Unreal CNC Machining | Mind Blowing Speeds | Earth Shattering Cuts
ฝัง
- เผยแพร่เมื่อ 16 ก.พ. 2020
- Some of the most incredible tools for CNC Machining on the planet! Monster CNC Tools and CNC Machine Tools. Crazy roughing speeds, drilling, end mills, shoulder mills and the MONSTER Kennametal HARVI Ultra 8X in different steel and hard metals...
Best CNC Machining of TITANS 2019 - Category: DMG MORI DMU50 (MILLING)
CNC Machining is what we do. We are Experts and on this channel we are bringing our knowledge and experience to YOU. Want more? Learn CAD, CAM & CNC Machining through our FREE TITANS of CNC: Academy.
Subscribe for daily content and expert knowledge: bit.ly/SUBTITANS
___
___
FREE CNC Machining Academy. Join the Revolution:
academy.titansofcnc.com
Follow us on Instagram:
/ titans_of_cnc_academy
Like us on Facebook:
/ titansofcnc
Join the conversation on our Facebook Group:
/ titansofcncacademy
Connect with us on LinkedIn:
/ titansofcnc
Follow our CEO, Titan Gilroy:
/ titan-gilroy
___
___
THANK YOU to our Partners who make this content possible:
Kennametal - bit.ly/TIKennametal
Mastercam - bit.ly/Mastercam_Titan
Blaser Swisslube - bit.ly/TIBlaser
Mitee-Bite - bit.ly/TIMiteeBite
Royal Products - bit.ly/TIRoyalProducts
Schunk - bit.ly/TiSCHUNK
JobBOSS - bit.ly/TiJB10
Tormach - bit.ly/TOCtor
Autodesk - bit.ly/TIAutodesk
#CNC #Machining #dmgmori
MB017E7JAFBH4VC - วิทยาศาสตร์และเทคโนโลยี
legend says if you look into the window of a machining center and say depth of cut three times fast Titan will show up and halve your machine time
Beanpapac15 Tried it. Was asked to leave. They don’t even know how I got past security.
😂😂😂😂😂😂
www.yaplakal.com/forum23/topic2193714.html станок точит человека death the same machine
@@TITANSofCNC www.yaplakal.com/forum23/topic2193714.html станок точит человека death the same machine
That first full slot cut, holy shit. Watching the holder flex and bounce back and forth made my ass pucker
I think that's a chip clearance cut and done on purpose.
@@jackbelk8527 your absolutely right
That is some serious machining!
@@jackbelk8527 you could see the holder move more than the spindel itself lol
@@luisermert the holder is not moving because it is flexing. It is programmed to do that pattern to keep chips from jamming.
Great video. YOU should team up with the SlowMo Guys to do some 4K super slow motion shots.
Thepriest39 yes! This comment🙏🏼👆🏼
Yes please
We definitely need this to happen
Yes please.
@William Everyman Did they cheat on you?
The small diameter deep drill was the most amazing!
Damn, that first end mill really put on some work.
That full depth slot looked like it was going to tear the machine apart
I bet the power company notices when Titan is doing some heavy cutting. The power company be like, “put another rod in the reactor, Titan needs more power!”
@RoMMeL1337ak47 well it depends xD i guess he ment the fuel "rods" they are more like lined up pellets but people call them rods actually there are many different architectures. your right for all the types of control rods...sorry just had to be a pedant. hmm...i wonder what happens if you just throw a bunch of loose fuel rods in the water.
@RoMMeL1337ak47 not that i know i guess it would be pretty hard or impossible to control the occuring spikes/changes in neutron emissions actually i have no idea about npps ...basically ur right but there are differences about the achitechtures and in most cases the fuel rods are only partly exchanged...remember!! i just had to be a pedant ;D
It's alright buddy I know what you meant! :-)
@RoMMeL1337ak47 the good old Soviet RBMK reactors allowed that. One of them even let people pick up fuel from the ground in vincinity of the facility.
)))
Just a PSA: Titan has machines and workholding techniques that can support running this hard. If you're planning on trying stuff like this, take into account your machine. Titan and his programmers can run like this because they consult with their machine's manufacturer, tool holder's manufacturers, and tool manufacturers. If you're not willing to go that far than don't try this, you'll most likely mess up your machine. P.s material is also very important.
My CNC: *buckles and flexes when taking cuts with more than 1mm depth*
Real CNCs:
What do you have?
@@Sandwich4321 im using one at my university which was built by some masters and PhD students. It's great for some materials but you have to go slow and not take any aggressive cuts.
