A HUGE thank you for this. I was able to fix my washing machine easily following your video and EXCELLENT instructions. I was widowed 7 months ago. My husband was the ultimate fix-it guy. So, videos like this are so helpful. Thank you, thank you, thank you.
@@DuctTapeMechanicGreat demo on motor replacement, how to check if it w/o substituting w/new? My motor works (intermittently) , so I suspect the PCB. Cheers, love all Ur vids.
You are awesome! My shifter actuator was not broken but just got dislodged from the motor, reconnected it then fixed for free! Thanks man! More power to you!
I've done heating and air conditioning plumbing for most of my working days, I got into small appliance repair due to the demand,man thank you for taking your time to do this video.. Your freaking awesome...🎉🎉🎉🎉
Bless you brother. Best repair video ever. Fast. Thorough. Well-lit and filmed. Concise. Even give the socket size. I lose ten minutes just trying to find the right one on every job. Great Job!
It is actually registering the amount of resistance/current draw it takes to turn the tub to determine the amount/weight of clothing in the tub to determine the amount of water to dispense and wash time. But a great video. I should have made videos for the 15 years I owned an appliance business but thankfully you are to help people.
Excellent instruction video!!! I've watched over a dozen videos on washer repair & yours are by far the best, most concise, specific, easiest to understand, & most simplistic to execute! Outstanding instruction! Thanks!
I have a mvwx655dw1, it was stuck on spinning or wash. Diagnostic mode shown no errors, but it helped me to realize that shifter and agitation works just fine, but left me puzzled on the root cause. I figured out that if I switch to HOT water, the machine gets it during sensing but still gets stuck. Then I saw a post from one guy saying that cold inlet valve actually has 2 solenoids, one for the detergent dispenser and one just for cold water. It ringed a bell and I immediately thought that diagnostics mode may have checked one, but not the other. I simply bought and replaced cold inlet valve and now it works! Of course if you are an expert in multimeter you can simply check the solenoids, but for me it was: if valve doesn't help, I'll buy a new washer! Glad, it worked, lol. All in all maytag bravos maintainability is not good. Mine is 7 years, disassembling drum to check drainage was a pita, replaced suspension rods (became much better during spin), now replaced cold inlet valve. Wonder what happens next. Thanks for video btw.
Thank you!! You are a washing machine God!!😂 Mine started doing this and I took the cover off the bottom and the belt was off!!! Working great 👍 thanks
Thank you so much for posting this video and showing what maybe the problem I was judt so upset thinking I had to buy me a whole washer. I thought I did something wrong when watching your other video on replacing the shifter 😅
I hate that rotten companies won't make a simple machine that simply has a start and stop switch. The more sophisticated they get the worse they are. All it needs to wash clothes is a start and stop button, anything else is bullshit.
Hi you were one of the best with the most discriptive videos I’ve come across but I do have the exact same washer but mine stopped it’s cycles and the lid lock switch was locked when my daughter tried to take the clothes out my son told me when she told him he tried to open the lock by pushing the lock mechanism open but couldn’t get it so I don’t know if that also mess up the slide part of the lock I have not replaced that but the first thing I did replace was the switch lock which the light was blinking before I opened the back up to get the washer lid open after replacing the switch lock it didn’t seem to make a difference so I replaced the shift actuator and it still didn’t fix it. So I bought a new hub because another video said that it may be stripped and slipping underneath but when I got it off it didn’t look perfect so I bought another one but didn’t put it on yet because it didn’t look like the part/shaft under there was moving I did pull the motor and try to test the ohm resistance but it seemed to have good values according to another video I did return/exchange the first new switch lock and get another one put that in and still no luck. The lock does not lock still I hope you have an answer for me hopefully an easy and cheap one thanks
I changed the shift actuator and inlet valves. It goes through every cycle during the automatic test mode. No lights come on during diagnosis mode. However, when it starts a load it doesn't sense. It fills with water then drains it all out. I've calibrated it as well. The pressure switch hose is clear with no leaks.
