ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
LianLi Lancool 216 - Part I (Case Details)
ฝัง
- เผยแพร่เมื่อ 16 ส.ค. 2024
- This is one awesome case which is pack with features. I will like to share with you the modularity of this case.
Credits with thanks
================
Lian Li Official website - lian-li.com/
Lian Li Lancool 216- lian-li.com/pr...
Lian Li 4090 Compatible List - lian-li.com/li...
SG Gaming Community
=====================
Casual streamer having fun with friends. Building a community to have fun together! Join us in our daily epic nonsense!
TH-cam - / @kritikalgaming9331
Facebook - / kritikalgaming93
SG Affiliated PC Hub (In Singapore)
============================
Carousell www.carousell....
Shopee Online shopee.sg/cybe...
PC Pricelisting in Singapore www.cybercypher...
Time Stamp
==========
00:00 | Intro
01:01 | Elaborate on the 3 Types of cases (Non ARGB Black, ARGB Black, ARGB White)
02:22 | The exterior of this case
03:22 | The case measurements
03:51 | Removal of all pannels and etc
07:22 | The interior of the case
08:49 | The bottom of the case
10:17 | How to much GPU riser cable
12:17 | Demo vertically mounted GPU
15:27 | Mounting the motherboard at normal position
19:09 | Mounting the motherboard at upper position
12:15 | Aircooler clearance
20:35 | Top of the case (Radiator and Fans area)
21:47 | Bottom of the case (PSU ventilation area)
22:25 | Add on gadget to mount additional fan at the rear (GPU area)
22:59 | The cable management section of the case
25:07 | The bottom section, the hard disk cage and PSU area
26:19 | Front of the case (I/O, radiator and fans area)
28:41 | Elaborate on the I/O cables and I/O ports
31:05 | Mounting method for fans or radiator at the front
32:38 | Fan/argb case hub & the argb front panel controller
32:59 | Argb function and the cable connection of the argb front control panel
35:11 | Connection between the ARGB front control panel to the fan/argb case hub
36:51 | Connecting 160mm ARGB case fan to the fan/argb case hub
38:06 | ARGB illustration of the ARGB front control panel and on the 160mm ARGB case fan.
40:09 | End
Hi Everyone, my bad. for front fans. I have mentioned able to mount 3 x 140mm. is not 3 is 2 x 140mm fans. sorry.
For lancool 2 mesh also, they mention 2 x 140mm. However, we can mount 2 x 140mm with 1 x120mm easily. Also, some people have put 3 x 140mm as seen on reddit. Can you check if these configurations are possible in lancool 216?
@@taekwondosplit hello and welcome to my channel. practically it's ok to mount 2 x 140mm and 1 x 120mm at the front but will need some adjustment or maybe zig ties to do this stunt
@@KleoYan the power and reset switch in b550 am4 gigabyte ds3h compatibility cuz I don't see one plus respond
@@budgetlamp7124 I think I have replied you. thank you!
You are still making the best and most thorough case reviews on TH-cam. If somebody wants to learn about a case, inside and out, top to bottom, left and right, and front to back, then your videos are the ones to watch.
Hi Ya! War Gaming Refugee, welcome back. how are you? hope you are doing fine at your end. Thank you for the valuable feedback, your kinds words and appreciation does have an impact on me. You have no idea how happy I am about your comment. This motivates me even further, I am not perfect but will try to improve as I continue on. By the way if you have any suggestions for me to improve on, do not hesitate to suggest or comment. I am open to suggestion.
To be honest, when I started this channel, I was worried as I do it at my comfort zone (no studio, no good cameras). you might be shock, all these while am only using a smart phone to take those videos. Nevertheless I am standing as a PC builder stand point, I want to know what's good or bad of a product before purchasing. Be it if further products are sponsored, I will stick to my principle. If it's bad, I will say it's bad. If it's good, I will praise and state why they are good. Again thank you so much to have put in your kind words, it meant alot to me.. 🙂
Thank you so much for this vid was dreading wireing up this case you explained it all brilliantly so even a noob like me can understand
Hi john, welcome to my channel. I am glad this does aid you. All the best with your build and thank you for the compliment.
excellent descriptions of the features of the case and the explanation of the RGB controller
Hi radar52, welcome to my channel and thank you for your feedback. All the best with your build too.👍👍👍
simply the best detailed vid on this awesome case. can't wait for part 2, hopefully there's an air-cooled setup for reference. keep up the good work!
