I'm sure he's going to dip it again and get everything else that's why he doesn't waist to much time in one spot or the rest of it will be harder to remove
Probably a southwest USA car. But idk what country this is in. Only surface rust. Trust me, if you plan on buying a used car, make sure you go to AZ or south CA to get it. Surface rust only, the rest is solid steel
Restoring an old classic from scratch is the most painstaking and tedious and frustrating project you could ever imagine. I did a couple when I was young but never again. Sometimes these cars become lifetime projects that never get done.
'Heart as big as a football' as a well known UK classic car trader says. Some love it and get more out of restoring than driving them. I hate bodywork, I'm no good at it. I'm now too lazy to even polish my plastic headlights, let alone taking cylinder heads off. Not so bad once you've started, it's just getting started...
We use nozzles like this for hydrovac excavation at work. That high pressure spinning nozzle can pierce your skin and I got thumped in the ballsack once. It's was not enjoyable.
Aparentemente estava mergulhado em alguma solução química para remoção da tinta e oxidação e foi içado com auxílio das correntes ainda presas nele. A água pressurizada fez o resto do trabalho. Carroceria em excelente estado!
Had a stressful busy day and was filling out end of day inspection and turned this on and ended up watching it probably a dozen times over and over and realized how relaxing it was. Thanks. Almost went over 14 hour clock though staring at this and not finishing inspection and logging out. Why did you let yourself go onto violation? Oh theres this great video.....
Just wondering.....after its been pressure washed and theres still paint etc on the body thats not been removed, does it go back in for a 2nd dip to get everything off, or can you only dip the body once???
Additive chemichals in the water. A home trick for freshly paintstripped steel is a wash with 50/50 water and lemon juice- gives the steel a green tinge but wont flash rust. Once it has coated the steel thoroughly you can rinse with clean water so its not sticky!
That's the problem with this method. All the areas you can't see in-between joints etc will turn into rust infestations in no time. Body should be immediately washed, rinsed and the whole thing immersed in a bath of suitable corrosion inhibitor as did the auto and steel manufactures of the day.
@@rossbrumby1957wait so you wash it with the 50/50 mix let it dry for a few days then wash it and the barrier remains?so it's a reaction with the acid in the lemon juice creating a permanent film type thing is that what's happening
Washing away all the value. Restored patina paint is so amazing. I saw a basic 57 Chevy sold for $140k U.S. because it had restored patina paint. It takes nature decades to create that, and half a day for some idiot to destroy it.
How did you get the paint to come off so easily? I am about to strip my C10 and I have used a 4k psi with a turbo Nozzle in the last and didn't get these kind of results
it’s always pleasant to see the chemical and physical process powerfull effect. But I am scarred about the consequences on environment. Chemical solvants have the reputation of being carcinogenic….
I was waiting for the lumps of filler, chicken wire and wads of newspaper to fall out of the sills, but apparently this isn't a British market MkII Jaguar! 🇬🇧 It looks in great condition. 👍 Is this in the US? 🇺🇸
My friend would use a pressure washer to strip concrete from steel Reo cages installed inside slabs walls and pillions in order to repair the cages.unbelivable seeing concrete wash away
![[TH]FFWS SEA Spring 2024 Knockout Stage - Day 11](http://i.ytimg.com/vi/Qr0L1ab9dLE/mqdefault.jpg)
![[LIVE] BABYMONSTER(베이비몬스터) - SHEESH | 두시탈출 컬투쇼](http://i.ytimg.com/vi/6q-_9s6a_1g/mqdefault.jpg)
Как приятно смотреть когда люди создают, а не разрушают.
restauração amigo.
Да все верно 😂😂😂😂
Именно сейчас он разрушает ЛКП 😂
@@user-anybis parece-me que sim, parabéns!!
Скоро не будит ни где Государство, потому что, кроме вреда оно нечего не переносит
Это после кислота моют, не думайте керхер такой мощный. Посмотрите полностью ролик, как делается.
Qual ácido??
А я думал -вот мощь вот шайтан аппарат😂
Bain d'acide ☝️voiture chauffante ♨️👍
Ddddddrdrrddrrrrrrrddddddddddrdddddrdrdddrddrddddrrdrrdddrrrrdrddddddddddddd
@@rudidarsawarsa6866 Ageuhhhh.!
Go back for that spot underneath the passenger headlamp, “YOUR KILLIN ME”!!!!
😂
He’s moving so fast he’s missing a bunch.
Dudes.. he is trying to get most of this stuff before it gets hard.. he'll go back for spots.. relax..
I'm sure he's going to dip it again and get everything else that's why he doesn't waist to much time in one spot or the rest of it will be harder to remove
A Jag that isn't eaten away with rust is a minor miracle.
this comment hurts me because i had a jag that died from exactly that....