The only other thing I can think of is that the pressor sensor on the board is not working. At that point, you may want to decide if it is worth it (if it helps, I have found a lot of good boards on eBay for cheap)
Question for ya. We have a whirlpool that blinks sensing and the lid lock will lock but doesn’t move from there. Do you think it is the lid latch assembly if it’s locking or something else?
Hi! mine won't go to diagnostic mode and stays only on sensing mode. I see two issues as per researched and videos related. The Shift actuator or control board. Please give me your feedback and ideas if I'm correct.
I bought a deep fill maytag top load washer but it seems like its always in HE eco mode and doesn't fill up, it uses as little water as a front load washer. I have tried the max level and waited untill it stopped adding water to check water level which is about 1/4 of the tub. Any suggestions would be appreciated. Thanks
Great Video. Thank You. I have a Maytag that I changed Washer Drive Hub Kit. Instruction Sheet says I should Recalibrate Machine. I can not get it into that mode so I just ran washer and it is working. Any advice? Thank You Again.
Recalibration mode is the same as diagnostic mode, except you just keep going until the "rinse" light is lit up and hit play. Honestly, if you can't figure it out it's most likely okay. You really didn't replace any electronic components, so it shouldn't require a recalibration.
Great video!!! I reset my Maytag Bravos, it seems to go through all of the cycles now, but there's a clicking during the wash and rinse cycles. No clicking during the spin and draining, assuming not a belt issue. Any ideas/suggestions would be greatly appreciated!
My Whirlpool stuck in sensing mold if I select wash mold, but It draw water, spin and drain if I manually choose soak,Drain&spin molds.what’s my problem? The actuator?
Hi, my whirlpool washer , it start filling water later it's showing wash light green, and lid locked showin red, but it doesn't washing. What's the problem it now.
That's excellent thank you! I have a 2023 Maytag MVW4505MW that appears to be in sensing mode. It wont fill with water, I have tried all the knob positions I could find on YT positions to get into diag mode but none work I cant get the all the lights to come on. Sensing light keeps coming on. The issue is I turn it on and no water is incoming just silence and about 20 seconds later loud clunk. So its one of your #5's lol.
I have reset and recalibrated my Whirlpool. It works everytime but it only last a a load or two. What could that be since it does not seem to be a broken actuator or valves as it works well once recalibrated.?
My Maytag washer MVWC6ESWW1 has an automatic water level control combined into the temperature control. I found water all over the floor once and when I looked inside it was only half full and could not see any water leaking anywhere. I tried it again and it didn't spill any water through the whole cycle I went through your 5 reasons for overflow, and it checked fine. When I blew air to the water level switch it did shut of the water valve but could not hear any click. I use the warm water wash and saw the hot and cold-water valves cycle off and on to make the warm water and worked fine. Could a water valve have a random sticking problem or is there something else to check or you think it's a random problem in the water level switch because it does not click?
I just received my replacement lid lock switch from Amazon. It was in the locked position and the lid would not close upon installation and reassembly. It put it in test mode and nothing. It will not do anything. I plugged the old one back in and it is doing the same as before. So I believe I got a bad switch.
I have a question, I bought my whirlpool washer at a habitat, it washes great but the issue is, it is not sensing the level of clothes in the machine, it’s filling up the machine with water with a small amount of clothes… what do you suggest I do
Most likely, it is the actuator, but it is impossible to tell without taking a look at it or putting it in diagnostic mode. Luckily, the actuator is cheap, and it may be worth it to just replace it and see what happens.
Hi, it seems the washer fills with water and then stops there, seems to make a slight humming noise like it's trying to do something.. I was able to get it to finish everything last night play unplugging it and hitting started a few times etcetera but today it's acting up again... Do you think this might be the actuator? The lid lock also releases snd flashes....
On this particular type, the water level sensor is part of the control board. You can try replacing the water control level hose to see if that fixes the issue. That is my next step. I can put the machine in drain and spin, and the machine switches over to that mode. The tub spins, and the water drains out. But it will not switch out of the sensing mode.
What If it gets stuck when it’s time to rinse. The pump still works. Just won’t shift to the rinse cycle and soapy water stays in it ? Until you toggle around with it ?
