I read the ingredients and it's the same as regular fog fluid you would just need to test and figure out the water to fluid ratio. It's 40 watts so I'm assuming it will require some dilution of regular fog solution cut with distilled water.
So as stated, Ulanzi does not have the Fog Solution available at this time. It's most likely a supply and demand problem. I did HOWEVER, find out from them on how to make your own its: The Fog Juice consists of vegetable glycerin and propylene glycol (VG: PG = 8:2). That's from Ulanzi and they say it consists of a 8:2 ratio so 8 parts vegetable glycerin to 2 parts propylene glycol. They as well as I, do not recommend making your own. I always recommend not making your own because there's strict standards in place for creating the fog solution, strict standards we cannot match making at home.
@@cyanblues I imagine that any vape type solution will work just fine in these units. This unit isnt a true fog machine in that it doesn't have an aluminum block and 100`s if not thousands of watts dedicated to the heater so actual fog solution may be too thick for it to handle. Most vape pens have a very similar heating element as this fog machine so their fog solutions may be more suitable.
I got about 9:45 of use before the unit shuts off. That was with the fog output at FULL. I think it could go longer but has a safety feature that shuts it down so it doesn't overheat. I don't think anyone will use it for that long.
@@krynglak They're backlogged with orders the demand was greater than their supply. I think new orders are going out in February. I don't know why you haven't recieved your. I ordered November 13th and just got it like a week ago.
I have not gotten my hands on a smoke ninja however it's based off the same technology including the chamber or what I call the Atomizer. I will say the FILMOG has two batteries installed and the Ninja only has one. Also the FILMOG has a LCD display and better looking wireless remote. The FILMOG is also significantly cheaper and the chambers are half the price of a Ninja. I cannot comment on the Ninjas wattage because they do not include that information so I cannot say if it's more powerful or produces more fog. I'm going to say they are very similar in output just by the size of the atomizer(chamber)
just got mine too, its great so far when I tested it. Also I can't even find the fog juice on their site so they probably don't sell their own brand?
I read the ingredients and it's the same as regular fog fluid you would just need to test and figure out the water to fluid ratio. It's 40 watts so I'm assuming it will require some dilution of regular fog solution cut with distilled water.
So as stated, Ulanzi does not have the Fog Solution available at this time. It's most likely a supply and demand problem. I did HOWEVER, find out from them on how to make your own its:
The Fog Juice consists of vegetable glycerin and propylene glycol (VG: PG = 8:2). That's from Ulanzi and they say it consists of a 8:2 ratio so 8 parts vegetable glycerin to 2 parts propylene glycol. They as well as I, do not recommend making your own. I always recommend not making your own because there's strict standards in place for creating the fog solution, strict standards we cannot match making at home.
@@TheatricallyJerry yeah I found that out too, someone already premix them on ebay so I just order 32oz to test since I don't want to mix it myself
@@cyanblues I imagine that any vape type solution will work just fine in these units. This unit isnt a true fog machine in that it doesn't have an aluminum block and 100`s if not thousands of watts dedicated to the heater so actual fog solution may be too thick for it to handle. Most vape pens have a very similar heating element as this fog machine so their fog solutions may be more suitable.
@@TheatricallyJerry On ulanzi webpage there is FAQ section and they answer to someone that it is PG/VG ratio 2/8 I will test it
Please test how long it can run continously at full power
Absolutely, you got it! We will go over how it runs in part Two of this three part series. Stay tuned 🙏
I got about 9:45 of use before the unit shuts off. That was with the fog output at FULL. I think it could go longer but has a safety feature that shuts it down so it doesn't overheat. I don't think anyone will use it for that long.
@@TheatricallyJerry thank's it's longer than I expected, I'm waiting for my unit ordered almost 2 months ago
@@krynglak They're backlogged with orders the demand was greater than their supply. I think new orders are going out in February. I don't know why you haven't recieved your. I ordered November 13th and just got it like a week ago.
@@TheatricallyJerry Order arrived today :)
Hey Jerry have you tried the SmokeNinja? Wondering how this compares to that?
I have not gotten my hands on a smoke ninja however it's based off the same technology including the chamber or what I call the Atomizer. I will say the FILMOG has two batteries installed and the Ninja only has one. Also the FILMOG has a LCD display and better looking wireless remote. The FILMOG is also significantly cheaper and the chambers are half the price of a Ninja. I cannot comment on the Ninjas wattage because they do not include that information so I cannot say if it's more powerful or produces more fog. I'm going to say they are very similar in output just by the size of the atomizer(chamber)