Thank you very much for the video. I watched several videos this one was the most comprehensive. I was able to change the front grill on my Yukon is well most appreciate it. 11:52
Thank you so much for this video! I was able to remove my front bumper and repair my “Active Grill Shutter” as well as install my new grill!! Thanks again bud!
When you pulled the driver side of the bumper, a black piece popped out, you showed it 3 times in your video, did that break or was that supposed to happen? Other videos says there are three 7MM screws that need to be removed, is that so or do you just pull the bumper to release? Thanks for the video, awesome work.
😅 that black piece was part of the bumper clip system, it was not supposed to break, but they fatigue and fail from time to time, it is not a big deal as the clips with the screws work together to hold the bumper on. There are several 7mm screws on this bumper and just about everywhere else on these GM vehicles, they must have gotten a really good deal on these 😅. Thank you for the feedback 👍🏾
If you wanted to do gloss black fog light covers, are those chrome ones easy to pop off? Asking for a friend lol. I want to do mine in gloss black around the two fog lights. Hoping front bumper doesn’t need to come off. Looks like they just pop in and out?
These do pop off, but you would do best removing them with the bumper cover off. Or you can wrap them in gloss black vinyl. I plan on using smoke black vinyl on these.
Thank you! This grille came from eBay. www.ebay.com/itm/For-15-20-GMC-Yukon-XL-Mesh-Front-Bumper-Hood-Upper-Grille-Shell-Gloss-Black-ABS-/194293903797?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l6249&mkrid=711-127632-2357-0
Sure thing here is an active link👍🏾 www.ebay.com/itm/255627620084?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=ACaW4jggQBa&sssrc=2349624&ssuid=jceqVeWvQLq&var=&widget_ver=artemis&media=COPY
Thank you, my wife likes it much better. I agree that this factory grille from GM was a little blah, even the Denali grille was a bit boring. This has been a nice inexpensive update to the front end.
The aftermarket grille is nice but the original looks better on the truck by the way because of its silver brirghtworks that matches with other silver colors accents elsewhere.
Thanks for the feedback. The plan was to apply vinyl over the smoked vinyl over the chrome accents, it is in the shop, thanks for reminding me I need to do that 😂
Nice video. Wonder if it's impossible or just next to impossible to work from the top grill clips down to remove the grill without removing the front bumper? Any thoughts on that?
Great question! I do not see removing the grill without removing the bumper cover. It takes a lot of flexing of the bumper cover to get the grille out. And the ones at the bottom of the grille were tough even with the bumper cover off.
I agree, it is pretty involved for a grille swap, but whatever makes the wife happy right 😂. It's a heck of a lot easier than a transmission or fuel pump replacement.
I know it's to late now but I wish I could of seen how to take out that farthest 7mm that's tucked behind the bumper I gave up ig on to the shop ill pay them for their headache..lol
I'm sorry, you can use a.1/4" thumb ratchet or about 4 extensions, that one is tricky to get to. I will have to remove the bumper to take care of some paint work, I will post up a more complete removal video.
Thank you very much for the video. I watched several videos this one was the most comprehensive. I was able to change the front grill on my Yukon is well most appreciate it. 11:52
You're very welcome, glad that this video helped 😎
I’m amazed at how clean the engine bay is kept! 👀
Thank you! I try to keep it clean so if something happens I can easily spot it before it is too late.
Thank you so much for this video! I was able to remove my front bumper and repair my “Active Grill Shutter” as well as install my new grill!! Thanks again bud!
Glad it helped! Thank you for watching 👍🏾
Thanks for the play by play instructions King. Bless!!
Sure thing 👍🏾 it helps to have a little 'go by' just in case you forget a step.
That’s a nice look! Smoked headlight lenses would look great with that grille too.
Good call👍🏾
I was just thinking in my mind, that engine bay looking mighty clean 😁
Thanks bro👊🏾 keeping it clean makes it easier to find leaks😅
Rad video dude. Thank you! Starting my wife’s in about 30 mins. Lol.
That is awesome! I hope the video helps out👍🏾
Very well explained and in detail, thank you very much
You're welcome, glad to help 😎
That intro was great! :D
THANK YOU SIR!!! Looks awesome!
Glad you like it, I hope the video helps out!
Looks awesome.
Thank you
Great video buddy ! Just what I needed
Thanks, I'm glad it was useful for you 😎
I told my husband I need this!!
Awesome 😎 I hope he gets it and this video helps him get it installed 👍🏾
Good video. I’m doing that same grill this weekend
Thanks! Good luck, I hope it goes smoothly for you.
Nice Video well explain in detailed I just purchase a another grille and I know I can change it Base on your Video Thanks
Thank you, I am glad you found this video helpful.
Great video. Thanks for the help
Thank you, glad to help.
Thank you for this, super helpful 🌹🌹🌹
Glad I could help out. 👍
For those two rivets you cut off, how did you replace those rivets or did you put in nut/bolt combination? If so, what size nut/bolt did you use?
I used a two piece push clip that I found on Amazon, they have them at local part stores as well.
Awesome, thank you for the quick response. I am going to change out my grille this weekend! Think you for your video, I really appreciate this!!
@@TimFletcher-jn4or you're welcome, glad to help. 😎
When you pulled the driver side of the bumper, a black piece popped out, you showed it 3 times in your video, did that break or was that supposed to happen? Other videos says there are three 7MM screws that need to be removed, is that so or do you just pull the bumper to release? Thanks for the video, awesome work.
😅 that black piece was part of the bumper clip system, it was not supposed to break, but they fatigue and fail from time to time, it is not a big deal as the clips with the screws work together to hold the bumper on.