Do you have a Facebook page or somewhere I can ask you a question. I have a Whirlpool that does all the cycles however at spin it spins ...all water is drained, you can hear the drum coming to an end but it goes back to spin and won't skip to Done. I already bought and installed new timer and it didn't fix problem. Any suggestions?
My Kenmore series 400 fills with water then agitates and begins to wash. It washes for a few seconds only to pause and fill with water again. It repeats these ateps and doesn't stop.
I replaced the shifter actuator its still doing the same thing.. i had a question, i made sure i matched the number on the one on amazon and they still sent me on with a different number seems to be exaclty the same. Will that cause it not to work? And also how do i recalibrate it?
My maytag is stuck on sensing automatic test passed calibration passed I replaced the shifter actuator and recalibrate. I had no error codes before or after replacement rise works drain and fill works but when in any of the wash modes no water is added tub rotates a few times the stops and sensing stays lit up. Diagnostic mode the sensing light just flashes. I think the control board is bad but I'm not sure.
I replaced my shift actuator a few months ago and it worked fine. Now it is stuck in sensing mode again. I can hear clicking underneath. Is it possible it went out again? It won't even run the diagnostic
My machine will spin up once but doesn't add any water. From there, it gets stuck. So does that mean the motor and rpm sensor is ok, and it would be valve or control panel?
@DuctTapeMechanic I am getting E7F1 erorr and after changing the agitator now, it stays on sensing mode, makes some humming noise, and comes back to lid light blinking. Tried diagnosis again and couldnt finish it i guess, it stucks with blinking lid light. Please guide. What could be the potential fix? Thanks.
Hello, I have this washer on your video. I just replaced the door lock switch. I am getting no power. The only thing lit up is the green light. Behind the control board, there are no display lights. Please help. Thanks......
I have a Whirlpool top loader washer and while washing, we tripped the breaker with 2 vacuum cleaners operating. The washer turns on, but there are no lights to indicate the cycle. The machine doesn't lock. Any help would be appreciated.
Do you ever come out to fix them we are not able to work on them what would you charge to come out here to fix it we live at 357 market Street n.e. Charleston. Tn.
I've got a problem with my whirlpool Cabrio...i need help...it washes and everything...just when its doing the last spin and stops, it won't shut off on its own...if i dont remove the clothes, it will start all cycles al over again....is this normal???
Hello i have a GE with pause button I have to blow air in the transparent tube and insert a tooth pick where its connected at the back bottom of the machine can someone let me know of they have an idea? thx
This video is great but there is one more important thing to try. It's the easiest and the cheapest. If it's running with no lights at all and no water. Try this first. Let it run for 15 minutes. I tried to fill it with water before adding the clothes so I could soak them per Oxi Clean instructions. It worked fine. But on the next load when I tried it again the auto fill sensor was confused. This triggers a safety function to avoid flooding. After 15 running with no lights or water, just the pump running, the machine shut off and is working fine. Occam's razor.
I have a whirlpool top load washer that is only 2 years old and the other day I noticed a screeching noise while the washer was on the spin cycle and now the washer will fill but it will not switch into the wash or spin cycle all it will do is sense and then after a few minutes the green lights go off and the washer drains but it does not wash them or spin them out. I am trying to determine the problem and I am not good and fixing appliances. Lol! Please help???
I performed the Diagnostic Mode on my Maytag washer (twice to be sure) and both times the only light flashing is the sensing light (all the way to the left) which is the “F” code. Since there are no other flashing lights, I’m trying to figure out what that finding indicates. Any suggestions? Thanks for any help!
Never mind… 🤣 Turns out that a road crew hit a water line so the water was turned off on our street! I have saved your video and will refer to it if/when my washer ever malfunctions. Thanks! 😊
I would definitely swap it with a different one. Unfortunately most of the other brands have there own issues as well (especially GE). I would try my luck with another WP
My brand new whirlpool washer would not move past sensing mode. Customer Service gave me this trick: First cancel the load, then Press Start, Press it again and Hold 3 seconds. My machine then ran a wash cycle. Pretty ridiculous to have to do this, but it worked for me.