Hi sghound, welcome to my channel. Part II is on its way. still creating in progrees as waiting for the neccessary parts. as for your request on Aircooling, I will take up your request 👍
Wow, saw few videos about this case on YT, your content is by far the most comprehensive and detailed....main thing u were able to answer is fitting the AIO in the air cooled motherboard position... manual says u can fit
Hello AR, welcome to my channel. regarding of your request, it's in progress, I will be doing a build but that will take sometime as currently am busy at work. thank you for your visit and I will see what I can do.
@@KleoYan thank you looking forward to it.
@@AR-ke8wg you are most welcome. as said, it will take sometime. nevertheless thank you for waiting.
I have just bought the case and waiting for the postman to deliver it to me. I set up lots of cases, but I was worried about ARGB as I had never used ARGB before. It looks so simple with your elaborate explanations. Thanks for the great work.
Hi Osman Biçer, welcome to my channel and thank you for your valuable feedback. All the best with your build too.
Kleo how can i contact you? I need to ask some questions to build my system into the case safely. If you don't bother of course.
@@KleoYan
@@osmanbicer14 Hi, you can contact me via my email at godzylatech@gmail.com
I spent all day wireing the LianLi Lancool 216 thats the best video i seen Thanks I will be rewireing tomorrow
Hi David Paradise, welcome to my channel and thank you for your valuable feedback. All the best with your build too 😉
It is very detailed, this is the best case introduction I have ever seen
Hi Zh Pung, welcome to my channel and am gald you like the content and to have leave your valuable feedback. thank you!
Kleo really appreciate to your video about lancool216! Especially AIO360 with motherboard shifting up! There were barely youtuber practicing this setup for us! It helps me a lot. Thanks very much!
Hi 許富傑, welcome to my channel. I am gald you find my content useful, infact I am doing most of my content as a PC Builder standpoint, there are things as a PC builder wants to know but I am not perfect. Thank you for your valuable feedback and all the very best with your build too.
Love your thorough case reviews. Keep up with the good work.
Hi Csongor Boros, welcome to my channel ant thank you for your valuable feedback.. All the best with your build too.
Fantastic video :) ... I love in particular how you explain how the optional "control RGB lighting by pushing buttons" controller setup and install better than Lian Li themselves explains it :) .. seriously Lian Li needs to hire you and pay you to explain things to customers your videos are that good :) ... but I think you will just have to settle for the heartfelt thanks of people like me who are grateful for your kindhearted generosity in posting videos like this to help people like me - you are the best ! :)
Hi andrepurchases, thank you and I am glad you like my content. There are other content which might interest you. Example this aid a number of viewers on cooling their processor. th-cam.com/video/xZ2R4roF1_Q/w-d-xo.htmlsi=8xzqrKqehUe7-dgT and there are many more www.youtube.com/@KleoYan/videos . Oh I almost forget, there is a part II on the build th-cam.com/video/8lnysdX5A_o/w-d-xo.htmlsi=acD35iAVjBpPZdC3
Hi
I've bought the LianLi Lancool 3 RGB & Arctic Liquid Freezer II 360mm after I watched your review about it. But then I just watched this video makes me interested more in this case 😅
Hi ya Kid, welcome to my channel.. oops! sorry.. hmm Lancool III is a bigger brother of this case, if you ask me which case looks better? It will be the Lancool III, the unique mechanism and at the front, it looks fierce.. Anyway if you decided to get this case for another PC. you will have both brothers in arms. ok am crazy.. but ya, I mean if you have the Lancool III, make full use of it first. As this case will still be there for sometime if you wanted to change your chassis later. who knows more good chassis will be out by then. 😉
How much is Lancool 216 in your country?
It hasn't released in my country.
Btw your channel is so helpfull & keep it up 👍👍
If i can suggest u, please make a comparison video LianLi Lancool 2 vs LianLi Lancool 3 vs LianLi 216.
Thx 🙏
@@kid9281 thank you for the compliment, it's not here in Singapore yet, this case I have is provided by Lian Li direct, so I can't answer your question as in how much does it cost in my country.
