great videos very helpful
I really like the look of that black paint!
Love the videos. Just fyi: if you wet the concrete around where you're painting it will help cleanup and finish product. Good job. I'm motivated.
Might i suggest a polycarbonate stripping wheel. Not only will it SUPER easily strip but surface preps the metal for paint. Im a metal fab guy and thats all i use. Will remove all rust way better than wire wheels. Cheers!
Michael your videos have been very helpful. I started to stripe my 14 ft starcraft jon boat and should be painting this weekend. Keep putting out these videos.
I just bought a 1968 14ft StarCraft seascape. Can't wait to restore it
they sell rubber decal removers (Works on drill)
at most auto body supply stores. way easier than scraping
100% can confirm.
i used the same process. Only thing i did different was self etch primer -> regular primer -> paint.
200ish miles of gravel roads and she's VERY TOUGH, aside from a few very small dings still looks flawless. But dings and scrapes are a sign of adventure anyway. a perfect flawless pristeen boat never leaves the trailer or sees water and doesn't catch any fish.
I sanded down my entire Jon boat White did down with rubbing alcohol and then primed it and then thinned out rust oleum oil base 6 years ago painted it with a roller still looks new. Then all my other Jon boat same prep except are you seahawk Jon boat paint also looks new still.
I saw on another video that someone used aerosol aircraft paint stripper as that stuff is hard as nails. I'm going to repaint my painting of an old paint job on my Starcraft. Then I'm going to be using heavy equipment/ tractor paint for it. The rattle can already has a hardener in it where the bulk paint you control the amount you add. Rustoleum has an above waterline paint that is great as well
Great job ! Been thinking of painting mine and adding some graphics too. Cheers and thanks
Bit late but I recommend epoxy primer since it is much more scratch resistant and strong as hell.
That patch looks like JB Weld.
Always use stainless steel wire brush bits on aluminum. Some wire brushes are carbon steel and will leave rust swirls on aluminum. You do nice work Mike. I like visiting Lake Havasu. Many fond memories there. Too hot for me to live there year round though.
Wire brush is only good to initially strip the paint. You must go over it with 240grit to give it the appropriate scratches to bond. Scratches from wire wheel is too smooth for proper adhesion. It seems like wire wheel is all you need to do but the bond isn't as good.
There is a product called devcon aluminum putty which is the best way to patch holes and dents in aluminum if you do not have access to a mig welder with a spool gun. I have done repairs with fiberglass putty but you have to be very tedious with the prep and understand how fiberglass works in order for it to hold up
I watched few of your vids, good information. They make soft wire wheel cups for grinder in 4in 5in ect would speed up your strip process. Did my entire v18 in about 45mins
Was it hard to keep from digging in with wire?
@@michaelbenna1089 not at all just dont do twisted wheels. The cups or straight bristles is about the best. All 19ft no problems
Looks great ML.
I'm a muralist...those index & thumbs tips (I'm sure you used both left & right) get sore after a couple cans, lol.
Tip: A cheap painting tarp under your projects. In your case, it saves the driveway from silhouette. Gd wrk!
love the videos about to buy by first boat so gearing up
All i did was power-washed the boat anything that wouldn't come off with a 4gpm Power-washer i Just did a quick wet sand I spot primed the bare spots then used a $19 Harbor freight sprayer and that was 4 years ago and its holding up.... I only commented for people who dont have the time or want to strip whole boat.. the key is to get the old paint that is not coming off a Grit for new paint to stick... This is how they paint cars as well. they dont strip them down.... I mean thats the best way dont get me wrong...... but the washer striped everything inside boat so I was able to seal and weld (using aluminum brazing sticks ) for loose rivets or to just reinforce.. all my tiny boats before i used clear roofing silicone on all seams before i decked and it worked great as well. Happy fishing
Mike great video. I prepped my boat the same way with the exception of the paint. I just used three coats of oil based paint. I am sure it won't hold up as well as a two part Automotive paint but it was a easy to apply and should be easy to maintain I hope only time will tell. Over all I am happy with how it turned out. Everyone has their opinion on how things should be done But as we learn from one another our overall product gets better and I thank you and all the other TBN builders for their skills and knowledge.
