You are a craftsman. I would have thought that cab was a basket case. Good to see you wearing the face shield when grinding. Too many people think that wheel will always stay together.
Let me tell you something Gibson63 when I started watching your videos going through a few things not knowing if you were an expert or just someone with a passion or both. Man you have a work ethic that we seldom see anymore. I have a 1961 Chevy Apache that I'd like to get going on, I just haven't worked much on vehicles since I was 15 years old. Well obviously simpler things like brakes, oil changes, etc., but nothing extensive. That being said I find myself constantly reading and looking through videos. You absolutely have made me say to myself that I've got to get this done. When I saw your 63' my mouth dropped open. I love it! I wanted a 63' because of my birth year, but hey maybe some day in the future. Man thanks for these videos !
thanks for your videos. They are really helping me along with my 64 C10. I have extensive floor repair and a pillar repair going on, and your videos is just what the doctor ordered. Thanks again!!
We are building our 63 c10 and we use your videos a lot as learning tools along the way. We do wish you were still making content!! We are excited to start the cutting and welding soon enough.
We just made out first attempt at an outer floor repair on our 63, had to cut the back end off and splice 1 1/2' and cut the front corner and splice a pizza slice to fit too, out cab support needed to be cut the same way, almost seemed like we ended up fabricating it from scratch for how much we cut it up. Your videos have been so helpful to us, thank you so much! I need to work on my hammer and dolly work for sure too! been a long time since i used them.
Going back to your red chevy you have made some of the best tech videos on youtube . this is by far one of the the best I have ever seen. thanks so much for sharing.
I agree, and if I can expand on this idea, I am a total virgin about doing this and watching each and every miniscule step matters. It is fascinating. A true tutorial, rather than a parts parade with some grab-ass idiots. Thank you!
You do amazing work. I used to be kind of bummed that my California C10 had a few rust holes in the floors, but I need to be grateful because it could be way worse.
Thank you for this great video, you do some amazing work and I am learning as I go and all of what you have done to your truck I will have to do to my 66 GMC. Thank you for this very informative and enlightening class!
Awesome job, Sir! I thought for sure that driver's side was going to be a beast to tackle when I first saw all the rust and rot, but the way you ate it up one piece at a time made it look easy. Great work.
you are so talented and you are an honorable man. I understand by what you were doing that you love your brother because of the work that you are doing on his truck only a brother that has love for his other brother can do something like this. may God bless you in anything that you do
Looks like the kind of rust we get here in Maine. If you're lucky enough to rescue one before the crusher gets it. You do great work. Thanks for sharing.
I've watched a LOT of your videos and learned a great deal from all of them. Your truck is, I believe, a '62 while my truck is an '86 - both Chevies. My truck is badly rusted but not as bad as yours. The repair principles are exactly the same and now I can see just how to attack mine. So, I've not only gotten knowledge from your vids, I've gotten courage. LOL Can't thank you enough for putting these videos up.
Man, you really are rescuing that nice old truck! First time I have watched your channel and have subscribed. I really enjoy how you do your videos, showing more in ten minutes than most do in 10 videos. Thanks man, keep at it.
Thank you for making these videos Steve. I'm going to have to do everything you're doing on my 63 gmc with the factory v6. Neat trick with the witness board. Just started on mine with the help of my 12 year old grandson. We are replacing all brake wheel cylinders and brake hoses right now. Gonna try the body work myself and if it doesn't work out, I think I'll trailer it up to you.LOL Wish you were my neighbor. Kenny
I'm a new subscriber and just want to thank you for showing your work so well and not having any music it's wonderful. Looking forward to seeing more of your work.
Great videos Gibson and great skills! I had to do some floor pan patches on my chevelle floor but my 65 C10 needs floor work, rockers , cab corner kick panel patches quite abit more extensive repair like you been doing . I think ill be able to tackle it after seeing your videos thanks so much!
I'm looking at doing the same fixes to my 64 and 66 c10. I also have a 64 c20. Though I don't think it'll be easy, after watching your videos, I know it's possible. Thanks for the videos
the low parts of these trucks Needs a design change.If you look at all of the chevy truck floors.where dose most of the dirt and water end up.You need to bring the floor up by 1 to 2 inches to divert the water away from any corners or low spots.Just buy doing that you will no longer have a floor issue again
Great job brudda! I had to re subscribe for some reason, but I've always learned something from your videos. I have to do this same thing to my 84 K30 but mine is the little worse than your truck. 👍
Awesome video. For the non-welders who are looking to get this done, what's a fair price for this sort of work or asked another way, how many man-hours would you say this video entailed? Thanks!
Subscribed! Thanks for going through all the trouble of documenting this just to teach us with no personal benefit. Did you ever consider having the cab blasted to see the cheese easier?
Love these old trucks. Good to see someone helping save another. You are doing better about explaining every video.talking more, showing what your doing. What are your plans for the truck ?
great work ! a dying art ! I have to do the same to my truck. What would be a good price to pay for the same work done . The cab corner , inner and outer rocker panels ? your advice would be appreciated. thank you
Thank you for showing how to do this. You gave me the confidence to buy a 65 chev truck and try myself.