@@kid9281 hi, I do not have the Lancool 2 as for Lancool 3, I have done the thermal test which you can find here th-cam.com/video/1SPioF78x_E/w-d-xo.html as for Lancool 216, I am in process to do that, but this will take time. thank you!
This channel is CRIMINALLY UNDERRATED. Sorry, had to stress that.
hi Karthik Sankaran, welcome to my channel. Hahahaha! 😂😂, you are funny. Hey! thanks for the shoutout of my channel. Greatly appreciated it.. All the best with your build too. 😉
Very detailed review of the case. What screws should be used for the blanking plate? Can't seem to find the "h" screws based on the manual to be used for the blanking plate. Thanks
Hi Gusion Lesley, welcome to my channel, they are size m2.
Thanks for the detailed info bro, u helped me to find correct connectors for front panel
Hello Ayan Chakraborty, welcome to my channel, am glad this did aid you. All the best with your build too 😂
You know what i love about you? When you do a review of a product, you do a FULL REVIEW of that product. I got this case, and i am sure that i will learn something new about my case; like you did with the MB Asus rog B760-F review. Thanks you
Hi Mamour113, welcome to my channel and thank you for your feedback, greatly appreciated it. To be honest, this channel I’ve created is not really reviewing. Is more of sharing my experience on PC components. I might be wrong at times as I get to learn through feedback from viewers. Thank you again for the encouragement 😉 by the way, something to share. This might aid you on bring down your cpu temp. Is not about mx6 from arctic is about the method which I shared with my viewers. Hope this will aid you too and all the very best with your build too th-cam.com/video/xZ2R4roF1_Q/w-d-xo.html (method on applying thermal paste)
@@KleoYan Yeah it feel more like sharing than reviewing for sure. Thanks for the link, i just bought a arctic mx6 for my little i5 13400. I hope it will be great performance.
@@LeMamour I see, that's good. You should have good performance that's for sure. all the best with your build too.
Thanks for your clarity on what is with the ARGB or the non ARGB versions. I need a new case and have many reasons for choosing this case, but the ARGB version is in backorder in the Netherlands... up to 50 days! So I was tempted to get the non ARGB, but you loose so much functionality, and they are only offering it at 5-10 euros less.
I suppose I am going to be waiting.
Hi Julie Fisher, welcome back. Am glad this aid you on your purchase. this case is hot selling when they were release and it's the same over here at my country. Will have to wait till they have the argb version instock. All the best with your build too 😉
@@KleoYan Thanks, your guide will be a great help.
@@Jules_Diplopia you are most welcome 😊
Another great video Kleo, thanks for sharing.
Hi Peter, welcome back. Wow looks like you are observing most of my content. Hey by the way if you spotted anything and will like me to improve on, do let me know and thank you for taking the time to watch my content 👍😊
Thank you for the indepth rundown of this case! I am debating between the 216 or a Lancool III right now. However, I do have a question regarding vertical mounting in this case. You pointed out that fans won't fit under the card in the stock case vertical mounting orientation (at least not two fans). But would I be able to forego the stock mounting and instead use a 3rd party vertical mounting bracket such as a Cooler Master V3 and still be able to utilize the two fan mounting positions? Is there room for a 3rd party bracket and fans? I know if I mounted horizontal, this wouldn't be an issue. However, I currently have a CM V3 and a bunch of Uni Infinity fans in my current case. So it would be great to be able to utilize those parts in this case. Otherwise, might need to turn my focus to the Lancool III. Any help would be greatly appreciated! Thanks!
Hello TravD23, welcome to my channel. I do not have a CM v3 mount but I do know this mount allow you to adjust the rear to give clearance for you to plug either hdmi or dp csbles. This is not an issue. The only concern I have is. Can the CM bracket fit on the PCI-E slot which I am not sure if it does. Since am not able to give you a straight answer, you only got two choices. 1 is to take the risk and to try 2nd have it horizontally mounted.
Another well done content kleo, I have never seen anyone doing so much details and explanation on pc products. These make your channel unique. I get to learn alot from your content. Keep up the good work. 🥰On one side note, I still prefer my o11d mini. 😂
Hi Nox Mu, thank you for your feedback. Yup am not doing any marketing gimmick. I will only bring out content which are good for PC Builders which are facts and not just the look of a product, but still these are based on my own experience.