If you put an oil based house paint on an aluminium boat, the coating will crack and begin to break down quickly, and the only remedy for it is to remove it completely.
Oil based coatings are not flexible enough to flex and stay adhered to aluminium.
A two part epoxy will always outlast a single component coating, but, that said, a definite no no us oil based coatings.
Thanks for the video. I’m going to do this.
I noticed that you mentioned you used 6 cans total. Is this 3 primer and 3 regular paint? Or less primer more paint?
clear it, good job man
What kind of longevity did you see from this paint job? I just used this video to paint my boat and I was wondering how long it should last like this. Thanks!
I just wondered why you didn’t get it rhino sprayed where the bottom, silver is located. That way the rhino will let the boat run right over things, and won’t bother it.
How many cans?
Just got done painting my boat, went to apply a gloss clear coat (thought for more protection?) and it did not seem to stick at all and bubbles all over. Had good conditions and paint was fully dry, luckily I only did a small part of the boat before I realized what was happening. You did not mention a clear coat assuming you did not use one? After sanding and repainting the area it looks great again, wondering is a clear coat is necessary. Thanks
Sounds like crazing from the first layer continuing to off-gas. either 1 hour between coats, or several days. The colour had to cure completely before the clear-coat. not just dry.
Bro I think the boat looks great and great job!! Thank you for sharing. This heavy duty wire brushes you used first are for taking thick rust and paint off a tractor oops! It looks awesome put stickers over that spot👍🏻
Great video and work. You are the man! :-)
Nice video, starting on my smokercraft the same way
How many cans of primer and black spray paint did you use? I’m about to paint my boat in 2 weeks!
I have a lot of experience with that citrustrip it works better if you scrape it off after 30 min or so. If you let it completely dry it doesn't really strip crap off. Last time i went with aircraft aluminum part stripper from Walmart
@@TinyBoatNation im with you there thats the same reason why i bought it it does work good but for me required 2 almost 3 bottles to get the job done. Boat looks great regardless.
I would bet money that the repair you uncovered is JB weld.
@@TinyBoatNation If you mix it and then apply it to the hull with a putty knife it really makes a difference. Either way it is some sort of metal epoxy for sure.
found Krylon for you. looks like it is only available at Sherwin-Williams. thank you for all the info you share!!! doing my second boat.
Good video. I'm looking to paint the top 1/2 of my boat to get rid of the all the stone chips I seem to have collected from trailering.
I have a 50 year old aluminum boat. Trying to redo the bottom paint but there’s some heavy pitting that I found after sandblasting the bottom. Would you recommend that I fill the pitting with epoxy before putting on the new bottom paint?
jb weld putty would be my guess
Be honest, how bad was the over spray on the Nissan?
I'd say plenty.
I paint mine with air pressure and it came out to looks sick like new boat out of dealers
Looking good.
That repair appears to have been done by JB Weld Marine Weld Epoxy. Sorry, probably answered many times already but I don't have time to read. Nice job.
Hello, I have a brand new unused aluminum trailer that I want to last me a long time. Should I sand and paint it right now ? Or leave it alone and later a year or two sand it and paint it ?
I used a structural epoxy putty made by Marine-tex to fill in some large defects like this. It
goes on and cures like black glass but turns gray after it's sanded.
Jb weld is awesome shit on aluminum boats. Unless its major transom repair. Or major structure damage. you can use JB WELD with no worries.
Question i have a aluminum boat an im wanting to paint it what kind of surface prep is required if any ?
JB Weld?
That looks like it and it comes in marine grade.
Air craft paint remover not sure if it's still around put you spray that and the paint bubbles right off.
멋지네요
Very nice video
Awesome job. My wife boasted she's gonna tackle a fresh paint job on my 17' Lund. I'll just show her this video and she'll think twice, hahaaa.
On your drill powered wire brushes they must be stainless steel or brass when used on aluminum.
Use the fine brush
What is the most durable way to paint the bottom of an aluminum jonboat that’s been stripped down to the bare aluminum???