There are several 7mm screws on this bumper and just about everywhere else on these GM vehicles, they must have gotten a really good deal on these 😅. Thank you for the feedback 👍🏾
@@3Wheels1Block Awesome, I appreciate the quick response. Again, great video and very helpful. 🙂👍
@@shill2129 I am glad to help. If you happen to get stuck, you can catch me on IG @3wheels1block also.
@@3Wheels1Block Thanks, I will definitely reach out if I get stuck. I appreciate the help.
Nice video!
Thanks 😎
Looks nice
Thanks, she was happy with it...so far😅
Great job!
Thank you
Nice work looks hard
Thank you. This was a really extensive one, a lot of work to replace a grille👍🏾.
Lookin good bro
Thanks bro👊🏾
Those tabs at 9:15...you have to push up from the bottom.
If you wanted to do gloss black fog light covers, are those chrome ones easy to pop off? Asking for a friend lol. I want to do mine in gloss black around the two fog lights. Hoping front bumper doesn’t need to come off. Looks like they just pop in and out?
These do pop off, but you would do best removing them with the bumper cover off. Or you can wrap them in gloss black vinyl. I plan on using smoke black vinyl on these.
Its looks good. God bless.
Thank you.
Where did you get your plastic pry tools? Great video man
Thank you, you can grab a deluxe kit here.
www.amazon.com/dp/B07TL9X79V/ref=cm_sw_r_cp_apan_glt_fabc_P7QHZEVER05TVPYFD8K9
@@3Wheels1Block my man thanks..like you said wife wants a change lol
@@jonb9855 sure thing. I completely understand, gotta keep the wife happy.
How can I get the red caliper like yours?
They are available on Amazon.
Great video. Thank you. Grill looks great. Btw, what size are your rims and tires? Are they factory or aftermarket?
Thank you 👍🏾 these wheels are 24" Replica snowflakes.
great look! may i ask where did you get the grille from?
Thank you! This grille came from eBay.
www.ebay.com/itm/For-15-20-GMC-Yukon-XL-Mesh-Front-Bumper-Hood-Upper-Grille-Shell-Gloss-Black-ABS-/194293903797?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l6249&mkrid=711-127632-2357-0
Hey this link isn’t working anymore. Do you happen to know if they are still selling that one?
Sure thing here is an active link👍🏾
www.ebay.com/itm/255627620084?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=ACaW4jggQBa&sssrc=2349624&ssuid=jceqVeWvQLq&var=&widget_ver=artemis&media=COPY
Great video! Looks a lot better. Those pickup style factory grilles don’t look good on a Yukon. Chevy did better in this case.
Thank you, my wife likes it much better. I agree that this factory grille from GM was a little blah, even the Denali grille was a bit boring. This has been a nice inexpensive update to the front end.
where did you buy your grill?
I found it on eBay
www.ebay.com/itm/284310173265?fits=Year%3A2016%7CModel%3AYukon%7CMake%3AGMC&hash=item423234f651:g:ef4AAOSwVtVhLbs7
Link to the grill itself?
Sure thing
www.ebay.com/itm/144054746755?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=hatthmm-skq&sssrc=2349624&ssuid=jceqVeWvQLq&var=&widget_ver=artemis&media=COPY
Good thing i dont have to worry about that on my Canyon Elevation
That's right your Elevation comes with the blackout grille from the factory 😅. The work has already been done for you.
Can u send me link to the grill? Nice video👍🏽
Thanks
www.ebay.com/itm/For-15-2020-GMC-Yukon-XL-Mesh-Denali-Style-Front-Grille-Grill-Hood-Glossy-Black-/354005021254?mkcid=16&mkevt=1&_trksid=p4429486.m46890.l6249&mkrid=711-127632-2357-0
The aftermarket grille is nice but the original looks better on the truck by the way because of its silver brirghtworks that matches with other silver colors accents elsewhere.
Thanks for the feedback. The plan was to apply vinyl over the smoked vinyl over the chrome accents, it is in the shop, thanks for reminding me I need to do that 😂
Anyone know where to find this or a similar grill? Looks like the eBay link no longer works.
Great look and video.
Thanks you can get it here. I have updated the link
www.ebay.com/itm/185397091947
What sz wheels are those?
These are 24x10s
Thanks is it dropped as well? Or stock height
@iverson2k10 this is at stock ride height 😎
Nice video. Wonder if it's impossible or just next to impossible to work from the top grill clips down to remove the grill without removing the front bumper? Any thoughts on that?
Great question! I do not see removing the grill without removing the bumper cover. It takes a lot of flexing of the bumper cover to get the grille out. And the ones at the bottom of the grille were tough even with the bumper cover off.
@@3Wheels1Block Good to know. Yeah I didn't get very far with it still on the truck
@@BenjamIncredible I can believe it, it was stubborn with the bumper off, so I could only imagine with the bumper on.
Beutiful. 🚙. Like 👍🏽
Thank you 👍🏾
Great vid
Too much work tho lol
Thank you! It was quite a bit of work to get the grille swapped out, but it has held up well for the past couple years.
A lot of work to replace a grill for aesthetics only
I agree, it is pretty involved for a grille swap, but whatever makes the wife happy right 😂. It's a heck of a lot easier than a transmission or fuel pump replacement.
I know it's to late now but I wish I could of seen how to take out that farthest 7mm that's tucked behind the bumper I gave up ig on to the shop ill pay them for their headache..lol
I'm sorry, you can use a.1/4" thumb ratchet or about 4 extensions, that one is tricky to get to.
I will have to remove the bumper to take care of some paint work, I will post up a more complete removal video.