I love it when you get to "weldin and carryin on". 😂
You sir are the man and I appreciate your series.
You have to do the restoration on these trucks for the love of the truck ! Always loved the start & what you have at the end ! Great job sir !
I am impressed , most people would have said forget it it is too far gone, let’s get another truck. Thanks for sharing your work with us.
i really enjoy watchin' you work, it really inspires me to get at it! great Work, & videos!
You are a craftsman. I would have thought that cab was a basket case. Good to see you wearing the face shield when grinding. Too many people think that wheel will always stay together.
It's amazing what a skilled craftsman can do with basic tools. You just got a new sub.
Thanks
Let me tell you something Gibson63 when I started watching your videos going through a few things not knowing if you were an expert or just someone with a passion or both. Man you have a work ethic that we seldom see anymore. I have a 1961 Chevy Apache that I'd like to get going on, I just haven't worked much on vehicles since I was 15 years old. Well obviously simpler things like brakes, oil changes, etc., but nothing extensive. That being said I find myself constantly reading and looking through videos. You absolutely have made me say to myself that I've got to get this done. When I saw your 63' my mouth dropped open. I love it! I wanted a 63' because of my birth year, but hey maybe some day in the future. Man thanks for these videos !
thanks for your videos. They are really helping me along with my 64 C10. I have extensive floor repair and a pillar repair going on, and your videos is just what the doctor ordered. Thanks again!!
We are building our 63 c10 and we use your videos a lot as learning tools along the way. We do wish you were still making content!! We are excited to start the cutting and welding soon enough.
Thanks for watching man, I’m looking for a new project to start hopefully I’ll have some videos up soon
@@Gibson63. that’s awesome can’t wait. You make it look easy af.
it is amazing how every repair panel is available for that truck! Awesome job fitting them all in!
I'm fixing to do the same repair to my 66. I like how you left the cab supports and set everything up off that, good info
Cool deal man thanks for watching
These videos are a gold mine.
Your son is so lucky if he's interested in learning all this from you. Great work! I wish I had those skills.
THE BEST VIDEOS SO FAR,I LIKE THE WAY YOU EXPLAIN HANDS ON ALL THE WAY THROUGH THE WHOLE VIDEO GREAT JOB
We just made out first attempt at an outer floor repair on our 63, had to cut the back end off and splice 1 1/2' and cut the front corner and splice a pizza slice to fit too, out cab support needed to be cut the same way, almost seemed like we ended up fabricating it from scratch for how much we cut it up. Your videos have been so helpful to us, thank you so much! I need to work on my hammer and dolly work for sure too! been a long time since i used them.
Dean Urbanek good luck on the 63 man it should all come together
Going back to your red chevy you have made some of the best tech videos on youtube . this is by far one of the the best I have ever seen. thanks so much for sharing.
I agree, and if I can expand on this idea, I am a total virgin about doing this and watching each and every miniscule step matters. It is fascinating. A true tutorial, rather than a parts parade with some grab-ass idiots. Thank you!
You do amazing work. I used to be kind of bummed that my California C10 had a few rust holes in the floors, but I need to be grateful because it could be way worse.
Thank you for this great video, you do some amazing work and I am learning as I go and all of what you have done to your truck I will have to do to my 66 GMC. Thank you for this very informative and enlightening class!
Awesome job, Sir! I thought for sure that driver's side was going to be a beast to tackle when I first saw all the rust and rot, but the way you ate it up one piece at a time made it look easy. Great work.
you are so talented and you are an honorable man. I understand by what you were doing that you love your brother because of the work that you are doing on his truck only a brother that has love for his other brother can do something like this. may God bless you in anything that you do
As usual, great video! Can honestly say I didn't want it to end!
I`m Glad To See You Are Building A Truck To Haul All Your Best Of Show Trophies Home! That Red Truck Is Top Notch!
Looks like the kind of rust we get here in Maine. If you're lucky enough to rescue one before the crusher gets it. You do great work. Thanks for sharing.
wish we were related or neighbors, we enjoy a lot of the same hobbies. Love your videos mate.
I've watched a LOT of your videos and learned a great deal from all of them. Your truck is, I believe, a '62 while my truck is an '86 - both Chevies. My truck is badly rusted but not as bad as yours. The repair principles are exactly the same and now I can see just how to attack mine. So, I've not only gotten knowledge from your vids, I've gotten courage. LOL
Can't thank you enough for putting these videos up.
I can tell you this much I don’t want to do much work on my truck but after watching your videos I want to get Crackin thanks brother
Man, you really are rescuing that nice old truck! First time I have watched your channel and have subscribed. I really enjoy how you do your videos, showing more in ten minutes than most do in 10 videos. Thanks man, keep at it.
Just one word: AMAZING!!! Like the way you figure out in advance ways to endure your new pieces are going to be in the proper place. MOST IMPORTANT!!!
Enjoyed every second of this. love to watch talented people work.
Great work sr .God bless you👍
Tip of the hat to you, that's hardcore, most folks would have found another cab. Nice job.