Ok I put the machine in test mode, and it was fine, then in Manual mode, everything fine, but when I tried to run it , the sensing light come on and it does nothing, I put a lid lock, Actuator, and cam,...nothing! Only work right when in test mode..must be a bad board 😢, so I'm I right? Oh the water valve work fine.
There are really only two types of whirlpool actuators a red one and a black one. The back one is more common (part number W10913953). Both are available on Amazon
For sure buy a used non-governmental appliance that actually cleans clothes! Lots less money than the over-regulated computerized hi dollar stuff they are trying to sell now! I bought an old school washer yesterday and am having my old washer refurbished. Talk about going green!
What if its stuck in sensing but the lock light doesnt come on at all. Also wheb I try to recalibrate it the start button seems to not be doing anything
A HUGE thank you for this. I was able to fix my washing machine easily following your video and EXCELLENT instructions. I was widowed 7 months ago. My husband was the ultimate fix-it guy. So, videos like this are so helpful. Thank you, thank you, thank you.
Sad to hear about your husband. It's comments like these that keep me going!
@@DuctTapeMechanicGreat demo on motor replacement, how to check if it w/o substituting w/new? My motor works (intermittently) , so I suspect the PCB. Cheers, love all Ur vids.
You are awesome! My shifter actuator was not broken but just got dislodged from the motor, reconnected it then fixed for free! Thanks man! More power to you!
I've done heating and air conditioning plumbing for most of my working days, I got into small appliance repair due to the demand,man thank you for taking your time to do this video.. Your freaking awesome...🎉🎉🎉🎉
Appreciate the kind words! Yes, the demand for used appliances is very high! Best of luck!
Bless you brother. Best repair video ever. Fast. Thorough. Well-lit and filmed. Concise. Even give the socket size. I lose ten minutes just trying to find the right one on every job. Great Job!
Appreciate the support!
It is actually registering the amount of resistance/current draw it takes to turn the tub to determine the amount/weight of clothing in the tub to determine the amount of water to dispense and wash time. But a great video. I should have made videos for the 15 years I owned an appliance business but thankfully you are to help people.
Excellent instruction video!!! I've watched over a dozen videos on washer repair & yours are by far the best, most concise, specific, easiest to understand, & most simplistic to execute! Outstanding instruction! Thanks!
Where's your shifter actuator trouble shoot diagnosis video?
Thank you! I appreciate the kind words!
Thank you, Thank You Thank you, you are making us more efficient and taking us out of the ignorance zone.
God bless you young man
Your welcome! I appreciate the kind words. God bless you as well!
I have a mvwx655dw1, it was stuck on spinning or wash. Diagnostic mode shown no errors, but it helped me to realize that shifter and agitation works just fine, but left me puzzled on the root cause.
I figured out that if I switch to HOT water, the machine gets it during sensing but still gets stuck.
Then I saw a post from one guy saying that cold inlet valve actually has 2 solenoids, one for the detergent dispenser and one just for cold water. It ringed a bell and I immediately thought that diagnostics mode may have checked one, but not the other.
I simply bought and replaced cold inlet valve and now it works!
Of course if you are an expert in multimeter you can simply check the solenoids, but for me it was: if valve doesn't help, I'll buy a new washer! Glad, it worked, lol.
All in all maytag bravos maintainability is not good.
Mine is 7 years, disassembling drum to check drainage was a pita, replaced suspension rods (became much better during spin), now replaced cold inlet valve. Wonder what happens next.
Thanks for video btw.
Thank you!! You are a washing machine God!!😂 Mine started doing this and I took the cover off the bottom and the belt was off!!! Working great 👍 thanks
Thank you so much for posting this video and showing what maybe the problem I was judt so upset thinking I had to buy me a whole washer. I thought I did something wrong when watching your other video on replacing the shifter 😅
I hate that rotten companies won't make a simple machine that simply has a start and stop switch. The more sophisticated they get the worse they are. All it needs to wash clothes is a start and stop button, anything else is bullshit.