That paint job looked great. Keep up the good work bro.
Thank you for the video that looks awesome!
How many cans did it take brother? Looks good
Hey Michel, I was wondering how many can of spray paint this took
6
Cool mike that's how I plan on painting my 11.5!!
Ever try the rustoleum oil based roll on or brush on paint? Wonder if that would work too
Rustolium topside is supposed to work well.
Would Rustoleum Acrylic Enamel work the same? And if painting over the existing paint would I still need to use a primer?
You have to use zinc chromatic to cover aluminum or zinc coated material, it stops the oxidation. That is the light coating of material that prevents further oxidation. What you will have to do is repaint in 5 years. Also when using paint remover, don't use the "green stuff". Use the stuff that "you get cancer from it for 2 generations " Works faster and better.
you know you did good job
How many cans of self etch and how many cans of paint? I stripped paint and am ready for prime😁
Did u have to put anything on the bottom of the boat or can I leave it just bare aluminum?
Noticed you left the engine in place? did you just go around it. Did you paint the engine? or Tape any areas to make sure paint didn't get somewhere it shouldn't? Thanks for the reply
Great job
The bottom of the boat that did not get painted, did u sand it as well, and if so no rust issues
I need advice desperately I bought a Jon boat 12ft aluminum I sanded the whole thing then I sealed all the way around the boats rivets I sanded a little more than I applied six coat of can spray of 3m black under coating. I took it in the water yesterday it felt slow and drudging maybe heavier. I dont know what happen my boat has a six hundred pound wheight limit. It was so disappointing. I felt it did much better before I did any of this. Can you tell me some advice of where did I go wrong?
That repair looks like JB Weld to me. Its tough stuff.
I noticed you left the engine in place did you tape it to protect a certain area ? Did you paint the engine or just go around it? Also what about the bow? Thank for a reply
How many cans did you use.?
Looks great! I did mine pretty much the same way
How is it looking now?
Nice video bro did you use any type of clear coat
Tooken and flippened are not words.
Nice work. Like the decals.
Do you need to apply clear coat or anything else to make sure it stays on.
Do you think I could just use a sheet sander and not wire brushes?
@TinyBoatnation I have fitted a piece of checkered aluminum to the front deck of my boat 1650 mm with the bow Shape cut out to fit .. My Question is would this type of way that you have painted the outside of the boat be durable enough to walk on as it will be a casting deck
Nice job 💯 what do you think about bed liner would that work
What will happen if I just prime n paint over old paint?
Looks good, thanks for the video.
Have you ever thought about using Rustoleum Marine top coat?
So do I need to strip the paint all the way to the metal? Or can I just sand the gloss coat and pair over the existing paint?
I would strip all the way down.. It's the best way but sometimes you can get away with just scuffling the existing paint
My boat wanna make a new one pants, how can I do?
If the paint is so hard to strip off, why not sand it smooth and use etching primer and then paint it?
I just bought a 1963 16 foot Starcraft and I'm not stripping it.
@@TinyBoatNation Thanks for the reply.
Im in the process of restoring a 1956 "home made" boat. Thinking its a sea nymph. And I will be cleaning and painting soon.
That repair must be Splash Zone A-788. Or something similar to it.
What do you suggest for doing the same but for a saltwater application
@@TinyBoatNation Do you have any experience with or suggestions?
I tried this and did terrible. Love the tbNation, but I can’t use a rattle can. How would you fix? (In Minnesota, Lots of algae)
I’ve seen 2/3 videos of yours on painting aluminum boat. Which one should I follow. Willing to spend 2 or 300 bucks to paint outside and the deck.
Rolling and tipping
Hello, should I use a wire brush first even if my aluminum boat doesn’t have paint? Or should i just start with sanding?
Just use 220 grit to prep the surface
Looks good man
Aircraft stripper takes everything off. Scrapes off like slime. Minimal sanding. Especially if you want to clear coat metal.
I cant fine the krylon automotive anywhere is there something comparable to use? I was trying not to spend the money on the zinc you spoke of...
Do I need to get everything off paint wise? Everything
How many hours of labor for the whole job?