วีดีโอ

There are certain colors the CMY can't create that CMY can. Also mixing CMY and the color Wheel at the same time creates more dynamic colors.

@@GobaUlianov th-cam.com/video/GciuGNgSfJg/w-d-xo.htmlsi=eF9AYGCcUZ5bxOvB

@@delariomario960 You can save the effects as a user effect and recall it by pressing the button on the screen or you can use the effect to store in a cue, cue list or playback Fader.You can also edit the effect label to help you remember what the effect is.

@@mochirgifadhilalabi9855 Yes I can do a tutorial on how to attach a visualizer to Victory 3.

Thanks for the tips! 🙏

To connect a external screen for visualizer you need to connect the Victory 3 to a Ethernet hub via Victory 3's Artnet port. Then connect a PC or Laptop to the hub via ethernet. Next go into the settings on the Victory 3 and enable Artnet. Hit setup-Network Settings to view and set a IP address, subnet and gateway. Then you can use your visualizer.

@@TheatricallyJerry we need a software of visualiser

@@ch_usama_arain correct

@@TheatricallyJerry you can send me the link of software

@@ch_usama_arain You must purchase a visualizer. Any visualizer that supports ARTNET will work.

@@user-ec7jz9vk4x Thanks for the support 👍

@@muralikrishnaa8875 My Pleasure! Thanks for the support👍

@@muralikrishnaa8875 Yes, soon!

@@kevinswan8311 You can but it ruins a perfectly good Ethernet cable, just in case you want to uninstall the Ethercon connector. If you have a cheap Ethernet cable you could but mine are costly because of their run length.

Found it on Amazon. Thanks for the great videos, Jerry!

@@tomcummings463 My pleasure, you'll love the build quality its a solid piece of metal.

@@lebraun12345 Yes the clamps can be removed, the hardware is M8x20

@@lebraun12345 Yes the S711 Buddha has a slot and lock gobo system to accept glass gobos. You can customize them through gobo vendors. I have a video showing V-Show's slot and lock system here: th-cam.com/video/uHctj-0gvNA/w-d-xo.htmlsi=82_kdINlbpKItDk4 The S711 has a 23mm outer dimension gobo with a 17mm inner dimension. They are marked as OD/ID

@@lebraun12345 You can purchase them through my good friend V-Show Jack at livedou.com/

@@TheatricallyJerry thanks so much!!

@@lebraun12345 My pleasure! Thank for supporting my channel! More to come!

@@lovedrumandbass share.temu.com/PaTWcg1q47A

@@user-bm8ys3pd6r you hold down the power button on the wireless remote and then hit the button once on the fog machine. If it's not turning on at all the 18650 is dead or needs charged. Sometimes the 18650 will die if left uncharged for a long period of time. They can be brought back to life by using a 18650 battery charger not the charger built into the FILMOG.

The camera exposure is why it looks bigger.

Thank you dear 🙏 I enjoy making great videos with alot of information for my viewers and customers.

I would love to! Maybe suggest to them that you would like to see a review of the 280C by @TheatricallyJerry and see if they are interested.

So the Artnet node has eight dmx-512 3-pin connectors on the back and I want to access them from the front so I created a pass or feed through. The Artnet node converts a single Artnet 4 signal and properly addresses each of the eight universes contained in each of the dmx ports on the back. When you mount a node to a flight case the ports are on the back and are hard to access so it's better to access them from the front.

Yes, it holds it dmx value if powers lost there's actually a option to change how you want it to respond on the new one.

@@TheatricallyJerry thank gosh. I returned the old model right when I revived it because of that. Thanks for confirming! Just purchased it!

@@Hunterbonnar The new model is much better in many ways, although I miss the twist dial

@@TheatricallyJerry I see that, I’m exited!! I the twist dial was a very quick way to get around the menus however I would take a real ArtNet node functionality any day. The old model I had just did not hold dmx packets unless something was being sent constantly and it was really not good. I was about to buy a different brand of ArtNet node until I saw they updated the design. I wasn’t going to purchase unless I knew it was a legit node which is how I found your vid :). I’ll make a video on it as well.