Great video, thank you very much. It was simply the belt came off when my wife overloaded the washer with a blanket.
Awesome! Glad I could help!
Wouldnt it not spin if it was the belt?
Thanks, I took a chance and replaced the Shifter / Actuator and it fixed my problem
It is usually the issue lol
Was your washer not spinning? also did it not spin fast?
Thanks
Same!
EXCELLENT instructions, never seen anything this great on any web site
Appliance the kind words!
Brotha, great video. The details walk through is excellent 👏🏼👏🏼👏🏼
Thank you!
Excellent video with great instructions. Thanks for sharing and helping us to save. Blessings on you and yours
Glad it was helpful!
Thank you.. it was the cold side cylinoid.. so I can run the wash on hot until the part gets here
Hi you were one of the best with the most discriptive videos I’ve come across but I do have the exact same washer but mine stopped it’s cycles and the lid lock switch was locked when my daughter tried to take the clothes out my son told me when she told him he tried to open the lock by pushing the lock mechanism open but couldn’t get it so I don’t know if that also mess up the slide part of the lock I have not replaced that but the first thing I did replace was the switch lock which the light was blinking before I opened the back up to get the washer lid open after replacing the switch lock it didn’t seem to make a difference so I replaced the shift actuator and it still didn’t fix it. So I bought a new hub because another video said that it may be stripped and slipping underneath but when I got it off it didn’t look perfect so I bought another one but didn’t put it on yet because it didn’t look like the part/shaft under there was moving I did pull the motor and try to test the ohm resistance but it seemed to have good values according to another video I did return/exchange the first new switch lock and get another one put that in and still no luck. The lock does not lock still I hope you have an answer for me hopefully an easy and cheap one thanks
I changed the shift actuator and inlet valves. It goes through every cycle during the automatic test mode. No lights come on during diagnosis mode. However, when it starts a load it doesn't sense. It fills with water then drains it all out. I've calibrated it as well. The pressure switch hose is clear with no leaks.
The only other thing I can think of is that the pressor sensor on the board is not working. At that point, you may want to decide if it is worth it (if it helps, I have found a lot of good boards on eBay for cheap)
@@DuctTapeMechanic ok. Thanks brother.
Question for ya. We have a whirlpool that blinks sensing and the lid lock will lock but doesn’t move from there. Do you think it is the lid latch assembly if it’s locking or something else?
I would say if the lid lock mechanism locks and unlocks it is probably fine. Does it fill with water?
@@DuctTapeMechanic no it won’t fill
I’m having the exact same problem so i would like to know tooo
Same here, but mine fills with water. I can manually advance it thru modes by hitting the start/stop button
What would cause the shifter to break after one week? It will spin but the agitation mode is very weak.
Thank you I'm a widow and everything is going out. My heat my air my dryer my washer. This was a very good video for me I could do it myself.
It was supposed to say I wish I could do it myself but I can't
I didn't open the water all the way and that was my problem.😂 thank man apriciate your help
Easy peasy!
Hi! mine won't go to diagnostic mode and stays only on sensing mode. I see two issues as per researched and videos related. The Shift actuator or control board. Please give me your feedback and ideas if I'm correct.
I bought a deep fill maytag top load washer but it seems like its always in HE eco mode and doesn't fill up, it uses as little water as a front load washer. I have tried the max level and waited untill it stopped adding water to check water level which is about 1/4 of the tub. Any suggestions would be appreciated. Thanks
Great Video. Thank You. I have a Maytag that I changed Washer Drive Hub Kit. Instruction Sheet says I should Recalibrate Machine. I can not get it into that mode so I just ran washer and it is working. Any advice? Thank You Again.
Recalibration mode is the same as diagnostic mode, except you just keep going until the "rinse" light is lit up and hit play. Honestly, if you can't figure it out it's most likely okay. You really didn't replace any electronic components, so it shouldn't require a recalibration.
Great video!!!
I reset my Maytag Bravos, it seems to go through all of the cycles now, but there's a clicking during the wash and rinse cycles. No clicking during the spin and draining, assuming not a belt issue. Any ideas/suggestions would be greatly appreciated!