@@KleoYan that is exactly what we want Kleo, this will make us feel confident about a product before purchasing it. What's the point of having fancy looks or argb where it does not perform. I feel is a waste of money just to pay for looks.
@@noxmu4715 thanks for the enrougagement. will try to keep up.
Congratulations for the beautiful video, I follow you a lot and your explanations are perfect, I own all the lian-li and it's great, unfortunately I made a mistake buying an asus motherboard that does not have a type C connection, there is an adapter of lian-li to use it on any MB, thank you for a possible reply.
I use a language translator
Hi b. g, welcome back, hmm. I only know you can use this but you will not be able to have the usb type a port on your case.. www.amazon.com/gp/product/B08TW9S7B3/ref=sw_img_1?smid=A1SZ0VYRG8JK8G&psc=1
@@KleoYan grazie
@@b.g17 you are most welcome and all the best with your build. 🙂
Hi, thanks for the awesome video. I would like to ask you something. Is it possible to link the 160mm rgb fans to the sl inf fan controller?
Hello Russell Lim, welcome to my channel. what you can do is, there is this cable which is from the case to your motherboard but instead to your motherboard, plug it to your uni controller. on the case argb button, hold on the mode button for 3 seconds to switch from case control to mobo control, once it's on mobo control, your uni fan controller takes over.
but do note the argb effects will react differently as the 160mm fans are not uni fans. This will give you a better picture. imgur.com/PrPqFBt
@KleoYan Thanks bro. Btw your channel rocks
@@russelllim3574 hi, you are most welcome and thank you for the compliment. I wish you all the very best in your build too.
Thanks for the review, it is great. By the looks of it, you won't be able to mount a radiator in the front if you have one at the top. Is that fair to say?
Hi Rob Kennedy, welcome to my channel, yes you are correct, there will be some limitation on that if you want to mount 2 in one go.
Thank you for this detailed video. I really want this case. How does the case look when you install 3 120mm fans in the front? Is there a big gap in the front. I am planning to buy and install 9 120mm SL infinity fans in the case. 3 in front, 3 top of the case with AIO, 1 exhaust and 2 top of the psu. Your reply will be greatly appreciated. Thank you.
Hello ThrillSeeker, welcome to my channel, it will fit nicely at the front with 3 x 120mm fans, there wont be much gaps. Something to take note.. if you replace those two 160mm fans at the front with the SL Infinity 120. you are losing airflow and noise will increase.
@@KleoYan Thank you so much for the reply. Will I be able to control all the other SL infinity 120 fans including the 160mm fans with L Connect software, if I do decide to keep the 160mm fans? Do I need a separate controller or I can connect all the fans that comes with the case? Thank you
for the 160mm you can connect to the SL-Infiinty hub, sync 2 or sync 4.. just make sure when you plug to lets say sync 2, your SL infinity fans have to plug to port 2, so that you have the SL Infinity dash board appears I L-Connect 3. The squence goes like this.. sync 2 follows Port 2 and sync 4 follows port 4
Hi Kleo, I was wondering what type of vertical mount did you use without compromising the two bottom fan intakes. Thanks!
Hello THICC LOWRY, welcome to my channel. I was using the old Lancool II vertical GPU Mount but I've changed the raiser to PCI-E 4.0 as the Lancool II vertical GPU Mount is PCI-E 3.0.
@@KleoYan Thanks, I just bought the O11D Evo vertical mount kit which has Gen 4 PCI-E! I can now sleep easy 😄
It's a bit expensive but it'll be worth it!
@@thicclowry103 I see. Let us know if the gpu kit is able to mount with fans below. Thanks and all the best with your build
HELP NEEDED: I have just purchased and built inside this case (Black RGB version) but do not have the optional RBG assembly (completely out of stock in US). Is there any way to plug something directly into my motherboard (MSI z690 Gaming Carbon Wifi) so I can adjust the RGB settings using Mystic Light? I just have all LED's switched off on the motherboard, because I can't customize the front of the case.
Hello Kyle E, welcome to my channel, you can always get a after market argb controller to control your fans. so long the controller have a 2 pin switch.. try look for Gelid Amber 5 argb controller.
very nice explanation, helps a lot, thx
Hi fra leb, welcome to my channel and it's my pleasure. All the best with your build too.
