4 months old and already breaking down. The $150 washer I bought 23 years ago still worked when I “upgraded”. I should go to the landfill and try and dig it up.
Have had mine for 6 months so far. The first red flag should have been when they used a thin plastic lid latch on a door without any supporting struts and low spring tension. Let it slam just once and you don't have a washer until parts come in unless you want to fiddle with the lock sensor.
U ain't lying brand new and the problems are over n over n over....n0w mine won't stop blinking rotate knob to available cycle...it won't even let me do this...and my dryer is the same
Please use a surge protector before plugging a computerized washer into an outlet. I've owned 3 Maytag impeller washers since the old 2008 Maytag Bravos, and having it connected to a quality surge protector in my 46-year-old house is essential. Other than the normal wear and tear from weekly use, all my previous 2 machines lasted their average 7-8yr lifespan without needing repairs. Yes, we are buying machines complicated by their over-dependence on microprocessors, but that is the mandatory way of manufacturing them, no matter whether they be a vaunted Speed Queen or mid-range Maytag. Find a machine to match your household needs and buy an extended warranty and surge protector.
I got this one about a year ago and it has sucked from the first day and still today. I am so frustrated with its performance and ability. Major problem is it does not give it enough water to wash. The clothes are barely wet and I can hear the machine struggling to agitate. Long story short machine needs more water. I have taken stuff out and still had streaks of detergent on them and I happened to catch it not rinsing well at all. It shakes so badly that it gets off balance and I can't move it. There have been other issues and I am done with it. If I was Wonder Woman I would go back to the store and throw it back at them! I have to stand by it and babysit it. Im going to call for repair man see if there is anything they can do.
I have also had the EXACT Same Issues! I have always had a Maytag, but I hate this unit. When you called your repair man, was there anything they could do to stop the off balance issue?
I purchased the same machine.. biggest mistake I have ever made. I have all the same problems you have. Warranty is a joke. Lowe's home improvement store of Bristol virginia.. would not exchange it the next day after my purchase..the repair says he doesn't have an answer for the problems..I have lost $900.00..
😡 DON'T BUY THIS WASHER--the first time I purchased it--it broke after only 3 years old. I had a warranty (THANK GOD)--the warranty company paid me a great majority of the money for the washer--with that being said, I wanted my washer & dryer to match one another so I added money to what the warranty company paid me in order to purchase the same type of washer--worse decision ever--the new washer is doing the same thing--THANK GOD AGAIN--I called Home Depot within the 48-hour window and that gives me the option to have it replaced or get my money back--OF COURSE I WILL CHOOSE THE MONEY BACK OPTION THIS TIME--I AM SO OVER THIS--I hope things work out for all of you.
About to replace the lid latch lock mechanism for THIRD time since purchasing Sept 2020. It was the only washer in captivity so I had no alternative. This time will be my first effort at DIY but the dealership agreed to order the part and let us do the fix. My husband breaks the lid by trying to force it open whenever there is a load out of balance or similar. He is supposed to Step Away From The Machine and do no harm. sigh
here is an update guys…the appliance tech just left my house and said i need a clutch and slider and its $480.00 i don’t actually know what those things are im just repeating what and how much haha.
Same. Worst washer and dryer I have ever owned. No power. Lid locked, wet clothes inside. Maytag suggests finding a service provider to come out. Spent $1000 on this and I didn’t even get 3 years out of it.
This is the most aggravating washer I have ever owned. The 10-year warranty isn't worth a crap if you ever need to use it. Give me the older style any day.
Can’t give me one. I did an average-large load of t shirts when it was done there were some that didn’t even get wet never mind clean. I bought a large washer to cut down on loads not have to do them again 😢
Mine won't even let me go through any of the diagnostics as soon as I get on that screen and try stuff f3 e2 comes on. I clear it..... Then try things again in the same code pops up. On my paperwork it says it's a pressure sensor issue and that's integrated into the main board behind the control board. When I asked questions other people say it's a temperature control issue but that's not what it says the code is on my paperwork
La compagnie wirlpool qui fabrique maytag devrait avoir honte de vendre de la cochonnerie comme ça, après 14 moi j ai dû faire changer la transmission et maintenant c'est le panneau électronique et elle fait un bruit d enfert, jamais acheter ce produit que l on ce le dise
I refuse to use the WIFi. Anyone know what the “special features” offer? I wish I would have kept my old washer and dryer. My clothes looked and smelt so much clearer!!! 😫 😭😭😭😭😭😭😠
I can't believe how bad this model is. It was the most expensive model at Homedepot and it's shocking how bad the Maytag MVW7230HC. It's really a scam piece of machinery. A technician told me it's probably the worst machine he's had to work on as it's almost impossible to fix if an issue arises. I junked mine after Maytag sent an incompetent repair man who couldn't fix it. a private guy suggested I don't even waste my time. This machine will be money burned. It's garbage.