Did you ever find out cause?
My Whirlpool stuck in sensing mold if I select wash mold, but It draw water, spin and drain if I manually choose soak,Drain&spin molds.what’s my problem? The actuator?
Thank you for making this helpful video - saved our family some $ 🙏🏼
Glad to help!
Hi, my whirlpool washer , it start filling water later it's showing wash light green, and lid locked showin red, but it doesn't washing. What's the problem it now.
That's excellent thank you! I have a 2023 Maytag MVW4505MW that appears to be in sensing mode. It wont fill with water, I have tried all the knob positions I could find on YT positions to get into diag mode but none work I cant get the all the lights to come on. Sensing light keeps coming on. The issue is I turn it on and no water is incoming just silence and about 20 seconds later loud clunk. So its one of your #5's lol.
Best of luck!
I have reset and recalibrated my Whirlpool. It works everytime but it only last a a load or two. What could that be since it does not seem to be a broken actuator or valves as it works well once recalibrated.?
I'm having the same issue with my whirlpool. Did you figure out the problem?
My Maytag washer MVWC6ESWW1 has an automatic water level control combined into the temperature control. I found water all over the floor once and when I looked inside it was only half full and could not see any water leaking anywhere. I tried it again and it didn't spill any water through the whole cycle I went through your 5 reasons for overflow, and it checked fine. When I blew air to the water level switch it did shut of the water valve but could not hear any click. I use the warm water wash and saw the hot and cold-water valves cycle off and on to make the warm water and worked fine. Could a water valve have a random sticking problem or is there something else to check or you think it's a random problem in the water level switch because it does not click?
I just received my replacement lid lock switch from Amazon. It was in the locked position and the lid would not close upon installation and reassembly. It put it in test mode and nothing. It will not do anything. I plugged the old one back in and it is doing the same as before. So I believe I got a bad switch.
How about the main locking switch being broken?
Can you tell us what noise if any it might make ...like no noise bad valves or no movement but water bad motor etc.
I have a question, I bought my whirlpool washer at a habitat, it washes great but the issue is, it is not sensing the level of clothes in the machine, it’s filling up the machine with water with a small amount of clothes… what do you suggest I do
Appreciate your informative videos.
Thank you sir!
What about machines that stay stuck on wash but doesnt spin or advance to the next step? Should I check the actuator for that issue too?
Most likely, it is the actuator, but it is impossible to tell without taking a look at it or putting it in diagnostic mode. Luckily, the actuator is cheap, and it may be worth it to just replace it and see what happens.
@DuctTapeMechanic thanks for the quick reply 🙏
Best video. Simple explanations help a lot.
I have a new GE washer in my new apartment and the problem was with the LID sensor and wouldn't go to the spin cycle
Wow!! A few screws?? My water level sensing isn't working. No matter amount of clothes, it fills completely!
Pressure switch or ?
Hi, it seems the washer fills with water and then stops there, seems to make a slight humming noise like it's trying to do something.. I was able to get it to finish everything last night play unplugging it and hitting started a few times etcetera but today it's acting up again...
Do you think this might be the actuator? The lid lock also releases snd flashes....
Very informative but if my washer mother board is out i mind as well buy a new one. Just my preference
Yes sometimes that is the best choice!
Most used washers can sell for approx $200, and the part may cost $250.00. If you can't fix it with a low cost part it may be time to junk it.
After changing out the shift actuator the sense error persisted. Changed out the water valves and now it's working just fine.
Nice! Good work!
Could the water level sensor not also be the problem?
On this particular type, the water level sensor is part of the control board. You can try replacing the water control level hose to see if that fixes the issue. That is my next step. I can put the machine in drain and spin, and the machine switches over to that mode. The tub spins, and the water drains out. But it will not switch out of the sensing mode.
What If it gets stuck when it’s time to rinse. The pump still works. Just won’t shift to the rinse cycle and soapy water stays in it ? Until you toggle around with it ?
Do you have a Facebook page or somewhere I can ask you a question.