Hey this video has been really insightful. One question if I don't have a 5v aRGB in my motherboard can I use the aRGB front IO module in replace of the 5v header to change the colors of the front fans and any other fans that uses aRGB?
Hi veinsss, welcome to my channel. yes you can but I have to inform you that the ARGB controller which is the 2nd I/O, it's purchased separately. you can view at this page as it's an optional add on lian-li.com/product/lancool-216/
Would you be able to confirm the possibility of using bottom fans with vertical gpu mode?
Possible work around #1: depending on how much clearance is left between ATX psu and bottom grill, and how much the standoffs threads penetrate through the grills. I might be able to use thin fans below the grills.
Possible work around #2: To use SFX-L or SFX PSU to mount the fans below grills (Still need to make sure the standoff screw don't destroy the fan blades).
Hi White Dancer, welcome to my channel. For the moment will put this on hold will answer you once I put a system in that will be before Christmas as currently busy with year end closing at work. Sorry to keep you waiting. Thank you.
@@KleoYan Also the standoffs seem to be under pcb, not the pcie slot causing the middle section to bend under load. Not sure if fastening the backplate screw will help to hold the gpu in place or it will eventually go down hard on the pcb. Especially considering the current gen gpus are such behemoths.
@@whitedancer5866 hi, welcome back. Yes am aware of the pcb only. At two points, front and back of the pcb is ok just that the Center part when you place the gpu in. That might be too weak. Will need to send feedback to Lian Li about this. Once again thank you for your valuable feedback. I am just running out of time during year end. Due to closing. I will see what I can do during my December break which is 4week or December
Sounds great if you have contact in Lian Li. I would prefer not to sacrifice one feature for another, hope they come up with a V2.
Is it possible to mount an arctic 360mm aio liquid cooler to the front without having to remove the stock front fans?
Hi T.L. Splitz, I believe I have answered your question at part 2 th-cam.com/video/8lnysdX5A_o/w-d-xo.htmlsi=4ZGUW7qkwClSkOs9
amazing video, just got one question- where is part 2? :D
Hello Ofoid Rei, welcome to my channel part II in progress. Pardon me to keep you waiting as am busy finishing up other content deadline, but it will be done before year end. Thank you.
My Motherboard is B450 Tomahawk which only have 4pin 12 header. How can i control all the ARGB fans through my motherboard if it doesnt have 3 pin 5V header? What do i need to buy to make it work?
Hi BearGolf, welcome to my channel. It's either you get an ARGB controller fan hub or the addon Lian Li ARGB control & USB module lian-li.com/product/lancool-216/ (scroll down till you see ARGB control & USB Module. www.amazon.com/Lian-Li-Lancool-Controller-Black/dp/B0BNGMFN9R/
Great review Kleo. so detailed. just a clarify does an ARCTIC Liquid Freezer II 360 fit in the roof with no problems even though Artic use a thicker radiator than most other aio s ?
Hello paalo sordoni, welcome to my channel. Yes it does fit a 360 LF2 without any issues. It’s illustrated in this video.
@@KleoYan thankyou Kleo, 👍👍
@@paalosordoni7932 most welcome.
Bro the power and reset switch compatibility on a b550m am4 ds3h mobo please reply i beg😢
Hi BudgetLamp, welcome to my channel. The pinout for power and reset switch on the motherboard are standard. the 216 case front panel connector is compatible with any standard motherboards, inclusive of your motherboard.
sometimes, i miss singapore...
Hi Masmur Pratama, welcome to my channel. Thank you for the love of my country and with the covid policy open up, you can always pay Singapore a visit. 😊
another good video !!!!!!! cant wait to see you review lianli evo XL on 2023 Q2
Hello Mr_Problem_01, welcome to my channel. Lets see if I can get an Evo XL from them, if I do, I will do a content on it.
Great Video Bro, can I ask you what cooler you mounted? And if possible to mount a ARCTIC Liquid Freezer II 280 A-RGB on the top the thickness of the radiator and fans is 67.5 cm, or even the Artic 280 mm?