Probably a southwest USA car. But idk what country this is in. Only surface rust. Trust me, if you plan on buying a used car, make sure you go to AZ or south CA to get it. Surface rust only, the rest is solid steel
was gonna say if that was my Alfa, wouldn't be much left
I’m sure the acid wash got a lot of the rust
Это не в Израиле случайно?
페인트 리무버는 매우 강력한 발암물질 입니다. 깨끚하고 시원하게 벗겨지지만 사용자는 각별히 조심해서 사용해야 합니다.
Restoring an old classic from scratch is the most painstaking and tedious and frustrating project you could ever imagine. I did a couple when I was young but never again. Sometimes these cars become lifetime projects that never get done.
'Heart as big as a football' as a well known UK classic car trader says.
Some love it and get more out of restoring than driving them.
I hate bodywork, I'm no good at it.
I'm now too lazy to even polish my plastic headlights, let alone taking cylinder heads off.
Not so bad once you've started, it's just getting started...
That metal work is still in good condition. Impressive
Us this on a new car and the tin would be falling of like the paint on this car is,
Yeah...only about 40 hours of work and you can sell it at that huge auto auction on TV!!
😂@@ImigrentfromMars
Idk what it is about watching this but I could watch this for hours.
Same here.
Same.
I'm ready to go do my driveway now with an ice cold beer in hand. 🙂
I know. What is it, I think an ASMR thing ?
It's therapy
I think I would enjoy a job like that
The MK2 is one gorgeous car!
Yup... made out of recycled
German tanks from WW2.
Thats gonna be my next shower head!
Wash ya willy with it
How does this rank against the Commando 450 🚿 ? 😂
We use nozzles like this for hydrovac excavation at work. That high pressure spinning nozzle can pierce your skin and I got thumped in the ballsack once. It's was not enjoyable.
كم قيمة هذه الإله هل هي على الماء او
A bit of cut & polish and that’ll buff right out ! 👍🎶
Hopefully they dry quickly and then prime it, if not then they are up against a lot of rust.
There's an additive you can put in the jet washer to prevent the oxide reaction for a while.
За этим процессом можно бесконечно наблюдать!
I watch this all day lol
Good job brother GOD bless you with the project
Lead Work in that Fender, Cool !!
Aparentemente estava mergulhado em alguma solução química para remoção da tinta e oxidação e foi içado com auxílio das correntes ainda presas nele. A água pressurizada fez o resto do trabalho. Carroceria em excelente estado!
Looks clean except that little bit of lead work in the quarter lip
Working thoroughly instead of quickly saves a lot of time and effort later on.
Rotary nozzles don’t mess around.
That sheet metal is incredible!
The giant hornets were on route but never got to the target, thank god.
Wish this was around in the 1980s..Technology came a long way🤔👌
The running paint reminds me of the scene where that dude's face melted in Raiders of the lost Ark
Could be because jaguar started out as SS cars. Ever hear of an SS100? Before they were SS cars they were Swallow Sidecars.
Yes, then came Raiders of the lost Ark with all the Nazis and they changed the Factorys Name to Jaguar😊
😂
I have 37 years of bodyshop experience, but never seen anything like that 🎉 !!!
The sound of the turbo nozzle is awesome
If you have restored a car you know how satisfying this is.
これからどんなカラーでどんだけ綺麗になるのか､オーナーは楽しみだろう!!
Good stuff full video. Oh didn't forget to do behind the ears🤣
Muy buena forma de restaurar éstos automóviles qué se niegan a morir se ve qué es un auto muy bonito y fuerte
ジャガーMARK２ですね。
素敵な車です。
What pressure washer is this ?
Did you apply a chemical prior to loosen paint?
Llamarina ka shum krom shqiptar nga më i miri në rruzull madein allbenia krom .
Da bambino mi piaceva salire sulle Jaguar mk2 dei clienti di mio padre.
Le ho sempre nel cuore.❤
Had a stressful busy day and was filling out end of day inspection and turned this on and ended up watching it probably a dozen times over and over and realized how relaxing it was. Thanks. Almost went over 14 hour clock though staring at this and not finishing inspection and logging out. Why did you let yourself go onto violation? Oh theres this great video.....
Just wondering.....after its been pressure washed and theres still paint etc on the body thats not been removed, does it go back in for a 2nd dip to get everything off, or can you only dip the body once???
Лучшая работа в Мире!
And what paint stripper is on the car already
“After chemical dip”
It's ronseal
and some body putty
@@landontesar3070 yes that's ronseal aswell .it's pretty serious stuff buddy
Five watchings later, he STILL hasn't gotten to the engine bay!
Niceeee. Waiting for the full video
fascinating, is this a way to inspect for rusting before a repaint or is that just an unintended consequence of pressure washing the paint off?