I have a Whirlpool that does all the cycles however at spin it spins ...all water is drained, you can hear the drum coming to an end but it goes back to spin and won't skip to Done. I already bought and installed new timer and it didn't fix problem. Any suggestions?
anything on how to fix the door lock?
My Kenmore series 400 fills with water then agitates and begins to wash. It washes for a few seconds only to pause and fill with water again. It repeats these ateps and doesn't stop.
What do we do for a bad control board
What would cause that little arm on the actuator to disconnect mid cycle?
I replaced the shifter actuator its still doing the same thing.. i had a question, i made sure i matched the number on the one on amazon and they still sent me on with a different number seems to be exaclty the same. Will that cause it not to work? And also how do i recalibrate it?
I'm having the same exact issue now. Did you ever figure it out?
Any solution, guys? Facing the same even after changing actuator.😊
Thank you, this helped me!
Awesome! Glad to help!
Excellent video!!
My maytag is stuck on sensing automatic test passed calibration passed I replaced the shifter actuator and recalibrate. I had no error codes before or after replacement rise works drain and fill works but when in any of the wash modes no water is added tub rotates a few times the stops and sensing stays lit up. Diagnostic mode the sensing light just flashes. I think the control board is bad but I'm not sure.
All I did was tap with a screw driver at bottom everywhere and it work. Moved belt and it worked
I replaced my shift actuator a few months ago and it worked fine. Now it is stuck in sensing mode again. I can hear clicking underneath. Is it possible it went out again? It won't even run the diagnostic
It quite possible it went out again. Perhaps try replacing it with an OEM part. Also make sure the clutch moves up and down freely
My machine will spin up once but doesn't add any water. From there, it gets stuck. So does that mean the motor and rpm sensor is ok, and it would be valve or control panel?
maytag 2000 series wont spin in normal wash but it has no problem on rinse and spin?
This was very helpful thank you very much 😊
You're welcome!
@DuctTapeMechanic I am getting E7F1 erorr and after changing the agitator now, it stays on sensing mode, makes some humming noise, and comes back to lid light blinking.
Tried diagnosis again and couldnt finish it i guess, it stucks with blinking lid light. Please guide.
What could be the potential fix? Thanks.
Thank you for everything.
Your welcome!
Hello, I have this washer on your video. I just replaced the door lock switch. I am getting no power. The only thing lit up is the green light. Behind the control board, there are no display lights. Please help. Thanks......
I have a Whirlpool top loader washer and while washing, we tripped the breaker with 2 vacuum cleaners operating. The washer turns on, but there are no lights to indicate the cycle. The machine doesn't lock. Any help would be appreciated.
Do you ever come out to fix them we are not able to work on them what would you charge to come out here to fix it we live at 357 market Street n.e. Charleston. Tn.
Whats going on if my washer while on sink will not switch to the wash cycle instead it spins my water out but will complete all the other cycles?
Hello what’s about the problem with the lid lock ??? Blinking
Most likely lid lock mechanism broken
Fantastic video, really man.
Appreciate the support!
I've got a problem with my whirlpool Cabrio...i need help...it washes and everything...just when its doing the last spin and stops, it won't shut off on its own...if i dont remove the clothes, it will start all cycles al over again....is this normal???
Hello
i have a GE with pause button
I have to blow air in the transparent tube and insert a tooth pick where its connected at the back bottom of the machine
can someone let me know of they have an idea?
thx
This video is great but there is one more important thing to try. It's the easiest and the cheapest. If it's running with no lights at all and no water. Try this first. Let it run for 15 minutes. I tried to fill it with water before adding the clothes so I could soak them per Oxi Clean instructions. It worked fine. But on the next load when I tried it again the auto fill sensor was confused. This triggers a safety function to avoid flooding. After 15 running with no lights or water, just the pump running, the machine shut off and is working fine. Occam's razor.
Awesome great job on the fix!
I have a whirlpool and its stuck in sensing also it bade a buzzing sound?
My washer started spitting out mounds of dirt. Is there a reason why?