@@doughntworry I have an mpcnc with a dodgy spindle bracket that I need to replace
@@doughntworry guess you probably shouldn't call it "mine", maybe the one I use, or University I attend. 🤭
@@LuisCasstle I was literally making a stupid meme joke. But I will take journalistic ethics into account next time I write a joke comment
That first one looked a little rough on equipment
james ernst it was for testing the tool
These videos are all a joke and just for shock factor. Nobody that wants to make money with that end mill would ever program like that. I'd love to see that end mill run 5 parts in a row cutting those tool paths
Spindle bearings and ball screws are screaming in pain. 😰
The BOOMAGE is strong with this one.
I am definitely impressed. Some of those machines are flat-out hauling ass! Never seen anything like it.
Titan I recently watched your testimony and many of your other videos. I just wanted to let you know that I have a similar story and that you have inspired me! keep up the good work your killing it man!
Nice reference video a lot of your recipes all in spot. I'm still amazed by that crazy long drill.
Amazing power. Amazing cutters.
Wow what a beast!
They really stepped it up a notch. over the last few years!
Watching the uniformàlly sized chips fly is most satisfying.
I’m speechless 😲
I used to haul these machines new to the customers around the country. Just loved it.
well, thats really mind blowing! never see something like that without a failure!
Right feed , right RPM and Harvi End Mills
They are the best
Just incredible and awesome!
Thank you for my Monday night therapy session! BOOM!!!
this thing is what my tormach wants to be when it grows up. can't wait to get my upgrade :)
Excellent video, you have tools of very good quality and of the best.
Wow that speed
What a beast. Big HP
Wow, just wow.
Grazie mille per il video,
CNC una cosa pazzesca, viva tecnologia 🔝
0:26 when the weak ass spindle does the trochoidal movement for you
Try taking that cut in your tormach
The Tool Holder startet to flex.
Weak ass spindle on a DMG Mori... Nice one, brother!
Almost stalled the servo with that first part👌
That's impressive 👌🏻👌🏻
You're a God damn mad man Titan hahaha this is so badass! 🤯💪🤘
Realy mindblowing...!
NICE SHOTS ! :D
Those chips would look great in a resin project
This video is sick!
Impressive
Nice video Titan. 😊
Man, my work has one of these, it's so freaking cool...
Wow...monster
I have always loved DMG Mori Machines and the Kennametal bits compliment their ability so well-the speeds are really crazy.
That shaved metal looks delicios
The aluminum case in the last video for the gopro. Did you guys make it? How do i get one?
Its looks like a magic to me.
This is a perfect demo for chatter. You can see it after 0:33.
That's one purpose, not chatter.
@@Benautodesign I don't think so. look at 0:41 how the spindle flexes
@@Horstroad its totally the toolpath my man, still a ridiculous cut but the wiggle is a chip clearing exercise or just showing capabilities
@Ultra CNC it may have heavy load and some flex but that odd looking wiggle is a tool path
@Ultra CNC its wasnt a straight cut, tool woulda broke way before look how much the spindle is moving , definitely not a straight line
Das nuts!!
VERY VERY GOOD
I work on CNC milling machine, but it's not strong enough for this! The machine,cutting tool and tool holder are very important for this! But it's awesome to watch! 👍👍👍👍
WIth the 3/4" Harvi, what is the spindle load reading when taking those deep cuts?
Yes.
The unit of choice in this case is "broken spindle bearings per month"
150% most likely
It doesnt go more than that 😂
Cool video. Kennametal is near where I live in NC.
You guys at such show offs😉😉
Do you have any on line classes for to learn cnc programming.. well I am from India and also I am a cnc operator I wanted to learn cnc programming I have seen so many of yours videos ...
I think that i need my security glases for watch this
And a riot shield...nah, forget about it when it flied out like a 50cal....
OMG ... it cuts metal like wood ... unbelievable.
What do you do with the shavings. Are they recycled?
coooooooool!!!👍👍👍😎
DMGMori. One of the best machine
nicely
im interested to see how long your tips/tools last for
Wow how did the tolerance hold on all of these?
Cutting .375 em at .25 doc through 6061 at 185ipm is mind blowing to me, lol. Are you guys using volumill? Some of the adaptive cuts look familiar.
Sure !fierro dulce !! Así cualquier máquina trabaja rápido!! A ver haz con hierro forjado y otro más duro??
WTF? Insane 0_0... My God this is hard steel... Incredible...
Noob question
Where does all the coolant go?
Does it get recycled?
Hi which software you use for programming
speechless ! I would let you do all ma components if your in Europe :D
Is it the machine that mind blowing or is it just really good SHARP tooling? Either was its gratifying to watch 👍
Funny...the title reads like one of those clickbait video collator channels...but this is all real stuff from Titans of CNC, well done folks!
