Thank you so much for your help. That little nub of an outlet broke just like your client's. We rigged it with a 5/8s hose and a male/male connector. Was under the impression it was the coolant portion of the oil cooler that broke. I know what to order now. Much appreciated!!!
Just a little tip, you don’t need to start the car to bleed the system. You simply turn heat all way up and blower on lowest fan speed then press gas petal for 12 seconds to the floor . You will hear the electrical pump start purging it cycles off and on for 10min roughly
you have to purge the system of air, piece of cake, turn ignition on without starting the engine, adjust heat to max settings, press throttle pedal for 10 seconds, the water pump will start and run for 12 minutes, you can see the flow looking at the reservoir. The Bentley manual states that without the purge procedure the engine may overheat. It advises to connect an external power source to avoid depleting the battery.
@@killakill786 my upper radiator hose in leaking 08 528i do u know if the hose is easy to change like this dudes video? Also I’ll bleed it the way ya said.
@@jasonprevatt9636 getting to some clips are difficult ult but relatively an easy job. To bleed it there are a bunch of TH-cam videos that show the bleeding procedure with the car. You don't need any special tools
![เปิดคำทำนาย นอสตราดามุส - บาบา วานก้า ปี 2025 คนทั่วโลกต้องเจออะไรบ้าง? | แฉ 11 ธ.ค. 67 [2/3] |GMM25](http://i.ytimg.com/vi/xmTIKWJUMPM/mqdefault.jpg)
HOW DOES THE CONNECTOR work? Is it simply a push and twist, left, right?
Thank you so much for your help. That little nub of an outlet broke just like your client's. We rigged it with a 5/8s hose and a male/male connector. Was under the impression it was the coolant portion of the oil cooler that broke. I know what to order now. Much appreciated!!!
Just a little tip, you don’t need to start the car to bleed the system. You simply turn heat all way up and blower on lowest fan speed then press gas petal for 12 seconds to the floor . You will hear the electrical pump start purging it cycles off and on for 10min roughly
I just noticed mine starting to leak so this video helped a lot, thank you
you have to purge the system of air, piece of cake, turn ignition on without starting the engine, adjust heat to max settings, press throttle pedal for 10 seconds, the water pump will start and run for 12 minutes, you can see the flow looking at the reservoir. The Bentley manual states that without the purge procedure the engine may overheat. It advises to connect an external power source to avoid depleting the battery.
Thank you, bro.
I wanted to see how it you purple.Get the air of the lines
This was very helpful for me, I've learned alot from this helpful video. Thank you soo much for posting this video sir.
Why don’t they use metallic tubing and fittings in cars?
saving costs
Thank you!
hafl thius vid is u talking about what they use to build it we wanna know how to fix it
pls just do it.
What the name off the plastic that broke off I need to replace mine
Yes whats the name? Is it the lower radiator hose?
The car has a bleed feature if you turn the heater on and hold the gas pedal for 15 seconds when the car is on acc
I thought the same thing. Would that be the correct way to do it? Or can you do what he did?
@@nick9341 what i mentioned is the correct way
@@killakill786 thanks
@@killakill786 my upper radiator hose in leaking 08 528i do u know if the hose is easy to change like this dudes video? Also I’ll bleed it the way ya said.
@@jasonprevatt9636 getting to some clips are difficult ult but relatively an easy job. To bleed it there are a bunch of TH-cam videos that show the bleeding procedure with the car. You don't need any special tools