Hello Coolissim0 Unl1mited, welcome to my channel. Am using a Arctic Liquid Freezer II 360 AIO. If you are using 280 just make sure you have enough clearance. I do have a 280 LF2 aio but it can’t fit the top as the motherboard VRM heatsink is hitting the radiator from fitting.
@@KleoYan Hi mate thanks for the answer, and welcoming. So I most likely will go with this radiator, can I ask you if is noisy? From the reviews looks good. And about the case , would you buy it again? Or another? Is it noisy? and the dust filters works or it cuts much the air flow?
@@coolissimo69 hi I will be doing my main rig in this case and if you are using Arctic LF2, the fans are quiet. As for dust filter. This case does not have fan filters except the bottom which is for the psu. However if you choose to want the fan filter for the front. You can purchase it separately. In my case just regular cleaning will do. I don’t really need fan filters.
Hello Kleo. This video is awesome! I have a question if you don't mind. I have a Lancool 216 RGB which didn't come with the RGB Controller. Now, I made a mistake with my build and I got a Motherboard that has no ARGB headers. I also got a PE120SE cooler that has ARGB fans. If I buy the front panel RGB Controller, can it also control the CPU Cooler ARGB fans, or will it only be able to control the two front 160mm RGB ones?
Thanks :)
Hi Spain Space, welcome to my channel. the 216 controller has a limit (amount of argb devices) just to share with you my experience. If you purchase the 216 argb controller, yes it can control all your argb fans and the aircooler argb but there is a limit and you might end up buying an additional argb hub to light up all your argb devices. I would suggest you to get something like this www.amazon.com/gp/product/B0BP1JZTND/ref=ox_sc_act_image_1?smid=A1X11FOVGZ8LKJ&psc=1 where it has a remote control to check the argb effects, but do note, this only have 8ports which can cater for 8 fans only.
Thanks for your response!@@KleoYan
@@SpainSpace most welcome. all the best with your build too. 😉
Great video!! But I have a question/concern.
Most motherboards have only 1 USB 3.0 Connector, in that case, this ARGB controller's USB 3.0 ports cannot be used, making it useless right? Because top I/O (power, reset and 2 x USB port already connected to motherboard. My motherboard is MSI B550 Gaming Edge Wifi
Thanks
Hello Byambadorj Lefever, welcome to my channel, yup if your motherboard has only one usb 3.0 header, you can't use that. Unlike some other motherboard that has two, then it functional. thank you for your feedback.
Sorry hows the top clearance? Wanted to build an arctic 360 on top but it needs about 65 mm
Oh wait that's exactly what you tried in the vid! Thanks!
It looks a bit tight for the motherboard cables in the top left corner though...does it actually fit well?
hello x Profetorum, welcome to my channel, yup thats why I make use of the Arctic Liquid Freezer II 360. If this can be mounted, the rest of the AIO will not have an issue.
Hi, could you tell me how much space is between the power supply and the side pannel, i was wondering if i can use a corsair rm850x shift with it.
Hi FCE, welcome to my channel. It’s going to be a tight fit, it’s estimated 15mm space.
@@KleoYan thanks, so it wont fit. Corsair says it needs min 30mm
Hello, Kleon. One query regarding the non-RGB version of this case, is it possible to shift the I/O panel from the top to the side?
Hi The Gentle Don, welcome back. Yes you can. The I/O slot at the side will be there and covered by a plastic cover.
@@KleoYan Ah, that is good to know. I watched the video you mentioned, which was covered by a plastic. I thought that in non-RGB version it could not be switched. Anyways you are doing fantastic work, I adore your videos, and I really appreciate your quick replies.
@@TheGentleDon. you are most welcome. All the best with your build too 😉
@@KleoYan ❤️
Hello kleo.
I have this case arriving today(rgb version) with the controller.
I have two questions about extra NON rgb pwm fans.
1: Can i daisy chain two fans and connect them to one pwm header on the hub?
2: my air-cooled cpu has two pwm fans(no rgb).
Do i connect the air cooler fans on the MB cpu fan header or on the hub?
Thank you for your detailed videos!
Hi TheKids_CallMeBoss, welcome to my channel. Fan hub i will just use it for case fans.
it's not advisable to daisy chained your fans and to plug to the fan hub/controller. If you daisy chained your fans, best to plug directly to your motherboard fan header.
as for AirCooler fans, I will not plug to the hub, I will plug directly to the CPU_FAN header. in the event if the hub goes faulty, at least your CPU Aircooler is still operational.