I don't understand most of the parameters shown, but I still enjoyed it! All thanks to the full week spent working at a CNC mill, just pressing "start" and changing bits between stages, lol
C est dingue...
I use the Harvey III 3/8in in NAK55 8100 RPM 3/4 in depth of cut at 136in per min with radial of .063 works like a dream👍🏻
you have not machined until you use a Makino! Best spindles in the world! hands down!
Wow
Push it to the limit :)
And have to replace your spindle bearings and ball screws. I'D NEVER run it that hard.
Ok I admit that's impressive. But I wobder tho, how those tools look like after such work? Are they eligible for resharpening?
Man you guys are nuts. This is epic. If only I had $500k+ to shell out on a cnc machine...
Buy a used fadal for $10k it’s a good start.
@@glennedward2201 I'd better start saving 🤣🤣
Wholly!
Second cut is like trochoidal milling im not sure is it?
No coolant/cutting compound?
Ok! Show me the video when it'll be a twentieth workpiece! I made such demovideos with sandvick & tungaloy!
wow
Can someone tell me why no cooling fluid is used in these operations?
Looks good, but what's the recipe for the 1600 ipm in the aluminum?
Insane cutting speeds. We’ve had a max of 185ipm and now moving into a new machine that cuts little over 400ipm and rapids at 900. Nowhere anything like this.
Don’t know much about machining yet but this is awesome!!!
Awesome. It’s scary seeing it going so fast. I have a basic question - when you’re done cutting your part, how do you separate it from the material still in the work holding if that remaining material is not to be used? Flip the part with new holding setup and continue machining the other side?
At the end they normaly programate to cut the under side and leave just a very thin layer of material strong enough to hold the part till u cut it with a knife or rip it off
U always use more material than needed
@@LordOfChaos.x this is metal not plastic. It doesn't work like that
Actually yes, that is pretty much how it goes. There are several tricks to hold complex shapes so it can be done
@@avroarchitect1793 it goes for both Aluminium and Steel , even Titanium
Wtf are u talking about
Google it
Excellent piece of equipment,but i can't stop thinking how hillarious and expensive will be a fail at these speeds.
do you have fans to keep tools cool or just run them as is?
Is this the standard 15k rpm spindle or 15k high tourque?
20K 40HP
@@TITANSofCNC thank you for the response
Would you recommend the upgrade? Standard is 111nm.
Can i get work in this team????
I am looking for the „Harvi“ tool holder. They have nice big Diameter. Can somebody help me to find out manufacurer name?
Kennametal
Boom
I feel like Titan has a Minecraft enchanting table in his office that he uses to put Unbreakable ∞ on all of his tools lol
And Efficiency X
Like Butter
I need to show this video to the programmers at my shop, who are intent on using centric toolpathing/adaptive feed, and take a 1" ingersol apx cutter (apk?) with a base speed of .020ipt at 2200rpm, with a .04 depth of cut and full tool engagement oh H14 and wonder why the inserts break after 20 minutes causing us to have to adjust the ipt to around .009 like it should be or splice the program on most cuts. Yeah, apparently none of them know gcode either.
Morgana is it the Hi Feed mini 1TG1F? That’s my favorite tool in our magazine. I put one in all our mills loaded with the 2530 inserts. (But you may be better suited to run the 2505) .040 DOC and full engagement is where that tool is supposed to be ran. And around 2k is about the speed as well if it is the 4 pocket. But in a harder material, I would back off, maybe 500 SFM and .015 fpt to start...and make sure the air blow is good. You may want to check your pockets out with a magnifying glass on the cutter body. They have a lot of geometry in them to lock those inserts just right. If that geometry is compromised from all the busted inserts, then your fight is pointless. Good luck!
How can the programmers does not know gcode? Stop bullshiting.
@@satrioekowicaksono7452 its simple they say the're programmers. But in reallity all they do is zero tools hit cycle start and cycle stop all day. This guy may be a programmer though he seems to know his shit
I'm all of the sudden turned on from this chick...
Somehow it seems Morgana and I have the same programmers and I dont even know where she works .
So HAAS isnt good enough anymore?
mill go brrrr
Вот это фреза!Вот это я понимаю...
A long Time ago we had a power failure in our area. The first Day we were allowed to use juice from the emergency power core we started up our machine shop and we were doing heavy cutting. 3 Minutes later we got a call to shut down at least 80% of the shop machines because we overloaded the system.....
First one is a fast and sure death of ceramic spindle bearings
That first one the spindle was wobbling all over the place. Would need seriously calibrating after that.
Look at the color of the chips, wouldnt that heat throw off the final dimension?