@@Hunterbonnar it definetly takes Artnet and sends it to the 8 ports. The dmx ports can also be set as either in or out. There's also two ethernet or ethercon connectors as well. It works for what I use it for which is to control 4096 channels of DMX for stage.

Tell them to send me one and I'll review it 😁

I purchase most if not all of my equipment unless otherwise noted. Thanks for being excited about this fixture, the reviews going to be great.

The zoom is fine it's just not as wide on the wide end like with the S712 they are two different fixtures and ones much cheaper. It is however a perfect match with the S712 if you want to compliment each other. Thanks for the info.

@@TheatricallyJerry would it be possible for you to film the zoom of the s716?

Absolutely, stay tuned I release a short on its Zoom capabilities.

@@alexman649 if you go to the 36 minute mark, I do go over the zoom. It's a 16-bit linear zoom.

I would love to, However, V-Show hasn't given me any units to review. Maybe they will soon?

@@TheatricallyJerry thank

Part Two will release tomorrow, you'll love the beam and Gobos on this one! Stay tuned

A 6 degree beam angle is extremely tight for a 3 in 1. There are static Gobos that can make it even smaller as well as reducers for open or the circular beam.

Zero tank leaks, I have had the tank filled for over two months now and it has spilled a drop. The tanks are real glass and metal lids with a rubber stopper to fill the fog solution.

It kind of makes sense and kind of doesn't. I mean I could have lived with just one battery percentage that averaged both batteries or a flashing symbol to tell you a battery is bad. They could have used that Real Estate for other information like the voltage going to the atomizer or incorporating a sensor to tell you how much fluid is left in the tank. But I get what you are saying.

@@TheatricallyJerry Yeah the one I bought also has a glas tank with metal top and bottom but for some reason I dont think its that good even though it looks extremely solid. I like the Ulanzi one much better!

Yes I did it but still can not

​@@27Kfoottball Do you have the latest firmware? They released it in April

Is the USB drive formatted correctly? It's supposed to be FAT32 or it won't work. The system is based off Linux and it can't handle NTFS. You need to be updated to the latest firmware to make sure everything is running smoothly.

I don't know what you're asking? I'm sorry

@@TheatricallyJerry I want to ask you how about your console input image? I want to know How to upload an image ok?

@@TheatricallyJerry can you upload video ok?

@@27Kfoottball th-cam.com/video/GciuGNgSfJg/w-d-xo.htmlsi=irDnmtK2ml-4OP7S

The pleasure is mine, thanks for subscribing!

I'm sorry to hear this, maybe a bad batch? Mines still going strong. What broke on it?

@@TheatricallyJerry Atomizer I believe it's called. Whatever holds the fluid.. I already sent ti back. I usually love Ulanzi items, and I understand no one is perfect. It isn't a big deal.

It's already up: th-cam.com/video/Id2K2nux58w/w-d-xo.htmlsi=kzdXWwJZU2n5PY-X Have a look😊

Thanks

I'm not sure what you are referring to. Can you explain more? Thanks

Later this week I release part Two and part THREE that goes over the entire light fixture In-Depth review.

I do believe sometime next week I recieve a new unit to review from Becen so stay tuned to my channel for a full review on their latest light fixtures. I also have a review coming up this week featuring a 450w light.

@@TheatricallyJerry so nice....waiting new light

Press setup and then console manage button. The option to set the master faders function key to blackout is available under console manage. You also need to update to the latest firmware for this to take effect.

@@TheatricallyJerry I actually have a Fos designer 2048 console, which is identical to Code victory 3. I don't know who copied who ;) I have the latest available firmware 3.2.7 and under the master options I have: grandmaster and speed, so it confuses me a bit. Thank you very much for your answer, and I'm also wondering if you know if there are any significant differences between these two consoles?

@tomythedj Yes CODE makes one version and other manufacturers silk screen their name over it. Very common.

No difference, same console

Hi, I have another question if you can help me. I have the entire first page of faders programmed. When I program each subsequent page and leave the fader on it active, when returning to the first page, when I lower that same fader, what was programmed on the other page turns off. Do you know if it is possible to program it in such a way that the fader remains active until I physically lower it on another page