How To Paint A Motorcycle Tank (Preparation Tutorial 2019)
ฝัง
- เผยแพร่เมื่อ 25 ต.ค. 2019
- Full step by step tutorial on How to Paint A Motorcycle Tank Preparation 2019. Tips, Tricks and problems you may find when attempting a job like this.
Link below for all equipment used in this video.
Tools:
Respirator:
amzn.to/30OWxJd
Body Filler:
amzn.to/2MeReQ5
Filler Application Blades:
amzn.to/2YSg1uC
Sanding Block:
amzn.to/2Wsr0xs
Wet and Dry Sandpaper:
amzn.to/2MaX6db
Air Blower:
amzn.to/2EBoV84
Dual Action Sander:
amzn.to/2WaiC6h
Dent Puller - Glue Gun Included:
amzn.to/2MbaPAH
Mixing Kit: Cups, Sticks, Filters:
amzn.to/2Wo55rh
Spray Guns: 1.8mm, 1.4mm, 1.0mm:
amzn.to/2WuA9FI
Mini Buff Polishing Pads:
amzn.to/2Qx8ajs
Cutting Compound:
amzn.to/2QuysTt
Machine Polish:
amzn.to/2YOP5Mv
Microfiber Clothes:
amzn.to/2WlsI3N
2K Primer:
amzn.to/2HFFtOd
2K Clear Coat:
amzn.to/2WuCTTw
Paint Reducer, Thinner:
amzn.to/2Mf7HDR
Wax and Grease Remover:
amzn.to/2HFP2gf
TACKlLife Rotary Grinder:
amzn.to/2HDSx8g
Plastex Repair Kit:
amzn.to/2YkJ0rv
Camera and gear used to shoot this video:
Camera:
Cannon M50
amzn.to/2EsgKdt
Over Head Camera:
Go pro HERO7 Black
amzn.to/2UyjxbW
Microphone:
Rode Video Pro R
amzn.to/2EHlRYC
Lighting:
Fovitec 20x28 softbox
amzn.to/2GYunVw
Tripod:
Benro slim / B&S head
amzn.to/2XxPYcA
This video was edited with Adobe Premiere Pro CC
www.adobe.com/
This description contains affiliate links. If you click on one of the links I will receive a small commission. These will help grow this channel and allow me to continue to make more content. Thank you for supporting the channel.
This Video:
In this video tutorial, I show you step by step how to paint a motorcycle tank along with some useful tips and how not to get caught by some of the common problems people have with this type of job. - ยานยนต์และพาหนะ
You are a legend! Thanks so much for creating these. You are a really good teacher. Great work and so helpful.
great info video with easy to follow instructions.
Absolutely cracking work. Thank you for sharing, I've subbed and I'm now binge watching.
Thank You, It's great to be appreciated.
I dig your videos!
G;day mate
dumb question I know but why did he use for the filler. like that putty stuff he put in the dent an was sanding to make it the shape off the tank? was it the Body Filler:
@t ????????
Hi bud. I have everything to clean a my panels ready for paint but have no idea what order to use them in.
Should i clean like this?
1) sugar soap nice and soapy to get most of the sanding residue/dust off
2) Then dry with a towel
3) Then a tack cloth
3) then 70% iso alcohol on some stockinette/polishing cloth to wipe down (tack cloths I have seem very sticky, so I guess I have to wipe down with some kind of solvent cleaner after?)
Would brake cleaner be better on the stockingette?
This might sound stupid/ocd to some but I painted once before and remember those tiny tiny bits of dust just ruining the job.
I always seem to just I introduce more dust when using a sponge and bucket
Hey, great question.
1. You don't have to sugar soap. Any soapy water will work fine.
2. Dry it with a cotton cloth, not a towel.
3. Use a wax and grease remover. Let it dry.
4. Tack cloth last using air at the same time to blow off any remaining dust.
5. When you paint, make sure that you are not under a roof like in a garage that is full of dust and crap. It will fall as soon as you start spraying and disturb the air. Blow the roof down with air before you start or even hang a sheet above your painting bench.
Good luck
Another ripper Kel, thanks so much. Quick question: Although I understand that the polyester filler is a two-part product (resin/body & hardener/catalyst) and that the blade putty is single part air-dry product, I am not sure why I should use blade putty rather than mixing up some more polyester filler. It seems to me that the polyester is harder, faster, better, or is it not? What's the advantage of using blade putty?
Hey mate, the reason that we use blade putty is that it fills pins holes in the poly filler. With poly filler you almost always get some small pin holes after you rub down. blade putty dries super fast, usually in 10 mins you can rub it down. It is also soft and easy to sand. In the time it takes to mix a little more poly the blade putty will already have dried.
Hope this helps..
@@howtowithkel3352 Hi Kel, that makes good sense. Thanks for explaining it so well.
Kel I am very impressed with your videos they short sweet and simple, I'm going to paint a vfr 400 nc30 once I prime should i wet and dry, then clean with de greaser, then paint the actual colour wet and dry clean then clear coat, if you could make a step by step guide on painting a farining that would be amazing, just a bit more In depth
Jake, I will make a video on this.
For now I will tell you this. If you have a good quality gun and a booth, you can spray from primer to clear without sanding or cleaning. The biggest problem with spraying is rubbish in the air that lands on the job. As a rule, check the surface for dust or bugs. If it is clean and within and hour or so of painting, go ahead and put on your next layer. If it is left overnight or there is dirt in the paint. Rub down with 600 grit wet and dry, clean and spray your next layer. Repeat, Repeat.
@@howtowithkel3352 hi kel
Does that same process of within 1 hour apply if I’m using 1k rattle cans ?
@@CR125MANIAC Hi, If the rattle cans are Acrylic then yes the above applies. If they are Enamel then wait until they are touch dry.
@@howtowithkel3352 great stuff I’ll be using acrylic.
I shall follow this advise as another person has advised the same
Thanks
Great video! I tried a few times but never managed to properly sand around the edges. Will try again tomorrow using your tips
Good Video mate BUT How did you prep! It? Cheers sorry if iv missed something but how did you prep! It ?
Walter white after retirement...
What primer do u use?
Hi, I use 2K moto spray. It's a HiChem product.