Enjoying the progress. I like the 1x4 trick. Thanks for sharing.
Thank you for making these videos Steve. I'm going to have to do everything you're doing on my 63 gmc with the factory v6. Neat trick with the witness board. Just started on mine with the help of my 12 year old grandson. We are replacing all brake wheel cylinders and brake hoses right now. Gonna try the body work myself and if it doesn't work out, I think I'll trailer it up to you.LOL Wish you were my neighbor. Kenny
Great work and a lot of it. I learned a great deal about these panels. i didnt know it was in layers! Thanks for sharing! Great talent and great work!
Josh O Hernell Cool man Thanks for watching
Nice job as usual mate. Thanks for the update. Really appreciated as I learnt heaps from your C10 build as I'm sure I will from this one.
This guy is good, not afraid of the rust!
I see that almost all parts are still available, nice videos man, it's top restauration love to see and follow you doing this project.
Great fun to watch. Really thoughtful of you to go to so much trouble to make these videos. :)
Really good detail and narration. Thanks for teaching us!
Great job man and great video, your work is just perfect, never cutting corners (only the truck ones haha). Thumbs up !!
I'm a new subscriber and just want to thank you for showing your work so well and not having any music it's wonderful. Looking forward to seeing more of your work.
Great videos Gibson and great skills! I had to do some floor pan patches on my chevelle floor but my 65 C10 needs floor work, rockers , cab corner kick panel patches quite abit more extensive repair like you been doing . I think ill be able to tackle it after seeing your videos thanks so much!
Awsome renewing. Good jobb. you working it like an art.
I'm looking at doing the same fixes to my 64 and 66 c10. I also have a 64 c20. Though I don't think it'll be easy, after watching your videos, I know it's possible. Thanks for the videos
Thanks for watching
You are an amazing fabricator.
Your awesome man! I'm ready to tear into my projects! HERE WE GO!
chris Garland Cool deal man take it easy
Fixin to tear up something, the graps a claw hammer. Go man go. Thanks for the information and tricks.
I’ve fixed my truck after watching these videos
the low parts of these trucks Needs a design change.If you look at all of the chevy truck floors.where dose most of the dirt and water end up.You need to bring the floor up by 1 to 2 inches to divert the water away from any corners or low spots.Just buy doing that you will no longer have a floor issue again
thats a ton of work ....good job
Goodmorning Mister Gibson next time a truck out of a rust free state Nice job en thanks for the video
this is a very good video. It is really easy to watch with no crazy loud music, you do very good rust repair. I will be subscribing to your channel.
Love your quality. Especially for a garage guy.
You are pretty frickin amazing brother. Love watchin your videos. Keep it up
Great work. Thanks for posting.
I have to do this to a 76, and this was very helpful.
Bob
New to channel and I like your work man. Subscribed. Great build here.
Peter Lyons Thanks
outstanding job... u r a fabricator
Amazing really good video
Awesome work sir !
Hey we didn't get to hear the guitar man play! You are really getting down to the bare bones on this one.
awesome progress man
Awesome work there bud!!!!
Came out really nice.
wow good job. That was pretty impressive work.
Great job brudda! I had to re subscribe for some reason, but I've always learned something from your videos. I have to do this same thing to my 84 K30 but mine is the little worse than your truck. 👍
16:00 when you know it was all worth it :D GREAT video. Thanks!
Damn you make an artform outta this!
Can't wait to see it done!!!
I tip my hat to you sir. You are braver than I am
Looks great!
NICE Thanks for sharing!!!!!!!!!
Lookin good , tons of work
MrFireman164 Lots of work no doubt
Happy new year cant wait too see what you have coming up for us in 2020✌
Thanks for showing
Dam, nice work!
Really enjoy Gibson 63 videos. Lets see what happens
That's a good trick with the measuring stick.
you are a legend
You can tell you have been there & done that before!
Good vidéo congratulation from france!
Dreocita Thanks
Nice work
Great vídeo
👍🔨fine job !🆒
Thanks man
Good job brother
great vid
Philip Williams Thanks man
Dam your good .
Fixin to attempt the same thing on my 69 stepside, enjoyed the show, thanks man
Your getting lot's of practice!
Awesome video. For the non-welders who are looking to get this done, what's a fair price for this sort of work or asked another way, how many man-hours would you say this video entailed? Thanks!
Subscribed! Thanks for going through all the trouble of documenting this just to teach us with no personal benefit.
Did you ever consider having the cab blasted to see the cheese easier?
New sub here @gibson63 awesome work man keep it up
Quats C Thanks
Cool
Thanks.
Love these old trucks. Good to see someone helping save another. You are doing better about explaining every video.talking more, showing what your doing. What are your plans for the truck ?
Its like a big old rusty jig saw puzzle.
I wish they made those rear cab supports for the 73-87 trucks.
great work ! a dying art ! I have to do the same to my truck. What would be a good price to pay for the same work done . The cab corner , inner and outer rocker panels ? your advice would be appreciated. thank you
Nice guitars