Somebody, anybody please tell me wtf this machine sprinkles water on top of the clothes and starts doing its version of agitating when the clothes are still dry?
Mine gave me problems right from the beginning as well. It's also not helpful that the same interfaces used on different models and the codes mean different things on different units.
@@mariaegodinez4958 it could be two things, the transmission that switches gear to lock spin or the compositor , round tube looking thingy with 2 wires connected to it.What fix mines is compositor change.
One year into ownership and my lid switch is broken, i was hoping there was a menu to disable it hidden somewhere but i guess not... Im just gonna buy a new washer, unfortunately most people will only see these comments after theirs breaks and they go looking for a solution. This machine is a absolute robbery, im seeing tons of comments about the lid switch. Maytag is no help, they wanted 350$ for a replacement. No way. If you can, Stay away from this pile of shit.
This guy doesn't know what he's doing. He's just touching buttons. LOL. By the way, got my first Matag and supposedly the marketing ploy is that Maytag guy just sits around waiting for customer to call with issues and no one does. Well, its a bunch of bull shit. Had mine for under 2 years and it broke already. I called customer service and since it had no extended warranty they want $350 for someone to come and check and see if they can fix it. Why would i throw more money to junk when a new one costs about $800? Never ever again will i buy a Maytag which parent company is Whirlpool, associated with Kitchen Aid, and Amana. Just watch for this company's.
Yes we have a Maytag commercial technology washing and after it is thought washing it still is dripping water in the washing mashing even if the water is turn off what could it be it not and it old machine
These are the biggest piece of shit known to man. And Maytag customer support is a joke. They said in a letter that they couldn’t locate and repair technicians in my area. Good lord there are dozens of them!
4 months old and already breaking down. The $150 washer I bought 23 years ago still worked when I “upgraded”. I should go to the landfill and try and dig it up.
Same here. What a piece of junk.
We've the same model, its a hunk of junk.
Same. This is an absolutely atrocious model and is worth about $2. Dogshit quality. Maytag sucks
3 year old piece of junk…stay away from Maytag
Have had mine for 6 months so far. The first red flag should have been when they used a thin plastic lid latch on a door without any supporting struts and low spring tension. Let it slam just once and you don't have a washer until parts come in unless you want to fiddle with the lock sensor.
Biggest mistake i made this year buying this piece of crap!!!😡😡😡😡
U ain't lying brand new and the problems are over n over n over....n0w mine won't stop blinking rotate knob to available cycle...it won't even let me do this...and my dryer is the same
This is ridiculous this is my second Maytag washer in the past year! I don’t know what to do anymore.
Please use a surge protector before plugging a computerized washer into an outlet. I've owned 3 Maytag impeller washers since the old 2008 Maytag Bravos, and having it connected to a quality surge protector in my 46-year-old house is essential.
Other than the normal wear and tear from weekly use, all my previous 2 machines lasted their average 7-8yr lifespan without needing repairs. Yes, we are buying machines complicated by their over-dependence on microprocessors, but that is the mandatory way of manufacturing them, no matter whether they be a vaunted Speed Queen or mid-range Maytag. Find a machine to match your household needs and buy an extended warranty and surge protector.
Utter garbage.
@@wyzemanneven though the plugs have that warning tag about directly into outlet only?
This video has just saved my sanity for at least a few more hours. Can't thank you enough.
Mine is 3 years old. My very old Amana was still working great. I should have kept it.
I just bought this washing machine and I am shocked that it is so noisy!! 😮
I hope it works good for a very long time! 🙏
did you find a fix for the noise?