Im in trinidad and these parys are really expensive rods are $625 actuator $385 yeah
I have a whirlpool top load washer that is only 2 years old and the other day I noticed a screeching noise while the washer was on the spin cycle and now the washer will fill but it will not switch into the wash or spin cycle all it will do is sense and then after a few minutes the green lights go off and the washer drains but it does not wash them or spin them out. I am trying to determine the problem and I am not good and fixing appliances. Lol! Please help???
Screeching noise is a bit odd but you may want look at the clutch/shifter actuator
I performed the Diagnostic Mode on my Maytag washer (twice to be sure) and both times the only light flashing is the sensing light (all the way to the left) which is the “F” code. Since there are no other flashing lights, I’m trying to figure out what that finding indicates. Any suggestions? Thanks for any help!
Never mind… 🤣 Turns out that a road crew hit a water line so the water was turned off on our street! I have saved your video and will refer to it if/when my washer ever malfunctions. Thanks! 😊
Brand new WP, all these issues and finding new ones (cant make it STOP)...should exchange with another brand? Thanks
I would definitely swap it with a different one. Unfortunately most of the other brands have there own issues as well (especially GE). I would try my luck with another WP
I have this whirlpool, so where is the lint filter I’m guessing that’s what it’s called and how do I clean it ect?
No lint filter on a washer
I have a whirlpool 14 kg top load washer changed the rods and actuator now machine wont fill it does nothing 😮 pls help im in trouble
My whirlpool washer will only fill water and agitate in spin rinse mode. Will not fill in sensing mode. Any ideas? Thanks
My brand new whirlpool washer would not move past sensing mode. Customer Service gave me this trick: First cancel the load, then Press Start, Press it again and Hold 3 seconds. My machine then ran a wash cycle. Pretty ridiculous to have to do this, but it worked for me.
How do you know if the load sensor is bad ?
Ok I put the machine in test mode, and it was fine, then in Manual mode, everything fine, but when I tried to run it , the sensing light come on and it does nothing, I put a lid lock, Actuator, and cam,...nothing! Only work right when in test mode..must be a bad board 😢, so I'm I right? Oh the water valve work fine.
My washer won’t agitate in heavy and regular mode, but it will agitate in casual mode, do you have any idea what the problem could be ? Thanks
Very strange.... I would replace mode shifter and see if the clutch is not sticky
@@DuctTapeMechanic thank you so much , I’ll try that !
I have a question the washer won't start everytime I press the start button it blinks twice and won't do anything can you please help me with that?
Thank you 🙏
I have a Hotpoint washer model number HTW240ASK6W WHEN I PUT THE START BUTTON what is the problem it never moves from soak
Sounds like a bad lid lock mechanism
Thank you , good job
Help, i cant get machine to get in recalibrate or diagnose mode. Rob Longo
I have this same machine and mines won’t even start the lock keeps clicking and the sensing button just blinks
When did he hit the start button twice?
How do you find the code translations? I am getting sensing, rinse, spin, done. Done.
I made a video detailing how to translate the code into an alpha numerical value
Where is the part # on the ACTUATOR ?
There are really only two types of whirlpool actuators a red one and a black one. The back one is more common (part number W10913953). Both are available on Amazon
Are you in what city
I recently got a whirlpool washer whichis better then the samsung that was junk
I agree!
For sure buy a used non-governmental appliance that actually cleans clothes! Lots less money than the
over-regulated computerized hi dollar stuff they are trying to sell now! I bought an old school washer yesterday and am having my old washer refurbished. Talk about going green!
What if its stuck in sensing but the lock light doesnt come on at all. Also wheb I try to recalibrate it the start button seems to not be doing anything
did you figure out the issue? mine also will get stuck in sensing and my lid lock light doesn’t come on. but it will come on the drain and spin cycle
@CheerbyKrystin no I haven't. I ripped it all apart but couldn't figure anything out I still have no idea. So let me know if you figure it out
My whirlpool cabrio starts fine but won't switch from wash the next cycle
Moat is likely it's the magnetic clutch that is bad
@DuctTapeMechanic thanks for the info, next question is how do you fix that?
Yo u just earned a sub dwag.
Thanks!
Where are U located?