ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
Hydrostatic Testing a 95-Year-Old Cylinder - Modern Diver
ฝัง
- เผยแพร่เมื่อ 14 ส.ค. 2024
- Performing a Hydrostatic test on a ICC-3A 2015psi Cylinder!
I am a qualified Transport Canada registered Hydrostatic Technician working for Dan's Dive Shop in St Catharines, Ontario. Do not perform pressure tests without proper equipment and training.
#moderndiver #hydrotest #cylinders
--------------------------------------------------------------------------------------------------------------------------
To learn more about the Modern Diver Channel check out our website and Linktree!
moderndiverchannel.com
linktr.ee/Mode...
Or one of our social media platforms!
Tiktok @moderndiver
Instagram @modern_diver_channel
Twitter @moderndiver
Hit that subscribe button to follow along and Ill see you guys underwater!
Im in school for respiratory and i thought this video was pretty cool! Thank you
this tank will probably out live us all
😂
I still don't understand how the process works. The tank is filled with water and submerged in another sealed tank but from there, I don't know where the pressure is applied. Is it possible to show another video that explains every step of the way? Or can you recommend a video that shows how all this works?
Alec Peirce has a good video on the process:
th-cam.com/video/lVYeFPhX1OE/w-d-xo.htmlsi=2pQtphpYGmMxp7ny
Tank pressurized, it expands and forces water out of the test chamber.
That water is collected, volume measured (159 in this video).
Then pressure released, that excess water is sucked back into the test chamber and what's left it measured (3 in this video).
Cool video man! Wondering if you think that ultrasonic testing will take over from hydrostatic. Considering it is faster and more accurate, and no removal of the valve or emptying of the cylinder required
I've hydo tested a LPG tank from 1928 haha
Very cool video 👍🖖
What did you stamp on the cylinder???
You talking about the Swaztika? I saw that too lmao
Very cool video
whta is the name of the gauge to check the surface rust and how do you used that? how deep should the pitting rust be that will result to it failing. what will happen to cylinfer if it failed the hydro test.? how important is the water jaket?coz here in the philipines we dont use those.
Super cool! Did you restored?
What cylinder clamp are you using to remove the valve?
Can you do a shop tour?
hi im writing from chile nice video I have my own hydrotest , i would like to know more info about digital pressure manometer and where can I buy one. How do you get the calibration? thank you
Those are called pressure transducers, in my country we have to recertify them every year by an independent company.
Hydrotesting is the single most damaging process you could do to these cylinders. Water and steel, not properly drying it on the inside. Add oxygen from the air, and there goes your tank.
If you just kept it dry... pretty much all tanks would last 100 years.
2Q. are the test to be different if cylinder use oxygen or nitrogen gas
No, doesnt matter the gas as long as you keep the work pressure
Why percentage 1.8 is meaning pass what we doing if result become 2 or 4
All 3 series cylinders have a 10% margin.
🌹🌹🌹🌹🌹
Shouldn't you let the water stabilize for 8 hours at least??I'm pretty sure the water inside the cylinder should be at room temperature before it gets hydrotested. And its a cylinder not a tank.
I bought one at an estate sale for $20 bucks are they worth anything
I wanted to exchange it for a full aluminum to use