Sadly, with all the problems I’ve seen both personally and on these videos, it won’t last long.
Ours is working great since 2020! 👍
still working good?
@@jakeadolph676Still going strong! 👍
I got this one about a year ago and it has sucked from the first day and still today. I am so frustrated with its performance and ability. Major problem is it does not give it enough water to wash. The clothes are barely wet and I can hear the machine struggling to agitate. Long story short machine needs more water. I have taken stuff out and still had streaks of detergent on them and I happened to catch it not rinsing well at all. It shakes so badly that it gets off balance and I can't move it. There have been other issues and I am done with it. If I was Wonder Woman I would go back to the store and throw it back at them! I have to stand by it and babysit it. Im going to call for repair man see if there is anything they can do.
I have the EXACT same issues
@@sam42gify me too
@@lorriea794 glad to know I'm not crazy!!! These are the exact same issues I have. Doesn't sound like it's worth calling a repair man
I have also had the EXACT Same Issues! I have always had a Maytag, but I hate this unit. When you called your repair man, was there anything they could do to stop the off balance issue?
I purchased the same machine.. biggest mistake I have ever made.
I have all the same problems you have. Warranty is a joke. Lowe's home improvement store of Bristol virginia.. would not exchange it the next day after my purchase..the repair says he doesn't have an answer for the problems..I have lost $900.00..
😡 DON'T BUY THIS WASHER--the first time I purchased it--it broke after only 3 years old. I had a warranty (THANK GOD)--the warranty company paid me a great majority of the money for the washer--with that being said, I wanted my washer & dryer to match one another so I added money to what the warranty company paid me in order to purchase the same type of washer--worse decision ever--the new washer is doing the same thing--THANK GOD AGAIN--I called Home Depot within the 48-hour window and that gives me the option to have it replaced or get my money back--OF COURSE I WILL CHOOSE THE MONEY BACK OPTION THIS TIME--I AM SO OVER THIS--I hope things work out for all of you.
About to replace the lid latch lock mechanism for THIRD time since purchasing Sept 2020. It was the only washer in captivity so I had no alternative. This time will be my first effort at DIY but the dealership agreed to order the part and let us do the fix. My husband breaks the lid by trying to force it open whenever there is a load out of balance or similar. He is supposed to Step Away From The Machine and do no harm. sigh
Do you know if there is a temporary way to override this while you wait for the new latch?
These electronic machines are nothing but crap
what do you do when it says “sensing” for several minutes then skips right to “washing complete”? any suggestions would be greatly appreciated!
Mine is doing the same, any solution?
Mine is also doing the same thing
Anyone find a solution??
here is an update guys…the appliance tech just left my house and said i need a clutch and slider and its $480.00
i don’t actually know what those things are im just repeating what and how much haha.
What fix mine was the compositor.
No power, outlet works, unplugged for 10 minutes, tried reset and didn’t work. What’s next? Thank you
Same
Same. Worst washer and dryer I have ever owned. No power. Lid locked, wet clothes inside. Maytag suggests finding a service provider to come out. Spent $1000 on this and I didn’t even get 3 years out of it.
Two times repair now it won't turn on locked with wet clothes inside
@@codyb7883 The dryer was fine for us, never had issues, this washer though is a piece if 💩
I’m in the exact situation, did you end up fixing it? Any suggestions?
Please help! Clothes are inside.
This is the most aggravating washer I have ever owned. The 10-year warranty isn't worth a crap if you ever need to use it. Give me the older style any day.
if still under warrant complain complain complain, The finally gave me my money back on it. I got a speed queen.
Their warranty is for a part that never breaks... God forbid if they provide a warranty on the control board, which is $300 - $400 to replace....
Can’t give me one.
I did an average-large load of t shirts when it was done there were some that didn’t even get wet never mind clean. I bought a large washer to cut down on loads not have to do them again 😢
Hello so my door wont open and no power. I tried to do a reset but no go.
Ours just did the same thing. Did you ever figure out how to open the lid with no power?
Very helpful. Thanks for sharing.