They dipped it in a chemical bath with steel shot balls that remove rust.
Paint stripper before or paint remover, chemical components
Does the water with paint and whatever left over chemicals get processed or just down the drain? or into the ground?
Depends on what country your in.
This is what I needed to end wasting time on my phone and go get a good sleep. Well done sir!
Turbo nozzle on a pressure washer is a beast
How do you stop it from rusting right away?
Additive chemichals in the water. A home trick for freshly paintstripped steel is a wash with 50/50 water and lemon juice- gives the steel a green tinge but wont flash rust. Once it has coated the steel thoroughly you can rinse with clean water so its not sticky!
That's the problem with this method. All the areas you can't see in-between joints etc will turn into rust infestations in no time. Body should be immediately washed, rinsed and the whole thing immersed in a bath of suitable corrosion inhibitor as did the auto and steel manufactures of the day.
@@rossbrumby1957wait so you wash it with the 50/50 mix let it dry for a few days then wash it and the barrier remains?so it's a reaction with the acid in the lemon juice creating a permanent film type thing is that what's happening
Whoever is doing that job is doing a absolutely horrible job
Get that engine bay washed and show me!! Damn it 😂😂
Мечта любого автомаляра
Need to see the finished product please
Not going to lie this sounds relaxing😅
Good ol turbo tip 💪🏻
Давление там очень сильное,по моему под 300 атмосфер.Струеей пальцы ног отрежет запросто,через сапоги даже.Добавки +горячая вода,смывает враз.
So satisfying to watch 👍🏼
Esa decapada no la hace el agua a presión solamente. Debe haber un químico o un removedor soluble en agua.
That Jag is definitely NOT a ‘toon; wouldn’t have survived The Dip! What graceful lines this car has!
Washing away all the value.
Restored patina paint is so amazing. I saw a basic 57 Chevy sold for $140k U.S. because it had restored patina paint.
It takes nature decades to create that, and half a day for some idiot to destroy it.
that cars gonna be so cool when it’s done
How do you stop if from immediately rusting?
Sand it and then paint it quickly
Хороший Керхер, такой на мойке нужен , как хорошо моет👍
You forgot to say - at 10x actual speed
i wonder how many fish an people will get sick or die when those chemicals reach the fresh water?
Something tells me life expectancy isn't a perk of the job.
How did you get the paint to come off so easily? I am about to strip my C10 and I have used a 4k psi with a turbo Nozzle in the last and didn't get these kind of results
What kind of chemical dip did you use?
Was the car red....also for polish finish what would you use first ..
and then it starts to rust again. would be better to do this after body-repairs completed and car can go straight to paint
I was to say "Man, that's a Powerful Pressure Washer".
What chemical did you use to strip?
You missed a spot!
Love a full length roll rag roof on a mk2 jag
Looks nice
I’d swear the start of this jet washing sounded like Becky hill and chase and status DISCONNECT 😂🙌🙌
Is almost rust free....👍
That’s the dip they used in Who Framed Roger Rabbit!!!😂😂😂
Процесс реставрации становится все дороже и технологичнее.
I’m just trying to find the swarm of bees 🐝
it’s always pleasant to see the chemical and physical process powerfull effect. But I am scarred about the consequences on environment. Chemical solvants have the reputation of being carcinogenic….
When the acid bass reveals the truth
Хорошо что металл чуть-чуть осталось
Я думал последний кусок металла в 1979 закончил
I want to know is what kind of chemical you used?? that took it right off 😮
It sounds like a swarm of bees clean bees
Good work man
What kind of Chemical peel did you use first
That looks like fun job to have!
How do you stop it from flash rusting? Do y’all immediately dip it in something?
It's sprayed with a metal prep coating so it doesn't rust.
So satisfying to watch 😊
Power washed the paint right off!
Absolutely solid
Thats nuts you get to do that atleast once
How much do a Chemical dip usually run
It was acid dipped. The pressure washer is just removing what is left.
That's slicker than snot 😂
Looks like 2000 psi of water pressure
That was satisfying to watch!
Удивительно😮 нет коррозии нигде, а кузов то машины прошлых веков
That was more satisfying than a Snickers 😎
That amazing metal work for a mk2, even the floor pans look sound.
I was waiting for the lumps of filler, chicken wire and wads of newspaper to fall out of the sills, but apparently this isn't a British market MkII Jaguar! 🇬🇧
It looks in great condition. 👍 Is this in the US? 🇺🇸
Turbo tip doing what it does quickly
the car was in a bath of paint stripper first.
My friend would use a pressure washer to strip concrete from steel Reo cages installed inside slabs walls and pillions in order to repair the cages.unbelivable seeing concrete wash away
So badass . Only car guys and pressure cleaning guys know. Its satisfying