@@KleoYanAren't the 2 front rgb fans daisy chained and connected to 1 pwm header on the hub?
Thx for reply
@@thekids_callmeboss6577 nope, when you get the case. the front fans are not daisy chained. they connect individually to the fan hub/controller.
@@KleoYan ok ty very much, this is first time I will have rgb fans and combined with a few non rgb fans for bottom, top and rear.
Since the extra fans will be connected directly on the motherboard.
I use the bios to control the fan speeds, like I have in my old case.
How do I control the speed/fan curve on the two front rgb fans.
Is this only possible with software?
I have a msi motherboard.
@@thekids_callmeboss6577 from the controller you will need to plug the pwm connector to your motherboard, then use your motherboard UEFI HWmonitor section to control the PWM curve.
Question to the author of the video: Connector USB Type C, it is Gen1 or Gen 2, i.e. its speed 5 or 10 gb/sec ?
Hello Eugene Belyaev, welcome to my channel, you can just call me Kleo. The type-c can cater for 10gb or 20gb. it's a Gen2 2x2 plug.
@@KleoYan The connector Type-C on the case's front panel connecting with the internal port USB Type-C on the motherboard, which never has a Gen 2x2 structure (speed 20 Gb/s) but only 5 or 10 Gb, depending on the type of internal port Gen 1 (5 Gb) or Gen 2 ( 10 GB)
20 Gb/s speed usually has only Type-C port on back panel of the motherboard (Sorry for my bad English)
@@eugenebelyaev2436 my board has this 1 x Front Panel Type C USB 3.2 Gen2x2 Header (20 Gb/s) which is for the front Type C I/O. let me test some stuff out and will let you know. as I always thought is based on what your motherboard front type-c connect is.
@@KleoYan My motherboard is a MSI MAG H660 Mortar MAX and her has 1 port on the back panel Type-C Gen 2x2 (20 gb) and 1 internal port Type-C Gen 2 (10 gb), but I'm not sure that for connecting to the port on the case, port on the case's front panel will be the same speed 10 gb/sec.
What do you think about it ?
Hi, just to inform you. I have tested two chassis with two different boards, the X670E Steel Legend front type c is able to transfer at 20gb with both the cases I have tested. and for another board which is the B550m mortar. it's at 5gb on the same two cases which I have tested, I dont think the front type-c cable on your front i/o matters. what matter is, does your board support those transfer rates. Case tested Lancool 216 and current case which is going to be my next content, the Montech SkyTwo.
Hi! Good rewiew! 👍 Can I controll the 160 mm ARGB fans with the L- Connect 3? Thanks
Hello Krisztian Horvath, welcome to my channel. if you are not using any uni fan controller, then no. L-Connect 3 only react when you are using uni fan controller or the strimer plus V2 controller.
@@KleoYan I have 7 Infinity fans with controller. Am I wrong or do I need the Lian Li UF-EX Kit for that?
@@mokky55555 oh ok. Then connect it to either sync 2 or 4 of the uni controller and yes you do need to that’s the lian li argb cable kit
@@KleoYan Thank you! I'm building my first PC and I was not sure about that.
@@mokky55555 you are most welcome. All the best with your build.
Hello, NEED HELP PLEASE! :(
When I set my RGB lighting to a custom color, it always defaults to the default RGB setting after restarting the PC. I don't have an ARGB connector on my board and I use a lan216-1 panel. Is it possible to save the color settings somehow?
Hello BackCZE welcome to my channel. Do you have both front I/O panel. One which is the normal I/O panel and other is the argb I/O panel. For mine I did not plug to the motherboard argb header. I just use the front I/O panel and when I set the mode or effect or argb I wanted, it will stay fix even rebooting my system or to cold boot the system. If you are having issues. Kindly have your argb I/O panel replaced.
@@KleoYan Thank you for the reply I will try to return and replace the panel
@@BackCZE you are most welcome.
Best review on TH-cam
Hi Ya! Micheal Bear, welcome to my channel. I did a mistake so can't be best.. I mentioned that the front allow 3 x 140mm fans, is only capable of 2 x 140mm. Still, thank you for your compliment and have a great weekend 😉
Can I place a 240 aio at the top...coz case Info only suggests 280 n 360.. which is weird given the case size
Hello edward enock.M, welcome to my channel. It is able to cater 240 without issue, since it cater for 360 or 280.