Mine won't even let me go through any of the diagnostics as soon as I get on that screen and try stuff f3 e2 comes on. I clear it..... Then try things again in the same code pops up. On my paperwork it says it's a pressure sensor issue and that's integrated into the main board behind the control board. When I asked questions other people say it's a temperature control issue but that's not what it says the code is on my paperwork
What should I do if it will not unlock and release the lid
Buy a new machine, this one is garbage
La compagnie wirlpool qui fabrique maytag devrait avoir honte de vendre de la cochonnerie comme ça, après 14 moi j ai dû faire changer la transmission et maintenant c'est le panneau électronique et elle fait un bruit d enfert, jamais acheter ce produit que l on ce le dise
How do you bypass the lock lid?? My lid won’t lock
Over complicated piece of junk. lol
I refuse to use the WIFi. Anyone know what the “special features” offer? I wish I would have kept my old washer and dryer. My clothes looked and smelt so much clearer!!! 😫 😭😭😭😭😭😭😠
Where did you buy it at?
Garbage machine. My dad replaced the electric board on top for $450 and it still doesnt work!!!!!!
I can't believe how bad this model is. It was the most expensive model at Homedepot and it's shocking how bad the Maytag MVW7230HC. It's really a scam piece of machinery. A technician told me it's probably the worst machine he's had to work on as it's almost impossible to fix if an issue arises. I junked mine after Maytag sent an incompetent repair man who couldn't fix it. a private guy suggested I don't even waste my time. This machine will be money burned. It's garbage.
Somebody, anybody please tell me wtf this machine sprinkles water on top of the clothes and starts doing its version of agitating when the clothes are still dry?
Mine gave me problems right from the beginning as well. It's also not helpful that the same interfaces used on different models and the codes mean different things on different units.
Did medium motor spin test, no spin F7 E1 code came on
I have the same problem 😢w my Mytag and I bought a year ago
@@mariaegodinez4958 it could be two things, the transmission that switches gear to lock spin or the compositor , round tube looking thingy with 2 wires connected to it.What fix mines is compositor change.
Thanks a lot
How to you replace a lid switch on this one
Mines not lighting up
I have the same problem, it may be the interface board
Bad Control board. Only $296 plus tax, 😢
My is not filling with water and technician changed the water valve . and now is saying that might be the mother board.
My drain overfills at least once every 3 months since i bought this same one.
If the drain overfill it is not your washer. You may have a partial drain clog. the flow from the machine should not be able to cause the overfill.
One year into ownership and my lid switch is broken, i was hoping there was a menu to disable it hidden somewhere but i guess not... Im just gonna buy a new washer, unfortunately most people will only see these comments after theirs breaks and they go looking for a solution. This machine is a absolute robbery, im seeing tons of comments about the lid switch. Maytag is no help, they wanted 350$ for a replacement. No way. If you can, Stay away from this pile of shit.
It’s the worst washing machine ever made. Most Maytag products are bad. I have one and it’s a nightmare
4 months old and lid switch broken.
This guy doesn't know what he's doing. He's just touching buttons. LOL. By the way, got my first Matag and supposedly the marketing ploy is that Maytag guy just sits around waiting for customer to call with issues and no one does. Well, its a bunch of bull shit. Had mine for under 2 years and it broke already. I called customer service and since it had no extended warranty they want $350 for someone to come and check and see if they can fix it. Why would i throw more money to junk when a new one costs about $800? Never ever again will i buy a Maytag which parent company is Whirlpool, associated with Kitchen Aid, and Amana. Just watch for this company's.
They told me the same thing, 350$ for a tech to come look at a lid switch. No way.
Yes we have a Maytag commercial technology washing and after it is thought washing it still is dripping water in the washing mashing even if the water is turn off what could it be it not and it old machine
Nope that don’t fly ..
If your machine has the code on the Screen it’s locked out … now tell us how to get out the Lock Screen please
Como cancelar switch puerta d esta lavadora buen dia
Mine won't spin out
Check to see if No Spin is selected…with the Spin button.
These are the biggest piece of shit known to man. And Maytag customer support is a joke. They said in a letter that they couldn’t locate and repair technicians in my area. Good lord there are dozens of them!
Thank you!
Piece of crap! Bought in 2021..started having problems four months later! Never again Maytag!!
Mine is junk after just under 3 years!
Terrible machine .2 times complete key pad and board replaced. Don't buy this machine.
Me to. It is a piece of crap for sure.
Es una basura, 12 meses y ya no funciona