@@KleoYan thanks
@@justeddm you are most welcome and all the very best with your build 🙂
any idea when will we be able to order one? Thanks.
Hello Melvin Ooi, welcome to my channel, should be around early december period. If you like this case, you might want to approach one of my favourite online shop Cyber Cypher, you can ask him about it at telegram. t.me/+21TJAnLHC7FlMzU1
Bro can I mount 3 UNI SL fans in the bottom of the case? Even though there are 2 exhausts. Please try and let me know 🙏
120mm fan
@@CallMeFearS hi welcome to my channel. I am afraid you will not be able to fix 3 x 120mm fans. I have tried. Unless you do not use the default fan holes at the bottom and to use zip tie. But I find it no point as your third fan is till block by the front metal piece at the bottom. Restricting it to draw air from the bottom.
So you can fit 3x140mm fans on the front of the case (i have 5x140mm Arctic P14 fans)?
Hi Daniel Medeiros welcome to my channel. Do pardon me. That’s a mistake and I have address with a pinned comment. You can only place 2 x 140mm fans at the front.
Thanks for replying man!
@@danielmedeiros5832 you are most welcome. All the best with your build.
And you can only use 2x140 on the top of the psu, if you are using the case in the air mode, other wise just 2x120 if using in the wc mode, am i right?
@UC-oCdb1ls9N1VBCZO6WJy3w correct.
Solid video, thanks!
hello Weaselspit, welcome to my channel and thank you for your feedback. 😉
I forget to mention, there is part II th-cam.com/video/8lnysdX5A_o/w-d-xo.html
@Kleo Yan Indeed, I watched that too! Just purchased this case for a build, this really, really, really helped me out. Especially with understanding the fans and how to wire them. Ordered the fan controller separately and am now not worried about going into the build at all. Wish you all the best with your channel. 🙏👌👍
@@KleoYan Also definitely subscribed!
@@weaselspit3439 hi thank you for the feedback. Greatly appreciated it and all the best with your build too.
can you use 3x120 fans instead of 2x160?
Hi Fudgewaffle, welcome to my channel, yes you can use 3 x 120mm fans at the front, it has a modular pillar for you to mount your 3 x 120mm fans in place.
no matx left-bottom hole??
Hi ahdung ai, there should be holes for m-ATX placement. kindly refer to the printout stated on the motherboard standoffs. you might need to adjust the standoff bolts.
@@KleoYan It's not in your video actually, I guess yours is a beta version.
@@ahdungai8489 Hi I the version provided to me is the actual version. you might want to check the motherboard manual for instructions. it's clearly stated on page 7 drive.google.com/file/d/1jMySMcMJkEkyJQGkl3lBP-MJJjfdiLKX/view
@@KleoYan drive.google.com/file/d/14PrgQvLEGcyk2xce-NmqzrFJ_L8VxOBM/view
@@KleoYan manual wrong too.
Can you use both iOS at once?
Hi Serf, welcome to my channel. Yes you can use both I/Os at the same time.
@@KleoYan Thankyou for the reply and the very detailed video, hats off to you sir👍🏼
@@Kopi.YT. you are most welcome, all the best with your build too. Hmm, you might be interested in part II th-cam.com/video/8lnysdX5A_o/w-d-xo.htmlsi=kWaN_j5Ti2hWClaI
Hey, do you mind sharing the cost of the fan in SGD?
hello c, welcome to my channel, hmm are you talking about the 160mm fans? they are default case fans and I don't think are sold individually.
@@KleoYan Sorry, i meant the price of the case!!
@@chinlim14 oh ok. Do pardon me, I only know the USA pricing which is at 100 USD for the non argb version and 110 USD for the argb version. you might want to check with one of my favourite online shops as they always have Lian Li products before others does. shop as listed below
Carousell www.carousell.sg/u/CyberCypher.Computers/
Shopee Online shopee.sg/cybercypher.computers?categoryId=100644&itemId=19820267878
@@KleoYan I will keep a lookout, thanks for sharing the links!
@@chinlim14 you are most welcome👍